Oxygen Distribution Research Articles

Vasa Previa and the Role of Fetal Fibronectin and Cervical Length Surveillance: A Review.

Vasa previa is a pregnancy complication that occurs when unprotected fetal blood vessels traverse the cervical os, placing the fetus at high risk of exsanguination and fetal death. These fetal vessels may be compromised by fetal movement and compression, leading to poor oxygen distribution and asphyxiation. Diagnostic tools for vasa previa management and preterm labor (PTL) include transvaginal ultrasound, cervical length (CL) surveillance and use of fetal fibronectin (FFN) testing. These tools can prove to be quite useful as they allow for lead time in the prediction of PTL and spontaneous rupture of membranes which can result in devastating outcomes for pregnancies affected by vasa previa. We conducted a literature review on vasa previa management and the usefulness of FFN and CL surveillance in predicting PTL and found 36 related papers. Although there is limited research available to show the impact of FFN and CL surveillance in the management of vasa previa, there is sufficient evidence to support FFN and CL surveillance in predicting the onset of PTL, which can have devastating consequences for the pregnancies affected. It can be extrapolated that these tools, by helping to determine pregnancies at risk for PTL, could improve management and outcomes in patients with vasa previa. Future studies investigating the management of vasa previa with FFN and CL surveillance to reduce the burden of PTL and its associated comorbidities are warranted.

Recent changes of the dissolved oxygen distribution in the deep convection cell of the southern Adriatic Sea

The dynamics of dissolved oxygen in the ocean are of crucial importance for understanding marine ecosystems, with influences ranging from exchange with the atmosphere to biological processes and ocean circulation. In this study, we focus on the southern Adriatic Sea, an essential component of the Eastern Mediterranean “conveyor belt”, to investigate long-term oxygen dynamics and its driving factors. We use cross-platform datasets from 2013 to 2020, including remote sensing data, model reanalysis and in-situ observations from Argo floats, ocean gliders and ship-based measurements. Our analysis investigate the interplay of physical, biological and atmospheric forcing that drive oxygen variability. The distribution of dissolved oxygen in the southern Adriatic Sea is influenced by vertical mixing, advection of water masses and ecosystem dynamics. In the surface layer, the variability of dissolved oxygen is triggered by annual primary production and deep convection events. The dynamics in the intermediate and the deep layers are instead primarily influenced by physical processes, such as the vertical mixing and the water masses inflow from the adjacent sub-basins, which is driven by the periodic reversals of northern Ionian Gyre circulation. In particular our study reveals that the water masses advective dynamics driving the increase and decrease of dissolved oxygen have drastically changed in recent years. The highest dissolved oxygen concentrations are currently observed during the northern Ionian Gyre anticyclonic phase, while they have been previously documented during the cyclonic phase. This change appears to be connected with the significant increase in salinity observed in the southern Adriatic Sea in the same period and contributes to a better understanding of the processes that determine oxygen distribution in the Eastern Mediterranean basin.

Effect of horizontal magnetic field position on oxygen distribution in CZ silicon crystal growth

The horizontal magnetic field-assisted Czochralski(CZ) method is gaining significant popularity in the semiconductor industry for producing 200 mm semiconductor-grade silicon wafers. In this study, the impact of the horizontal magnetic field position on the oxygen content and radial uniformity of semiconductor-grade silicon crystals produced by the CZ method was investigated. Three-dimensional simulations were conducted using finite element software to calculate the melt convection and oxygen content before and after adjustment of the magnetic field position, respectively. The simulations results predicted a decrease in the oxygen content of the crystals following the adjustment of the magnetic field position from 0 to 75 mm below the free surface, and this was experimentally verified. The velocity distribution of the free melt surface exhibits better uniformity when lowering the magnetic field position. The influence of the magnetic field position on the temperature distribution and Marangoni flow in the melt was investigated, and the result of oxygen concentration difference identified the adjustment of the magnetic field position promoted the greater Marangoni flow below the free melt surface, which promoted the volatilization of SiO gas and thus reduced the oxygen concentration in the silicon ingot. Therefore, adjusting the position of the magnetic field is an effective way to increase the Marangoni flow and to obtain semiconductor-grade silicon crystal with lower oxygen content and better oxygen radial homogeneity.

Partial Oxidation of Methanol on Gold: How Selectivity Is Steered by Low-Coordinated Sites.

Partial methanol oxidation proceeds with high selectivity to methyl formate (MeFo) on nanoporous gold (npAu) catalysts. As low-coordinated sites on npAu were suggested to affect the selectivity, we experimentally investigated their role in the isothermal selectivity for flat Au(111) and stepped Au(332) model surfaces using a molecular beam approach under well-defined conditions. Direct comparison shows that steps enhance desired MeFo formation and lower undesired overoxidation. DFT calculations reveal differences in oxygen distribution that enhance the barriers to overoxidation at steps. Thus, these results provide an atomic-level understanding of factors controlling the complex reaction network on gold catalysts, such as npAu.

Synapse Neurotransmitter Channel-Inspired AlOx Memristor with "V" Type Oxygen Vacancy Distribution.

Memristor possesses great potential and advantages in neuromorphic computing, while consistency and power consumption issues have been hindering its commercialization. Low cost and accuracy are the advantages of human brain, so memristors can be used to construct brain-like synaptic devices to solve these problems. In this work, a five-layer AlOx device with a V-shaped oxygen distribution is used to simulate biological synapses. The device simulates synapse structurally. Further, under electrical stimulation, O2- moves to the Ti electrode and oxygen vacancy (Vo) moves to the Pt electrode, thus forming a conductive filament (CF), which simulates the Ca2+ flow and releases neurotransmitters to the postsynaptic membrane, thus realizing the transmission of information. By controlling applied voltage, the regulation of Ca2+ gated pathway is realized to control the Ca2+ internal flow and achieve different degrees of information transmission. Long-term Potentiation (LTP)/Long-term Depression (LTD), Spike Timing Dependent Plasticity (STDP), these basic synaptic performances can be simulated. The AlOx device realizes low power consumption (56.7 pJ/392 fJ), high switching speed (25ns/60ns), and by adjusting the window value, the nonlinearity is improved (0.133/0.084), a high recognition accuracy (98.18%) is obtained in neuromorphic simulation. It shows a great prospect in multi-value storage and neuromorphic computing.

Highly sensitive plate-like Bi2WO6 prepared by simple hydrothermal method

In this study, nanosheet-like Bi2WO6 is successfully prepared with a simple hydrothermal method and annealing step. The crystal structure, morphology, and element distribution of Bi2WO6 are analyzed by XRD, EDX, SEM, TEM, ESR and O2-TPD characterization methods. The results show that the prepare bismuth tungstate has no impurity elements, and the distribution of bismuth, tungsten, and oxygen are very uniform. After a detailed analysis of the sample, we also conduct XPS testing. This test is to further understand the surface composition and chemical state of the sample. The results of the XPS test are very clear, revealing that the vacancy oxygen (Ov) content in the sample is as high as 51.85 %. This also explains why bismuth tungstate has a smooth surface but has a high response to triethylamine. After gas sensing performance testing, it is found that Bi2WO6 has good selectivity and long-term stability towards the toxic and harmful triethylamine. At 220 °C, the detection response value for 100 ppm triethylamine gas is 25.5, with a sensor response time of 15 s and a recovery time of 17 s.

Optimizing membrane reactor structures for enhanced hydrogen yield in CH4 tri-reforming: Insights from sensitivity analysis and machine learning approaches

This study explores the optimization of membrane reactor configurations to enhance hydrogen production through CH4 tri-reforming. The investigation employs ceramic membranes for oxygen, vapor, and carbon dioxide distribution within the reactor bed. A differential evolution algorithm is utilized alongside cuckoo search algorithm (CSA) and support vector regression (SVR) to determine optimal values for O2/CH4, H2O/CH4, and CO2/CH4 ratios, membrane thickness, and shell pressure, with hydrogen yield as the objective function. Results demonstrate that the oxygen membrane reactor achieves the highest hydrogen yield, reaching 2.02 and 1.75 for direct methanol synthesis and Fischer–Tropsch processes, respectively, representing a 7.98 % and 10.03 % increase compared to the conventional tri-reforming reactor. Furthermore, CSA and SVR emerge as invaluable tools, facilitating robust optimization and predictive modeling. The CSA efficiently navigates complex solution spaces to identify optimal parameters, while SVR accurately models relationships between input variables and hydrogen yield. Incorporating these methodologies enhances the effectiveness of membrane reactor design and synthesis gas production. This study contributes to advancements in clean energy technologies by providing insights into efficient hydrogen production methods using membrane reactors.

The Responses of Pollen Tubes to Spermidine Treatments in Actinidia deliciosa

In this study, the responses of pollen tubes to spermidine treatments (10 µM, 25 µM, 50 µM, 100 µM, 250 µM, or 500 µM) were investigated in Actinidia deliciosa, by focusing on pollen germination rate, pollen tube length, organizations of actin filaments, concentrations of Ca+2, pH, reactive oxygen species and distributions of callose and cellulose. According to findings, the only positive effect was detected after 10 µM spermidine treatment while the most negative acute effect was detected after 500 µM spermidine treatment and, further experiments were done in these groups. 10 µM spermidine increased the pollen tube length by changing the concentration of apex localized reactive oxygen species. 500 µM spermidine decreased the pollen tube length by changing the apex localized Ca+2, pH, and reactive oxygen species concentration. Findings would contribute to the understanding of the effects of polyamines on pollen tubes.

Preparation and Properties of Sodium Alginate/Platelet Rich Plasma-MgO2 Porous Microcarriers

The porous microcarriers of sodium alginate/platelet rich plasma-MgO2 (SA/PRP-MgO2) were prepared using an emulsion method combined with a freeze-drying method. The effects of the content of MgO2 on the morphology of the microcarriers, swelling ratio, and oxygen release were studied. The results showed all porous microcarriers with various contents of MgO2 showed an interconnective porous structure, with an average particle size of 150–350 μm. The pore size, swelling ratio, and oxygen release of the microcarriers increased with increasing content of MgO2 in the microcarriers. Therefore, MgO2 may be used to overcome hypoxia in the SA/PRP porous microcarriers and to improve oxygen distribution for longer cell viability.

Study on Structure and Reducibility of Iron Ore Sinter Containing Basic Oxygen Furnace Slag

Basic Oxygen Furnace (BOF) slag is a byproduct of the steelmaking process. The amount of slag produced in steel production lines is substantial, not only in Vietnam but also worldwide. Reusing this large amount of slag is an essential requirement, and this study assesses a solution for reusing BOF slag by incorporating it into the sintering process. Experiments were conducted using iron ore, coal, and slag as raw materials for the sintering process using a suction fan apparatus. The sintered product was analyzed for its microstructure, reduction degree, and softening properties. The results indicate that the reducibility of the sinter containing the slag is equivalent to that without slag. The yield of sintered ore decreases by approximately 1% compared to when the slag from steelmaking is used as a flux. The results show that the yield of sintered products meeting standards (size and strength) has values ranging from 59.5 to 71.9%. Besides, the highest reduction degree was achieved with a 24% slag at a basicity of 1.6 and a temperature of 1100 °C. In contrast, the reduction degree of the sintered ore was lower at 1000 °C. The initial softening temperature was determined to be 1200 °C. The microstructure of the sintered ore revealed the formation of a liquid bonding phase. It can be concluded that the main bonding phase is calcium ferrite. The liquid phase showed an even distribution of calcium, silicon, oxygen, and iron elements.

Mitigating ash-related alkali and heavy metals emissions in rotary kiln through oxygen-carrier-aided combustion of waste

Rotary kiln (RK) incineration technology gains prominence in waste management, aiming to reduce pollution, recover energy, and minimize waste. Oxygen-carrier (OC)-aided incineration of waste in the RK demonstrates notable benefits by enhancing oxygen distribution uniformity and facilitating fuel conversion. However, the effects of OC on ash-related alkali and heavy metals during waste incineration in the RK remain unknown. In this study, manganese ore and ilmenite as OCs are introduced into RK during waste combustion, focusing on their effects on the bottom ashes and the behavior of alkali and heavy metals. Results show that manganese ore exhibits a decreasing reactivity due to oxygen depletion during the conversion from Mn2O3 to Mn3O4, while ilmenite maintains good reactivity due to sustained enrichment of Fe2O3 on the particles even after multiple cycles in RK. The porous structure on the surface of OCs particles verifies the cyclic reaction involving oxidation by air and reduction by fuel as OCs move between the active and passive layers of the bed. The porous OCs particles offer abundant adsorption sites for K from the gaseous phase, with surface-deposited K migrating into the particles and enhancing the OCs' capacity for K adsorption. Adding OCs promotes the formation of stable, less volatile compounds of heavy metals (As, Cr, Pb, and Zn) and enhances their retention in bottom ash while ensuring the leaching toxicity remains below Chinese national standard limits. This study enhances the understanding of OCs in incineration, guiding vital references for waste management practices and environmental sustainability.

Assessment of the Hydrochemical Characteristics of the Carbon Observational Site ‘Carbon-Sakhalin’ (Aniva Bay, Sea of Okhotsk)

Following a tendency of many economies to shift towards carbon neutrality, there came the necessity for certain regions to be assessed in terms of their greenhouse gas emissions from the ocean. A carbon polygon was created in Sakhalin Oblast in order to evaluate the carbon balance of this marine ecosystem in a sub-arctic region, with the possibility of deploying carbon farms for additional CO2 absorption. To obtain such an assessment, it seems crucial to analyze hydrochemical parameters that reflect the situation of the marine environment in Aniva Bay as a basis of the carbon polygon. The article presents the results of the analysis of hydrochemical parameters in Aniva Bay waters and their spatial and seasonal variability. This research was based on available published sources and measurement databases for the period of 1948–1994. Additionally, the review uses hydrochemical data for Aniva Bay in 2001–2013 weather station data for the period of 2008–2023 and weather station data for 2008–2023. Some tendencies were discovered for spatial and temporal distributions of oxygen, pH, and biogenic matter (inorganic phosphorus, inorganic nitrogen, silicon). In surface layers, the mean oxygen year maximum (9.1 mg/L) is registered with the beginning of photosynthesis, i.e., immediately after the ice melting in April. The highest pH values 8.26 are registered in the euphotic layer in May. The lowest pH values was in August (7.96) in the near-bottom layer. The maximum annual P-PO4 registered on the surface (>18 µg/L) immediately after ice melting, with a minimum (7.17 µg/L) at the end of July. Si-SiO3 concentrations have two maximums: at the end of June and at the beginning of October. N-NO2 concentration on the surface is >2 µg/L in mid-July and on the 50 m depth it is >3.5 µg/L in mid-September. Some spatial patterns of hydrochemical parameters were shown based on the analysis of maps.

Defecation after magnesium supplementation enhances cognitive performance in triathletes

Constipation is correlated with diminished cognitive function, revealing a possible rectum-brain connection. In this counter-balanced crossover trial, 13 elite triathletes underwent a Stroop test to assess cognitive function and executive control. The Stroop test was conducted both with and without magnesium oxide intake, with a 1-week washout period between sessions. Oxygenation and blood distribution during the cognitive challenge were measured using Near-Infrared Spectroscopy (NIRS). Measurements were taken in both the prefrontal brain and the sub-navel region, where the highest glucose uptake was detected under the 18F-fluorodeoxyglucose Positron Emission Tomography (PET) scan. A significant reduction in completion time for the Stroop test was observed after defecation compared to the non-defecated condition (non-defecation: [27.1 ​± ​1.1] s; non-magnesium defecation: [24.4 ​± ​0.9] s; magnesium defecation: [23.4 ​± ​0.8] s, p ​< ​0.05). Stroop test performance was improved in all (100%, 13/13) of the participants after magnesium-induced defecation and most (69%, 9/13) of the participants after non-magnesium-induced defecation. While no alterations in oxygenation and blood distribution were observed in the prefrontal brain during the Stroop test, decreased oxygenation levels were observed in the sub-navel region under both defecated conditions, without significant changes in blood distribution (p ​< ​0.05). This data suggests an acute increase in oxygen consumption at this specific region. The result of this study suggests an unexplored causal link between the state of the rectum and cognitive performance. Magnesium supplementation to improved rectal emptying presents a novel application for optimizing cognitive function in athletes navigating intricate racing conditions.

The trapping effect of transitional metals on oxygen in Mo from first-principles calculations

The trapping effect of solute on oxygen (O) can be benefit for inhibiting its segregation and embrittlement at the GBs in Mo alloys. In this work, the interaction between solutes (including 27 transition metals), interstitial O and vacancy in Mo are implemented by first-principles calculations, and their trapping effects on O are evaluated by Simonovic’s model. Single transition metal solute (TMS) has a strong attraction for O, and it is strengthened by the second solute for all 3d, oversized 4d and 5d series. Furthermore, there is a significant synergistic effect between solute, vacancy, and oxygen for oversized solutes, i.e., the binding energy between solute atom (vacancy) and oxygen atoms is enhanced by the presence of vacancy (solute). The distribution of oxygen indicates that oxygen can be captured by dilute TMS atoms, and more oxygen atoms will be trapped as the solute concentration increases in Mo. Based on our extensive calculations, Sc, Ti, Zr, Hf, and Ta can be the top priority for suppressing the segregation and embrittlement of O in Mo alloys. It is interesting that the interaction between solute and O can be accurately separated into elastic and chemical contributions though delicate calculation, and the counterintuitive strong binding effect of fifth-nearest solute-O pairs for undersized 4d and 5d elements is owning to the chemical contribution driven by Coulomb interaction.

A Study of the Hot Salt Corrosion Behavior of Three Nickel-Based Single-Crystal Superalloys at 900 °C

A study of the hot salt corrosion behavior of three nickel-based single-crystal superalloys at 900 °C was conducted. We discovered that the corrosion layer on each alloy was distinctly enriched with Mo, Ni, S, and O, primarily comprising sulfides and oxides. Notably, variations in oxygen distribution across the alloys revealed that the elemental composition plays a pivotal role in their corrosion resistance. These insights not only advance our understanding of the mechanisms driving thermal corrosion in nickel-based single-crystal superalloys but also lay the groundwork for designing alloys with enhanced durability tailored to high-temperature applications. This research marks a significant step toward the optimal design and utilization of superalloys in sectors demanding exceptional material stability under thermal stress.

Effects of three-dimensional type flow fields on mass transfer and performance of proton exchange membrane fuel cell

Developing state-of-the-art bipolar plate structures, to optimize fluid distribution, is essential to achieve better cell performance. In this paper, a three-dimensional model of PEMFC is developed and two cathode-side flow field structures are designed: two-dimensional and three-dimensional types. The two-dimensional type is the traditional “bipolar plate + gas diffusion layer” flow field structure, easily resulting in uneven distribution of reactant gas and other problems. This study describes three novel three-dimensional type flow fields (metal foam, fine-mesh, and wire-mesh). Through comprehensive performance analysis using numerical simulations, it is found that the three-dimensional type flow fields significantly improve mass transfer and output performance compared to two-dimensional type flow fields. The proposed three-dimensional type flow fields create forced convective fluid flow. It further enhances the diffusion dispersion of reactant gas, thus making fuller use of the active region. Among them, the wire-mesh flow field shows the best performance in terms of oxygen distribution, water distribution and electrical properties. The net output power density produced is 0.75068 W cm−2, higher than parallel flow field by 32.78%.

Unraveling the role of inert biomass in membrane aerated biofilm reactors for simultaneous nitrification and denitrification

This study presents an innovative 2D spatio-temporal model that sheds light on the intricate formation of biofilms, incorporating two essential biomass decay pathways: cell lysis and endogenous respiration. The model encompasses heterotrophic bacteria (HB), anaerobic heterotrophic bacteria (AHB), and autotrophic bacteria (AB), offering a comprehensive understanding of multi-species biofilm development. Through meticulous simulations, we explore the primary mechanisms behind inert biomass formation in biofilms, revealing the key roles played by the lysis of HB, AHB, and AB, as well as the endogenous respiration of HB. Moreover, the simulations reveal how species of higher abundance contribute significantly to inert biomass generation, reshaping our understanding of biofilm dynamics. Crucially, this study highlights the indispensability of considering biofilm inert biomass when modeling the nitrification and denitrification behaviors of a membrane aerated biofilm reactor (MABR). The distribution of oxygen and acetate across biofilm thickness is remarkably different when inert biomass is factored in, underscoring the necessity for a more holistic approach to modeling biofilm behavior. With the introduction of the inert biomass inclusive biofilm model, our simulations explore the interactive effects of key process conditions - bulk concentrations of oxygen ($O_{\infty}$), ammonium nitrogen ($N_{1\infty}$), acetate ($A_{\infty}$), and biofilm thickness - on the nitrification and denitrification performance of MABR. A compelling correlation emerges between higher bulk concentrations of oxygen and ammonium nitrogen and optimal nitrification rates, achieving an impressive range of 0.3 to 1.1 g ammonium/$m^{2}/d. Delving into denitrification, we observe that high $O_{\infty}$, low $N_{1\infty}$, and either high or low $A_{\infty}$ levels impede AHB formation and consequently hinder denitrification. Our findings provide a roadmap for achieving simultaneous nitrification and denitrification, contingent on specific conditions: $10[gm^{-3}] &lt; O_{\infty} &lt; 15[gm^{-3}]$, $12[gm^{-3}] &lt; N_{1\infty} &lt; 20[gm^{-3}]$, $A_{\infty}$ ranging from $3[gm^{-3}]$ to $12[gm^{-3}]$, and a biofilm thickness $&gt; 1.4[mm]$. While our study reveals promising avenues for simultaneous nitrification and denitrification, denitrification rates still lag behind nitrification rates under the same conditions. As a result, we advocate for further investigations to devise strategies that can enhance denitrification in MABR systems. In conclusion, this study advances our knowledge of biofilm dynamics by introducing a comprehensive model and illuminating the key factors driving nitrification and denitrification performance in MABRs. These findings pave the way for improved biofilm engineering and wastewater treatment strategies, opening new horizons for sustainable environmental practices.

Oxygen Distribution at the Hot Spot in BOF Steelmaking

The distribution of oxygen between the gaseous and liquid oxidation products at the hot spot is modeled. The simplified model accurately describes the interaction of the gas jet exiting the lance nozzles with the gaseous surrounding of the jet. This interaction changes the chemical composition of the gas jet influencing the subsequent interaction with the hot spot. The iterative procedure then calculates the chemical composition of the gas exiting the cavity. The characterization of the exiting gas flowing past the lance head as well as the generation rate of FeO is attained by combining the modeled gas composition exiting the cavity with an oxygen mass balance based on a quasi-stationary BOF operation.

Flow field optimization for performance enhancement of planar solid oxide fuel cells

The flow field design is very essential to the material distribution uniformity and overall output performance of planar solid oxide fuel cells. In this paper, the structure of the external manifold and cathode side interconnect is optimized to solve the uneven flow field distribution problem. The effects of crucial geometric parameters on the internal mass transfer, component transport, electrochemical reaction, temperature field and overall output performance of the fuel cell are studied by three-dimensional multi-physics numerical simulation. It is found that the combination of the three-inlet-two-outlet external manifold and cylindrical ribbed interconnect significantly reduces the uneven gas distribution between different channels and greatly improves the diffusion of oxygen under the ribs, thus enhancing the overall output performance of SOFC. Increasing the number of cylindrical ribs is beneficial to the transport and uniform distribution of oxygen. However, the excessive number of cylindrical ribs will hinder oxygen diffusion to the end of the flow channel, resulting in increased concentration polarization along the flow channel. Moreover, reducing the total contact area of the ribs enhances oxygen diffusion beneath the ribs but also raises the contact resistance and may deteriorate the cell performance.

Effects of Carbon Black Surface Modification on the Morphology and Properties in Blends with Natural Rubber Studied with High‐Resolution X‐Ray Computed Tomography

AbstractTo elucidate the specific mechanical impact of carbon black (CB) filler–rubber interactions on reinforcement, CB particles are subjected to graphitization at 1300 °C and oxidation through concentrated nitric acid treatment to modulate their surface activity. Alongside untreated CB particles, the influence of surface activity and the oxygen distribution are investigated to assess their role in shaping CB aggregate structures using X‐ray absorption spectrum (XAS) and X‐ray computed tomography (CT) with spatial resolution of 30 nm. Meanwhile, virgin and modified CBs are blended in natural rubber with varying amounts (10, 30, 50 phr) and the aggregates distributions in rubber are investigated by nano‐CT. Combined with the mechanical properties of rubber composites and parameters of filler networks, the mechanical contributions arising from filler–rubber interactions are quantified. The findings underscore the robust interactions between oxidized CB and rubber matrix, exhibiting a mechanical property enhancement ratio of ≈59.2% at low strains in comparison to normal CB filler. The results indicate the synergies encompass of filler network, rubber chains, and filler–rubber interactions all play important roles for reinforcement, which aligns with the broader understanding of filler–rubber interactions and CB reinforcement mechanisms.