The formation of Ti silicides has been examined in flash memories with 0.25 μm linewidth by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. It has been observed that, after the first rapid thermal process and the selective metal etch, there is no silicide on the source and on a majority of drain contacts while C49-TiSi 2 is found on the gate. A pre-amorphisation implant increases drastically the formation of C49-TiSi 2 in the drain zone while modifications of annealing conditions have little impact. These results indicate that the formation of C49-TiSi 2 is most likely controlled by nucleation and that this nucleation is sensitive to both the width and the length of the reaction zone. The formation of a Ti rich silicide may play an important role in this nucleation by decreasing the driving force for the formation of C49-TiSi 2. Curiously enough, the formation of C49-TiSi 2 appears thus as a major concern for the salicide process in flash memories.