Abstract

The diffusion of nitrogen into Ti silicide films allows the performance of complementary metal oxide semiconductor (CMOS) components to be improved. In this work, the thermochemical treatment is carried out in an expanding microwave plasma reactor using (Ar-33%N2-1%H2) gas mixtures. This process promotes the chemical reactions on the surface of metals. The diffusion of nitrogen into the film is improved by the reducing effect of NHx and/or H species towards passive layers such as oxides which form a barrier of diffusion in the surface layers during the process. The simultaneous formation of Ti nitrides and silicides at the surface and at the film-substrate interface, respectively gives rise to two competing processes which result in the growth of the Ti nitride phase at the expense of the Ti silicide phase at a critical temperature of 800°C. This paper reports on a comprehensive analysis of the evolution of TiSi2 and TiN phases and microstructural properties of films by means of X-ray diffraction, Raman spectroscopy, transmission electron microscopy and selected area electron diffraction investigations. Square shaped crystals of TiN are identified on the top of round shaped crystals of TiSi2. The growth of the TiN phase at the expense of TiSi2 induces a catastrophic decrease of the intensity of the (040) diffraction line of TiSi2 and a huge increase of the (220) reflection line of TiN. The microstructural properties changes during the process such as the formation of TiN crystals of nanometric size in the bulk of the TiSi2 phase as well as the migration of free Si which epitaxially grows at the film-substrate interface have been evidenced by very detailed investigations for the first time. The results are related to the mechanism of formation of TiN from the reaction between TiSi2 and nitrogen.

Highlights

  • Refractory transition metal silicides are well known for applications such as contacts and submicrometer gate source and drain areas in complementary metal oxide semiconductor technology (CMOS)

  • The TiSi2 compound has been extensively studied in the 80s-90s because it shows the lowest resistivity equal to 15 μΩcm, it can be self-aligned to form Al/TiSi2/Si contact systems and it is synthesized by rapid thermal annealing (RTA) of Ti films coated on Si substrates

  • transmission electron microscopy (TEM) as well as selected area electron diffraction (SAED) investigations conducted on Ti films processed for durations corresponding to three different key-stages of the growth of TiN allowed the morphology and microstructure of films to be described in detail

Read more

Summary

Introduction

Refractory transition metal silicides are well known for applications such as contacts and submicrometer gate source and drain areas in complementary metal oxide semiconductor technology (CMOS). They exhibit high temperature stability, low resistivity, chemical compatibility, electron migration resistance and low Schottky barrier height. The TiSi2 compound has been extensively studied in the 80s-90s because it shows the lowest resistivity equal to 15 μΩcm, it can be self-aligned to form Al/TiSi2/Si contact systems and it is synthesized by rapid thermal annealing (RTA) of Ti films coated on Si substrates.. Because of the great reactivity of Ti, the Ti-Si reaction is very complex, and it extends both in the growth direction and laterally. The lateral growth of TiSi2 induces shorting between gate and.

Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call