With the emergence of nonplanar CMOS devices at the 22-nm node and beyond, it is highly likely that multigate device adoption will occur in a high-performance process technology, owing to the increased performance and area benefits. In this paper, for the first time, we evaluate symmetric (Symm-Φ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">G</sub> ) and asymmetric (Asymm-Φ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">G</sub> ) gate-workfunction FinFETs head to head in a high-performance process, using technology computer-aided design 3-D device simulations. We demonstrate that Asymm-Φ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">G</sub> shorted-gate (a-SG) n/p-FinFETs, which use both workfunctions corresponding to typical high-performance metal-gate n/p-FinFETs, are promising, as they can yield over two orders of magnitude lower leakage without excessive degradation in ON-state current, in comparison to Symm- ΦG shorted-gate (SG) FinFETs, placing them in a better position than back-gate biased independent-gate (IG) FinFETs for leakage reduction. Thereafter, we explore the design space of FinFET logic gates, latches, and flip-flops, for optimal tradeoffs in leakage versus delay and temperature, using mixed-mode 2-D device simulations. Elementary logic gates (such as INV, NAND2, NOR2, XOR2, and XNOR2) using Asymm-Φ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">G</sub> SG-mode FinFETs appear to be located optimally in the leakage-delay spectrum, in comparison to the most versatile configurations possible by mixing corresponding Symm-Φ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">G</sub> SG- and IG-mode FinFETs. Latches and flip-flops, however, require an astute combination of Symm-Φ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">G</sub> and Asymm-Φ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">G</sub> FinFETs to optimize leakage, delay, and setup time simultaneously.