Use Of Antimicrobial Peptides Research Articles

Opposing Effects of PhoPQ and PmrAB on the Properties of Salmonella enterica serovar Typhimurium: Implications on Resistance to Antimicrobial Peptides.

The increasing number of resistant bacteria is a major threat worldwide, leading to the search for new antibiotic agents. One of the leading strategies is the use of antimicrobial peptides (AMPs), cationic and hydrophobic innate immune defense peptides. A major target of AMPs is the bacterial membrane. Notably, accumulating data suggest that AMPs can activate the two-component systems (TCSs) of Gram-negative bacteria. These include PhoP-PhoQ (PhoPQ) and PmrA-PmrB (PmrAB), responsible for remodeling of the bacterial cell surface. To better understand this mechanism, we utilized bacteria deficient either in one system alone or in both and biophysical tools including fluorescence spectroscopy, single-cell atomic force microscopy, electron microscopy, and mass spectrometry (MoskowitzS. M.;Antimicrob. Agents Chemother.2012, 56, 1019−103022106224; ChengH. Y.;J. Biomed. Sci.2010, 17, 6020653976). Our data suggested that the two systems have opposing effects on the properties of Salmonella enterica. The knockout of PhoPQ made the bacteria more susceptible to AMPs by making the surface less rigid, more polarized, and permeable with a slightly more negatively charged cell wall. In addition, the periplasmic space is thinner. In contrast, the knockout of PmrAB did not affect its susceptibility, while it made the bacterial outer layer very rigid, less polarized, and less permeable than the other two mutants, with a negatively charged cell wall similar to the WT. Overall, the data suggest that the coexistence of systems with opposing effects on the biophysical properties of the bacteria contribute to their membrane flexibility, which, on the one hand, is important to accommodate changing environments and, on the other hand, may inhibit the development of meaningful resistance to AMPs.

Лікарські засоби, основою яких є молекулярні структури антимікробних пептидів, та терапевтичні можливості в лікуванні інфекційних захворювань респіраторного тракту (частина 2)

На даний час у лікарській практиці вже продемонстрована ефективність застосування антимікробних пептидів у лікуванні місцевого інфекційного процесу, наприклад дериватів кателіцидину (оміганану), дефензиноміметика (брилацидину), α-спірального магаїніну (пексиганану), синтетичного протимікробного пептидоміметика (літиксару). Однак препарати цієї групи, які, можливо, будуть рекомендовані для лікування пневмоній, знаходяться на ранніх стадіях дослідження. Створення нових антимікробних пептидів із високим терапевтичним індексом (співвідношення бактерицидності і токсичності) та вирішення питання доставки їх в осередок ураження легені у хворих з інфекційними захворюваннями, у тому числі і респіраторного тракту, дозволить досягти ерадикації бактерій з мультимедикаментозною резистентністю. Даний напрямок дасть змогу відкрити постантибіотичну еру в широкій практичній діяльності терапевтів, педіатрів, хірургів та лікарів інтенсивної терапії.

Antimicrobial Peptides with Antibacterial Activity against Vancomycin-Resistant Staphylococcus aureus Strains: Classification, Structures, and Mechanisms of Action.

The emergence of bacteria resistant to conventional antibiotics is of great concern in modern medicine because it renders ineffectiveness of the current empirical antibiotic therapies. Infections caused by vancomycin-resistant Staphylococcus aureus (VRSA) and vancomycin-intermediate S. aureus (VISA) strains represent a serious threat to global health due to their considerable morbidity and mortality rates. Therefore, there is an urgent need of research and development of new antimicrobial alternatives against these bacteria. In this context, the use of antimicrobial peptides (AMPs) is considered a promising alternative therapeutic strategy to control resistant strains. Therefore, a wide number of natural, artificial, and synthetic AMPs have been evaluated against VRSA and VISA strains, with great potential for clinical application. In this regard, we aimed to present a comprehensive and systematic review of research findings on AMPs that have shown antibacterial activity against vancomycin-resistant and vancomycin-intermediate resistant strains and clinical isolates of S. aureus, discussing their classification and origin, physicochemical and structural characteristics, and possible action mechanisms. This is the first review that includes all peptides that have shown antibacterial activity against VRSA and VISA strains exclusively.

Trends in Managing Cardiac and Orthopaedic Device-Associated Infections by Using Therapeutic Biomaterials.

Over the years, there has been an increasing number of cardiac and orthopaedic implanted medical devices, which has caused an increased incidence of device-associated infections. The surfaces of these indwelling devices are preferred sites for the development of biofilms that are potentially lethal for patients. Device-related infections form a large proportion of hospital-acquired infections and have a bearing on both morbidity and mortality. Treatment of these infections is limited to the use of systemic antibiotics with invasive revision surgeries, which had implications on healthcare burdens. The purpose of this review is to describe the main causes that lead to the onset of infection, highlighting both the biological and clinical pathophysiology. Both passive and active surface treatments have been used in the field of biomaterials to reduce the impact of these infections. This includes the use of antimicrobial peptides and ionic liquids in the preventive treatment of antibiotic-resistant biofilms. Thus far, multiple in vivo studies have shown efficacious effects against the antibiotic-resistant biofilm. However, this has yet to materialize in clinical medicine.

S05.3: Potential use of antimicrobial peptide LL‐37 as a vaginal multipurpose prevention technology (MPT) reagent with spermicidal and microbicidal activity

S05.3: Potential use of antimicrobial peptide LL‐37 as a vaginal multipurpose prevention technology (MPT) reagent with spermicidal and microbicidal activity

Osseointegration and antibacterial effect of an antimicrobial peptide releasing mesoporous titania implant.

Medical devices such as orthopedic and dental implants may get infected by bacteria, which results in treatment using antibiotics. Since antibiotic resistance is increasing in society there is a need of finding alternative strategies for infection control. One potential strategy is the use of antimicrobial peptides, AMPs. In this study, we investigated the antibiofilm effect of the AMP, RRP9W4N, using a local drug-delivery system based on mesoporous titania covered titanium implants. Biofilm formation was studied in vitro using a safranine biofilm assay and LIVE/DEAD staining. Moreover, we investigated what effect the AMP had on osseointegration of commercially available titanium implants in vivo, using a rabbit tibia model. The results showed a sustained release of AMP with equal or even better antibiofilm properties than the traditionally used antibiotic Cloxacillin. In addition, no negative effects on osseointegration in vivo was observed. These combined results demonstrate the potential of using mesoporous titania as an AMP delivery system and the potential use of the AMP RRP9W4N for infection control of osseointegrating implants.

Use of Antimicrobial Peptides Against SARS-CoV-2: Today is the Future: Retraction.

[This retracts the article DOI: 10.1097/IM9.0000000000000050.].

A composite hydrogel with co-delivery of antimicrobial peptides and platelet-rich plasma to enhance healing of infected wounds in diabetes

Diabetic wound healing remains a major challenge due to its vulnerability to bacterial infection, as well as the less vascularization and prolonged inflammatory phase. In this study, we developed a hydrogel system for the treatment of chronic infected wounds, which can regulate inflammatory (through the use of antimicrobial peptides) and enhance collagen deposition and angiogenesis (through the addition of platelet-rich plasma (PRP)). Based on the formation of Schiff base linkage, the ODEX/HA-AMP/PRP hydrogel was prepared by mixing oxidized dextran (ODEX), antimicrobial peptide-modified hyaluronic acid (HA-AMP) and PRP under physiological conditions, which exhibited obvious inhibition zones against three pathogenic bacterial strains (E. coli, S. aureus and P. aeruginosa) and slow release ability of antimicrobials and growth factors. Moreover, CCK-8, live/dead fluorescent staining and scratch test confirmed that ODEX/HA-AMP/PRP hydrogel could facilitate the proliferation and migration of L929 fibroblast cells. More importantly, in vivo experiments further demonstrated that the prepared hydrogels could significantly improve wound healing in a diabetic mouse infection by regulating inflammation, accelerating collagen deposition and angiogenesis. In addition, prepared hydrogel showed a significant antibacterial activity against S. aureus and P. aeruginosa, inhibited pro-inflammatory factors (TNF-α, IL-1β and IL-6), enhanced anti-inflammatory factors (TGF-β1) and vascular endothelial growth factor (VEGF) production. The findings of this study suggested that the composite hydrogel with AMP and PRP controlled release ability could be used as a promising candidate for chronic wound healing and infection-related wound healing.

L-Threonine upregulates the expression of β-defensins by activating the NF-κB signaling pathway and suppressing SIRT1 expression in porcine intestinal epithelial cells.

The use of antimicrobial peptide (AMP), found in all forms of life and playing a pivotal role in the innate immune system, has been developed as a new strategy for maintaining intestinal health and reducing antibiotic usage due to its ability to resist pathogens and commensal microbes. The current study investigated the effects of l-threonine on β-defensin expression, the intestinal mucosal barrier and inflammatory cytokine expression in porcine intestinal epithelial cell lines (IPEC-J2). The results revealed that in IPEC-J2 cells, l-threonine significantly increased the expression of β-defensin (including pBD-1, pBD-2, and pBD-3) in a dose- and time-dependent manner (P < 0.05). By using different concentrations and treatment times of l-threonine, the results showed that the expression of β-defensin was upregulated to the greatest extent in IPEC-J2 cells cultured with 1 mM l-threonine for 24 h. Although the mRNA expression levels of β-defensins were markedly increased (P < 0.05), there was relatively little inducible pBD-1, pBD-2 and pBD-3 mRNA expression at the sub-confluent and confluent densities in comparison with post-confluent densities. Furthermore, we found that l-threonine enhanced the β-defensin expression by suppressing the expression of SIRT1, which increased acetylated p65 expression, and activating the NF-κB signaling pathway, which induced the translocation of p65 from the cytoplasm to the nucleus. In addition, l-threonine significantly prevented LPS-induced intestinal mucosal barrier damage by attenuating the decreasing tendency of the mRNA expression of Mucin1 and Mucin2 (P < 0.05). Simultaneously, l-threonine enhanced the expression of β-defensins upon LPS challenge in IPEC-J2 cells (P < 0.05). l-Threonine obviously decreased the mRNA expression of inflammatory cytokines compared to that in untreated cells (P < 0.05). In conclusion, l-threonine can upregulate β-defensin expression and reduce inflammatory cytokine expression in IPEC-J2 cells; meanwhile, l-threonine alleviates LPS-induced intestinal mucosal barrier damage in porcine intestinal epithelial cells. The l-threonine-mediated modulation of endogenous defensin expression may be a promising approach to reduce antibiotic use, enhance disease resistance and intestinal health in animals.

Identification of Antimicrobial Peptides Using Chou’s 5 Step Rule

With the advancement in cellular biology, the use of antimicrobial peptides (AMPs) against many drug-resistant pathogens has increased. AMPs have a broad range of activity and can work as antibacterial, antifungal, antiviral, and sometimes even as anticancer peptides. The traditional methods of distinguishing AMPs from non-AMPs are based only on wet-lab experiments. Such experiments are both time-consuming and expensive. With the recent development in bioinformatics more and more researchers are contributing their effort to apply computational models to such problems. This study proposes a prediction algorithm for classifying AMPs and distinguishing between AMPs and non-AMPs. The proposed methodology uses machine learning algorithms to predict such sequences. A dataset was formulated based on 1902 samples of AMPs and 3997 samples of non-AMPs. Machine learning algorithms are trained on a fixed number of succinct coefficients retaining sequence and composition information of primary structures. The features are extracted using position relative incidence and statistical moments. System performance is validated via various validation tests including a 10-fold cross-validation approach. An overall accuracy of 95.43% was achieved. A comparison of results with existing methodologies shows that the proposed methodology outperformed existing methodologies in terms of prediction accuracy.

Antimicrobial and Amyloidogenic Activity of Peptides. Can Antimicrobial Peptides Be Used against SARS-CoV-2?

At present, much attention is paid to the use of antimicrobial peptides (AMPs) of natural and artificial origin to combat pathogens. AMPs have several points that determine their biological activity. We analyzed the structural properties of AMPs, as well as described their mechanism of action and impact on pathogenic bacteria and viruses. Recently published data on the development of new AMP drugs based on a combination of molecular design and genetic engineering approaches are presented. In this article, we have focused on information on the amyloidogenic properties of AMP. This review examines AMP development strategies from the perspective of the current high prevalence of antibiotic-resistant bacteria, and the potential prospects and challenges of using AMPs against infection caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2).

Photostability studies of GarKS peptides for topical formulation development

There is a growing interest in the use of antimicrobial peptides (AMPs) as potent alternatives for conventional antibiotics, especially in chronic infected wounds. The development of a suitable topical formulation requires a thorough assessment of the photostability profiles of AMPs. In this study, we sought to investigate the photostability of novel Garvicin KS (GarKS; composed of three peptides GakA, GakB, and GakC) peptides either as an individual peptide or in combinations. The photostability of the aqueous peptide solution was determined using Suntest (indoor and outdoor conditions). Furthermore, the antimicrobial efficacy of the peptides was evaluated following UVA irradiations. Photodegradation of the peptides under indoor and outdoor conditions followed first-order kinetics. Individual peptides (GakA, GakB, and GakC) were more prone to photodegradation as compared to combination peptides (GakA+GakB, GakB+GakC, and GakA+GakC) both under indoor and outdoor conditions where the GakA+GakB combination was the most photostable. A combination of GakA+GakB+GakC enhanced photostability under indoor conditions but was reduced under outdoor conditions. A combination of three peptides with an antioxidant (glutathione) or superoxide/hydrogen peroxide scavenger (trehalose) enhanced the photostability of peptides with the highest stability achieved at a peptide:photostabilizer molar ratio of 1:0.8 for glutathione. A nominal increase in the MIC value for the peptide combinations as opposed to a larger increase for individual peptides further supports the photostability effects of combination peptides following UVA irradiations. These results suggest that the GakA+GakB or GakA+GakB+GakC combinations exhibited the highest photostability with excellent antimicrobial efficacy deemed suitable for the development of a potent AMP formulation for topical applications.

In Silico Discovery of Antimicrobial Peptides as an Alternative to Control SARS-CoV-2.

A serious pandemic has been caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The interaction between spike surface viral protein (Sgp) and the angiotensin-converting enzyme 2 (ACE2) cellular receptor is essential to understand the SARS-CoV-2 infectivity and pathogenicity. Currently, no drugs are available to treat the infection caused by this coronavirus and the use of antimicrobial peptides (AMPs) may be a promising alternative therapeutic strategy to control SARS-CoV-2. In this study, we investigated the in silico interaction of AMPs with viral structural proteins and host cell receptors. We screened the antimicrobial peptide database (APD3) and selected 15 peptides based on their physicochemical and antiviral properties. The interactions of AMPs with Sgp and ACE2 were performed by docking analysis. The results revealed that two amphibian AMPs, caerin 1.6 and caerin 1.10, had the highest affinity for Sgp proteins while interaction with the ACE2 receptor was reduced. The effective AMPs interacted particularly with Arg995 located in the S2 subunits of Sgp, which is key subunit that plays an essential role in viral fusion and entry into the host cell through ACE2. Given these computational findings, new potentially effective AMPs with antiviral properties for SARS-CoV-2 were identified, but they need experimental validation for their therapeutic effectiveness.

A Review on the Use of Antimicrobial Peptides to Combat Porcine Viruses.

Viral infectious diseases pose a serious threat to animal husbandry, especially in the pig industry. With the rapid, continuous variation of viruses, a series of therapeutic measures, including vaccines, have quickly lost their efficacy, leading to great losses for animal husbandry. Therefore, it is urgent to find new drugs with more stable and effective antiviral activity. Recently, it has been reported that antimicrobial peptides (AMPs) have great potential for development and application in animal husbandry because of their significant antibacterial and antiviral activity, and the antiviral ability of AMPs has become a research hotspot. This article aims to review the research situation of AMPs used to combat viruses in swine production of animal husbandry, clarify the mechanism of action of AMPs on viruses and raise some questions, and explore the future potential of AMPs in animal husbandry.

A Novel Dual-Targeted α-Helical Peptide With Potent Antifungal Activity Against Fluconazole-Resistant Candida albicans Clinical Isolates.

Due to compromised immune system, fungal infection incidences have markedly increased in the last few decades. Pathogenic fungi have developed resistance to the clinically available antifungal agents. Antifungal resistance poses a great challenge to clinical treatment and has stimulated the demand for novel antifungal agents. A promising alternative to the treatment of fungal diseases is the use of antimicrobial peptides (AMPs). However, the antifungal activities of AMPs have not been fully determined. Therefore, this study aimed at designing and screening α-helical peptides with potential antifungal activities. The effects of key physicochemical parameters on antifungal activities were also investigated. A series of lengthened and residue-substituted derivatives of the template peptide KV, a hexapeptide truncated from the α-helical region of porcine myeloid antimicrobial peptide-36, were designed and synthesized. Enhancement of hydrophobicity by introducing aromatic hydrophobic amino acids (tryptophan and phenylalanine) significantly increased the efficacies of the peptides against Candida albicans strains, including fluconazole-resistant isolates. Increased hydrophobicity also elevated the toxic properties of these peptides. RF3 with moderate hydrophobicity exhibited potent anticandidal activities (GM = 6.96 μM) and modest hemolytic activities (HC10 > 64 μM). Additionally, repeated exposure to a subinhibitory concentration of RF3 did not induce resistance development. The antifungal mechanisms of RF3 were due to membrane disruptions and induction of reactive oxygen species production. Such a dual-targeted mechanism was active against drug-resistant fungi. These results show the important role of hydrophobicity and provide new insights into designing and developing antifungal peptides. Meanwhile, the successful design of RF3 highlights the potential utility of AMPs in preventing the spread of drug-resistant fungal infections.

All d-Lysine Analogues of the Antimicrobial Peptide HPA3NT3-A2 Increased Serum Stability and without Drug Resistance

Novel antibiotic drugs are urgently needed because of the increase in drug-resistant bacteria. The use of antimicrobial peptides has been suggested to replace antibiotics as they have strong antimicrobial activity and can be extracted from living organisms such as insects, marine organisms, and mammals. HPA3NT3-A2 ([Ala1,8] HPA3NT3) is an antimicrobial peptide that is an analogue of the HP (2–20) peptide derived from Helicobacter pylori ribosomal protein L1. Although this peptide was shown to have strong antimicrobial activity against drug-resistant bacteria, it also showed lower toxicity against sheep red blood cells (RBCs) and HaCaT cells compared to HPA3NT3. The l-Lys residues of HPA3NT3-A2 was substituted with d-Lys residues (HPA3NT3-A2D; [d-Lys2,5,6,9,10,15] HPA3NT3-A2) to prevent the cleavage of peptide bonds by proteolytic enzymes under physiological conditions. This peptide showed an increased half-life and maintained its antimicrobial activity in the serum against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) (pathogen). Furthermore, the antimicrobial activity of HPA3NT3-A2D was not significantly affected in the presence of mono- or divalent ions (Na+, Mg2+, Ca2+). Finally, l- or d-HPA3NT3-A2 peptides exhibited the strongest antimicrobial activity against antibiotic-resistant bacteria and failed to induce resistance in Staphylococcus aureus after 12 passages.

Effect of Dermaseptin S4 on C. albicans Growth and EAP1 and HWP1 Gene Expression.

Increasing resistance and changes in the spectrum of Candida infections have generated considerable interest in the development of new antifungal molecules. The use of antimicrobial peptides (AMPs) appears to be a promising approach. Frog skin AMPs (such as dermaseptins) have shown antimicrobial activity against several pathogens. In this study, we aimed to test the antimicrobial efficacy of dermaseptin S4 (DS4) against C. albicans. We determined the minimal inhibitory concentration (MIC) of DS4, and investigated the effects of the DS4 at low concentrations on human primary gingival fibroblasts. Additionally, we evaluated the effect of DS4 on C. albicans growth, form changes, and biofilm formation, as well as the expression of certain virulent genes. Our data show that DS4 completely inhibits C. albicans growth at a concentration of 32μg/mL referring to the MIC of DS4. It should be noted that even with low concentrations (below 16μg/mL), DS4 still have significant growth reduction of C. albicans, but were not toxic to human gingival fibroblasts. DS4 inhibited the transition from yeast to hyphae, and decreased the biofilm formation by reducing the biofilm mass weight. Surface morphological changes in the yeast cell membrane were observed following exposure to DS4. The gene expression analyses revealed that DS4 significantly decreased the expression of EAP1 and HWP1 genes. Overall results suggest the potential use of DS4 as an antifungal therapy to prevent C. albicans pathogenesis.

Antimicrobial activity and acting mechanism of Tegillarca granosa hemoglobin-derived peptide (TGH1) against Vibrio parahaemolyticus

Vibrio parahaemolyticus is a Gram-negative bacterium and the one of leading causal agent of human foodborne diseases such as gastroenteritis upon consumption of raw, or contaminated marine products. There is an increased interest in the use of antimicrobial peptides (AMPs) as alternative food preservatives to prevent foodborne diseases. In this study, bioinformatics tools were used to predict and screen AMPs derived from hemoglobin of blood clam (Tegillarca granosa). A novel AMP, T. granosa hemoglobin-derived peptide (TGH1), was identified and its antimicrobial effect and mechanism of action on V. parahaemolyticus was explored. The minimal inhibitory concentration (MIC) of TGH1 on V. parahaemolyticus was 12.5 μg/mL. Transmission electron microscopy (TEM) revealed that TGH1 kills bacteria by perforating the cell wall perforation and destroying integrity of the cell membrane. Similarly, laser confocal microscopy confirmed that TGH1 entered bacterial cells by aggregating on the cell surface to destroy the cell. In addition, TGH1 increased the inner-membrane permeability of V. parahaemolyticus in a concentration-dependent manner, as well as prevented biofilm formation. Moreover, TGH1 has 55.6% β-sheet (antiparallel) structure and has no cytotoxic effects on normal human hepatocytes. Thus, peptide TGH1 has good potential use and application in antimicrobial control of foodborne pathogens.

Role of lipopolysaccharides and lipoteichoic acids on C-Chrysophsin-1 interactions with model Gram-positive and Gram-negative bacterial membranes.

Antimicrobial peptides (AMPs) are attractive as biomaterial coatings because they have broad spectrum activity against different microbes, with a low likelihood of incurring antimicrobial resistance. Direct action against the bacterial membrane is the most common mechanism of action (MOA) of AMPs, with specific MOAs dependent on membrane composition, peptide concentration, and environmental factors that include temperature. Chrysophsin-1 (CHY1) is a broad spectrum salt-tolerant AMP that is derived from a marine fish. A cysteine modification was made to the peptide to facilitate attachment to a surface, such as a biomedical device. The authors used quartz crystal microbalance with dissipation monitoring to study how temperature (23 and 37 °C) and lipid composition influence the MOA of cysteine-modified peptide (C-CHY1) with model membranes comprised of supported lipid bilayers (SLBs). These two temperatures were used so that the authors could better understand the differences in behavior between typical lab temperatures and physiologic conditions. The authors created model membranes that mimicked properties of Gram-negative and Gram-positive bacteria in order to understand how the mechanisms might differ for different types of bacterial systems. SLB models of Gram-positive bacterial membranes were formed using combinations of phosphatidylcholine, phosphatidylglycerol (PG), and S. aureus-derived lipoteichoic acid (LTA). SLB models of Gram-negative bacterial membranes were formed using combinations of phosphatidylethanolamine (PE), PG, and E. coli-derived lipopolysaccharides (LPS). The molecules that distinguish Gram-positive and Gram-negative membranes (LTA and LPS) have the potential to alter the MOA of C-CHY1 with the SLBs. The authors' results showed that the MOA for the Gram-positive SLBs was not sensitive to temperature, but the LTA addition did have an effect. Specifically, similar trends in frequency and dissipation changes across all overtones were observed, and the same mechanistic trends were observed in the polar plots at 23 and 37 °C. However, when LTA was added, polar plots showed an association between C-CHY1 and LTA, leading to SLB saturation. This was demonstrated by significant changes in dissipation, while the frequency (mass) was not increasing after the saturation point. For the Gram-negative SLBs, the composition did not have a significant effect on MOA, but the authors saw more differences between the two temperatures studied. The authors believe this is due to the fact that the gel-liquid crystal transition temperature of PE is 25 °C, which means that the bilayer is more rigid at 23 °C, compared to temperatures above the transition point. At 23 °C, a significant energetic shift would be required to allow for additional AMP insertion. This could be seen in the polar plots, where there was a steep slope but there was very little mass addition. At 37 °C, the membrane is more fluid and there is less of an energetic requirement for insertion. Therefore, the authors observed greater mass addition and fewer changes in dissipation. A better understanding of C-CHY1 MOA using different SLB models will allow for the more rational design of future therapeutic solutions that make use of antimicrobial peptides, including those involving biomaterial coatings.

Unravelling the Mechanism of Action of Pepr, a Viral-Derived Membrane-Active Peptide, Against Staphylococcus Aureus Biofilms

Bacterial infections are a major human health threat given both the increasing incidence of drug-resistant bacteria and the ability of bacteria to form biofilms. Biofilm-related infections are particularly difficult to treat due to their reduced susceptibility to conventional antibiotics. Given the increasing interest in the use of antimicrobial peptides (AMPs) as alternatives against bacterial biofilms, our work is focused on the key factors that govern the antibiofilm action of a model AMP at the molecular level.