Strain Mapping Research Articles

Myocardial Strain Imaging: Theory, Current Practice, and the Future.

Myocardial strain imaging by echocardiography or cardiac magnetic resonance (CMR) is a powerful method to diagnose cardiac disease. Strain imaging provides measures of myocardial shortening, thickening, and lengthening and can be applied to any cardiac chamber. Left ventricular (LV) global longitudinal strain by speckle-tracking echocardiography is the most widely used clinical strain parameter. Several CMR-based modalities are available and are ready to be implemented clinically. Clinical applications of strain include global longitudinal strain as a more sensitive method than ejection fraction for diagnosing mild systolic dysfunction. This applies to patients suspected of having heart failure with normal LV ejection fraction, to early systolic dysfunction in valvular disease, and when monitoring myocardial function during cancer chemotherapy. Segmental LV strain maps provide diagnostic clues in specific cardiomyopathies, when evaluating LV dyssynchrony and ischemic dysfunction. Strain imaging is a promising modality to quantify right ventricular function. Left atrial strain may be used to evaluate LV diastolic function and filling pressure.

Demonstration of an integrated-heating load frame for quantitatively assessing microscale tensile properties of copper and Zircaloy-2

Small-scale mechanical testing (SSMT) is of great interest in the nuclear materials community as it permits the use of surrogate irradiation techniques, such as ion beam irradiation when investigating the impact of irradiation damage on mechanical properties. The design of a micro-electro-mechanical-system (MEMS) micro-tensile stage is demonstrated to enable micron-sized specimen testing up to failure under ambient and reactor-relevant temperatures. Copper and Zircaloy-2 microscale specimens, having gauge lengths of 200 μm, gauge widths of 48 μm, and specimen-dependent constant gauge thicknesses of 10 μm to 26 μm, are fabricated using micro-wire electrical discharge machining and focused ion beam milling. From each gauge section, microstructure data is captured prior to testing using electron backscatter diffraction analysis, and an optimized digital image correlation speckle pattern is deposited on the specimen surface. The speckle pattern is tracked during deformation and post-processed to obtain strain-field evolution maps throughout deformation. Strain maps provide a means to account for and explain microstructure-dependent features observed in the captured stress-strain curves. The combination of using micro-wire electrical discharge machining, focused ion beam cleaning, and ion beam induced platinum deposition for micron-sized specimen preparation as well as utilizing microfabrication techniques to fabricate an integrated heating microtensile load frame reported herein serve as a demonstration of SSMT approaches that can be adopted to tackle challenging problems in nuclear materials research, including but not limited to the effects of ion beam irradiation on mechanical performance and providing experimental data to support small-scale modeling efforts of embrittling precipitates or radiation-induced segregation.

Optical coherence tomography quantifies gradient refractive index and mechanical stiffness gradient across the human lens

BackgroundAs a key element of ocular accommodation, the inherent mechanical stiffness gradient and the gradient refractive index (GRIN) of the crystalline lens determine its deformability and optical functionality. Quantifying the GRIN profile and deformation characteristics in the lens has the potential to improve the diagnosis and follow-up of lenticular disorders and guide refractive interventions in the future.MethodsHere, we present a type of optical coherence elastography able to examine the mechanical characteristics of the human crystalline lens and the GRIN distribution in vivo. The concept is demonstrated in a case series of 12 persons through lens displacement and strain measurements in an age-mixed group of human subjects in response to an external (ambient pressure modulation) and an intrinsic (micro-fluctuations of accommodation) mechanical deformation stimulus.ResultsHere we show an excellent agreement between the high-resolution strain map retrieved during steady-state micro-fluctuations and earlier reports on lens stiffness in the cortex and nucleus suggesting a 2.0 to 2.3 times stiffer cortex than the nucleus in young lenses and a 1.0 to 7.0 times stiffer nucleus than the cortex in the old lenses.ConclusionsOptical coherence tomography is suitable to quantify the internal stiffness and refractive index distribution of the crystalline lens in vivo and thus might contribute to reveal its inner working mechanism. Our methodology provides new routes for ophthalmic pre-surgical examinations and basic research.

A New Technology for Industrial Strain Mapping Using Single-Wall Carbon Nanotube Sensors

Measurements of mechanical strain are widely used in heavy industry to design and test new structures and to ensure the safety of installed infrastructure. However, the few practical methods for strain measurement all have serious limitations. To complement these methods, we have developed a new strain technology, called S4 for “strain-sensing smart skin,” which uses single-wall carbon nanotubes (SWCNTs) as microscopic sensors. Nanotubes dilutely embedded in a polymer are applied as a thin film to specimen surfaces of interest. Subsequent strains in the specimen are transmitted by load transfer through the film to the nanotubes, inducing axial compression or extension. Those small structural deformations of the SWCNTs alter the semiconducting band gaps in predictable ways, causing proportional shifts in the peak wavelengths of their near-infrared fluorescence emission. Shifts are quantified by optically exciting the specimen surface and spectrally analyzing the resulting fluorescence to deduce strain values at the probed locations. The S4 method has recently been implemented using hyperspectral imaging. We demonstrate measurements in less than one minute of strain maps containing hundreds of thousands of pixels with 50 microstrain noise levels and 0.2 mm spatial resolution. This technology has promising potential to become a large-scale commercialized application of carbon nanotechnology.

Strain Measurement during Quasi-Static and Cyclic Loads in AL-6XN Material Using Digital Image Correlation Technique.

A customized digital image correlation (DIC) system was implemented to monitor the strain produced in a cold-rolled AL-6XN stainless steel plate, 3.0 mm thick, subjected to quasi-static and cyclic loading tests. A comparison of the DIC strain measurements was made against those provided by conventional extensometers. Furthermore, the DIC system was used to monitor the fatigue crack initiation in low-cycle fatigue tests. The true stress-strain behavior for the AL-6XN material was properly captured by the DIC measurements. For low-cycle fatigue tests (strain control), the strain mapping generated by DIC allowed for identifying zones with higher strain than the nominal strain amplitude applied (εa) since the first stages of the fatigue life (FL). These zones become potential fatigue crack initiation sites.

Atomic Structure and Chemistry of High-Entropy Oxide Grain Boundaries revealed by STEM Imaging, Strain Mapping, and Spectroscopy

Atomic Structure and Chemistry of High-Entropy Oxide Grain Boundaries revealed by STEM Imaging, Strain Mapping, and Spectroscopy

Spatial Mapping of Bulk Elastic Strain in De-alloyed Nanoporous Gold using Four-dimensional Scanning Transmission Electron Microscopy

Spatial Mapping of Bulk Elastic Strain in De-alloyed Nanoporous Gold using Four-dimensional Scanning Transmission Electron Microscopy

Strain mapping in amorphous germanium thin films with scanning reflectance anisotropy microscopy

Strain imaging is a critical aspect in the design and characterization of opto-electronics, microelectronics, flexible electronics, and on-chip photonics. However, strain mapping techniques are often material specific and strain measurements in amorphous materials remain a challenge. Here, we demonstrate strain mapping and optical characterization of an amorphous semiconductor using scanning reflectance anisotropy microscopy. Using reflection anisotropy spectroscopy and finite element simulations on evaporated amorphous germanium films, we showcase the strain sensitivity of the ellipsometric parameters. We demonstrate nondestructive mapping for simple and complex strain states in amorphous systems. The sub-degree phase and amplitude sensitivity of the microscope is able to determine strain states on the order of 10−3.

Influence of temperature on the compression properties of expanded thermoplastic polyurethane (ETPU)

This study explores how expanded thermoplastic polyurethane (ETPU) responds to temperature and compression at various temperatures. Dynamic mechanical thermal analysis (DMTA) was used to understand the temperature influence at small deformations. To investigate the deformation behavior at different compression stages we employed in-situ CT measurements and 3D strain mapping. Through quasi-static compression tests at temperatures from − 50 to 120 °C, we determined the influence of temperature on compression modulus, elastic stress, stress at 50% deformation, densification, and energy absorption. Remarkably, ETPU demonstrates robust recovery after compression, particularly within the − 50 to 60 °C temperature range. Subsequent compression tests show consistent or even slightly increased compression properties, such as a 10% increase in energy absorption for samples previously tested at − 40 °C, indicating that ETPU can withstand prior exposure to different temperatures.

Sheep Bone Ultrastructure Analyses Reveal Differences in Bone Maturation around Mg-Based and Ti Implants.

Magnesium alloys are some of the most convenient biodegradable materials for bone fracture treatment due to their tailorable degradation rate, biocompatibility, and mechanical properties resembling those of bone. Despite the fact that magnesium-based implants and ZX00 (Mg-0.45Zn-0.45Ca in wt.%), in particular, have been shown to have suitable degradation rates and good osseointegration, knowledge gaps remain in our understanding of the impact of their degradation properties on the bone's ultrastructure. Bone is a hierarchically structured material, where not only the microstructure but also the ultrastructure are important as properties like the local mechanical response are determined by it. This study presents the first comparative analysis of bone ultrastructure parameters with high spatial resolution around ZX00 and Ti implants after 6, 12, and 24 weeks of healing. The mineralization was investigated, revealing a significant decrease in the lattice spacing of the (002) Bragg's peak closer to the ZX00 implant in comparison to Ti, while no significant difference in the crystallite size was observed. The hydroxyapatite platelet thickness and osteon density demonstrated a decrease closer to the ZX00 implant interface. Correlative indentation and strain maps obtained by scanning X-ray diffraction measurements revealed a higher stiffness and faster mechanical adaptation of the bone surrounding Ti implants as compared to the ZX00 ones. Thus, the results suggest the incorporation of Mg2+ ions into the bone ultrastructure, as well as a lower degree of remodeling and stiffness of the bone in the presence of ZX00 implants than Ti.

Elastic strain mapping of plastically deformed materials by TEM

A method for mapping elastic strains by TEM in plastically deformed materials is presented. A characteristic feature of plastically deformed materials, which cannot be handled by standard strain measurement method, is the presence of orientation gradients. To circumvent this issue, we couple orientation and strain maps obtained from scanning precession electron diffraction datasets. More specifically, orientation gradients are taken into account by 1) identifying the diffraction spot positions in a reference pattern, 2) measuring the disorientation between the diffraction patterns in the map and the reference pattern, 3) rotating the coordinate system following the measured disorientation at each position in the map, 4) calculating strains in the rotated coordinate system. At present, only azimuthal rotations of the crystal are handled. The method is illustrated on a Cr2AlC monocrystal micropilar deformed in near simple flexion during a nanomechanical test. After plastic deformation, the sample contains dislocations arranged in pile-ups and walls. The strain-field around each dislocation is consistent with theory, and a clear difference is observed between the strain fields around pile-ups and walls. It is further remarked that strain maps allow for the orientation of the Burgers vector to be identified. Since the loading undergone by the sample is known, this also allows for the position of the dislocation sources to be estimated. Perspectives for the study of deformed materials are finally discussed.

A cross sectional pilot study utilising STrain Analysis and Mapping of the Plantar Surface (STAMPS) to measure plantar load characteristics within a healthy population

BackgroundNo in-shoe systems, measuring both components of plantar load (plantar pressure and shear stress) are available for use in patients with diabetes. The STAMPS (STrain Analysis and Mapping of the Plantar Surface) system utilises digital image correlation (DIC) to determine the strain sustained by a deformable insole, providing a more complete understanding of plantar shear load at the foot-surface interface. Research questionsWhat is the normal range and pattern of strain at the foot-surface interface within a healthy population as measured by the STAMPS system? Is STAMPS a valid tool to measure the effects of plantar load? MethodsA cross-sectional study of healthy participants was undertaken. Healthy adults without foot pathology or diabetes were included. Participants walked 20 steps with the STAMPS insole in a standardised shoe. Participants also walked 10 m with the Novel Pedar® plantar pressure measurement insole within the standardised shoe. Both measurements were repeated three times. Outcomes of interest were global and regional values for peak resultant strain (SMAG) and peak plantar pressure (PPP). ResultsIn 18 participants, median peak SMAG and PPP were 35.01 % and 410.6kPa respectively. The regions of the hallux and heel sustained the highest SMAG (29.31 % (IQR 24.56–31.39) and 20.50 % (IQR 15.59–24.12) respectively) and PPP (344.8kPa (IQR 268.3 – 452.5) and 279.3kPa (IQR 231.3–302.1) respectively). SMAG was moderately correlated with PPP (r= 0.65, p < 0.001). Peak SMAG was located at the hallux in 55.6 % of participants, at the 1st metatarsal head (MTH) in 16.7 %, the heel in 16.7 %, toes 3–5 in 11.1 % and the MTH2 in 5.6 %. SignificanceThe results demonstrate the STAMPS system is a valid tool to measure plantar strain. Further studies are required to investigate the effects of elevated strain and the relationship with diabetic foot ulcer formation.

Correlating microstructure and mechanical properties of harvested high dose Zorita light water reactor internals

In this study, microstructural studies and micro-mechanical testing of an ex-plant material harvested from the decommissioned pressurized water reactor (PWR) is carried out. Irradiated 304 stainless steel (SS) components were harvested by the Electric Power Research Institute, U.S. Nuclear Regulatory Commission, and members of the José Cabrera Nuclear Power Station (Zorita) in Spain. The bi-crystalline micro-tensile specimens, atom probe tomography (APT) tips, and transmission electron microscopy (TEM) lamellae were fabricated from the baffle plate materials irradiated to 0.05, 15 and 50 dpa to elucidate microstructural, microchemical, and local mechanical properties changes as a function of dose. TEM and APT studies reveal radiation induced Ni, Cr, and Si rich precipitates in the 15 dpa sample that become smaller and partially redissolve into the matrix of the 50 dpa sample (decreasing size and number density). Dislocation loop and cavity number density and size were quantified as a function of dose as well as swelling. Intergranular Ni and Si enrichments with concomitant Fe and Cr depletion were observed in the 15 dpa sample and were more pronounced in the 50 dpa sample. Micro-tensile testing performed in the scanning electron microscope (SEM) at room temperature and 300 °C shows that the material's local yield strength and ultimate tensile strength decreases with increased dose and elevated test temperature and provides further insights via localized strain mapping. Current and previous mechanical data was compared with calculated values using the dispersed barrier hardening model with inputs of dislocation loops, precipitates, and cavities from microstructural characterization.

Strain Heterogeneity and Extended Defects in Halide Perovskite Devices.

Strain is an important property in halide perovskite semiconductors used for optoelectronic applications because of its ability to influence device efficiency and stability. However, descriptions of strain in these materials are generally limited to bulk averages of bare films, which miss important property-determining heterogeneities that occur on the nanoscale and at interfaces in multilayer device stacks. Here, we present three-dimensional nanoscale strain mapping using Bragg coherent diffraction imaging of individual grains in Cs0.1FA0.9Pb(I0.95Br0.05)3 and Cs0.15FA0.85SnI3 (FA = formamidinium) halide perovskite absorbers buried in full solar cell devices. We discover large local strains and striking intragrain and grain-to-grain strain heterogeneity, identifying distinct islands of tensile and compressive strain inside grains. Additionally, we directly image dislocations with surprising regularity in Cs0.15FA0.85SnI3 grains and find evidence for dislocation-induced antiphase boundary formation. Our results shine a rare light on the nanoscale strains in these materials in their technologically relevant device setting.

Application of Digital Image Correlation for Strain Mapping of Structural Elements and Materials.

The strain gauge method and the digital image correlation (DIC) method are commonly employed for measuring strain in tested objects, including material specimens and structural elements. The optical method enables the assessment of 3D strain fields across the entire area of interest, achieved through cameras and advanced software. The study investigates both quasi-static strength tests and more advanced research of structures. It explores full-scale construction testing, featuring highly stressed components of new wagon designs. The paper reviews the benefits and challenges of using the DIC method to measure large-scale elements. Conducting full-scale object testing is characterized by significant complexity, often involving interactions between elements, complex loading conditions, and the influence of friction. Numerous factors affect the measurements. Therefore, to compare both methods, an initially standard shear by tensile test of CFRP composite was analyzed. The analysis of strain maps provides valuable visualization of deformation patterns occurring during construction loading. The strain gauge method was crucial for verifying the quality of the DIC measurements. The results obtained provide a detailed understanding of how the components behave, highlighting the versatility of digital image correlation technology. For strain values of 0.3% and above, a good match was obtained between optical and strain gauge measurements. Below this value, the results have less accuracy. The results obtained provide a detailed understanding of how the components behave, highlighting the versatility of digital image correlation technology. The error comparison and discussion between different measurement scenarios were conducted. The paper presents a developed methodology for measuring strain and displacement state in complex and crucial structural elements. The method can be applied to measurements of heavily loaded components used in the transportation industry; for example, in railways.

In vivo human knee varus-valgus loading apparatus for analysis of MRI-based intratissue strain and relaxometry

The diagnosis of early-stage osteoarthritis remains as an unmet challenge in medicine and a roadblock to evaluating the efficacy of disease-modifying treatments. Recent studies demonstrate that unique patterns of intratissue cartilage deformation under cyclic loading can serve as potential biomarkers to detect early disease pathogenesis. However, a workflow to obtain deformation, strain maps, and quantitative MRI metrics due to the loading of articular cartilage in vivo has not been fully developed. In this study, we characterize and demonstrate an apparatus that is capable of applying a varus-valgus load to the human knee in vivo within an MRI environment to enable the measurement of cartilage structure and mechanical function. The apparatus was first tested in a lab environment, then the functionality and utility of the apparatus were examined during varus loading in a clinical 3T MRI system for human imaging. We found that the device enables quantitative MRI metrics for biomechanics and relaxometry data acquisition during joint loading leading to compression of the medial knee compartment. Integration with spiral DENSE MRI during cyclic loading provided time-dependent displacement and strain maps within the tibiofemoral cartilage. The results from these procedures demonstrate that the performance of this loading apparatus meets the design criteria and enables a simple and practical workflow for future studies of clinical cohorts, and the identification and validation of imaging-based biomechanical biomarkers.

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

Abstract Purpose: Establish a technique for simultaneous interrupted volumetric imaging of internal structure and time-resolved full-field surface strain measurements during in-situ X-ray micro-computed tomography (XCT) experiments. This enables in-situ testing of stiff materials with large forces relative to the compliance of the in-situ load frame, which might exhibit localization (e.g., necking, compaction banding) and other inhomogeneous behaviors.Methods: The system utilizes a combination of in-situ XCT, 2D X-ray imaging, and particle tracking to conduct volumetric imaging of the internal structure of a specimen with interrupted loading and surface strain mapping during loading. Critically, prior to the laboratory-scale XCT experiments, specimens are speckled with a high-X-ray-contrast powder that is bonded the surface. During in-situ loading, the XCT system is programmed to capture sequential 2D X-ray images orthogonal to the speckled specimen surface. A single particle tracking (SPT) or digital image correlation (DIC) algorithm is used to measure full-field surface strain evolution throughout the time-sequence of images. At specified crosshead displacements, the motion and 2D image sequence is paused for volumetric XCT image collection. Results: We show example results on a micro-tensile demonstration specimen additive manufactured from Inconel 718 nickel-chrome alloy. Results include XCT volume reconstructions, crosshead-based engineering stress, and full-field strain maps. Conclusion: We demonstrate an in-situ technique to obtain surface strain evolution during laboratory-scale XCT testing and interrupted volumetric imaging. This allows closer investigation of, for example, the effect of micro-pores on the strain localization behavior of additive manufactured metal alloys. In addition to describing the method using a representative test piece, the dataset and code are published as open-source resources for the community. Graphical abstract

Mapping the defect acceptance for dynamically loaded components by exploiting DIC-based full-field receptances

Potential defect acceptance can be seen dependable upon the mapping of effective strains on the whole surface, due to dynamic loading of the components as they are mounted. With proper constitutive models and loading spectra, the experiment-based mapping of the equivalent stresses can be achieved from optical full-field receptances in an extremely dense grid, also for lightweight parts, without inertia distortions thanks to contactless measurements. Fatigue spectral methods turn this mapping into components’ life distributions, for a clear assessment of the material’s utilisation: a risk grading mapping for potential defects can be formulated in the area of inquiry in order to discriminate between safe and dangerous locations. By following this experiment-based approach, potential defects in exercise and production might be tolerated in safer locations, under the chosen dynamic task, with great savings in costs and maintenance. Among the image-based full-field measurement techniques, Hi-Speed DIC has proved to work in many environments, to be able to estimate full-field receptances of real components in their effective assembling and loading conditions, in different cases of industrial interest. The quality achieved by DIC in the receptance maps helps in numerically deriving the strain FRFs on the sensed surface. Extended scenarios – with newly modelled coloured noises for an advanced excitation definition from two shakers – and a vibrating rectangular plate, as real mounted component, are highlighted in details to prove the effectiveness of DIC-based risk index mapping under defect acceptance criteria.

Design of an enhanced spatial resolution indoor plantar strain and gait analysis setup for biomedical applications

In the recent years, measurement of plantar strain and gait analysis has gained huge attention and plays a pivotal role in monitoring posture related ailments or Diabetic Foot Ulcer (DFU). Fibre Bragg Grating Arrays (closely spaced FBGs), another category of optical sensors, are employed in this study to understand the strain and gait of human foot. These arrays offer critical advantages such as enhanced sensitivity, data acquisition, multiplexing abilities, and sensor location effect compensation. For experimentation, five arrays were distributed among different regions (Upper, Medial, and Heel) of foot and their strain patterns for six volunteers (three male and three female) were recorded for eighty seconds. The data was analysed in two ways, Combined (data of array sensors were averaged to target the whole area) and Individual (for independent analysis of each sensor in array). Incoherent transitions and strain patterns of FBGs within the same arrays observed in individual analysis, explains enhanced resolution capabilities of the arrays. Strain mapping of sensor behaviour also confirmed the identification of various forms of gait i.e., Heel Strike, Flat Foot, Heel Off, and Zero Contact. The average standard deviation values for the arrays was reported below 0.16.

Atomistic-level analysis of nanoindentation-induced plasticity in arc-melted NiFeCrCo alloys: The role of stacking faults

Concentrated solid solution alloys (CSAs) have attracted attention for their promising properties; however, current manufacturing methods face challenges in complexity, high costs, and limited scalability, raising concerns about industrial viability. The prevalent technique, arc melting, yields high-purity samples with complex shapes. In this study, we explore nanoindentation tests at room temperature where arc-melted samples exhibit larger grain sizes, diminishing the effects of grain boundaries on the results. Motivated by these findings, our investigation focuses on the atomistic-level exploration of plasticity mechanisms, specifically dislocation nucleation and propagation during nanoindentation tests. The intricate chemistry of NiFeCrCo CSA influences pile-ups and slip traces, aiming to elucidate plastic deformation by considering both pristine and pre-existing stacking fault tetrahedra. Our analysis scrutinizes dynamic deformation processes, defect nucleation, and evolution, complemented by stress–strain and dislocation densities–strain curves illustrating the hardening mechanism of defective materials. Additionally, we examine surface morphology and plastic deformation through atomic shear strain and displacement mappings. This integrated approach provides insights into the complex interplay between the material structure and mechanical behavior, paving the way for an enhanced understanding and potential advancements in CSA applications.