Stable Catalyst Research Articles

Electrocatalysis of Oxygen Evolution Reaction Promoted by CoNiMn Films Synthesized by Electrodeposition.

Recently, efforts have been made to address the environmental damage caused by fossil-fuel-based primary energy sources. Interest in efficient technologies for converting and storing energy using renewable sources, especially sunlight, has increased, with the aim of replicating the natural photosynthesis process. However, artificial photosynthesis faces challenges with unfavorable kinetics and thermodynamics, requiring the use of stable catalysts for the hydrogen evolution (HER) and oxygen evolution (OER) reactions to generate H2 and O2, respectively. OER is the most prohibitive of the half-reactions by the highly sluggish kinetics. Mixed oxides, particularly those based on first-row transition metals, have shown promising results as catalysts for the OER. This work reports the synthesis of CoNiMn oxide via electrodeposition on fluoride tin oxide followed by electrochemical activation. This approach seeks to explore the synergistic effect between the elements and to produce a catalyst with superior efficiency and stability for the electrocatalysis of the OER compared to the monometallic and bimetallic oxides. The CoNiMn film was structurally and electrochemically characterized. The electrodeposited CoNiMn hybrid films demonstrated low overpotentials compared with standard OER electrocatalysts, with CoNiMn films outperforming all single and bimetallic oxide films. The activated CoNiMn film required an overpotential of 100 mV at 10 mA cm-2 (430 mV at 25 mA cm-2) and Tafel slope of 58 mV dec-1. The film was active for 15 h at 100 mA cm-2 and showed no significant change in morphology and structure after the chronopotentiometry, indicating that it is a promising and cost-effective alternative to enhance the OER activity using abundant elements.

Efficient hydrodeoxygenation of lignin-derived phenolics to cyclohexanol with N-doped alumina- carbide‐based RuCo catalysts derived from MOF under mild conditions

In this work, a novel RuCo bimetallic supported on N-doped carbon support containing alumina was prepared by in-situ pyrolysis using MOF-303 as the support precursor (Ru3Co1@CN-Al2O3), and it was applied to the efficient hydrodeoxygenation (HDO) of guaiacol under mild conditions (0.01 MPa H2, 200 °C, 3h), the yield of cyclohexanol reaches an impressive 83.12 %. In the absence of external hydrogen (2 MPa N2, 220 °C, 2 h), complete conversion of guaiacol was achieved, along with a remarkable 97.81 % selectivity towards cyclohexanol. The HDO of guaiacol under different atmospheres was further studied, and the possible mechanism was proposed. Characterization results indicated that the supported metals (Ru and Co) not only interacted with the N in the MOF-303 to enhance catalyst stability but also that the synergistic effect between Ru and Co was key to promoting the high yield of cyclohexanol through catalytic transfer hydrodeoxygenation (CTHDO) in isopropanol. Additionally, Ru3Co1@CN-Al2O3 was also effective in achieving the HDO of macromolecular lignin. This study provides a feasible approach for the high value-added green transformation of lignin and its derivatives under mild conditions, highlighting the significant potential of MOFs for lignin valorization.

Synthesis of Pt-Rare Earth Metal Alloys and Their Applications.

The alloying of platinum (Pt) with rare earth (RE) metals has emerged as a highly promising strategy for enhancing both the activity and stability of catalysts. Consequently, the development of methods for the controlled synthesis of Pt-RE alloys has received growing attention. This review comprehensively explores diverse synthesis methodologies for Pt-RE alloys, including physical metallurgy method, chemical reduction method, electrodeposition method, and dealloying method. Additionally, this review summaries the applications of Pt-RE alloys in various fields. By providing a critical analysis of existing literature and highlighting key challenges and future directions, this review aims to offer valuable insights and serve as a springboard for further advancements in the controlled synthesis and diverse applications of Pt-RE alloys.

In Situ Growth of MoN on Nickel Foam for Highly Efficient Hydrogen Evolution in Alkaline Solution.

Highly efficient, stable, and low-cost hydrogen evolution catalysts are urgently required for water electrolysis. Herein, a method for in situ growth of medium-nitrogen nanosheet MoN catalysts with a large electrochemical surface area on nickel foam (NF) is proposed. The results show that the morphology of the as-prepared catalysts greatly depends on the nitrogen sources and nitridation temperature. The MoN/NF catalyst nitride at 700 °C using melamine as a nitrogen source exhibits a spindle-like morphology consisting of stacked nanosheets, which is conducive to exposing more active sites, thereby increasing the catalyst activity. The N atoms in MoN could adjust the chemical environment of the metal by changing the density of the d-band electron state, which further improves the HER performance. Benefiting from the regulation of Mo charge distribution and exposure to more active sites through N doping and morphological control, the MoN/NF catalyst exhibits superior HER performance with an overpotential of 70 mV at a current density of 10 mA·cm-2, a Tafel slope of 44.3 mV dec-1, and an Rct of 1.83 Ω, indicating high HER catalytic activity, fast kinetics, and excellent conductivity. Theoretical calculations reveal that among the (002), (202), and (200) planes of MoN, the (202) plane exhibits the lowest value of |ΔGH*| (0.47 eV), which is close to that of Pt(111) (0.14 eV). More importantly, MoN(202) also has the smallest work function of 3.58 eV, indicating an enhanced capability to offer electrons. This work develops a strategy to design high-performance and low-cost transition-metal nitride HER catalysts.

Dry Reforming of Methane (DRM) over Hydrotalcite-Based Ni-Ga/(Mg, Al)Ox Catalysts: Tailoring Ga Content for Improved Stability

Dry reforming of methane (DRM) is a promising way to convert methane and carbon dioxide into syngas, which can be further utilized to synthesize value-added chemicals. One of the main challenges for the DRM process is finding catalysts that are highly active and stable. This study explores the potential use of Ni-based catalysts modified by Ga. Different Ni-Ga/(Mg, Al)Ox catalysts, with various Ga/Ni molar ratios (0, 0.1, 0.3, 0.5, and 1), were synthesized by the co-precipitation method. The catalysts were tested for the DRM reaction to evaluate their activity and stability. The Ni/(Mg, Al)Ox and its Ga-modified Ni-Ga/(Mg, Al)Ox were characterized by N2 adsorption–desorption, Fourier Transform Infrared Spectroscopy (FTIR), H2-temperature-programmed reduction (TPR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Raman techniques. The test of catalytic activity, at 700 °C, 1 atm, GHSV of 42,000 mL/h/g, and a CH4: CO2 ratio of 1, revealed that Ga incorporation effectively enhanced the catalyst stability. Particularly, the Ni-Ga/(Mg, Al)Ox catalyst with Ga/Ni ratio of 0.3 exhibited the best catalytic performance, with CH4 and CO2 conversions of 66% and 74%, respectively, and an H2/CO ratio of 0.92. Furthermore, the CH4 and CO2 conversions increased from 34% and 46%, respectively, when testing at 600 °C, to 94% and 96% when the catalytic activity was operated at 850 °C. The best catalyst’s 20 h stream performance demonstrated its great stability. DFT analysis revealed an alteration in the electronic properties of nickel upon Ga incorporation, the d-band center of the Ga modified catalyst (Ga/Ni ratio of 0.3) shifted closer to the Fermi level, and a charge transfer from Ga to Ni atoms was observed. This research provides valuable insights into the development of Ga-modified catalysts and emphasizes their potential for efficient conversion of greenhouse gases into syngas.

Hydrodeoxygenation of Glycerol to Propene Over Molybdenum and Niobium Phosphate Catalysts

AbstractIn single‐step conversion of glycerol to propene, the intricate catalytic pathways with molybdenum and niobium catalysts remain elusive. While these catalysts can effectively accelerate the hydrogenolytic cleavage of the glycerol CO bonds, resulting in a high selectivity to propene, the routes have not been thoroughly studied. This study explores the reaction routes and the role hydrogen plays in determining the product distribution. The hydrodeoxygenation (HDO) of glycerol was investigated using various glycerol purities in both batch and continuous reaction modes. Remarkably, Mo(PO4)x and Nb(PO4)x demonstrated catalytic performance with raw glycerol, indicating that impurities had no detrimental effect on the catalyst's activity. In batch mode, a propene selectivity of 53% was achieved over Mo(PO4)x as the catalyst, highlighting the catalyst's stability under these conditions. In continuous operation, the highest product selectivity to propene (12%) was observed at low temperatures (573 K), while more C2 to C6 alkanes were formed at increased temperatures (623 and 673 K). Whereas a hydrogen atmosphere promotes formation of 2‐propenol, as primary precursor to propene, an inert atmosphere leads to increased formation of propanal and dissociation products. Our work has elucidated new routes to upcycle biorenewable glycerol to propene over Mo(PO4)x and Nb(PO4)x catalysts.

Thermal and Sono-Aqueous Reforming of Alcohols for Sustainable Hydrogen Production.

Hydrogen is a clean-burning fuel with water as its only by-product, yet its widespread adoption is hampered by logistical challenges. Liquid organic hydrogen carriers, such as alcohols from sustainable sources, can be converted to hydrogen through aqueous-phase reforming (APR), a promising technology that bypasses the energy-intensive vaporization of feedstocks. However, the hydrothermal conditions of APR pose significant challenges to catalyst stability, which is crucial for its industrial deployment. This review focuses on the stability of catalysts in APR, particularly in sustaining hydrogen production over extended durations or multiple reaction cycles. Additionally, we explore the potential of ultrasound-assisted APR, where sonolysis enables hydrogen production without external heating. Although the technological readiness of ultrasound-assisted or -induced APR currently trails behind thermal APR, the development of catalysts optimized for ultrasound use may unlock new possibilities in the efficient hydrogen production from alcohols.

Active Sites on the CuCo Catalyst in Higher Alcohol Synthesis from Syngas: A Review

Higher alcohol synthesis through the Fischer–Tropsch (F–T) process was considered a promising route for the efficient utilization of fossil resources could be achieved. The CuCo catalysts were proven to be efficient candidates and attracted much interest. Great efforts have been made to investigate the active sites and mechanisms of CuCo catalysts. However, the industrialized application of CuCo catalysts in this process was still hindered. The poor stability of this catalyst was one of the main reasons. This short review summarized the recent development of active sites on the CuCo catalysts for higher alcohol synthesis, including CuCo alloy particles, CuCo core–shell particles, and unsaturated particles. The complex active sites and their continual changes during the reaction led to the poor stability of the catalysts. The effect of active sites on catalytic performance was discussed. Furthermore, the key factors in fabricating stable CuCo catalysts were proposed. Finally, reasonable proposals were proposed for designing efficient and stable CuCo catalysts in higher alcohol synthesis.

Boosting HER performance by using plasma prepared N-doped CNTs to support Pt nanoparticles

Developing highly-efficient and stable Pt-based catalysts towards alkaline hydrogen evolution reaction (HER) offers a promising strategy for future renewable energy. In this work, radio-frequency (RF) cold plasma-prepared N-doped MWCNTs were adopted to support Pt nanoparticles (NPs) (Pt/NCNTs) via pretreating MWCNTs with RF nitrogen plasma and combining with traditional thermal reduction method. The as-synthesized Pt/NCNT featured an ultra-small size of Pt NPs (1.5 nm) and plentiful doped nitrogen, exhibiting ultra-low overpotential of 28 mV@10 mA cm−2 and ultra-high mass activity of 3.2 A mg Pt−1@100 mA in 1 M KOH solution, which are superior to those of commercial 20 wt% Pt/C catalyst. This is because RF plasma can realize fast, high-efficient and specific N-doping structure of MWCNTs. The lone electron pairs of N species (mainly pyri-N and pyrr-N) on MWCNTs surface transfer to the empty orbitals of Pt NPs, forming a strong coordination effect between Pt and nitrogen, thereby boosting the alkaline HER catalytic performance.

Catalyst Design and Engineering for CO2-to-Formic Acid Electrosynthesis for a Low-Carbon Economy.

Formic acid (FA) has emerged as a promising candidate for hydrogen energy storage due to its favorable properties such as low toxicity, low flammability, and high volumetric hydrogen storage capacity under ambient conditions. Recent analyses have suggested that FA produced by electrochemical carbon dioxide (CO2) reduction reaction (eCO2RR) using low-carbon electricity exhibits lower fugitive hydrogen (H2) emissions and global warming potential (GWP) during the H2 carrier production, storage and transportation processes compared to those of other alternatives like methanol, methylcyclohexane, and ammonia. eCO2RR to FA can enable industrially relevant current densities without the need for high pressures, high temperatures, or auxiliary hydrogen sources. However, the widespread implementation of eCO2RR to FA is hindered by the requirement for highly stable and selective catalysts. Herein, the aim is to explore and evaluate the potential of catalyst engineering in designing stable and selective nanostructured catalysts that can facilitate economically viable production of FA.

Ultrafast Room-Temperature Synthesis of Phosphate-Intercalated NiFe Layered Double Hydroxides for High-Performance Alkaline Seawater Oxidation.

Quick and easy synthetic methods and highly efficient catalytic performance are equally important to anodic oxygen evolution reaction (OER) electrocatalysts for alkaline seawater electrolysis. Herein, we report a facile one-step route to in situ growing PO43- intercalated NiFe layered double hydroxides (NiFe-LDH) on Ni foam (denoted as NiFe-P/NF) by a room-temperature immersion for several minutes. This ultrafast approach transforms the NF surface into a rough PO43- intercalated NiFe-LDH overlayer, which demonstrates outstanding OER performance in both alkaline simulated and natural seawaters owing to good hydrophilic interface and the electrostatic repulsion of PO43- against Cl- anions. Density functional theory calculations reveal that the intercalated PO43- can not only promote electron transfer but also prevent Cl- from entering the interlayer and simultaneously inhibit the migration of Cl- over the NiFe-LDH surface. In alkaline simulated and natural seawater electrolytes, NiFe-P/NF needs low overpotentials of 248 and 298 mV to achieve a current density of 100 mA cm-2, respectively. NiFe-P/NF can stably run over 42 h in an alkaline high-salty electrolyte (1 M KOH + 2.5 M NaCl) at 250 mA cm-2, more than 70 times that of NiFe/NF (0.6 h), emphasizing the critical role of the intercalated PO43- anions on the excellent durability. This study offers a new strategy to modify commercial NF to prepare efficient and stable OER catalysts for seawater electrolysis.

Reduction and structural modification of MoOx/γ-Al2O3 catalysts through acetic acid treatment for green diesel production from corn distiller’s oil

Enabling new environmentally-friendly resources for fuels and platform chemicals is crucial to fulfill our future energy demands while enhancing circularity. Corn distiller’s Oil (CDO) − as a coproduct of the ethanol industry, serves as a sustainable supply of carbon that may be converted into energy, fuels and specialty chemicals. A current challenge in using renewable oxygenated feedstocks is the high amount of coking and catalyst fouling that occurs. This study examined the hydrothermal deoxygenation of CDO into green diesel using molybdenum oxide (MoOx) catalysts in a continuous process without using any external hydrogen. The possibility of reduction and developing oxygen-deficient surfaces on molybdenum oxide (MoOx) catalysts through acetic acid treatment or adding ceria (CeO2) was investigated in order to enhance the acidity of catalysts as well as catalytic activity and stability required for the production of green diesel from CDO. Results showed that the acidity of these catalysts as measured by NH3 temperature programmed desorption (NH3-TPD) had a strong correlation between the degree of deoxygenation and catalyst stability. Acetic acid treatment of the 7.5 wt% MoO3/γ-Al2O3 catalyst reduced MoO3 to MoO3-x, increased the Mo5+ species from 8.7 % to 22 %, created Mo4+ species and increased the catalyst surface acidity in the range of low to moderate strength by approximately 17 %. The use of acetic acid-treated molybdenum oxide (Hac-7.5 wt% MoO3/γ-Al2O3) catalyst enabled nearly complete (99.9 %) deoxygenation of CDO and heavy hydrocarbons cracking to produce diesel-like fuels. A moderate increase in catalyst surface acidity by acetic acid treatment also increased the selectivity of diesel-like fuel through hydrocracking of long-chain hydrocarbons. This low-cost modification step of catalyst improvement is promising for industrial application. However, cracking of hydrocarbons generated amorphous coke (no graphitic coke was observed) on the catalyst surface, which required periodic removal by controlled calcination of the catalyst in presence of air for further use.

Tuning the crystallinity of Cu-based electrocatalysts: Synthesis, structure, and activity towards the CO2 reduction reaction

The rising levels of CO2 have spurred growing concerns for our environment, and curbing CO2 emissions may not be practically viable with the expanding human population. One attractive strategy is the electrochemical CO2 reduction (CO2RR) into value added chemicals but because of the chemical inertness of the CO2 molecule, the electrochemical reduction requires a suitable catalyst. Cu-based catalysts have been largely investigated for CO2RR, however, the difficulty achieving a high selectivity and faradaic efficiency towards specific products, especially hydrocarbons, is still a challenge, alongside the concern over cost, stability and scarcity of the metal catalyst. The present research focuses on tuning the crystallinity of Cu nanoparticles via a green, cost-friendly, and facile method, called the urea glass route. Remarkably, the incorporation of a selected nitrogen-carbon rich source (namely, 4,5 dicyanoimidazole) at low temperatures allow the formation of an oxidized derived amorphous Cu system, whilst a second thermal treatment enables the transformation to crystalline Cu0. We found that the combination of surface Cu0 and Cu1+ (observed via XPS studies) present in our amorphous and crystalline Cu nanoparticles leads to interesting differences in the final catalytic activity when tested under CO2 reaction conditions. The combination of extended X-ray absorption fine structure (EXAFS) experiments and molecular dynamics simulations provides compelling evidence for the amorphous and metallic nature of Cu nanoparticles.

Construction of Co-CN as a high-performance catalyst for photocatalytic tetracycline degradation and mechanism study

Constructing highly efficient and stable catalysts for tetracycline degradation is very important in avoiding harm to human and ecosystem health. Herein, we doped Co-MOF into carbon nitride (CN) and synthesized successfully a copolymer Co-CN with heterojunctions structure simple intramolecular doping. Various characterization results demonstrate that Co2+ cations are highly dispersed on the CN support. The Co-CN catalyst exhibited outstanding degradation efficiency and recycle stability for tetracycline (TC) degradation, demonstrates a degradation efficiency of 85.2% under benign conditions. Various characterization results revealed the pathway and mechanism of TC degradation. An intramolecular heterojunction structures in Co-CN copolymers promote charge separation and transport efficiency, which make a variety of active species to be generated in the reaction system. Free radical trapping experiment results show that four active species including h+, 1O2, ·O2− and ·OH synergistically catalyze to activate the substrate to achieve degradation of TC molecules.

Two-dimensional Boridene Nanosheets for Efficient Electrochemical Nitrogen Fixation under Ambient Conditions.

The carbon-free electrocatalytic nitrogen reduction reaction (NRR) is an alternative technology to the current Haber-Bosch method, that can be conducted under ambient conditions, and directly converting water and nitrogen (N₂) into ammonia (NH₃). However, the limited activity and selectivity of NH₃ electrosynthesis hinder the practical applications of NRR. In this study, we present a novel type of electrocatalyst called boridene nanosheets enriched with metal vacancies that are specifically designed for efficient electrocatalytic NRR under ambient conditions. Electrochemical testing in a 0.1 M phosphate-buffered saline (PBS) electrolyte demonstrates that boridene exhibits a high Faradaic efficiency of 66.7% for NH₃ production at -0.2 V vs. RHE, with a maximum NH₃ yield rate of 23.6 µg h-1 mg cat-1 at -0.4 V vs. RHE. Durability tests show that boridene maintains significant stability throughout multiple cycles of NRR. Mechanistic insights are obtained through in situ FTIR spectroscopy, revealing that boridene exhibits a preference for the distal pathway during the process of NRR. These findings highlight the potential of boridene as an efficient and stable catalyst for sustainable NH₃ synthesis.

Molten Salt-Assisted Synthesis of Ferric Oxide/M-N-C Nanosheet Electrocatalysts for Efficient Oxygen Reduction Reaction.

Efficient, stable, and low-cost oxygen reduction catalysts are the key to the large-scale application of metal-air batteries. Herein, high-dispersive Fe2O3 nanoparticles (NPs) with abundant oxygen vacancies uniformly are anchored on lignin-derived metal-nitrogen-carbon (M-N-C) hierarchical porous nanosheets as efficient oxygen reduction reaction (ORR) catalysts (Fe2O3/M-N-C, M═Cu, Mn, W, Mo) based on a general and economical KCl molten salt-assisted method. The combination of Fe with the highly electronegative O induces charge redistribution through the Fe-O-M structure, thereby reducing the adsorption energy of oxygen-containing substances. The coupling effect of Fe2O3 NPs with M-N-C expedites the catalytic activity toward ORR by promoting proton generation on Fe2O3 and transfer to M-N-C. Experimental and theoretical calculation further revealed the remarkable electronic structure evolution of the metal site during the ORR process, where the emission density and local magnetic moment of the metal atoms change continuously throughout their reaction. The unique layered porous structure and highly active M-N4 sites resulted in the excellent ORR activity of Fe2O3/Cu-N-C with the onset potential of 0.977V, which is superior to Pt/C. This study offers a feasible strategy for the preparation of non-noble metal catalysts and provides a new comprehension of the catalytic mechanism of M-N-C catalysts.

Efficient, chlorine-free, and durable alkaline seawater electrolysis enabled by MOF-derived nanocatalysts

The development of cost-effective, scalable, and non-precious based bifunctional catalysts that can efficiently catalyze the sluggish oxygen and hydrogen evolution reactions (OER and HER) in the highly corrosive seawater medium is challenging, yet vital to realize a practical seawater electrolyzer. In this work, we demonstrate a nickel-exchanged zeolitic imidazolate framework (Ni@ZIF67)-derived nickel-cobalt-cobalt oxide nanoparticles embedded amorphous carbon (Ni–Co–CoO@C) nanocomposite as an efficient, chloride-resistant, and stable bifunctional catalyst in alkaline seawater. The OER and HER activities are meticulously characterized by comparing nanocomposites prepared at different pyrolysis temperatures. Ni@ZIF67 pyrolyzed at 700 °C (NZ700) exhibits the lowest OER overpotential (281 mV @ 10 mA cm−2) whereas that pyrolyzed at 500 °C reveals the lowest HER overpotential (196 mV @ 50 mA cm−2) in alkaline seawater. The NZ700||NZ700 cell also exhibits the lowest overall splitting voltage in alkaline seawater (1.72 V @ 20 mA cm−2). Detailed post-electrolysis studies are also carried out to explore the origin of the electrocatalytic activities. Furthermore, a zero-gap, flow-cell type alkaline seawater electrolyzer prototype has been fabricated to demonstrate the viability of our catalysts.

Reaction-driven restructuring of defective PtSe2 into ultrastable catalyst for the oxygen reduction reaction.

PtM (M = S, Se, Te) dichalcogenides are promising two-dimensional materials for electronics, optoelectronics and gas sensors due to their high air stability, tunable bandgap and high carrier mobility. However, their potential as electrocatalysts for the oxygen reduction reaction (ORR) is often underestimated due to their semiconducting properties and limited surface area from van der Waals stacking. Here we show an approach for synthesizing a highly efficient and stable ORR catalyst by restructuring defective platinum diselenide (DEF-PtSe2) through electrochemical cycling in an O2-saturated electrolyte. After 42,000 cycles, DEF-PtSe2 exhibited 1.3 times higher specific activity and 2.6 times higher mass activity compared with a commercial Pt/C electrocatalyst. Even after 126,000 cycles, it maintained superior ORR performance with minimal decay. Quantum mechanical calculations using hybrid density functional theory reveal that the improved performance is due to the synergistic contributions from Pt nanoparticles and the apical active sites on the DEF-PtSe2 surface. This work highlights the potential of DEF-PtSe2 as a durable electrocatalyst for ORR, offering insights into PtM dichalcogenide electrochemistry and the design of advanced catalysts.

Rational Assembly of Three-component Coordination Polymers as Heterogeneous Catalysts for CO2 Cycloaddition and Cyanosilylation Reactions.

Four new coordination polymers based on 5-(((1H-imidazol-2-yl)methyl)amino) isophthalic acid (H3L) and auxiliary ligands (1,10-phenanthroline, 2,2'-bipyridine, and 4,4'-bipyridine), namely, {[Zn(HL)(phen)(H2O)]·2H2O}n (CP 1), {[Ni(HL)(phen)(H2O)]}n (CP 2), {[Ni(HL)(2,2'-bpy)(H2O)]·2H2O}n (CP 3) and {[Cd(HL)(4,4'-bpy)0.5(H2O)]·2H2O}n (CP 4) were rationally assembled. Furthermore, these four CPs were screened as heterogeneous catalysts for CO2 cycloaddition and cyanosilylation reactions under mild conditions. The catalytic experiments showed that CP 1 had the better catalytic performance, excellent substrate tolerance and recyclability for the above two reactions. It is speculated that the excellent activity of CP 1 may be due to the open Lewis base site and the Lewis acidic characteristics of the zinc (II) center. After five cycles, the catalytic activities of CP 1 did not significantly decrease, and the structures remained unchanged. Therefore, the CP 1 was considered efficient and stable heterogeneous catalysts for above the two reactions.

Enhanced synergistic catalysis of bisphenol A in river water using an anti-aging photocatalytic membrane

Bisphenol A (BPA), as an endocrine disruptor, poses a potential threat to ecosystems and human health in aquatic environments. Membrane catalytic systems can accelerate the degradation of BPA and facilitate its conversion into harmless compounds. Nevertheless, the complex nature of the water environments and the limited stability of catalysts often result in challenges such as catalyst aging and deactivation. Herein, an anti-aging multifunctional AgFeO2 catalytic material with electron transfer membrane support was prepared for synergistic catalysis of low-energy LED light (12 W) excitation and peroxydisulfate (PDS) activation. The anti-aging photocatalytic membrane completely degraded 10 ppm of BPA within 30 min, and did not show significant aging after the long-term synergistic catalytic process. In addition, actual river water was employed to assess the aging process and catalytic efficiency in a practical environment. A 60.79 cm2 photocatalytic membrane completely purified 10 L of BPA polluted river water, while the total organic carbon content decreased by 50 %. This was mainly due to the synergistic catalytic effect of the membrane, which boosted photoelectron transfer through electron transfer shortcuts, thereby enhancing persulfate activation. Overall, the multifunctional membrane provides an effective strategy for achieving a long-lasting catalytic effect and controlling photocatalyst aging in practice.