Impact of Heat Treatment on the Oxygen Reduction Reaction Performance of PtCo/C(N) Electrocatalyst in PEM Fuel Cell

Abstract

AbstractThe synthesis of efficient and stable Pt alloy catalysts is a major challenge for the commercialization of PEMFC. Herein, we report a PtCo/C(N) electrocatalyst prepared by Na2CO3‐assisted urea liquid‐phase deposition strategy as an efficient cathodic oxygen reduction reaction electrocatalyst, and test its activity and stability in a rotating disc electrode and a single‐cell. The membrane electrode prepared with PtCo/C(N)‐800 °C catalyst has an output voltage of 0.652 V at 2 A/cm2 and a maximum power density of 1.501 W/cm2, which are 36 mV and 81 W/cm2 higher than those of commercial Pt/C catalyst, respectively. In addition, the mass activity and half‐wave potential of PtCo/C(N)‐800 °C are 2.44 times and 50 mV higher than those of commercial Pt/C, respectively. After 5000 voltammetric cycles, its mass activity and half‐wave potential only lose 35 A/gPt and 9 mV, respectively. XPS results show that the binding energy of Pt 4f is positively shifted relative to Pt/C‐TKK, and the d‐band center of Pt decreases, leading to weak chemical interaction between the oxygen‐containing intermediate and the surface of the electrocatalyst, which is conducive to the improvement of the ORR activity and stability of the catalyst.