Spider Silk Proteins Research Articles

In Vitro Study of Human Immune Responses to Hyaluronic Acid Hydrogels, Recombinant Spidroins and Human Neural Progenitor Cells of Relevance to Spinal Cord Injury Repair.

Scaffolds of recombinant spider silk protein (spidroin) and hyaluronic acid (HA) hydrogel hold promise in combination with cell therapy for spinal cord injury. However, little is known concerning the human immune response to these biomaterials and grafted human neural stem/progenitor cells (hNPCs). Here, we analyzed short- and long-term in vitro activation of immune cells in human peripheral blood mononuclear cells (hPBMCs) cultured with/without recombinant spidroins, HA hydrogels, and/or allogeneic hNPCs to assess potential host–donor interactions. Viability, proliferation and phenotype of hPBMCs were analyzed using NucleoCounter and flow cytometry. hPBMC viability was confirmed after exposure to the different biomaterials. Short-term (15 h) co-cultures of hPBMCs with spidroins, but not with HA hydrogel, resulted in a significant increase in the proportion of activated CD69+ CD4+ T cells, CD8+ T cells, B cells and NK cells, which likely was caused by residual endotoxins from the Escherichia coli expression system. The observed spidroin-induced hPBMC activation was not altered by hNPCs. It is resource-effective to evaluate human compatibility of novel biomaterials early in development of the production process to, when necessary, make alterations to minimize rejection risk. Here, we present a method to evaluate biomaterials and hPBMC compatibility in conjunction with allogeneic human cells.

Fibrillar Nanomembranes of Recombinant Spider Silk Protein Support Cell Co-culture in an In Vitro Blood Vessel Wall Model.

Basement membrane is a thin but dense network of self-assembled extracellular matrix (ECM) protein fibrils that anchors and physically separates epithelial/endothelial cells from the underlying connective tissue. Current replicas of the basement membrane utilize either synthetic or biological polymers but have not yet recapitulated its geometric and functional complexity highly enough to yield representative in vitro co-culture tissue models. In an attempt to model the vessel wall, we seeded endothelial and smooth muscle cells on either side of 470 ± 110 nm thin, mechanically robust, and nanofibrillar membranes of recombinant spider silk protein. On the apical side, a confluent endothelium formed within 4 days, with the ability to regulate the permeation of representative molecules (3 and 10 kDa dextran and IgG). On the basolateral side, smooth muscle cells produced a thicker ECM with enhanced barrier properties compared to conventional tissue culture inserts. The membranes withstood 520 ± 80 Pa pressure difference, which is of the same magnitude as capillary blood pressure in vivo. This use of protein nanomembranes with relevant properties for co-culture opens up for developing advanced in vitro tissue models for drug screening and potent substrates in organ-on-a-chip systems.

Gene expression profiling reveals candidate genes for defining spider silk gland types

Molecular studies of the secretory glands involved in spider silk production have revealed candidate genes for silk synthesis and a complicated history of spider silk gene evolution. However, differential gene expression profiles of the multiple silk gland types within an individual orb-web weaving spider are lacking. Each of these gland types produces a functionally distinct silk type. Comparison of gene expression among spider silk gland types would provide insight into the genes that define silk glands generally from non-silk gland tissues, and the genes that define silk glands from each other. Here, we perform 3’ tag digital gene expression profiling of the seven silk gland types of the silver garden orb weaver Argiope argentata. Five of these gland types produce silks that are non-adhesive fibers, one silk includes both fibers and glue-like adhesives, and one silk is exclusively glue-like. We identify 1275 highly expressed, significantly upregulated, and tissue specific silk gland specific transcripts (SSTs). These SSTs include seven types of spider silk protein encoding genes known as spidroin genes. We find that the fiber-producing major ampullate and minor ampullate silk glands have more similar expression profiles than any other pair of glands. We also find that a subset of the SSTs is enriched for transmembrane transport and oxidoreductases, and that these transcripts highlight differences and similarities among the major ampullate, minor ampullate, and aggregate silk glands. Furthermore, we show that the wet glue-producing aggregate glands have the most unique SSTs, but still share some SSTs with fiber producing glands. Aciniform glands were the only gland type to share a majority of SSTs with other silk gland types, supporting previous hypotheses that duplication of aciniform glands and subsequent divergence of the duplicates gave rise to the multiple silk gland types within an individual spider.

Designing of spider silk proteins for human induced pluripotent stem cell-based cardiac tissue engineering.

Materials made of recombinant spider silk proteins are promising candidates for cardiac tissue engineering, and their suitability has so far been investigated utilizing primary rat cardiomyocytes. Herein, we expanded the tool box of available spider silk variants and demonstrated for the first time that human induced pluripotent stem cell (hiPSC)-derived cardiomyocytes attach, contract, and respond to pharmacological treatment using phenylephrine and verapamil on explicit spider silk films. The hiPSC-cardiomyocytes contracted for at least 14 days on films made of positively charged engineered Araneus diadematus fibroin 4 (eADF4(κ16)) and three different arginyl-glycyl-aspartic acid (RGD)-tagged spider silk variants (positively or negatively charged and uncharged). Notably, hiPSC-cardiomyocytes exhibited different morphologies depending on the spider silk variant used, with less spreading and being smaller on films made of eADF4(κ16) than on RGD-tagged spider silk films. These results indicate that spider silk engineering is a powerful tool to provide new materials suitable for hiPSC-based cardiac tissue engineering.

Spider silk: A natural marvel of mechanical and structural strength

The spider silk fibers have unique high performance properties that make it a desirable model for artificial fibers and its performance under benign conditions has important implications for biomimicry. It has tensile strengths comparable to steel and some are nearly as elastic as rubber on a weight to weight basis. The spider spins its silk at ambient temperatures, low pressures and with water as solvent. Spiders are ectotherms and the ambient temperature affects the spinning speed and the mechanical and structural properties of the silk spun. The high cytocompatibility and low immunogenicity of spider silk fibers make them well suited for biomaterial products such as nerve conduits. Spider silk proteins have been shown to be soluble in ionic liquids, thus once soluble, they can be processed into new biomaterials such as films, gels, porous sponges, bone tissue engineering. The spider silk chains with a fixed molecular weight decreases exponentially with the UV irradiation time, since UV irradiation causes the chemical bonds in the protein chains to undergo cleavage. This paper reviews related literature on the spider silk spinning process, conditions and their effects on structure, mechanical properties of spider silk and its resistance to UV degradation. As a bonus, a brief review of the biotechnological production of recombinant spider silk us presented.

Progress in the application of spider silk protein in medicine.

Spider silk protein has attracted much attention on account of its excellent mechanical properties, biodegradability, and biocompatibility. As the main protein component of spider silk, spidroin plays important role in spider spinning under natural circumstances and biomaterial application in medicine as well. Compare to the native spidroin which has a large molecular weight (>300 kDa) with highly repeat glycine and polyalanine regions, the recombinant spidroin was maintained the core amino motifs and much easier to collect. Here, we reviewed the application of recombinant spider silk protein eADF4(C16), major ampullate spidroin (MaSp), minor ampullate spidroin (MiSp), and the derivatives of recombinant spider silk protein in drug delivery system. Moreover, we also reviewed the application of spider silk protein in the field of alternative materials, repairing materials, wound dressing, surgical sutures along with advances in recombinant spider silk protein.

Large scale production of synthetic spider silk proteins in Escherichia coli

Spider silk, which has remarkable mechanical properties, is a natural protein fiber produced by spiders. Spiders cannot be farmed because of their cannibalistic and territorial nature. Hence, large amounts of spider silk cannot be produced from spiders. Genetic engineering is an alternative approach to produce large quantities of spider silk. Our group has produced synthetic spider silk proteins in E. coli to study structure/function and to produce biomaterials comparable to the silks produced by orb-weaving spiders. Here we give a detailed description of our cloning, expression, and purification methods of synthetic spider silk proteins ranging from ~30 to ~200 kDa. We have cloned the relevant genes of the spider Nephila clavipes and introduced them into bacteria to produce synthetic spider silk proteins using small and large-scale bioreactors. We have optimized the fermentation process, and we have developed protein purification methods as well. The purified proteins are spun into fibers and are used to make alternative materials like films and adhesives with various possible commercial applications.

Recombinant Spider Silk Protein Matrices Facilitate Differentiation of Neural Stem Cells Into Mature and Functional Neurons

Neural stem cells (NSCs) show great promise in drug discovery and clinical application. Yet few efforts have been made to optimize biocompatible materials for such cells to be expanded and used in clinical conditions. We have previously demonstrated that NSCs are readily cultured on substrates of certain recombinant spider silk protein without addition of animal- or human-derived components. The question remains however whether this material allows differentiation into functional neurons, and whether such differentiation can take place also when the NSCs are cultured not only upon but also within the biodegradable material. Here we demonstrate that “foam”-like structures generated from recombinant spider silk protein (4RepCT) provided excellent matrices for the generation and multicellular analysis of functional excitatory neurons from NSCs without addition of animal- or human-derived components. NSCs isolated from the cerebral cortices of rat embryos were cultured at either 4RepCT matrices shaped as foam-like structures without coating, or on conventional polystyrene plates coated with poly-L-ornithine and fibronectin. Upon treatment with recombinant proteins including the extracellular signaling factor BMP4 or a combination of BMP4 and the signaling factor Wnt3a, the cortical NSCs cultured in 4RepCT foam-like structures differentiated efficiently into neurons that responded to glutamate receptor agonists, such as AMPA, to the same extent as control cultures. Matrices derived from recombinant spider silk proteins thus provide a functional microenvironment for neural stem cells with little or no animal- or human-derived components and can be employed in the development of new strategies in stem cell research and tissue engineering.

Recombinant major ampullate spidroin-particles as biotemplates for manganese carbonate mineralization

Mineral deposition in biological systems is often templated by organic matrices including proteins directing the nucleation and growth of bioceramics by interacting with early stage species of the mineralization process or coordinating specific facets of the forming crystal. Structurally, charged surface patches are a characteristic motif of biomineralization-associated proteins, which are able to accumulate and bind ions from the surrounding media and, therefore, initiate, promote or inhibit mineralization. Controlled protein engineering enables the manipulation and control of bioinspired in vitro precipitation systems, and thus not only opens prospects for the design of environmentally benign synthetic strategies towards hierarchically structured functional materials, but also enhances the understanding of fundamental interaction mechanisms in biomineralization processes. Here, two recombinant variants of the spider silk protein ADF4 were engineered with oppositely charged peptide tags. Both were processed into micrometer-sized particles and investigated for their influence on manganese carbonate mineralization. Micro- and nano-structured manganese carbonate represents an attractive material for diverse applications including catalysis and wastewater treatment. While both types of spider silk particles were incorporated into the mineral structure, the positively tagged proteins appeared to interact more strongly with the formed manganese carbonate crystals than their negatively charged counterparts. Combination of the spider silk particles and poly(acrylic acid) (PAA), a water-soluble structure-directing agent associated with the stabilization of amorphous precursor phases in carbonates, resulted in the formation of film-like non-equilibrium structures of MnCO3 entrapping the spider silk particles. With the aim to gain mechanistic insights and to elucidate the interaction between the different components involved in the mineralization process, we studied the interplay between PAA, positively or negatively tagged spider silk particles, and Mn(II) ions by time-resolved dynamic light scattering. The here used set-up affords the possibility to identify control strategies for the template-mediated mineralization of manganese carbonate.

Doing What Spiders Cannot-A Road Map to Supreme Artificial Silk Fibers.

Fabricating artificial spider silk fibers in bulk scale has been a major goal in materials science for centuries. Two main routes have emerged for making such fibers. One method uses biomimetics in which the spider silk proteins (spidroins) are produced under nativelike conditions and then spun into fibers in a process that captures the natural, complex molecular mechanisms. However, these fibers do not yet match the mechanical properties of native silk fibers, potentially due to the small size of the designed spidroin used. The second route builds on biotechnological progress that enables production of large spidroins that can be spun into fibers by using organic solvents. With this approach, fibers that equal the native material in terms of mechanical properties can be manufactured, but the yields are too low for economically sustainable production. Hence, the need for new ideas is urgent. Herein, we introduce a structural-biology-based approach for engineering artificial spidroins that circumvents the laws with which spidroins, being secretory proteins, have to comply in order to avoid membrane insertion and provide a road map to the production of biomimetic silk fibers with improved mechanical properties.

Dichroic Fourier Transform Infrared Spectroscopy Characterization of the β-Sheet Orientation in Spider Silk Films on Silicon Substrates.

Orientation analysis of the β-sheet structure within films of the established recombinant spider silk protein eADF4(C16) was performed using a concept based on dichroic transmission- and attenuated total reflection-Fourier transform infrared spectroscopy, lineshape analysis, assignment of amide I components to specific vibration modes, and transition dipole moment directions of β-sheet structures. Based on the experimental dichroic ratio R, the order parameter S of β-sheet structures was calculated with respect to uniaxial orientation. Films of eADF4(C16) were deposited on untexturized (Si) and unidirectionally scratched silicon substrates (Si-sc) and post-treated with MeOH vapor. Freshly cast thin and thick eADF4(C16) films out of hexafluoroisopropanol featured β-sheet contents of ≈6%, which increased to >30% after MeOH post-treatment in dependence of time. Pseudo-first order folding kinetics were obtained, suggesting a transition from an unfolded to a folded state. In MeOH post-treated thin films with diameters in the nanometer range, a significant orientation of β-sheets was obtained regardless of the texturization of the silicon substrate (Si, Si-sc). This was rationalized by dichroic ratios of the amide I component at 1696 cm-1 assigned to the (0, π) mode of antiparallel β-sheet structures, whose transition dipole moment M is located in parallel to both β-sheet plane and chain direction. The calculated high molecular order parameter S ≈ 0.40 suggested vertically (out-of-plane) oriented antiparallel β-sheet stacks with tilt angles of γ ≈ 39° to the surface normal. Microscale (thick) films, in contrast, revealed low order parameters S ≈ 0. Scanning force microscopy on thin eADF4 films at silicon substrates showed dewetted polymer film structures rather at the micro-scale. These findings give new insights in the role of the β-sheet crystallite orientation for the mechanical properties of spider silk materials.

Native-like Flow Properties of an Artificial Spider Silk Dope.

Recombinant spider silk has emerged as a biomaterial that can circumvent problems associated with synthetic and naturally derived polymers, while still fulfilling the potential of the native material. The artificial spider silk protein NT2RepCT can be produced and spun into fibers without the use of harsh chemicals and here we evaluate key properties of NT2RepCT dope at native-like concentrations. We show that NT2RepCT recapitulates not only the overall secondary structure content of a native silk dope but also emulates its viscoelastic rheological properties. We propose that these properties are key to biomimetic spinning and that optimization of rheological properties could facilitate successful spinning of artificial dopes into fibers.

Preparation of controlled degradation of insulin-like growth factor 1/spider silk protein nanofibrous membrane and its effect on endothelial progenitor cell viability

ABSTRACT The present study aimed to prepare a kind of controlled-releasing insulin-like growth factor 1 (IGF-1)/spider silk protein nanofibrous membrane using a electrostatic spinning method and evaluated its effect on the cell viability of endothelial progenitor cells (EPCs). Recombinant spidroin named as GMCDRSSP-IgF-1 was electro-spun into nanofibrous membrane which can be degraded by protease and be capable of sustained-release of IGF-1. The membrane can be degraded after being treated with thrombin. The release assay results showed that IGF-1 concentration could be maintained at 20 ng/ml for a long time with treatment of Tobacco Etch Virus (TEV) protease. The viability of EPCs on GMCDRSSP-IgF-1 nanofibrous membrane was significantly increased with the presence of TEV protease. The controlled and sustained release of IGF-1 from the nanofibrous membrane could promote the adhesion and viability of EPCs. In summary, the nanofibrous membrane that exhibits controlled degradation and sustained release of IGF-1 was prepared with electrostatic spinning from genetically modified recombinant spider silk protein. The nanofibrous membrane exhibited good blood compatibility and cytocompatibility. With the presence of TEV protease, the sustained-release of IGF-1 significantly promoted the adhesion and viability of EPCs. The new nanofibrous membrane can be potentially used as a scaffold for EPCs culture in vitro and future in vivo studies.

Transcriptome analysis provides insights into a molecular mechanism of histamine response in the cyprid larvae of Amphibalanus amphitrite

Barnacles are notorious marine fouling creatures; their planktonic cyprid larvae attach to material substrates and metamorphose. Histamine has shown great importance in regulating cyprid settlement and metamorphosis. This study aimed to investigate the mechanisms of histamine-induced larval settlement. Cyprids were exposed to histamine or loratadine, an anti-histamine compound. The percent larval settlements of the histamine- and anti-histamine-treated cyprids were significantly higher and lower, respectively, than the control group. Transcriptomic analyses showed that histamine-treated cyprids had 18498 differentially expressed genes (DEGs, 14531 up-regulated, 3967 down-regulated) and the anti-histamine group had 18055 DEGs (17237 up-regulated, 818 down-regulated) in comparison to untreated controls. In both treatment groups, significant enrichment of DEGs involved in the mitogen-activated protein kinase signaling pathway was observed. Based on the results of larval settlement bioassays, we set 4 filter conditions to perform DEG analyses, and 19 DEGs were selected as functional genes related to cyprid settlement. The functional categories of these genes included structural proteins, spider silk proteins, energy metabolism proteins, cement proteins, glycosyl proteins, and multifunctional proteins. The energy metabolism protein AdipoR was significantly up-regulated in the histamine-treated cyprids but significantly down-regulated in the anti-histamine group. The activity of adenosine monophosphate-activated protein kinase, a downstream signaling protein of AdipoR, increased in the histamine-treated group and decreased in the anti-histamine-treated group. Our results provide new insights into the molecular mechanisms underlying the histamine-induced settlement of barnacle cyprids and identify AdipoR as an important gene that can affect the settlement of cyprids, likely through regulating cyprid energy metabolism.

Engineering of biofilms with a glycosylation circuit for biomaterial applications.

Glycosylation is a crucial post-translational modification for a wide range of functionalities. Adhesive protein-based biomaterials in nature rely on heavily glycosylated proteins such as spider silk and mussel adhesive proteins. Engineering protein-based biomaterials genetically enables desired functions and characteristics. Additionally, utilization of glycosylation for biomaterial engineering can expand possibilities by including saccharides to the inventory of building blocks. Here, de novo glycosylation of Bacillus subtilis amyloid-like biofilm protein TasA using a Campylobacter jejuni glycosylation circuit is proposed to be a novel biomaterial engineering method for increasing adhesiveness of TasA fibrils. A C. jejuni glycosylation motif is genetically incorporated to tasA gene and expressed in Escherichia coli containing the C. jejuni pgl protein glycosylation pathway. Glycosylated TasA fibrils indicate enhanced adsorption on the gold surface without disruption of fibril formation. Our findings suggest that N-linked glycosylation can be a promising tool for engineering protein-based biomaterials specifically regarding adhesion.

General Methods to Produce and Assemble Recombinant Spider Silk Proteins.

Orb-weaving spiders are known to spin up to seven types of silks/glues from different silk glands. The inherent mechanical variety of these silks makes them attractive models for a variety of biomaterial design, from superglues to extremely strong and/or extendible fibers. Spider silk spinning is a process in which spinning dope stored in specific glands assembles into fibrils upon chemical and mechanical stimuli. The exploration of silk protein assembly into controllable filaments is vital for both uncovering biological functions and molecular structure relationship, as well as fabricating new biomaterials. This chapter describes the methods for biosynthesis and assembly of recombinant spider silk proteins, which will provide insights into the mechanism exploration of fiber formation and spider silk-based material manufacture.

Designed Spider Silk-Based Drug Carrier for Redox- or pH-Triggered Drug Release.

Targeted drug delivery and controlled drug release can be obtained using specifically designed polymers as carriers. Due to their biocompatibility and biodegradability and especially the lack of an immune response, materials made of spider silk proteins are promising candidates for use in such applications. Particles made of recombinant spider silk proteins have previously been shown to be suitable drug and gene carriers as they could readily be loaded with various drug substances or biologicals, and subsequent release was observed over a defined period of time. However, the respective substances were bound non-covalently via hydrophobic or charge-charge interactions, and hence, the release of loaded substances could not be spatio-temporally controlled. Here, we present a setup of chemically modified recombinant spider silk protein eADF4 and variants thereof, combining their well-established biocompatible properties with covalent drug binding and triggered release upon changes in the pH or redox state, respectively. The usefulness of the spider silk platform technology was shown with model substances and cytostatic drugs bound to spider silk particles or films via a pH-labile hydrazine linker as one option, and the drugs could be released from the spider silk carriers upon acidification of the environment as seen, e.g., in tumorous tissues or endo/lysosomes. Sulfhydryl-bearing spider silk variants allowed model substance release if exposed to intracellular GSH (glutathione) levels as a second coupling option. The combination of non-immunogenic, nontoxic spider silk materials as drug carriers with precisely triggerable release chemistry presents a platform technology for a wide range of applications.

Roll-to-Roll Production of Spider Silk Nanofiber Nonwoven Meshes Using Centrifugal Electrospinning for Filtration Applications.

Filtration systems used in technical and medical applications require components for fine particle deep filtration to be highly efficient and at the same time air permeable. In high efficiency filters, nonwoven meshes, which show increased performance based on small fiber diameters (e.g., using nanofibers), can be used as fine particle filter layers. Nanofiber nonwoven meshes made by electrospinning of spider silk proteins have been recently shown to exhibit required filter properties. Needle-based electrospinning, however, is limited regarding its productivity and scalability. Centrifugal electrospinning, in contrast, has been shown to allow manufacturing of ultrathin polymer nonwoven meshes in an efficient and scalable manner. Here, continuous roll-to-roll production of nonwoven meshes made of recombinant spider silk proteins is established using centrifugal electrospinning. The produced spider silk nanofiber meshes show high filter efficiency in the case of fine particulate matter below 2.5 µm (PM2.5) and a low pressure drop, resulting in excellent filter quality.

Spider silk proteins condense into droplets to form silk

Spider silk proteins condense into droplets to form silk

Cyclic Expansion/Compression of the Air-Liquid Interface as a Simple Method to Produce Silk Fibers.

Self-assembly of recombinant spider silk protein at air-liquid interfaces is used as a starting point to produce homogeneous fiber bundles. The film that is formed on a silk protein solution in a vertically placed syringe is subjected to repeated controlled extension and compression by an oscillating vertical motion. Thereby, a precise breakup of the film can be achieved, followed by transport and roll-up against the syringe wall prior to extraction. Advantages of the method are that it 1) is simple to use; 2) requires a small volume of protein solution (1mL) at relatively low concentration (1mg mL-1 ); 3) can be performed under sterile conditions; 4) does not require any use of coagulants; and 5) is compatible with the addition of viable cells during the process, which thereby are integrated uniformly throughout the fiber.