Soil Moisture Active Passive Radiometer Research Articles

Enhancing Soil Moisture Active–Passive Estimates with Soil Moisture Active–Passive Reflectometer Data Using Graph Signal Processing

The Soil Moisture Active–Passive (SMAP) mission has greatly contributed to the use of remote sensing technologies for monitoring the Earth’s land surface and estimating geophysical parameters that influence the climate system. Since the SMAP mission switched its radar receiver to allow the reception of Global Positioning System (GPS) signals, Global Navigation Satellite System Reflectometry (GNSS-R) configuration has been enabled, providing full polarimetric forward scattering measurements of the Earth’s surface, also known as SMAP Reflectometry or SMAP-R. Polarimetric GNSS-R is beneficial for sensing land surface properties, especially for more accurate estimations of soil moisture (SM) in densely vegetated areas. In this study, we explore the opportunity to enhance SMAP mission soil moisture estimates using reflected GNSS signals. We achieve this by interpolating the sparse reflectivity data with terrain information to disaggregate radiometer brightness temperatures. Our main objective is to present a novel algorithm based on Graph Signal Processing (GSP) that uses reflectometry data to enhance SMAP radiometer observations and ultimately improve SM retrievals. By implementing methods from the GSP field, we formulate the reflectivity interpolation problem as a signal reconstruction on a graph, where the weights of the edges between the nodes are chosen as a function of geophysical information. Subsequently, using the retrieved reflectivity maps, we increase the resolution of the brightness temperature data, leading to an improvement in the SM estimates. Initial findings indicate that our GSP method presents a promising alternative for analyzing sparse remote sensing observations, leveraging Earth’s surface geophysical information. This approach results in a notable improvement, with a reduced Root Mean Square Error (RMSE) of 11.8% compared to SMAP data and a reduction in unbiased RMSE (uRMSE) by 14.7% over vegetated areas.

Integration of Sentinel-1A Radar and SMAP Radiometer for Soil Moisture Retrieval over Vegetated Areas.

NASA's Soil Moisture Active Passive (SMAP) was originally designed to combine high-resolution active (radar) and coarse-resolution but highly sensitive passive (radiometer) L-band observations to achieve unprecedented spatial resolution and accuracy for soil moisture retrievals. However, shortly after SMAP was put into orbit, the radar component failed, and the high-resolution capability was lost. In this paper, the integration of an alternative radar sensor with the SMAP radiometer is proposed to enhance soil moisture retrieval capabilities over vegetated areas in the absence of the original high-resolution radar in the SMAP mission. ESA's Sentinel-1A C-band radar was used in this study to enhance the spatial resolution of the SMAP L-band radiometer and to improve soil moisture retrieval accuracy. To achieve this purpose, we downscaled the 9 km radiometer data of the SMAP to 1 km utilizing the Smoothing Filter-based Intensity Modulation (SFIM) method. An Artificial Neural Network (ANN) was then trained to exploit the synergy between the Sentinel-1A radar, SMAP radiometer, and the in situ-measured soil moisture. An analysis of the data obtained for a plant growing season over the Mississippi Delta showed that the VH-polarized Sentinel-1A radar data can yield a coefficient of correlation of 0.81 and serve as a complimentary source to the SMAP radiometer for more accurate and enhanced soil moisture prediction over agricultural fields.

Spatial downscaling of SMAP radiometer soil moisture using radar data: Application of machine learning to the SMAPEx and SMAPVEX campaigns

This study developed a random forest approach for downscaling the coarse-resolution (36 km) soil moisture measured by The National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) mission to 1 km spatial resolution, utilizing airborne remotely sensed data (radar backscatter and radiometer retrieved soil moisture), vegetation characteristics (normalized difference vegetation index), soil properties, topography, and ground soil moisture measurements from before the launch of SMAP for training a random forest model. The 36 km SMAP soil moisture product was then downscaled by the trained model to 1 km resolution using the information from SMAP. The downscaled soil moisture was evaluated using airborne retrieved soil moisture observations and ground soil moisture measurements. Considering the airborne retrieved soil moisture as a reference, the results demonstrated that the proposed random forest model could downscale the SMAP radiometer product to 1 km resolution with a correlation coefficient of 0.97, unbiased Root Mean Square Error of 0.048 m3 m−3 and bias of 0.016 m3 m−3. Accordingly, the downscaled soil moisture captured the spatial and temporal heterogeneity and demonstrated the potential of the proposed machine learning model for soil moisture downscaling.

Brief communication: Identification of tundra topsoil frozen/thawed state from SMAP and GCOM-W1 radiometer measurements using the spectral gradient method

Abstract. From 2015 to 2020, using the spectral gradient radiometric method, the possibility of the frozen/thawed (FT) state identification of tundra soil was investigated based on Soil Moisture Active Passive (SMAP) and Global Change Observation Mission – Water Satellite 1 (GCOM-W1) satellite observations of 10 test sites located in the Arctic regions of Canada, Finland, Russia, and the USA. It is shown that the spectral gradients of brightness temperature and reflectivity (measured in the frequency range from 1.4 to 36.5 GHz with horizontal polarization, a determination coefficient from 0.775 to 0.834, a root-mean-square error from 6.6 to 10.7 d and a bias from −3.4 to +6.5 d) make it possible to identify the FT state of the tundra topsoil. The spectral gradient method has a higher accuracy with respect to the identification of the FT state of tundra soils than single-frequency methods based on the calculation of polarization index.

Tropical Cyclone Wind Field Reconstruction and Validation Using Measurements from SFMR and SMAP Radiometer

Accurate information on tropical cyclone position, intensity, and structure is critical for storm surge prediction. Atmospheric reanalysis datasets can provide gridded, full coverage, long-term and multi-parameter atmospheric fields for the research on the impact of tropical cyclones on the upper ocean, which effectively makes up for the uneven temporal and spatial distribution of satellite remote sensing and in situ data. However, the reanalysis data cannot accurately describe characteristic parameters of tropical cyclones, especially in high wind conditions. In this paper, the performance of the tropical cyclone representation in ERA5 (European Centre for Medium-Range Weather Forecasts Reanalysis 5th Generation) is investigated and analyzed with respect to IBTrACS (International Best Track Archive for Climate Stewardship) during the period 2018–2020. Comparisons demonstrate that ERA5 winds significantly underestimate the maximum wind speed during the tropical cyclones (>30 m/s) compared to those provided by IBTrACS. An effective wind reconstruction method is examined to enhance tropical cyclone intensity representation in reanalysis data in 94 cases of 31 tropical cyclones 2018–2020. The reconstructed wind speeds are in good agreement with the SFMR (Stepped Frequency Microwave Radiometer) measured data and SMAP (Soil Moisture Active Passive) L-band radiometer remotely sensed measurements. The proposed wind reconstruction method can effectively improve the accuracy of the tropical cyclone representation in ERA5, and will benefit from the establishment of remote sensing satellite retrieval model and the forcing fields of the ocean model.

Error and uncertainty characterization of soil moisture and VOD retrievals obtained from L-band SMAP radiometer

L-band passive microwave remote sensing has evolved over the past decade to estimate soil moisture (SM) and Vegetation Optical Depth (VOD). Novel Radiative Transfer Model (RTM) schemes and model parameterizations are proposed to achieve this goal. In this work, we attempt to characterize errors and uncertainties that propagate from RTMs and their parameters while retrieving SM and VOD from Soil Moisture Active Passive (SMAP) data. Three RTMs are considered, including a zeroth order model (τ-ω model) and two first order models (First order RTM and 2-Stream Emission model (2S-EM)). Surface roughness (h; characterizes undulations on soil surface) and single scattering albedo (ω; accounts for the scattering of emissions due to vegetation structure) are the two parameters (of RTMs) considered. SM and VOD are retrieved concurrently using a multi-temporal RTM inversion scheme. Errors and uncertainty contributions are determined using the Analysis of Variance (ANOVA) approach. To assess the role of land cover conditions on error and uncertainties in retrievals, ten reference sites are chosen to represent various biomes.Initially, brightness temperatures are simulated by varying RTMs and their parameters to determine their sensitivity. The SM and VOD retrievals are compared with reference datasets, and the performance is found to be acceptable. Error decomposition analysis indicates RTMs and their parameters (h and ω) induce noticeable and significant error in SM and VOD retrievals. Errors contributions due to the above factors are more prominent in VOD retrievals compared to SM. However, the uncertainty contributions indicate minimal influence of RTMs and their parameters on SM retrievals. The ω parameter followed by the choice of RTM have significant contributions to the uncertainty in the VOD retrievals. The h parameter resulted in significant uncertainties in VOD retrievals under sparsely vegetated regions. The results are used to comment on the suitability of each of the three RTMs and the model parameterization design that could alleviate the issue of errors and uncertainties in concurrent retrievals of SM and VOD. These inferences shall contribute towards developing robust multi-parameter retrieval algorithms.

Resolution Enhancement of SMAP Passive Soil Moisture Estimates

The Soil Moisture Active Passive (SMAP) mission includes a unique combination of instruments intended to provide daily global soil moisture data with high accuracy and resolution. Due to radar instrument failure, the default resolution of the data product decreased from the intended 9 km to 36 km shortly after the mission started to return data. To improve this, we employed the Scatterometer Image Reconstruction algorithm in its radiometer form (rSIR) to enhance the resolution of the radiometer brightness temperature measurements from which the soil moisture was derived. This paper compares the soil moisture estimates created from the rSIR-enhanced brightness temperatures with SMAP project radiometer L2_SM_SP and SMAP-Sentinel L2_SM_P products reported on 9 km and 3 km grids, respectively. We find that the difference of the rSIR-enhanced passive soil moisture product is generally within 0.020 cm3 cm−3 RMS of the 9 km SMAP radiometer L2_SM_SP and 0.045 cm3 cm−3 RMS of the 3 km SMAP-Sentinel L2_SM_P soil moisture products. The accuracy of the rSIR soil moisture can be improved by including better antenna pattern correction methods applied to the input TB measurements.

Comparison of soil dielectric mixing models for soil moisture retrieval using SMAP brightness temperature over croplands in India

The accurate estimation of soil moisture (SM) using microwave remote sensing depends mostly on careful selection of retrieval parameters among which the soil dielectric mixing model is the important one. These models are often categorized into empirical, semi-empirical or volumetric based on their methodologies and input data requirements. To study in detail, the comparative performance of four dielectric mixing models -- Wang & Schmugge model, Hallikainen model, Dobson model and Mironov model were used with Soil Moisture Active Passive (SMAP) L-band brightness temperature and Single Channel Algorithm for SM retrieval over agricultural landscapes in India. The highest performance statistics combination in terms of Root Mean Square Error (RMSE), correlation coefficient (R2) and percentage bias (PBIAS) against the concurrent in-situ SM measurements were calculated at the selected validation sites. The overall results indicate that the best performance was given by the Mironov model (RMSE = 0.07 m3/m3), followed by Wang & Schmugge model (RMSE = 0.08 m3/m3), Hallikainen model (RMSE = 0.09 m3/m3), Dobson model (RMSE = 0.10 m3/m3) and original SMAP radiometer SM (RMSE = 0.12 m3/m3). Findings of this study provides important insights into application and performance of dielectric mixing models in mapping surface SM variations. This study also underlines the pivotal role of local conditions for SM retrieval which should be carefully included in the algorithms.

Study of a Strong L-Band RFI Source

CN006 is the name given by the European Space Agency (ESA) in their reports on radio frequency interference (RFI) to an instance of RFI in the L-band spectral window at 1.413 GHz protected for passive use only. The source of the interference is located east of the Chinese city of Hangzhou in an area with radar installations. Its effect was initially indistinguishable from that of many such RFI sources observed by the ESA's SMOS and NASA's Soil Moisture Active Passive (SMAP) radiometers over China. However, in July 2020, the level of radiation increased dramatically reaching levels exceeding 1700000 K as reported by Soil Moisture and Ocean Salinity (SMOS) becoming the strongest source observed by SMOS. This article describes an analysis of this very strong source (a radar). It provides information to provide insight into an example of a well-defined source of RFI and illustrates the powerful capability of the SMAP radiometer receiver and RFI processing incorporated in it for identifying and understanding interference.

Properties of the RFI Environment at 1400–1427 MHz as Observed by the Soil Moisture Active/Passive Mission Microwave Radiometer

The soil moisture active/passive (SMAP) satellite microwave radiometer has been providing global measurements of L-band thermal emission from Earth since April 2015. Although the radiometer operates in the protected 1400-1427 MHz portion of the radio spectrum, its measurements are still corrupted by either radio frequency interference (RFI) from out-of-band emissions via legal sources or by sources operating in-band illegally. The SMAP radiometer includes a digital backend that enables implementation of multiple ground-based RFI detection and filtering algorithms. This data is used to collect statistics and trends of Earth's RFI environment. This article examines properties of the global RFI environment as observed by SMAP, including information on RFI source properties (obtained from analysis of SMAP multiple detector outputs) and the evolution of the RFI environment in time. Residual RFI contributions after the application of SMAP RFI processing are also examined as preliminary information for the development of future methods to address their effect.

Triple Collocation Analysis for Two Error-Correlated Datasets: Application to L-Band Brightness Temperatures over Land

The error characterization of satellite observations is crucial for blending observations from multiple platforms into a unique dataset and for assimilating them into numerical weather prediction models. In the last years, the triple collocation (TC) technique has been widely used to assess the quality of many geophysical variables acquired with different instruments and at different scales. This paper presents a new formulation of the triple collocation (Correlated Triple Collocation (CTC)) for the case of three datasets that resolve similar spatial scales, with two of them being error-correlated datasets. Besides, the formulation is designed to ensure fast convergence of the error estimators. This approach is of special interest in cases such that finding more than three datasets with uncorrelated errors is not possible and the amount of data is limited. First, a synthetic experiment has been carried out to assess the performance of CTC formulation. As an example of application, the error characterization of three collocated L-band brightness temperature (TB) measurements over land has been performed. Two of the datasets come from ESA (European Space Agency) SMOS (Soil Moisture and Ocean Salinity) mission: one is the reconstructed TB from the operational L1B v620 product, and the other is the reconstructed TB from the operational L1B v620 product resulting from application of an RFI (Radio Frequency Interference) mitigation technique, the nodal sampling (NS). The third is an independent dataset, the TB acquired by a NASA (National Aeronautics and Space Administration) SMAP (Soil Moisture Active Passive) radiometer. Our analysis shows that the application of NS leads to TB error reduction with respect to the current version of SMOS TB in 80% of the points in the global map, with an average reduction of approximately 1 K over RFI-free regions and approximately 1.45 K over strongly RFI-contaminated areas.

On the impact of C-band in place of L-band radar for SMAP downscaling

The National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) mission was launched on 31st January 2015, with the aim of providing global soil moisture maps at 9 km spatial resolution by combining L-band radar and radiometer observations. However, after the SMAP radar became inoperable, NASA decided to utilize the Sentinel 1A/1B C-band SAR data in its place. The new version of baseline brightness temperature (Tb) downscaling algorithm for SMAP is tested using L-band airborne data to evaluate the capabilities of the C-band Sentinel-1A SAR relative to L-band radar data in downscaling the SMAP Tb for achieving high resolution brightness temperature. In this study, the downscaling algorithm used L-band airborne Synthetic Aperture Radar (SAR) backscatter (σ) collected from the fifth Soil Moisture Active Passive Experiment (SMAPEx-5) in south-eastern Australia to downscale 36 km L-band SMAP radiometer Tb pixels to 3 km and 9 km. The downscaling results were then compared with the published results using Sentinel-1A C-band backscatter, and evaluated against airborne 1 km resolution L-band passive microwave brightness temperature collected from SMAPEx-5. The results show that for vertical polarization the average Root Mean Square Error (RMSE) of downscaled Tb when compared with reference airborne Tb across 4 days at 9 km resolution were 4.9 K for L-band and 6.0 K for C-band, and increased to 9.3 K for L-band and 9.6 K for C-band at 3 km spatial resolution. Moreover, the correlation coefficient (R) of downscaled and reference Tb across the 4 days was 0.92 for L-band and 0.88 for C-band at 9 km, decreasing to 0.75 for L-band and 0.72 for C-band at 3 km spatial resolution. Accordingly, the RMSE increased and the correlation coefficient decreased when using C-band radar data in place of that at L-band. However, overall there is expected to be only a slight decrease in performance of the downscaling algorithm by using the Sentinel 1A data in place of the SMAP radar.

Improved SMAP Dual-Channel Algorithm for the Retrieval of Soil Moisture

The soil moisture active passive (SMAP) mission was designed to acquire L-band radiometer measurements for the estimation of soil moisture (SM) with an average ubRMSD of not more than 0.04 $\text{m}^{3}/\text{m}^{3}$ volumetric accuracy in the top 5 cm for vegetation with a water content of less than 5 kg/ $\text{m}^{2}$ . Single-channel algorithm (SCA) and dual-channel algorithm (DCA) are implemented for the processing of SMAP radiometer data. The SCA using the vertically polarized brightness temperature (SCA-V) has been providing satisfactory SM retrievals. However, the DCA using prelaunch design and algorithm parameters for vertical and horizontal polarization data has a marginal performance. In this article, we show that with the updates of the roughness parameter $h$ and the polarization mixing parameters $Q$ , a modified DCA (MDCA) can achieve improved accuracy over DCA; it also allows for the retrieval of vegetation optical depth (VOD or $\tau$ ). The retrieval performance of MDCA is assessed and compared with SCA-V and DCA using four years (April 1, 2015 to March 31, 2019) of in situ data from core validation sites (CVSs) and sparse networks. The assessment shows that SCA-V still outperforms all the implemented algorithms.

An efficient model for the prediction of SMAP sea surface salinity using machine learning approaches in the Persian Gulf

ABSTRACTSea Surface Salinity (SSS) is a pre-eminent parameter in oceanology causing extreme climate and weather events such as floods and droughts. Therefore, knowledge discovery of SSS is increasingly becoming a fundamental problem in recent years. However, not only the inadequacy of in-situ SSS data in large ocean basins are hampering conduction of detailed analyses of patterning SSS variations but also conventional data-gathering techniques for SSS estimation are often too expensive and time-consuming to meet the amount of data required in SSS estimation studies. Conversely, the brand-new Soil Moisture Active-Passive (SMAP) mission could provide validated SSS data along with its main objective soil moisture retrieval. As a result, collecting a candidate data set of surface’s parameters as inputs to SSS with the aid of Pearson correlation and Boruta feature selection techniques, this paper aims to study the predictive skills of machine learning approaches to estimate SMAP radiometer SSS in the Persian Gulf region from April 2015 to April 2017. Thus, four machine learning methods including Support Vector Regression (SVR), artificial neural network (ANN), random forest (RF) and gradient boosting machine (GBM) were adopted to model the SSS. Two approaches of GBM and RF provided scarcely equivalent predictions for both the calibration and validation data sets that were distinguishably substantiated by experimental results and simulations, nonetheless, slightly superior results were attained with the GBM model by correlation coefficient (r) = 0.734, root mean squared error (RMSE) = 0.906 and mean absolute error (MAE) = 0.627. The findings demonstrate promising SSS estimation from SMAP, which could provide a baseline to perceive the large-scale changes in SSS.

Detection of Residual “Hot Spots” in RFI-Filtered SMAP Data

Radio frequency interference (RFI) is a well-documented problem for passive remote sensing of the Earth at L-band even though the measurements are made in the protected band at 1.413 GHz. Consequently, filtering for RFI is an important early step in the processing of measurements made by the SMAP (Soil Moisture Active/Passive) radiometer. However, the filtered data still include regions with suspiciously high antenna temperatures. One possible cause of these “hot spots” is interference not fully detected during RFI filtering. This paper presents evidence supporting this hypothesis and describes an algorithm to identify these “hot spots” so that they can be removed from the measurements. The impact of removing these “hot spots” is generally small, but evidence is presented that the brightness temperature and soil moisture improve when the hot spots are removed.

Improving Brightness Temperature Measurements Near Coastal Areas for SMAP

The Soil Moisture Active Passive (SMAP) mission is designed to acquire L -band radiometer measurements for the estimation of soil moisture with 0.04 m3/m3 volumetric accuracy in the top 5 cm for vegetation with water content of less than 5 kg/m2. In regions near the coast or near inland bodies of water, the signal measured by the SMAP radiometer contains emissions from land and water, resulting in errors in the soil moisture estimation. In this article, the effort to extract the brightness temperature (TB) according to the land fraction or water fraction (depending on the center of the footprint location) from the affected SMAP measurements was addressed. A single pixel correction algorithm was applied and its performance was evaluated over simulated data. A data-driven approach for the estimation of land and water TB for data correction was developed. The correction algorithm was then applied to real data and its performance was assessed over the SMAP soil moisture retrievals. We showed that the single pixel algorithm is an effective and computationally efficient algorithm for removing land or water TB contamination from the SMAP data.

Version 4 of the SMAP Level‐4 Soil Moisture Algorithm and Data Product

AbstractThe NASA Soil Moisture Active Passive (SMAP) mission Level‐4 Soil Moisture (L.4_SM) product provides global, 3‐hourly, 9‐km resolution estimates of surface (0–5 cm) and root zone (0–100 cm) soil moisture with a mean latency of ~2.5 days. The underlying L4_SM algorithm assimilates SMAP radiometer brightness temperature (Tb) observations into the NASA Catchment land surface model using a spatially distributed ensemble Kalman filter. In Version 4 of the L4_SM modeling system the upward recharge of surface soil moisture from below under nonequilibrium conditions was reduced, resulting in less bias and improved dynamic range of L4_SM surface soil moisture compared to earlier versions. This change and additional technical modifications to the system reduce the mean and standard deviation of the observation‐minus‐forecast Tb residuals and overall soil moisture analysis increments while maintaining the skill of the L4_SM soil moisture estimates versus independent in situ measurements; the average, bias‐adjusted root‐mean‐square error in Version 4 is 0.039 m3/m3 for surface and 0.026 m3/m3 for root zone soil moisture. Moreover, the coverage of assimilated SMAP observations in Version 4 is near global owing to the use of additional satellite Tb records for algorithm calibration. L4_SM soil moisture uncertainty estimates are biased low (by 0.01–0.02 m3/m3) against actual errors (computed versus in situ measurements). L4_SM runoff estimates, an additional product of the L4_SM algorithm, are biased low (by 35 mm/year) against streamflow measurements. Compared to Version 3, bias in Version 4 is reduced by 46% for surface soil moisture uncertainty estimates and by 33% for runoff estimates.

The SMAP and Copernicus Sentinel 1A/B microwave active-passive high resolution surface soil moisture product

Soil Moisture Active Passive (SMAP) mission of NASA was launched in January 2015. Currently, SMAP has an L-band radiometer and a defunct L-band radar with a rotating 6-m mesh reflector antenna. On July 7th, 2015, the SMAP radar malfunctioned and became inoperable. Consequently, the production of high-resolution active-passive soil moisture product got hampered, and only ~2.5 months (April 15th, 2015 to July 7th, 2015) of data remain available. Therefore, during the SMAP post-radar phase, many ways were examined to restart the high-resolution soil moisture product generation of the SMAP mission. One of the feasible approaches was to substitute the SMAP radar with other available SAR data. Sentinel-1A/Sentinel-1B SAR data was found most suitable for combining with the SMAP radiometer data because of its nearly similar orbit configuration that allows overlapping of their swaths with a minimal time difference, a key feature/requirement for the SMAP active-passive algorithm. The Sentinel interferometric wide swath (IW) mode acquisition also provides the co-polarized and cross-polarized observations required for the SMAP active-passive algorithm. However, some differences do exist between the SMAP and Sentinel SAR data. They are mainly: 1) Sentinel has a C-band SAR whereas SMAP operates at L-band; 2) Sentinel has multiple incidence angles within its swath, and SMAP has one single incidence angle; and 3) Sentinel 1A/B Interferometric Wide (IW) swath width is ~250 km as compared to SMAP with 1000 km swath width. On any given day, the narrow swath width of the Sentinel observations significantly reduces the overlap spatial coverage between SMAP and Sentinel as compared to the original SMAP radar and radiometer swath coverage. Hence, the temporal resolution (revisit interval) suffers due to narrow overlapped swath width and degrades from 3 days to 12 days. One advantage of using very high-resolution resolution Sentinel-1A/Sentinel-1B data in the SMAP active-passive algorithm is the potential of obtaining the disaggregated brightness temperature and thus soil moisture at a much finer spatial resolution of 3 km and 1 km at global extent. The assessment of high-resolution product at 3 km and 1 km using the soil moisture calibration and validations sites shows reasonable accuracy of ~0.05 m3/m3. The SMAP-Sentinel1 active-passive high-resolution product is now available to the public (new version released in October 2018) through NSIDC (NASA DAAC). The duration of this product is from April 2015 to current date.

Enhanced-Resolution SMAP Brightness Temperature Image Products

The NASA-sponsored Calibrated Passive Micro- wave Daily Equal-Area Scalable Earth Grid 2.0 Brightness Temperature (CETB) Earth System Data Record Project team has generated a multisensor, multidecadal time series of high-resolution radiometer products designed to support climate studies. This project uses image reconstruction techniques to generate conventional and enhanced-resolution daily brightness temperature images on a standard set of map projections. Sensors included in CETB are the Aqua Advanced Microwave Scanning Radiometer–Earth Observing System (AMSR-E), Scanning Multichannel Microwave Radiometer, and all Special Sensor Microwave/Imager and Special Sensor Microwave Imager/Sounder radiometers. These span frequencies between 6 and 89 GHz. This paper considers the issues of adding the L-band (1.6 GHz) Soil Moisture Active Passive (SMAP) radiometer measurements to the CETB climate record, with emphasis on optimizing the reconstruction to provide the highest possible spatial resolution at the lowest noise level. SMAP radiometer reconstruction on SMAP-standard grids is also considered. Simulation is used to optimize the reconstruction, and the results confirmed using actual data. A comparison of the performance of the Backus–Gilbert approach and the radiometer form of the Scatterometer Image Reconstruction algorithm is provided. These are compared to the conventional drop-in-the-bucket gridded imaging.

Global Assessment of the SMAP Freeze/Thaw Data Record and Regional Applications for Detecting Spring Onset and Frost Events

More than half of the global land area undergoes seasonal frozen and thawed conditions that constrain eco-hydrological processes. The freeze-thaw (FT) retrieval from satellite microwave remote sensing detects landscape changes between frozen and non-frozen conditions due to the strong dependence of surface microwave emissions on liquid water abundance. We conducted an assessment of the latest version (R16) of the NASA Soil Moisture Active Passive (SMAP) Level 3 FT (L3_FT) global product. The L3_FT product provides a global FT classification with 3-day mean temporal fidelity derived using SMAP L-band (1.4 GHz) microwave brightness temperature (Tb) retrievals. The R16 product uses both normalized polarization ratio (NPR) and single channel vertically-polarized Tb (FT-SCV) algorithms to obtain FT retrievals over land areas where frozen temperatures are a significant ecological constraint. The L3_FT product is generated in a standard global grid with similar grid cell resolution (36-km) as the SMAP radiometer footprint. An enhanced 9-km global grid L3_FT product is also produced from optimally interpolated SMAP Tb retrievals. The resulting L3_FT products span a larger domain and longer period (2015–present) than earlier product releases. The L3_FT 36-km results showed a respective global mean annual FT classification accuracy of approximately 78 and 90 percent for descending (AM) and ascending (PM) orbit observations in relation to independent surface air temperature-based FT estimates from ~5000 global weather stations. The FT accuracy was lower in areas with greater terrain complexity, open water and vegetation cover; where the combined land cover factors explained 29–53% of the variability in the SMAP FT global accuracy. The L3_FT 9-km product showed an apparent enhancement of FT spatial patterns, but with ~4% lower accuracy than the 36-km product; the lower 9-km accuracy was attributed to stronger degradation from land cover heterogeneity, particularly in coastal areas, and artifact noise introduced from the spatial interpolation of SMAP Tb retrievals. Selected regional applications indicated product utility in capturing anomalous frost events over Australia and seasonal thaw and spring onset patterns over Alaska. Overall, the L3_FT global accuracy meets or exceeds the FT product science requirements established by the mission, while enabling studies of dynamic FT and water mobility constraints influencing hydrological and ecosystem processes, and global water-carbon-energy cycle linkages.