Resonance Analysis Research Articles

Enhancement of the sensitivity of chalcone derived from vanillin as chemosensor agents for Hg(II) ions through cyclization reaction with arylhydrazine

Water pollution is currently a major problem worldwide. Given its detrimental effects on health, Hg(II) is considered an extremely hazardous heavy metal contaminant, even at low doses. Heterocyclic compounds have been thoroughly evaluated as the chemosensor agents for Hg(II) detection. However, they suffer from poor sensitivity. In this study, we prepared two fluorescence chemosensor agents from vanillin via several steps, i.e., etherification, Claisen–Schmidt, and cyclocondensation reactions to yield N-phenyl- and N-pyridine-pyrazoline compounds. Products characterization was accomplished via spectroscopic techniques. Chalcone, N-phenyl-, and N-pyridine-pyrazoline derivatives were successfully obtained at 87.04%, 90.91%, and 91.73% yields, with limits of detection of 156,840, 65.810, and 161.011 nM, respectively. These results show that the conversion of chalcone to pyrazoline structure improved the sensitivity for Hg(II) detection at the nanomolar level, which is 2384 times lower than that for chalcone. Further spectroscopic investigations through Job's plot, Fourier-transform infrared spectroscopy, and proton-nuclear magnetic resonance analyses revealed that Hg(II) ions were chelated with two nitrogen atoms of pyrazoline. Thus, this phenomenon can explain the considerable sensitivity enhancement for Hg(II) detection. N-Phenyl-pyrazoline is the more sensitive chemosensor to Hg(II) compared with N-pyridine-pyrazoline because the more nitrogen groups in the binding site, the less selective and sensitive the compound. This finding is also supported by the higher binding constant value of N-phenyl-pyrazoline (9.416 × 102 mol−1) than N-pyridine-pyrazoline (1.771 × 102 mol−1). Furthermore, N-phenyl-pyrazoline can be applied in the direct quantification of Hg(II) in tap and groundwater samples with a validity parameter in a range of 80.97%–103.54%.

A novel integrated membrane bioreactor-stirred tank bioreactor system for simultaneous biodegradation of bisphenol A contaminated wastewater and biopolyol production: An approach towards circular bioeconomy

The present work examined the biodegradation of bisphenol A (BPA) under batch and continuous modes using hydrocarbonoclastic bacterium, Pseudomonas aeruginosa PR3. The strain showed great biodegradation potential under batch shake flask and stirred tank reactor. Bacterial growth was considerably inhibited at initial BPA concentrations > 50 mg/L. Further, membrane bioreactor (MBR) for BPA biodegradation was also evaluated under different inlet BPA concentration and hydraulic retention time (HRT) and the maximum BPA removal efficiency of 94.4 % was attained with an influent BPA concentration of 25 mg/L at 5 d of HRT. MBR also showed better performance under shock loading conditions. Identification of BPA biodegraded pathways was also performed using liquid chromatography-mass spectrometry, elucidating the different metabolites and end products formed. A subsequent enhancement in BPA removal efficieny was also observed owing to the microfiltration system of MBR that was applied to separate bacterial biomass from effluent. The maximum removal efficiency was further enhanced to 98.5 % under the same operational schedule. As the strain has the ability to produce extracellular diol synthase enzyme which transforms oleic acid into the biopolyol 7,10-dihydroxy-8(E)-octadecenoic acid, the effluent containing the enzymes was supplemented with 1 % (v/v) oleic acid under whole cell and cell-free approaches. Cell-free technique showed an enhanced bioconversion efficiency in comparison to the traditional whole cell approach. Further, the produced biopolyol was characterized using Fourier transform infrared spectroscopy, thermogravimetry, differential scanning calorimetry, and 1H nuclear magnetic resonance analyses and also depicted the antibacterial activity.

Carboxymethyl cellulose-based rotigotine nanocrystals-loaded hydrogel for increased transdermal delivery with alleviated skin irritation

Transdermal rotigotine (RTG) therapy is prescribed to manage Parkinson's disease (Neupro® patch). However, its use is suffered from application site reactions. Herein, drug nanocrystalline suspension (NS)-loaded hydrogel (NS-HG) employing polysaccharides simultaneously as suspending agent and hydrogel matrix was constructed for transdermal delivery, with alleviated skin irritation. RTG-loaded NS-HG was prepared using a bead-milling technique, employing sodium carboxylmethyl cellulose (Na.CMC) as nano-suspending agent (molecular weight 90,000 g/mol) and hydrogel matrix (700,000 g/mol), respectively. NS-HG was embodied as follows: drug loading: ≤100 mg/mL; shape: rectangular crystalline; crystal size: <286.7 nm; zeta potential: −61 mV; viscosity: <2.16 Pa·s; and dissolution rate: >90 % within 15 min. Nuclear magnetic resonance analysis revealed that the anionic polymers bind to RTG nanocrystals via charge interaction, affording uniform dispersion in the matrix. Rodent transdermal absorption of RTG from NS-HG was comparable to that from microemulsions, and proportional to drug loading. Moreover, NS-HG was skin-friendly; erythema and epidermal swelling were absent after repeated application. Further, NS-HG was chemically stable; >95 % of the drug was preserved up to 4 weeks under long term (25 °C/RH60%), accelerated (40 °C/RH75%), and stress (50 °C) storage conditions. Therefore, this novel cellulose derivative-based nanoformulation presents a promising approach for effective transdermal RTG delivery with improved tolerability.

Mechanistic insights of PO43− functionalized carbon nitride homojunction hydrogels in photocatalytic-self-Fenton-peroxymonosulfate system for tetracycline degradation

In this study, metal-free PO43− enriched g-C3N4/g-C3N4 (PGCN) homojunction alginate 3D beads were developed for in-situ H2O2 production under visible light. Later, the photocatalytic-self-Fenton system was integrated with peroxymonosulfate for tetracycline degradation. Initially, the PO43− enriched g-C3N4 (PCN) and a homojunction composed of PCN and g-C3N4 (GCN) were prepared via the wet-impregnation method. Later, PGCN homojunction was formulated into 3D alginate beads through the blend-crosslinking method. The comprehensive characterization of the homojunction beads affirmed the closer contact between the semiconductors, alteration of the bandgap, faster channelization of electron-hole pairs, and improved separation of charge carriers that attributed to higher catalytic efficacy. The PGCN beads exhibited a maximum H2O2 production of 535 ± 12 µM under visible light irradiation for 60 min. The homojunction hydrogels displayed 99 ± 0.25 % tetracycline degradation in 20 min in the photocatalytic-self-Fenton-PMS system. The experimental studies also claimed a maximum chemical oxygen demand removal of 81 ± 3.6 % in 20 min with maximum reusability of beads up to 20 cycles. The Z-scheme electron migration mechanism is proposed based on the results aided by scavenger and electron spin resonance analysis. Overall, the as-synthesized alginate-supported homojunction-based photocatalytic-self-Fenton-peroxymonosulfate system is highly versatile and reusable for energy and environmental remediation.

Insights into the generation of multiple reactive species in UV254/PMS/I− system and their roles for degradation of phenolic and non-phenolic pollutants

An innovative technology for the removal of phenolic and non-phenolic organic pollutants from aqueous solution was developed by combining UV254 irradiation, peroxymonosulfate (PMS), and iodide ions (I−). Effects of pH, ratio of [I−]/[PMS], initial concentration of pollutant, dissolved organic matter (DOM) and typical inorganic constituents of environmental water on the degradation of studied pollutants with UV254/PMS/I− system were examined. The results showed that pH and [I−]/[PMS] exhibited significant impact on the degradation of pollutants during UV254/PMS/I− process. As the ratio of [I−]/[PMS] increased from 0.1 to 10.0, the removal efficiencies of phenolic pollutants remarkably increased, but those of non-phenolic pollutants decreased. The DOM at high concentration obviously inhibited the degradation of pollutants during UV254/PMS/I− process. Meanwhile, the occurrence of NO3− can slightly enhance the degradation of pollutants, and SO42−, Cl−, and HCO4− ions had no significant effects on UV254/PMS/I− system. The abundant reactive species including OH, SO4−, and I/I2− during UV254/PMS/I− process were generated based on electron spin resonance, fluorescence spectroscopy and steady-state concentration analysis. Quenching experimental results indicated that I/I2− can selectively degrade phenolic pollutants via one-electron oxidation. This study provided a reference for the application of reactive radicals involved oxidative technique in water purification.

Hypochlorite-mediated degradation and detoxification of sulfathiazole in aqueous solution and soil slurry

Although various activated sodium hypochlorite (NaClO) systems were proven to be promising strategies for recalcitrant organics treatment, the direct interaction between NaClO and pollutants without explicit activation is quite limited. In this work, a revolutionary approach to degrade sulfathiazole (STZ) in aqueous and soil slurry by single NaClO without any activator was proposed. The results demonstrated that 100% and 94.11% of STZ could be degraded by 0.025 mM and 5 mM NaClO in water and soil slurry, respectively. The elimination of STZ was shown to involve superoxide anion (O2•−), chlorine oxygen radical (ClO•), and hydroxyl radical (•OH), according to quenching experiments and the analysis of electron paramagnetic resonance. The addition of Cl−, HCO3−, SO42−, and humic acid (HA) marginally impeded the decomposition of STZ, while NO3−, Fe3+, and Mn2+ facilitated the process. The NaClO process exhibited significant removal effectiveness at a neutral initial pH. Moreover, the NaClO facilitated application in various soil samples and water matrices, and the procedure was also successful in effectively eliminating a range of sulfonamides. The suggested NaClO degradation mechanism of STZ was based on the observed intermediates, and the majority of the products exhibited lower ecotoxicity than STZ. Besides, the experiment results by using X-ray diffraction (XRD) and a fourier transform infrared spectrometer (FTIR) indicated the negligible effects on the composition and structure of soil by the treatment of NaClO. Simultaneously, the experimental results also illustrated that the bioavailability of heavy metals and the physiochemical characteristics of the soil before and after the remediation did not change to a significant extent. Following the remediation of NaClO, the phytotoxicity tests showed reduced toxicity to wheat and cucumber seeds. As a result, treating soil and water contaminated with STZ by using NaClO was a reasonably practical and eco-friendly method.

Brønsted Acid-Promoted Cyclodimerization of α,β-Unsaturated γ-Ketoesters: Construction of Fused Pyrano-ketal-lactones and γ-Ylidene-butenolides.

Unprecedented MsOH-promoted diastereoselective cascade dimerization and intramolecular lactonization of readily accessible α,β-unsaturated γ-ketoesters are presented. The results obtained in this work, control experiments, and density functional theory (DFT) calculations suggested that the initial enolization and E to Z isomerization/equilibration of olefin (C=C) of substrate α,β-unsaturated γ-ketoesters give a Z-isomer preferentially over an E-isomer. Subsequently, the Z-isomer undergoes intermolecular annulation with α,β-unsaturated γ-ketoesters via domino Michael addition/ketalization/lactonization steps to furnish fused tetracyclic pyrano-ketal-lactone. However, the Z-isomer prefers intramolecular trans-esterification in a competing pathway and gives bicyclic γ-ylidene-butenolide. The key features of this work include simple Brønsted acid catalysis, the formation of three bonds, two rings, and three contiguous stereogenic centers in a single step, DFT calculations, and the assignment of relative stereochemistry through X-ray diffraction (XRD) and two-dimensional (2D) nuclear magnetic resonance (NMR) analyses.

Radiomic nomogram based on lumbar spine magnetic resonance images to diagnose osteoporosis.

We aimed to establish a novel model using a radiomics analysis of magnetic resonance (MR) images for predicting osteoporosis. To investigate the effectiveness of a radiomics approach utilizing magnetic resonance imaging (MRI) of the lumbar spine in identifying osteoporosis. In this retrospective study, a total of 291 patients who underwent MRI were analyzed. Radiomics features were extracted from the MRI scans of all 1455 lumbar vertebrae, and build the radiomics model based on T2-weighted (T2W), T1-weighted (T1W), and T2W + T1W imaging. The performance of the combined model was assessed using metrics such as the area under the receiver operating characteristic curve (AUC), sensitivity, specificity, and accuracy. The AUCs of these models were compared using the DeLong test. Their clinical usefulness was assessed using a decision curve analysis. T2W, T1W, and T1W + T2W imaging retained 27, 27, and 17 non-zero coefficients, respectively. The AUCS about radiomics scores based on T2W, T1W, and T1W + T2W imaging were 0.894, 0.934, and 0.945, respectively, which all performed better than the clinical model significantly. The rad-signatures based on T1W + T2W imaging, which exhibited a stronger predictive power, were included in the creation of the nomogram for osteoporosis diagnosis, and the AUC was 0.965 (95% confidence interval (CI)=0.944-0.986) in the training cohort and 0.917 (95% CI=0.738-1.000) in the test cohort. The calibration curve indicated that the radiomics nomogram had considerable clinical usefulness in prediction, observation, and decision curve analysis. A reliable and powerful tool for identifying osteoporosis can be provided by the nomogram that combines the T1W and T2W imaging radiomics score with clinical risk factors.

Efficient enzymatic synthesis of vitamin E succinate using an organic solvent‐stable immobilized lipase

AbstractVitamin E succinate has gained substantial attention as a potential therapeutic agent for cancer treatment due to its biomedical activities. One of the prominent methods of synthesizing vitamin E succinate is through enzymatic processes, which, although advantageous, presents inherent challenges related to optimization, scalability, and particularly, the poor stability of lipases in organic solvents. Our study addresses these challenges by conducting a comprehensive comparative analysis between Lipase UM1 and three other immobilized commercial lipases, demonstrating Lipase UM1's enhanced resistance to organic solvents and its superior efficiency in vitamin E succinate production. Further optimization experiments with Lipase UM1 led to an unprecedented conversion of 99%. Additionally, we scaled the reaction to a proof‐of‐concept industrial level. The synthesized product was verified using Fourier transform infrared spectroscopy and nuclear magnetic resonance analysis, ensuring its quality and consistency. This study validates Lipase UM1 as an efficient catalyst for vitamin E succinate synthesis, offering a promising avenue for industrial production with potential applications in cancer therapy and beyond.

Swapping the linkers of canonical Hsp70 and Hsp110 chaperones compromises both self-association and client selection

Plasmodium falciparum heat shock protein 70-1 (PfHsp70-1) and PfHsp70-z are essential cytosol localised chaperones of the malaria parasite. The two chaperones functionally interact to drive folding of several parasite proteins. While PfHsp70-1 is regarded as a canonical Hsp70 chaperone, PfHsp70-z belongs to the Hsp110 subcluster. One of the distinctive features of PfHsp70-z is its unique linker segment which delineates it from canonical Hsp70. In the current study, we elucidated the role of the linker in regulating Hsp70 self-association and client selection. Using recombinant forms of PfHsp70-1, PfHsp70-z and E. coli Hsp70 (DnaK) and their respective linker switch mutants we investigated self-association of the chaperones using surface plasmon resonance (SPR) analysis. The effect of the changes on client selectivity was investigated on DnaK and its mutant through co-affinity chromatography coupled to LC-MS analysis. Our findings demonstrated that the linker is important for both Hsp70 self-association and client binding.

Effective degradation of recalcitrant naphthenic acids by the Fe(III)/peroxymonosulfate oxidation enhanced by molybdenum disulfide: Degradation performance and mechanisms

In this study, molybdenum disulfide (MoS2) has been investigated as a catalyst to boost the redox cycle of Fe(III)/Fe(II) to activate peroxymonosulfate (PMS) to effectively break down cyclohexanecarboxylic acid (CHA), which is a model naphthenic acid (NA) pollutant. The optimum conditions of pH 3, MoS2 concentration of 0.4 g/L, Fe(III) concentration of 0.3 mmol/L, and PMS concentration of 2 mmol/L has been applied for complete degradation of 0.1 mmol/L CHA in 10 minutes reaction time. Based on results of electron paramagnetic resonance analysis, chemical probe and quenching experiment, it was found that all of •OH, SO4•−, 1O2, and Fe(IV) contributed to the MoS2/Fe(III)/PMS oxidation system. Eighteen CHA byproducts and three primary CHA degradation pathways were revealed according to the results of UHPLC-QTOF-MS analysis. By using XPS, SEM, and XRD to characterize the MoS2 powders before and after the reaction, MoS2 was found with high stability and the oxidation of Mo(IV) on the surface was negligible. The impacts of background anions on CHA degradation were found to be nonimportant, and commercial NAs mixture were verified to be efficiently degraded in current system. Overall results indicate the capacity and potential of MoS2/Fe(III)/PMS system to be utilized for future treatment of authentic oil and gas field wastewater.

Quantifying aortic valve regurgitation in patients with congenital aortic valve disease by 2D and 4D flow magnetic resonance analysis

BackgroundIn congenital aortic valve disease, quantifying aortic regurgitation (AR) varies by the measurement site. Our study aimed to identify the optimal site for AR assessment using 2D and 4D MR flow measurements, with a focus on vortices. MethodsWe retrospectively analysed 31 patients with congenital aortic valve disease, performing 2D and 4D MR flow measurements at the aortic valve, sinotubular junction (STJ), ascending aorta (AAo), and using midpulmonary artery measurements as a reference.We assessed percentage AR and net forward volumes, calculated linear correlations, and plotted Bland-Altman plots. Net forward flow at all aortic sites were correlated with the main pulmonary artery. Differences in AR between 2D and 4D flows were linked to vortices detected by 4D streamlines. ResultsThe best agreement in % AR between 2D and 4D flows was at the aortic valve (mean difference 4D2D -2.9%, limits of agreement 8.7% to −14.3%; r2 = 0.7). Correlations weakened at STJ and AAo. Vortices in the ascending aorta led to AR overestimation in 2D measurements. Net forward flow at the aortic valve by 4D flow correlated closer with main pulmonary artery than did 2D flow. (Mean difference for 2D and 4D MR flow 7.5 ml and 4.2 ml, respectively). ConclusionsFor congenital aortic valve disease, the most accurate AR quantification occurs at the aortic valve using 2D and 4D MR flow. Notably, vortices in the ascending aorta can result in AR overestimation with 2D MR flow.

Entangled in complexity: An ethnographic study of organizational adaptability and safe care transitions for patients with complex care needs.

The aim of this study was to visualize vulnerabilities and explore the dynamics of inter-professional collaboration and organizational adaptability in the context of care transitions for patients with complex care needs. An ethnographic design using multiple convergent data collection techniques. Data collection involved document review, participant observations and interviews with healthcare and social care professionals (HSCPs). Narrative analysis was employed to construct two illustrative patient scenarios, which were then examined using the Functional Resonance Analysis Method (FRAM). Thematic analysis was subsequently applied to synthesize the findings. Inconsistencies in timing and precision during care transitions pose risks for patients with complex care needs as they force healthcare systems to prioritize structural constraints over individualized care, especially during unforeseen events outside regular hours. Such systemic inflexibility can compromise patient safety, increase the workload for HSCPs and strain resources. Organizational adaptability is crucial to managing the inherent variability of patient needs. Our proposed 'safe care transition pathway' addresses these issues, providing proactive strategies such as sharing knowledge and increasing patient participation, and strengthening the capacity of professionals to meet dynamic care needs, promoting safer care transitions. To promote patient safety in care transitions, strategies must go beyond inter-professional collaboration, incorporating adaptability and flexible resource planning. The implementation of standardized safe care transition pathways, coupled with the active participation of patients and families, is crucial. These measures aim to create a resilient, person-centred approach that may effectively manage the complexities in care transitions. The recommendations of this study span the spectrum from policy-level changes aimed at strategic resource allocation and fostering inter-professional collaboration to practical measures like effective communication, information technology integration, patient participation and family involvement. Together, the recommendations offer a holistic approach to enhance care transitions and, ultimately, patient outcomes. Findings are reported per the Consolidated Criteria for Reporting Qualitative research (COREQ). No patient or public contribution.

Zeolitic imidazolate framework derived Fe catalyst electrocatalytic-driven atomic hydrogen for efficient reduction of nitrate to N2

Excessive discharge of nitrogen-containing chemical products into the natural water environment leads to the serious environmental problem of nitrate-nitrogen pollution, threatening the ecological balance and human health. In this study, we propose an efficient denitrification electrochemical method utilizing iron-doped zeolite imidazolium framework derived defective nitrogen-doped carbon (d-FeNC) catalysts. The d-FeNC catalyst exhibited 97 % nitrate removal efficiency and 94 % total nitrogen (TN) removal, and the reaction rate constant was increased from 0.73 h−1 of the Fe-undoped electrocatalyst (d-NC) to 1.11 h−1. The successful synthesis of d-FeNC with carbon defect sites and encapsulated Fe was confirmed by in-depth characterization. In situ electron paramagnetic resonance (EPR) analysis in conjunction with cyclic voltammetry (CV) tests confirmed the carbon substrates with defect enhanced the trapping of atomic hydrogen (H*) on the catalyst surface. Density functional theory (DFT) calculations clarified the doping of Fe facilitated the adsorption of nitrate, resulting in contact of H* with nitrate on the catalyst surface. In the synergy of the defective state organic framework and metal Fe, H* and nitrate realized a collision process. The electrochemical denitrification system achieved an excellent nitrate removal capacity of 7587 mgN·g−1cat in high-concentration nitrate solution and showed excellent stability under various conditions. Overall, this study underscores the potential of defective iron-doped carbon catalysts for efficient electrocatalytic denitrification, providing a promising approach for sustainable wastewater treatment.

Gingerenone A Attenuates Ulcerative Colitis via Targeting IL-17RA to Inhibit Inflammation and Restore Intestinal Barrier Function.

Ulcerative colitis (UC) is a complicated and recurrent intestinal disease. Currently available drugs for UC treatment are scarce, therefore, novel therapeutic drugs for the UC are urgently to be developed. Gingerenone A (GA) is a phenolic compound known for its anti-inflammatory effect, but its effect on UC remains unknown. Here, it is shown that GA protects mice against UC, which is closely associated with inhibiting intestinal mucosal inflammation and enhancing intestinal barrier integrity in vivo and in vitro. Of note, RNA sequencing analysis demonstrates an evident correlation with IL-17 signaling pathway after GA treatment, and this effect is further corroborated by Western blot. Mechanistically, GA directly interacts with IL-17RA protein through pull-down, surface plasmon resonance analysis and molecular dynamics simulation. Importantly, lentivirus-mediated IL-17RA/Act1 knock-down or GA co-treatment with brodalumab/ixekizumab significantly impairs the protective effects of GA against DSS-induced inflammation and barrier dysfunction, suggesting a critical role of IL-17RA signaling for GA-mediated protection against UC. Overall, these results indicate that GA is an effective agent against UC mainly through the direct binding of IL-17RA to inhibit inflammatory signaling activation.

Understanding the pivotal role of ubiquitous Yellow River suspend sediment in efficiently degrading metronidazole pollutants in water environments

Sulfite-based advanced oxidation technology has received considerable attention for its application in organic pollutants elimination. However, the potential of natural sediments as effective catalysts for sulfite activation has been overlooked. This study investigates a novel process utilizing suspended sediment/sulfite (SS/S(IV)) for degradation of metronidazole (MNZ). Our results demonstrate that MNZ degradation efficiency can reach to 93.1 % within 90 min with 12.0 g SS and 2.0 mM sulfite. The influencing environmental factors, including initial pH, SS dosage, S(IV) concentration, temperature, and co-existing substances were systematically investigated. Quenching experiments and electron paramagnetic resonance analyses results indicate that SO3•− is the primary active substance responsible for MNZ degradation, with involvement of SO4•−, SO5•−, and •OH. X-ray photoelectron spectroscopy and Mössbauer spectra reveal that Fe (III)-silicates play a crucial role in activating S(IV). Furthermore, analysis of degradation intermediates and pathways of MNZ is conducted using liquid chromatography with mass spectrometry (LC -MS). The toxicity of MNZ and its intermediates were also systematically evaluated by the T.E.ST. program and wheat seeds germination test. This study offers valuable insight into the activation of sulfite by natural sediments and could contribute to the development of SS-based advanced oxidation processes (AOPs) for the in-situ remediation of antibiotics-contaminated water environments.

Defining the mechanism of galectin-3–mediated TGF-β1 activation and its role in lung fibrosis

Integrin-mediated activation of the pro-fibrotic mediator transforming growth factor-β1 (TGF-β1), plays a critical role in idiopathic pulmonary fibrosis (IPF) pathogenesis. Galectin-3 is believed to contribute to the pathological wound healing seen in IPF, although its mechanism of action is not precisely defined. We hypothesised that galectin-3 potentiates TGF-β1 activation and/or signaling in the lung to promote fibrogenesis. We show that galectin-3 induces TGF-β1 activation in human lung fibroblasts (HLFs) and specifically that extracellular galectin-3 promotes oleoyl-L-α-lysophosphatidic acid sodium salt (LPA)-induced integrin-mediated TGF-β1 activation. Surface plasmon resonance (SPR) analysis confirmed that galectin-3 binds to αv integrins, αvβ1, αvβ5 and αvβ6 and to the TGFβRII subunit in a glycosylation-dependent manner. This binding is heterogeneous and not a 1:1 binding stoichiometry. Binding interactions were blocked by small molecule inhibitors of galectin-3 which target the carbohydrate recognition domain. Galectin-3 binding to β1 integrin was validated in vitro by co-immunoprecipitation in HLFs. Proximity ligation assays indicated galectin-3 and β1 integrin colocalize closely (≤40 nm) on the cell surface, that colocalization is increased by TGF-β1 treatment and blocked by galectin-3 inhibitors. In the absence of TGF-β1 stimulation, colocalization was detectable only in HLFs from IPF patients suggesting the proteins are inherently more closely associated in the disease state. Galectin-3 inhibitor treatment of precision cut lung slices from IPF patients reduced Col1a1, TIMP1 and HA secretion to a similar degree as TGF-β type I receptor inhibitor. These data suggest galectin-3 promotes TGF-β1 signaling and may induce fibrogenesis by interacting directly with components of the TGF-β1 signaling cascade.

Structural characterization and anti-inflammatory activities of a purified polysaccharide from fruits remnants of Alpinia zerumbet (Pers.) Burtt. et Smith

We reported here an interesting source of Alpinia zerumbet Polysaccharides (named AZPs) from the residues after extracting essential oil by steam distillation from Alpinia zerumbet fructus. After a series of purifications, a homogeneous polysaccharide (AZP-2) of molecular weight 1.25 × 105 Da was obtained. Structure, anti-inflammatory activity, and anti-inflammatory mechanism were investigated. AZP-2 was mainly composed of galactose, arabinose, xylopyranose, glucose, and galacturonic acid. The main linkage structure of AZP-2 was determined after integrating the nuclear magnetic resonance (NMR) and methylation analysis, and the structure was comparatively complex. The results indicated that AZP-2 significantly decreased the production of NO and ROS in the inflammatory model established by lipopolysaccharide (LPS) stimulated RAW264.7, particularly at the concentration of 200 μg/mL. Furthermore, AZP-2 significantly modulated the secretion of both pro-inflammatory and anti-inflammatory cytokines. Notably, the mechanism of AZP-2 exhibiting inhibitory effects was related to regulating the NF-κB signaling pathway. Overall, AZP-2 could be used as a potential anti-inflammatory agent for further in-depth studies.

Facet and dual vacancy engineering-boosting BiOBr for enhanced CO2 and epoxide cycloaddition reaction under mild and cocatalyst-free conditions: Double substrate active sites and activated surface bromine ions synergy

Among the many strategies for CO2 resource utilization, the synthetic technology of cyclic carbonates with 100 % atom economy through CO2and epoxide is one of the most industrially viable routes, but its efficiency has been severely hampered by the lack of highly active catalytic sites. Moreover, due to the intrinsic thermodynamic stability and kinetic inertia of CO2 and the higher energy barrier of the ring-opening reaction of epoxides, the heterogeneous catalytic conversion of CO2 highly depends on harsh operating conditions, high temperatures and pressures, and the incorporation of cocatalysts. The development of efficient heterogeneous catalysts for CO2 conversion under cocatalyst-free and mild conditions has always been a challenge. Herein, we have proposed a synergetic strategy of facet and vacancy engineering for the construction of highly efficient heterogeneous catalyst BiO1-xBr1-y-(010) for CO2 cycloaddition, where introducing the OVs-BrVs pairs into typical (010) facets BiOBr with simultaneous surface Lewis acid sites Bi3+ and nucleophilic sites Br−. By combining theoretical calculations and a series of systematic experiments, such as CO2 temperature-programmed desorption, electron paramagnetic resonance and fluorescence probe analysis experiments, the introduced OVs-BrVs pair can not only form Bi3+-Bi(3-x)+ dual active sites on the surface, which activate PO and CO2 respectively to reduce the energy barrier of CO2 insertion, but also activate Br− near BrVs to enhance their nucleophilic attacking ability and reduce the energy barrier of epoxides ring-opening. As a result, the BiO1-xBr1-y-(010) with abundant surface OVs-BrVs pairs showed a high cyclic carbonates conversion of 99 % with 100 % selectivity under cocatalyst-free and mild conditions, far surpassing most heterogeneous catalytic systems. This work provides a completely new strategy to construct high-performance heterogeneous CO2 cycloaddition catalysts through a simple facet and vacancy engineering strategy to overcome the harsh operating conditions limitation and the use of cocatalysts.

The Effects of Four Different Thawing Methods on Quality Indicators of Amphioctopus neglectus.

Amphioctopus neglectus is a species of octopus that is favored by consumers due to its rich nutrient profile. To investigate the influence of different thawing methods on the quality of octopus meat, we employed four distinct thawing methods: air thawing (AT), hydrostatic thawing (HT), flowing water thawing (FWT), and microwave thawing (MT). We then explored the differences in texture, color, water retention, pH, total volatile basic nitrogen (TVB-N), total sulfhydryl content, Ca2+-ATPase activity, and myofibrillar protein, among other quality indicators in response to these methods, and used a low-field nuclear magnetic resonance analyzer to assess the water migration that occurred during the thawing process. The results revealed that AT had the longest thawing time, leading to oxidation-induced protein denaturation, myofibrillar protein damage, and a significant decrease in water retention. Additionally, when this method was utilized, the content of TVB-N was significantly higher than in the other three groups. HT, to a certain extent, isolated the oxygen in the meat and thus alleviated protein oxidation, allowing higher levels of Ca2+-ATPase activity, sulfhydryl content, and springiness to be maintained. However, HT had a longer duration: 2.95 times that of FWT, resulting in a 9.84% higher cooking loss and a 28.21% higher TVB-N content compared to FWT. MT had the shortest thawing time, yielding the lowest content of TVB-N. However, uneven heating and in some cases overcooking occurred, severely damaging the protein structure, with a concurrent increase in thawing loss, W value, hardness, and shear force. Meanwhile, FWT improved the L*, W* and b* values of octopus meat, enhancing its color and water retention. The myofibrillar protein (MP) concentration was also the highest after FWT, with clearer subunit bands in SDS-PAGE electrophoresis, indicating that less degradation occurred and allowing greater springiness, increased Ca2+-ATPase activity, and a higher sulfhydryl content to be maintained. This suggests that FWT has an inhibitory effect on oxidation, alleviating protein oxidation degradation and preserving the quality of the meat. In conclusion, FWT outperformed the other three thawing methods, effectively minimizing adverse changes during thawing and successfully maintaining the quality of octopus meat.