Reduction Pathway Research Articles

High-Efficiency NO conversion via In-Situ grown covalent organic framework on g-C3N4 nanosheets with Single-Atom platinum photocatalyst

This study presents a chemically bonded Pt/TP-BPY-CN/g-C3N4 composite photocatalyst created through an in-situ growth method via Schiff base reaction between g-C3N4 and aldehyde-functionalized TP-BPY-COF. The −H-C-N-H- bonds formed at the g-C3N4 and TP-BPY-COF interface significantly boost electron communication, thereby substantially enhancing transfer efficiency between these two constituents. Besides, single-atom platinum incorporation via coordination establishes a Pt2+/Pt4+ redox cycle, aiding both oxidation and reduction of nitric oxide (NO). Consequently, the Pt/40TPBPY-CN composite achieves 65.3 % NO conversion, with almost 100 % oxidation selectivity towards NO3–. In-situ XPS analysis confirms the robust electron communication between TP-BPY-COF and g-C3N4 facilitated by −H-C-N-H- bonds, and the redox transformation between Pt2+ and Pt4+. In addition, DFT calculation provides a deeper insight into photocatalytic oxidation and reduction pathways, confirming an inhibition of N2 desorption. This research underscores the benefits of chemically bonded heterostructures for improved electronic interactions and highlights the efficacy of bifunctional single-atom platinum in photocatalysis.

Self-assembled S-scheme In2.77S4/K+-doped g-C3N4 photocatalyst with selective O2 reduction pathway for efficient H2O2 production using water and air

Self-assembled S-scheme In2.77S4/K+-doped g-C3N4 photocatalyst with selective O2 reduction pathway for efficient H2O2 production using water and air

A novel pathway for sustained sulfides conversion via electrocatalyst-modified separator in lithium-sulfur batteries

Electrocatalysts for boosting the conversion reactions of sulfur (S) have attracted increasing interest in achieving high S utilization and reaction kinetics in lithium-sulfur (Li-S) batteries. However, electrocatalysts may undergo complex changes in electrochemical conditions, especially for the liquid-solid conversion reactions, leading to an unsustainable electrocatalytic effect. Here, we present a functional separator modified with flower-like molybdenum sulfides grown on carbon nanofibers and reveal its real functional state and catalytic mechanism. The in-situ generated Mo2S3/MoS2@CNFs composite on the separator can enhance electron transfer between sulfur species and molybdenum sulfides, improving sulfur reduction kinetics. In addition, the highly electrochemical reactive Mo2S3 located on the separator effectively avoids being covered by insulating sulfides, and provides a new reduction pathway for dissolved polysulfides, which significantly improve sulfur utilization and catalyst durability. As a result, the Li-S battery using MoS2@CNFs@PP separator achieved an areal capacity of 5.8 mAh cm−2 at high sulfur loading (∼4.5 mgs cm−2) and demonstrated stable long cycling performance at 1 C. This work provides valuable guidance for maintaining catalyst activity in lithium-sulfur batteries via in situ reconstruction of electrocatalysts.

Carbon Reduction Pathways for Chinese Provinces: Considering Carbon Intensity Convergence, Regional Development Plans, and Shared Socioeconomic Pathways

Carbon Reduction Pathways for Chinese Provinces: Considering Carbon Intensity Convergence, Regional Development Plans, and Shared Socioeconomic Pathways

Reaction pathway, mechanism and kinetics of thermochemical sulfate reduction: insights from in situ Raman spectroscopic observations at elevated temperatures and pressures

In Earth’s crust, thermochemical sulfate reduction (TSR) is a common organic–inorganic interaction, which is in close association with the carbon cycle in sedimentary basins and metal sulfide precipitation in Mississippi Valley-type deposits. However, the reaction pathway and mechanism of TSR need further investigation, mainly due to the complex sulfur species involved in this reaction. Here we applied in situ Raman spectroscopy to disclose the stepwise transformation from sulfate to sulfide and the reaction kinetics in the CH4-Na2SO4/MgSO4/H2SO4-H2O systems at elevated temperatures and pressures. Our results indicate that sulfate is transformed to H2S through a series of reduction and disproportionation reactions. Once dissolved H2S reaches a certain concentration, it reacts with sulfate to form intermediate valence sulfur species (S0 and S3−), which quickly oxidize methane to generate CO2 and H2S. The formation of S3− and S0 is responsible for the autocatalytic effect in TSR. The sulfur speciation significantly affects the reaction kinetics, which could be divided into three stages based on the in situ observations. Extrapolated kinetic data show that TSR could proceed fast under the catalysis of H2S, and the half-life of methane is ∼7.10 million years at 200 °C. Subsequent numerical modeling strongly supports that in situ sulfate reduction could provide sufficient reduced sulfur for the formation of giant Mississippi Valley-type deposits, thus serving as an efficient mineralizing mechanism.

Tree-inspired semiconductor-on-ceramic 2D/1D heterostructure for efficient CO2 photoreduction

Two-dimension nanosheets are ideal photocatalysts for CO2 reduction due to their high exposure of active sites and short charge transfer pathway. However, 2D photocatalysts have a tendency to agglomeration, thus compromising the performance of photocatalytic CO2 reduction. Trees, one of the most important plants for photosynthesis, have a unique “leaf-on-branch” structure. This unique two-dimension/one-dimension (2D/1D) configuration maximizes the adsorption of CO2 molecules and light harvesting. Herein, a tree-inspired semiconductor-on-ceramic 2D/1D heterostructure for efficient photocatalytic CO2 reduction is reported. The cobalt silicate (CoSi) nanosheets (∼0.68 nm) are in situ grown on the surfaces of hydroxyapatite (HAP) nanowires, creating a well-defined 2D/1D hierarchical structure. The vertical alignment of ultrathin CoSi nanosheets on the HAP nanowires effectively suppresses their agglomeration, leading to a large BET surface area (106.45 m2/g) and excellent CO2 adsorption (8.00 cm3 g−1). The results of photoelectrochemical characterization demonstrate that the 2D/1D hierarchical structure is powerful to expedite charge transfer. As a result, the gas generation rate of CO is as high as 28780 μmol g−1 h−1 over the CoSi-on-HAP 2D/1D heterostructure. In addition, the electron transfer mechanism and reaction pathways of CO2 reduction are revealed by in situ irradiated XPS and in situ DRIFT spectra.

Electrolyte Composition-Dependent Product Selectivity in CO2 Reduction with a Porphyrinic Metal-Organic Framework Catalyst.

A copper porphyrin-derived metal-organic framework electrocatalyst, FICN-8, was synthesized and its catalytic activity for CO2 reduction reaction (CO2RR) was investigated. FICN-8 selectively catalyzed electrochemical reduction of CO2 to CO in anhydrous acetonitrile electrolyte. However, formic acid became the dominant CO2RR product with the addition of a proton source to the system. Mechanistic studies revealed the change of major reduction pathway upon proton source addition, while catalyst-bound hydride (*H) species was proposed as the key intermediate for formic acid production. This work highlights the importance of electrolyte composition on CO2RR product selectivity.

Promoting Proton Donation through Hydrogen Bond Breaking on Carbon Nitride for Enhanced H2O2 Photosynthesis.

Photocatalytic H2O2 production has attracted much attention as an alternative way to the industrial anthraquinone oxidation process but is limited by the weak interaction between the catalysts and reactants as well as inefficient proton transfer. Herein, we report on a hydrogen-bond-broken strategy in carbon nitride for the enhancement of H2O2 photosynthesis without any sacrificial agent. The H2O2 photosynthesis is promoted by the hydrogen bond formation between the exposed N atoms on hydrogen-bond-broken carbon nitride and H2O molecules, which enhances proton-coupled electron transfer and therefore the photocatalytic activity. The exposed N atoms serve as proton buffering sites for the proton transfer from H2O molecules to carbon nitride. The H2O2 photosynthesis is also enhanced through the enhanced adsorption and reduction of O2 gas toward H2O2 on hydrogen-bond-broken carbon nitride because of the formation of nitrogen vacancies (NVs) and cyano groups after the intralayer hydrogen bond breaking on carbon nitride. A high light-to-chemical conversion efficiency (LCCE) value of 3.85% is achieved. O2 and H2O molecules are found to undergo a one-step two-electron reduction pathway by photogenerated hot electrons and a four-electron oxidation process to produce O2 gas, respectively. Density functional theory (DFT) calculations validate the O2 adsorption and reaction pathways. This study elucidates the significance of the hydrogen bond formation between the catalyst and reactants, which greatly increases the proton tunneling dynamics.

Revisiting the Electrocatalyst Role on Lignin Depolymerization

Replacing fossil resources as the primary source of carbon‐based chemicals by alternative feedstocks, while implementing more sustainable production routes, has become imperative for environmental and resource sustainability. In this context, lignin, often treated as a biomass waste, emerges as an appealing candidate, considering the principles of circular economy. For this pursuit, depolymerization methods offer potential strategies to harness lignin to produce valuable organic chemicals, while electrocatalysis processes stand out especially in the context of sustainability, as they can be powered by electricity from renewable sources. This minireview article explores the pivotal role of various electrocatalysts in lignin depolymerization, investigating both oxidative and reductive pathways. Emphasizing recent advancements, the review delves into the diverse nature of electrocatalysts and their influence on lignin valorization. Highlighting current trends, the discussion encompasses the catalytic mechanisms and selectivity of electrochemical processes employed for lignin breakdown. Additionally, some insights into emerging technologies are also offered, emphasizing the need for sustainable and efficient strategies. By providing an overview of the field, this minireview aims to guide future research endeavors toward innovative electrocatalytic approaches for lignin depolymerization, paving the way for sustainable biorefinery processes.

Exploring the Complex Chemistry and Degradation of Ascorbic Acid in Aqueous Nanoparticle Synthesis.

Ascorbic acid (AA) is the most widely used reductant for noble metal nanoparticle (NP) synthesis. Despite the synthetic relevance, its aqueous chemistry remains misunderstood, due in part to various assumptions about its reduction pathway which are insufficiently supported by experimental evidence. This study aims to provide an understanding of the complex chemistry associated with AA under aqueous conditions. We demonstrate that (i) AA undergoes appreciable degradation in alkaline solution on a timescale relevant to NP synthesis, (ii) contrary to popular belief, AA does not degrade into dehydroascorbic acid (DHA), nor is DHA the oxidized product of AA under noble metal NP synthetic conditions, (iii) DHA, which readily degrades under alkaline conditions, can also effectively reduce metal salt precursors to metal NPs, (iv) neither ascorbate nor dehydroascorbate act as surface capping agents post-synthetically on the NPs (v) AA degradation time greatly affects the morphology and polydispersity of the resultant NP. Results from our mechanistic investigation enabled us to utilize purposefully-aged reductants to achieve control over shape yield and monodispersity in the seed-mediated synthesis of Au nanorods. Our findings have important implications for achieving monodispersed products in the many metal NP synthesis reactions that make use of AA as a reducing agent.

Efficient selenate removal from impaired waters with TiO2-assisted electrocatalysis

Aquatic selenium (Se) oxyanions have profound ecosystem and human health impacts, necessitating their conversion and immobilization into elemental Se(0) to mitigate the aquatic Se pollution. While thermodynamically favorable, this transformation encounters kinetic limitations, especially for selenate (SeO42−) or Se(VI). To lower the activation barrier, we investigated the electrocatalytic Se(VI) transformation using five affordable catalysts on graphite cathodes, including TiO2, underpotentially deposited Cu (UPD Cu), underpotentially deposited Cd (UPD Cd), Co, and CuFe. Among these five catalysts, we identified characteristic Se(VI) reduction peaks for TiO2 through cyclic voltammetry. Other catalysts removed less than 5% of 1-mM Se(VI) in 24-h chronoamperometry tests while leaching ppm-level metal cations in the treated water. In contrast, TiO2 as the electrocatalyst could remove more than 80% of 1-mM Se(VI) with negligible catalyst dissolution. Mechanistic investigations revealed a six-electron Se(VI)/Se(0) reduction pathway at -0.30 V (vs. Ag/AgCl), resulting in red Se(0) deposits on the TiO2-coated graphite cathode. Further potential decrease to more negative than -0.45 V led to Se(-II) formation, triggering cathodic Se(0) dissolution and surface regeneration. Electrochemical impedance spectroscopy indicated that Se(VI) reduction was optimal with a moderate TiO2 loading of 0.55 mg cm−2 and acidic environments (pH=1.0∼2.5), achieving an optimized removal of 88.7 ± 2.3% under -0.70 V and an energy input of 3.6 kWh kg−1 Se. These findings lay the foundation for efficient selenate removal from impaired waters. Future efforts should evaluate catalyst performance over time and refine electrode and reactor designs to improve efficiency.

Exploring the Complex Chemistry and Degradation of Ascorbic Acid in Aqueous Nanoparticle Synthesis

Ascorbic acid (AA) is the most widely used reductant for noble metal nanoparticle (NP) synthesis. Despite the synthetic relevance, its aqueous chemistry remains misunderstood, due in part to various assumptions about its reduction pathway which are insufficiently supported by experimental evidence. This study aims to provide an understanding of the complex chemistry associated with AA under aqueous conditions. We demonstrate that (i) AA undergoes appreciable degradation in alkaline solution on a timescale relevant to NP synthesis, (ii) contrary to popular belief, AA does not degrade into dehydroascorbic acid (DHA), nor is DHA the oxidized product of AA under noble metal NP synthetic conditions, (iii) DHA, which readily degrades under alkaline conditions, can also effectively reduce metal salt precursors to metal NPs, (iv) neither ascorbate nor dehydroascorbate act as surface capping agents post‐synthetically on the NPs (v) AA degradation time greatly affects the morphology and polydispersity of the resultant NP. Results from our mechanistic investigation enabled us to utilize purposefully‐aged reductants to achieve control over shape yield and monodispersity in the seed‐mediated synthesis of Au nanorods. Our findings have important implications for achieving monodispersed products in the many metal NP synthesis reactions that make use of AA as a reducing agent.

Revealing the delithiation process of spent LiMn2O4 and LiNi0.6Co0.2Mn0.2O2 batteries during the biomass-assisted gasthermal and carbothermal reduction

The utilization of biomass-assisted pyrolysis in the recycling of spent lithium-ion batteries has emerged as a promising and reliable process. This article furnishes theoretical underpinnings and analytical insights into this method, showcasing sawdust pyrolysis reduction as an efficient means to recycle spent LiMn2O4 and LiNi0.6Co0.2Mn0.2O2 batteries. Through advanced thermogravimetry-gas chromatography-mass spectrometry analysis complemented by traditional thermodynamic demonstration, the synergistic effects of biomass pyrolysis reduction are elucidated, with minor autodecomposition and major carbothermal and gasthermal reduction pathways identified. The controlled manipulation of transition metals has demonstrated the capability to modulate surface pyrolysis gas catalytic reactions and facilitate the preparation of composite materials with diverse morphologies. Optimization of process conditions has culminated in recovery efficiency exceeding 99.0 % for LiMn2O4 and 99.5 % for LiNi0.6Co0.2Mn0.2O2. Economic and environmental analyses underscore the advantages of biomass reduction and recycling for these two types of spent LIBs: low energy consumption, environmental compatibility, and high economic viability.

Electron bifurcation and fluoride efflux systems implicated in defluorination of perfluorinated unsaturated carboxylic acids by Acetobacterium spp.

Enzymatic cleavage of C─F bonds in per- and polyfluoroalkyl substances (PFAS) is largely unknown but avidly sought to promote systems biology for PFAS bioremediation. Here, we report the reductive defluorination of α, β-unsaturated per- and polyfluorocarboxylic acids by Acetobacterium spp. The microbial defluorination products were structurally confirmed and showed regiospecificity and stereospecificity, consistent with their formation by enzymatic reactions. A comparison of defluorination activities among several Acetobacterium species indicated that a functional fluoride exporter was required for the detoxification of the released fluoride. Results from both in vivo inhibition tests and in silico enzyme modeling suggested the involvement of enzymes of the flavin-based electron-bifurcating caffeate reduction pathway [caffeoyl-CoA reductase (CarABCDE)] in the reductive defluorination. This is a report on specific microorganisms carrying out enzymatic reductive defluorination of PFAS, which could be linked to electron-bifurcating reductases that are environmentally widespread.

Mechanochemistry in Organic Synthesis: An Italian Journey through Innovations

AbstractMechanochemistry, as an enabling technology, harnesses mechanical force to drive chemical reactions, presenting compelling advantages in organic synthesis within the principles of green chemistry. This review explores how its unique advantages and alignment with sustainable practices have been widely developed in different scientific fields in Italy. As a transformative strategy for organic synthesis, mechanochemistry has been portrayed in this review as a valuable synthetic alternative due to the various advantages, such as solvent reduction and new reaction pathways, that its use brings. Nonetheless, the improvements brought about by its use have also been crucial in other fields of chemistry described by Italian scientists. In this whole context, Italian researchers have analysed both already optimised processes and new feasible pathways, paving the way for new avenues previously hampered by all the limitations that belong to in‐solution chemistry.

Assessing Transition Pathways of Hydrogen Production in China with a Probabilistic Framework.

The transition of China's hydrogen production system to meeting carbon neutrality is considerably uncertain. This study uses a probabilistic framework to assess the transition pathways of hydrogen production in China to meet the goal of carbon neutrality and reveals the key technology selection mechanism. Three strategies for hydrogen production transition were considered: delayed, orderly, and radical, corresponding to the green hydrogen shares between 70 and 95% in 2060. More ambitious strategies tended to result in greater uncertainty of green hydrogen production and introduce higher system costs and cost uncertainty. The different strategies showed notable differences in carbon dioxide (CO2) reduction pathways. The cumulative CO2 emissions of the delayed strategy may reach 3 times that of the radical strategy, and the CO2 reduction uncertainty of the orderly strategy may be twice that of the other strategies. Alkaline electrolyzers were predicted to dominate green hydrogen production until being surpassed by proton exchange membrane electrolyzers (PEM) after 2060. The synergy of the solar-energy storage-PEM technology combination was notable because expensive electrolyzers tended to increase utilization, thereby diluting fixed costs. Our results underscore the importance of studying the impact of uncertainty and technology selection mechanisms on transition pathways.

Near UV and Visible Light-Induced Degradation of Bovine Serum Albumin and a Monoclonal Antibody Mediated by Citrate Buffer and Fe(III): Reduction vs Oxidation Pathways.

Light exposure during manufacturing, storage, and administration can lead to the photodegradation of therapeutic proteins. This photodegradation can be promoted by pharmaceutical buffers or impurities. Our laboratory has previously demonstrated that citrate-Fe(III) complexes generate the •CO2- radical anion when photoirradiated under near UV (λ = 320-400 nm) and visible light (λ = 400-800 nm) [Subelzu, N.; Schöneich, C. Mol. Pharmaceutics 2020, 17 (11), 4163-4179; Zhang, Y. Mol. Pharmaceutics 2022, 19 (11), 4026-4042]. Here, we evaluated the impact of citrate-Fe(III) on the photostability and degradation mechanisms of disulfide-containing proteins (bovine serum albumin (BSA) and NISTmAb) under pharmaceutically relevant conditions. We monitored and localized competitive disulfide reduction and protein oxidation by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) analysis depending on the reaction conditions. These competitive pathways were affected by multiple factors, including light dose, Fe(III) concentration, protein concentration, the presence of oxygen, and light intensity.

Regulation of oxidative stress response and antioxidant modification in Corynebacterium glutamicum.

As an efficient and safe industrial bacterium, Corynebacterium glutamicum has extensive application in amino acid production. However, it often faces oxidative stress induced by reactive oxygen species (ROS), leading to diminished production efficiency. To enhance the robustness of C. glutamicum, numerous studies have focused on elucidating its regulatory mechanisms under various stress conditions such as heat, acid, and sulfur stress. However, a comprehensive review of its defense mechanisms against oxidative stress is needed. This review offers an in-depth overview of the mechanisms C. glutamicum employs to manage oxidative stress. It covers both enzymatic and non-enzymatic systems, including antioxidant enzymes, regulatory protein families, sigma factors involved in transcription, and physiological redox reduction pathways. This review provides insights for advancing research on the antioxidant mechanisms of C. glutamicum and sheds light on its potential applications in industrial production.

V2O3/VN electrocatalysts with coherent heterogeneous interfaces for selecting low‐energy nitrogen reduction pathways

AbstractElectrochemical nitrogen reduction reaction (NRR) is a sustainable alternative to the Haber‒Bosch process for ammonia (NH3) production. However, the significant uphill energy in the multistep NRR pathway is a bottleneck for favorable serial reactions. To overcome this challenge, we designed a vanadium oxide/nitride (V2O3/VN) hybrid electrocatalyst in which V2O3 and VN coexist coherently at the heterogeneous interface. Since single‐phase V2O3 and VN exhibit different surface catalytic kinetics for NRR, the V2O3/VN hybrid electrocatalyst can provide alternating reaction pathways, selecting a lower energy pathway for each material in the serial NRR pathway. As a result, the ammonia yield of the V2O3/VN hybrid electrocatalyst was 219.6 µg h−1 cm−2, and the Faradaic efficiency was 18.9%, which is much higher than that of single‐phase VN, V2O3, and VNxOy solid solution catalysts without heterointerfaces. Density functional theory calculations confirmed that the composition of these hybrid electrocatalysts allows NRR to proceed from a multistep reduction reaction to a low‐energy reaction pathway through the migration and adsorption of intermediate species. Therefore, the design of metal oxide/nitride hybrids with coherent heterointerfaces provides a novel strategy for synthesizing highly efficient electrochemical catalysts that induce steps favorable for the efficient low‐energy progression of NRR.

Effects of Heat-Treated Lactobacillus helveticus CP790-Fermented Milk on Gastrointestinal Health in Healthy Adults: A Randomized Double-Blind Placebo-Controlled Trial.

Probiotic-fermented milk is commonly used to maintain intestinal health. However, the effects of heat-treated fermented milk, which does not contain live microorganisms, on intestinal function are not yet fully understood. This study aimed to investigate whether heat-treated Lactobacillus helveticus CP790-fermented milk affects fecal microbiota and gut health as a "postbiotic". A randomized, double-blind, placebo-controlled trial was conducted in healthy Japanese individuals aged 20-59 years with a tendency toward constipation. Participants consumed 100 mL of either the test beverage (n = 60) or placebo beverage (n = 60) for four weeks. The test beverages were prepared with heat-treated CP790-fermented milk, while the placebo beverages were prepared with nonfermented milk flavored with lactic acid. Fecal samples were analyzed using 16S rRNA gene sequencing. Constipation symptoms were assessed using defecation logs and the Patient Assessment of Constipation Symptoms (PAC-SYM) questionnaire. Mood state was also assessed using the Profile of Mood States 2 (POMS2) questionnaire to explore its potential as a "psychobiotic". Desulfobacterota were significantly decreased by CP790-fermented milk intake. PICRUSt2 analysis predicted a decrease in the proportion of genes involved in the sulfate reduction pathway following the consumption of CP790-fermented milk. The CP790-fermented milk intervention significantly improved stool consistency and straining during defecation. These improvements were correlated with a decrease in Desulfobacterota. After the intervention, overall mood, expressed as total mood disturbance, and depression-dejection were significantly better in the CP790 group than in the placebo group. These results suggest that the intake of CP790-fermented milk could be effective in modulating gut microbiota and improving constipation symptoms and mood states.