Quantum Refrigerator Research Articles

Experimental Realization of a Quantum Refrigerator Driven by Indefinite Causal Orders.

Indefinite causal order (ICO) is playing a key role in recent quantum technologies. Here, we experimentally study quantum thermodynamics driven by ICO on nuclear spins using the nuclear magnetic resonance system. We realize the ICO of two thermalizing channels to exhibit how the mechanism works, and show that the working substance can be cooled or heated albeit it undergoes thermal contacts with reservoirs of the same temperature. Moreover, we construct a single cycle of the ICO refrigerator based on the Maxwell's demon mechanism, and evaluate its performance by measuring the work consumption and the heat energy extracted from the low-temperature reservoir. Unlike classical refrigerators in which the coefficient of performance (COP) is perversely higher the closer the temperature of the high-temperature and low-temperature reservoirs are to each other, the ICO refrigerator's COP is always bounded to small values due to the nonunit success probability in projecting the ancillary qubit to the preferable subspace. To enhance the COP, we propose and experimentally demonstrate a general framework based on the density matrix exponentiation (DME) approach, as an extension to the ICO refrigeration. The COP is observed to be enhanced by more than 3 times with the DME approach. Our Letter demonstrates a new way for nonclassical heat exchange, and paves the way towards construction of quantum refrigerators on a quantum system.

Unified trade-off optimization of quantum harmonic Otto engine and refrigerator.

We investigate quantum Otto engine and refrigeration cycles of a time-dependent harmonic oscillator operating under the conditions of maximum Ω function, a trade-off objective function which represents a compromise between energy benefits and losses for a specific job, for both adiabatic and nonadiabatic (sudden) frequency modulations. We derive analytical expressions for the efficiency and coefficient of performance of the Otto cycle. For the case of adiabatic driving, we point out that in the low-temperature regime, the harmonic Otto engine (refrigerator) can be mapped to Feynman's ratchet and pawl model which is a steady-state classical heat engine. For the sudden switch of frequencies, we obtain loop-like behavior of the efficiency-work curve, which is characteristic of irreversible heat engines. Finally, we discuss the behavior of cooling power at maximum Ω function.

Refrigeration via purification through repeated measurements

We design a measurement-based quantum refrigerator with an arbitrary number of qubits situated in a one-dimensional array that interact through variable-range XY interactions. The method proposed is based on repeated evolution followed by a measurement on the single accessible qubit, which has the potential to reduce the temperature in the rest of the subsystems, thereby demonstrating cooling in the device. The performance of the refrigerator is quantified by the fidelity of each local subsystem with the ground state of the local Hamiltonian and the corresponding probability of success. We identify system parameters, which include the interaction strength, range of interactions, initial temperature of each qubit, and the position of the measured qubit, so that the fidelities of all the unmeasured qubits approach unity with a nonvanishing probability. We observe that although strong interactions during evolution are required to achieve cooling, the long-range interactions typically deteriorate the performance of the refrigerator, which indicates that interactions are not ubiquitous. We report the scalability and the saturation property of the success probability with respect to the system size, which turns out to be independent of the involved system parameters and the number of repeated measurements. Furthermore, we show that the number of subsystems which can be cooled changes depending on the odd or even number of sites in the refrigerator. We argue that the distribution of entanglement between unmeasured qubits can give a possible explanation of the dependence of cooling process on the measured and unmeasured sites.

Continuous measurement boosted adiabatic quantum thermal machines

We present a unified approach to study continuous measurement-based quantum thermal machines in static as well as adiabatically driven systems. We investigate both steady-state and transient dynamics for the time-independent case. In the adiabatically driven case, we show how measurement-based thermodynamic quantities can be attributed geometric characteristics. We also provide the appropriate definition for heat transfer and dissipation owing to continuous measurement in the presence and absence of adiabatic driving. We illustrate the aforementioned ideas and study the phenomenon of refrigeration in two different paradigmatic examples: a coupled quantum dot and a coupled qubit system, both undergoing continuous measurement and slow driving. In the time-independent case, we show that quantum coherence can improve the cooling power of measurement-based quantum refrigerators. Exclusively for the case of coupled qubits, we consider linear as well as nonlinear system-bath couplings. We observe that nonlinear coupling produces cooling effects in certain regimes where otherwise heating is expected. In the adiabatically driven case, we observe that quantum measurement can provide significant boost to the power of adiabatic quantum refrigerators. We also observe that the obtained boost can be larger than the sum of power due to individual effects. The measurement-based refrigerators can have similar or better coefficient of performance in the driven case compared to the static one in the regime where heat extraction is maximum. Our results have potential significance for future application in devices ranging from measurement-based quantum thermal machines to refrigeration in quantum processing networks.

Negative temperature phenomena in two coupled qubit-ensembles

Negative absolute temperature has a wide range of applications, such as high-efficiency quantum heat engines, quantum refrigerators, and quantum simulation. In a recent paper (2018 Phys. Rev. Lett. 120 060403), the authors proposed two spin ensembles coupled to the same reservoir collectively; one ensemble relaxes to negative temperature since the two ensembles have unbalanced spin sizes. However, the coherent coupling mediated by the common environment is not considered. Here, we discuss negative temperature in a system where two qubit-ensembles are coupled to the same 1D waveguide. In the limit of Markovian approximation, by investigating the coherent coupling and non-cross (cross) collective decay between two qubit-ensembles, we find that the duration of the negative temperature state depends on the distance between the two ensembles. The decrease in negative temperature duration is due to the coherent coupling between the two ensembles that will hybridize the unitary evolution of the system. Some optimal points produce the longest duration of negative temperature, but this could not occur since the distance is out of the range of the appropriate regions. The negative temperature subensemble plays the role of a reservoir in the quantum Otto heat engine, which takes place beyond the Otto limit.

Cooper-Pair Box Coupled to Two Resonators: An Architecture for a Quantum Refrigerator

Superconducting circuits present a promising platform with which to realize a quantum refrigerator. Motivated by this, we fabricate and perform spectroscopy of a gated Cooper-pair box, capacitively coupled to two superconducting coplanar-waveguide resonators with different frequencies. We experimentally demonstrate the strong coupling of a charge qubit to two superconducting resonators, with the ability to perform voltage driving of the qubit at gigahertz frequencies. We go on to discuss how the measured device could be modified to operate as a cyclic quantum refrigerator by terminating the resonators with normal-metal resistors acting as heat baths.

Josephson quantum spin thermodynamics

A 1D Josephson junction (JJ) loop, doped with a spin-flipper and attached to two thermal reservoirs is shown to operate as a heat engine, or a refrigerator, or a Joule pump or even as a cold pump. When operating as a quantum heat engine, the efficiency of this device exceeds that of some recent Josephson heat engine proposals. Further, as a quantum refrigerator, the coefficient of performance of this device is much higher than previously proposed JJ based refrigerators. In addition, this device can be tuned from engine mode to refrigerator mode or to any other mode, i.e., Joule pump or cold pump by either tuning the temperature of reservoirs, or via the flux enclosed in the JJ loop. In presence of spin flip scattering we can tune our device from engine mode to other operating modes by only changing the enclosed flux in JJ loop without changing the temperatures of the reservoirs. This is potentially an advantage with respect to other proposals. This makes the proposed device much more versatile as regards possible applications.

Steady-State Heat Transport and Work With a Single Artificial Atom Coupled to a Waveguide: Emission Without External Driving

We observe the continuous emission of photons into a waveguide from a superconducting qubit without the application of an external drive. To explain this observation, we build a two-bath model where the qubit couples simultaneously to a cold bath (the waveguide) and a hot bath (a secondary environment). Our results show that the thermal-photon occupation of the hot bath is up to 0.14 photons, 35 times larger than the cold waveguide, leading to nonequilibrium heat transport with a power of up to 132 zW, as estimated from the qubit emission spectrum. By adding more isolation between the sample output and the first cold amplifier in the output line, the heat transport is strongly suppressed. Our interpretation is that the hot bath may arise from active two-level systems being excited by noise from the output line. We also apply a coherent drive, and use the waveguide to measure thermodynamic work and heat, suggesting waveguide spectroscopy is a useful means to study quantum heat engines and refrigerators. Finally, based on the theoretical model, we propose how a similar setup can be used as a noise spectrometer which provides a new solution for calibrating the background noise of hybrid quantum systems.

Bargmann Representation of Quantum Absorption Refrigerators

In this work, we solve the quantum absorption refrigerator analytically in the space of holomorphic functions with Gaussian measure . Our approach simplifies the calculations since for a given quantum system the coordinate representation of any quantum state is always more complicated than its corresponding expression written with respect to the phase-space coordinate $z_{i}$. We finally discuss the computational complexity of the holomorphic representation and compare it with the computational complexity of the standard operator method and prove the efficiency of the holomorphic representation in computing some tasks. Our treatment is applicable to all quantum heat engines and refrigerators.

Steady state entanglement behavior between two quantum refrigerators

An entangled steady-state behavior between two quantum thermal refrigeration machines is evaluated. Each machine is made up of three qubits of two-level, where each qubit interacts with its proper reservoir. The coupling between the qubits and the reservoirs is investigated with weak interaction. In addition, thermodynamic quantities such as heat flux are examined as a function of entanglement. The effect of temperature on entanglement is also studied in the cases of resonance and non-resonance. The obtained results show that the steady-state entanglement is more robust in the case of resonance than in the case of non-resonance. However, the maintenance in this case corresponds to the higher cooling power of the machine.

Designing robust quantum refrigerators in disordered spin models

We explore a small quantum refrigerator in which the working substance is made of paradigmatic nearest-neighbor quantum spin models, the XYZ and the XY model with Dzyaloshinskii-Moriya interactions, consisting of two and three spins, each of which is in contact with a bosonic bath. We identify a specific range of interaction strengths which can be tuned appropriately to ensure a cooling of the selected spin in terms of its local temperature in the weak-coupling limit. Moreover, we report that in this domain, when one of the interaction strengths is disordered, the performance of the thermal machine operating as a refrigerator remains almost unchanged instead of degradation, thereby establishing the flexibility of this device. However, to obtain a significant amount of cooling via ordered as well as disordered spin models, we observe that one has to go beyond the weak-coupling limit and compute the figures of merits by using global master equations.

Bounds on fluctuations for ensembles of quantum thermal machines

We study universal aspects of fluctuations in an ensemble of noninteracting continuous quantum thermal machines in the steady-state limit, beyond linear response. Considering an individual machine, such as a refrigerator, in which relative fluctuations (and high order cumulants) of the cooling heat current to the absorbed heat current, η (n), are upper-bounded, with n ⩾ 2 and η C the Carnot efficiency, we prove that an ensemble of N distinct machines similarly satisfies this upper bound on the relative fluctuations of the ensemble, . For an ensemble of distinct quantum refrigerators with components operating in the tight-coupling limit we further prove the existence of a lower bound on in specific cases, exemplified on three-level quantum absorption refrigerators and resonant-energy thermoelectric junctions. Beyond special cases, the existence of a lower bound on for an ensemble of quantum refrigerators is demonstrated by numerical simulations. We further show that the lower bound on may, however, be violated for an ensemble of quantum engines.

The effects of common reservoirs on the performance of an autonomous three-level quantum refrigerator

We study the effects of common reservoirs on the performance of an autonomous three-level quantum refrigerator. We show that the common reservoirs can result not only in additional transitions but also different types of interferences between them. For the case that the sole object to be cooled is a cold reservoir, it turns out that the cooling power can be greatly enhanced by the common reservoirs as well as by the induced interference. For the configuration that the refrigerator acts on both the cold reservoir and a qubit, we find that though the common reservoirs can improve the cooling power, which instead is detrimental to the cooling of the qubit. The interference also manifests different effects on the cooling of the cold reservoir and the qubit. Our results provide an evidence of possibility on applying the common reservoirs to enhance the performance of the refrigerator.

Identifying optimal cycles in quantum thermal machines with reinforcement-learning

The optimal control of open quantum systems is a challenging task but has a key role in improving existing quantum information processing technologies. We introduce a general framework based on reinforcement learning to discover optimal thermodynamic cycles that maximize the power of out-of-equilibrium quantum heat engines and refrigerators. We apply our method, based on the soft actor-critic algorithm, to three systems: a benchmark two-level system heat engine, where we find the optimal known cycle; an experimentally realistic refrigerator based on a superconducting qubit that generates coherence, where we find a non-intuitive control sequence that outperforms previous cycles proposed in literature; a heat engine based on a quantum harmonic oscillator, where we find a cycle with an elaborate structure that outperforms the optimized Otto cycle. We then evaluate the corresponding efficiency at maximum power.

Shortcut-to-adiabaticity quantum tripartite Otto cycle

For an Otto cycle there always exists a trade-off between the cycle efficiency and the output power due to the requirement of cycle length. The shortcut to adiabatic (STA) technology provides an effective way to deal with the difficulty of zero-output power in conventional Otto cycle. In this paper, the Otto cycle of three-qubit system as the working substance with counterdiabatic driving has been investigated. It is demonstrated that the tripartite Otto cycle as a universal machine, in the suitable regimes of external control parameter, could work as a quantum heat engine (QHE), refrigerator or heat pump. And, the performances of QHE and refrigerator with and without STA, such as the power and efficiency of QHE and the coefficient of performance (COP) and figure of merit (FOM) of refrigerator, have been investigated. It shows the application of STA scheme can lead to an effective enhancement in the performances of Otto cycle, including achievements of a high QHE’s/refrigerator’s power associated with a moderate QHE’s efficiency/COP of refrigerator. Especially, it is interesting that even in a short-time cycle the optimization of control parameters could arise a remarkable improvement in the efficiency (or COP) of STA QHE (refrigerator), approaching the ideal efficiency or COP of conventional Otto cycle with quasi-static process. Finally, with the aid of parameter optimization the trade-off regions between the efficiency and the power (the COP and the FOM) of STA Otto engine (refrigerator) have been advised.

Three qubits in less than three baths: Beyond two-body system-bath interactions in quantum refrigerators

We show that quantum absorption refrigerators, which have traditionally been studied as of three qubits, each of which is connected to a thermal reservoir, can also be constructed by using three qubits and two thermal baths, where two of the qubits, including the qubit to be locally cooled, are connected to a common bath. With a careful choice of the system, bath, and qubit-bath interaction parameters within the Born-Markov and rotating-wave approximations, one of the qubits attached to the common bath achieves a cooling in the steady state. We observe that the proposed refrigerator may also operate in a parameter regime where no or negligible steady-state cooling is achieved, but there is considerable transient cooling. The steady-state temperature can be lowered significantly by an increase in the strength of the few-body interaction terms existing due to the use of the common bath in the refrigerator setup. The proposed refrigerator built with three qubits and two baths is shown to provide steady-state cooling for both Markovian qubit-bath interactions between the qubits and canonical bosonic thermal reservoirs, and a simpler reset model for the qubit-bath interactions.

Quantum cycle in relativistic non-commutative space with generalized uncertainty principle correction

Quantum heat cycles and quantum refrigerators are analyzed using various quantum systems as their working mediums. For example, to evaluate the efficiency and the work done of the Carnot cycle in the quantum regime, one can consider the harmonic oscillator as a working medium. For all these well-defined working substances (which are analyzed in commutative space structure), the efficiency of the engine is not up to the mark of the Carnot efficiency. So, one inevitable question arise, can one observe a catalytic effect on the efficiency of the engines and refrigerators when the space structure is changed? In this paper, two different working substances in non-commutative spacetime with relativistic and generalized uncertainty principle corrections have been considered for the analysis of the efficiency of the heat engine cycles. The efficiency of the quantum heat engine gets a boost for higher values of the non-commutative parameter with a harmonic oscillator as the working substance. In the case of the second working medium (one-dimensional infinite potential well), the efficiency shows a constant result in the non-commutative space structure.

Periodically refreshed baths to simulate open quantum many-body dynamics

Obtaining dynamics of an interacting quantum many-body system connected to multiple baths initially at different, finite, temperatures and chemical potentials is a challenging problem. This is due to a combination of the prevalence of strong correlations in the system, the infinite nature of the baths and the long time to reach steady state. In this work we develop a general formalism that allows access to the full non-Markovian dynamics of such open quantum many-body systems up to the non-equilibrium steady state (NESS), provided its uniqueness. Specifically, we show how finite-time evolution in presence of finite-sized baths, whose opportune size is determined by their original spectral density, can be recursively used to faithfully reconstruct the exact dynamics without requiring any small parameter. Such a reconstruction is possible even in parameter regimes which would otherwise be inaccessible by current state-of-the-art techniques. We specifically demonstrate this by obtaining the full numerically exact non-Markovian dynamics of interacting fermionic chains in two terminal set-ups with finite temperature and voltage biases, a problem which previously remained outstanding despite its relevance in a wide range of contexts, for example, quantum heat engines and refrigerators.

Few-qubit quantum refrigerator for cooling a multi-qubit system

We propose to use a few-qubit system as a compact quantum refrigerator for cooling an interacting multi-qubit system. We specifically consider a central qubit coupled to N ancilla qubits in a so-called spin-star model to be used as refrigerant by means of short interactions with a many-qubit system to be cooled. We first show that if the interaction between the qubits is of the longitudinal and ferromagnetic Ising model form, the central qubit is colder than the environment. We summarize how preparing the refrigerant qubits using the spin-star model paves the way for the cooling of a many-qubit system by means of a collisional route to thermalization. We discuss a simple refrigeration cycle, considering the operation cost and cooling efficiency, which can be controlled by N and the qubit–qubit interaction strength. Besides, bounds on the achievable temperature are established. Such few-qubit compact quantum refrigerators can be significant to reduce dimensions of quantum technology applications, can be easy to integrate into all-qubit systems, and can increase the speed and power of quantum computing and thermal devices.

Unified trade-off optimization of a three-level quantum refrigerator

We study the optimal performance of a three-level quantum refrigerator using a trade-off objective function, Ω function, which represents a compromise between the energy benefits and the energy losses of a thermal device. First, we optimize the performance of our refrigerator by employing a two-parameter optimization scheme and show that the first two terms in the series expansion of the obtained coefficient of performance (COP) match with those of some classical models of the refrigerator. Then, in the high-temperature limit, optimizing with respect to one parameter while constraining the other one, we obtain the lower and upper bounds on the COP for both strong as well as weak (intermediate) matter-field coupling conditions. In the strong matter-field coupling regime, the obtained bounds on the COP exactly match with the bounds already known for some models of classical refrigerators. Further, for weak matter-field coupling, we derive some new bounds on the COP of the refrigerator, which lie beyond the range covered by bounds obtained for strong matter-field coupling. Then, in the parameter regime where both cooling power and Ω function can be maximized, we compare the cooling power of the quantum refrigerator at maximum Ω function with the maximum cooling power. Finally, in addition to carrying optimization over the internal parameters (frequencies) of the three-level system, we optimize the performance of the three-level model with respect to system-bath coupling parameters and highlight its implications on the performance of both engine and refrigerator modes of operation.