Opposite Polarity Research Articles

Electron-phonon interaction, magnetic phase transition, charge density waves, and resistive switching in VS2 and VSe2 revealed by Yanson point-contact spectroscopy

VS2 and VSe2 have attracted particular attention among the transition metals dichalcogenides because of their promising physical properties concerning magnetic ordering, charge density wave (CDW), emergent superconductivity, etc., which are very sensitive to stoichiometry and dimensionality reduction. Yanson point-contact (PC) spectroscopic study reveals metallic and nonmetallic states in VS2 PCs, as well as a magnetic phase transition, was detected near 20 K. The rare PC spectra, where the magnetic phase transition was not visible, show a broad maximum of around 20 mV, likely connected with electron-phonon interaction (EPI). The PC spectra of VSe2 demonstrate metallic behavior, which allowed us to detect features associated with EPI and CDW transition. The Kondo effect appeared for both compounds, apparently due to interlayer vanadium ions. Besides, the resistive switching was observed in PCs on VSe2 between a low resistive, mainly metallic-type state, and a high resistive nonmetallic-type state by applying bias voltage (about 0.4 V). Reverse switching occurs by applying a voltage of opposite polarity (about 0.4 V). The reason may be the alteration of stoichiometry in the PC core due to the displacement of V ions to interlayer under a high electric field. The observed resistive switching characterizes VSe2 as a potential material, e.g., for non-volatile resistive RAM, neuromorphic engineering, and other nanoelectronic applications. Per contra, VS2 attracts attention as a rare layered van der Waals compound with magnetic transition.

Elucidation of the “jumping and dropping” phenomena of piezoelectric vibrators in high-amplitude operations in the vicinity of their mechanical resonance frequencies

The peculiar events called the “jumping and dropping” phenomena of piezoelectric ceramic vibrators in high amplitude operation have been widely known. The phenomena, that occur solely in the vicinity of the mechanical resonance frequencies of the vibrators, are due to the emergence of hysteresis in the frequency domain with an abrupt increase and decrease of the vibratory amplitude. It has long been believed that the nonlinearity of the piezoelectric materials is the dominant cause of the unstable vibratory behaviors. Nevertheless, the authors have found that they can be attributed to the local piezoelectric polarization reversals due to the electric field concentration caused by its conspicuous distortion inside the vibrators in mechanical resonance. This hypothesis has been examined by numerical and experimental investigations for hard-type piezoelectric ceramic disks vibrating in axisymmetric radially pulsating mode.

Ferroelectric Al0.85Sc0.15N and Hf0.5Zr0.5O2 Domain Switching Dynamics.

The capability to reliably program partial polarization states with nanosecond programming speed and femtojoule energies per bit in ferroelectrics makes them an ideal candidate to realize multibit memory elements for high-density crossbar arrays, which could enable neural network models with a large number of parameters at the edge. However, a thorough understanding of the domain switching dynamics involved in the polarization reversal is required to achieve full control of the multibit capability. Transient current integration measurements are adopted to investigate the domain dynamics in aluminum scandium nitride (Al0.85Sc0.15N) and hafnium zirconium oxide (Hf0.5Zr0.5O2). The switching dynamics are correlated to the crystal structure of the films. The contributions of domain nucleation and domain wall motion are decoupled by analyzing the rate of change of the time-dependent normalized switched polarization. Thermally activated creep domain wall motion characterizes the Al0.85Sc0.15N switching dynamics. The statistics of independently nucleating domains and the domain wall creep motion in Hf0.5Zr0.5O2 are associated with the spatially inhomogeneous distribution of local switching field due to polymorphism, absence of preferential crystallite orientation, as well as defects and charges that can be located at the grain boundaries. The c-axis texture, single-phase nature, and strong likelihood of less fabrication process-induced defects contribute to the homogeneity of the local switching field in Al0.85Sc0.15N. Nonetheless, defects generated and redistributed upon bipolar electric field switching cycling result in Al0.85Sc0.15N domain wall pinning. The wake-up effect in Hf0.5Zr0.5O2 is explained thorough the continuous addition of switchable regions associated with two independent distributions of characteristic switching times.

Modulation of Polarization in Sliding Ferroelectrics by Introducing Intrinsic Electric Fields.

The emergence of sliding ferroelectricity facilitates low-barrier ferroelectrics in two-dimensional materials, while limited electric polarizations impede practical applications. Herein, we propose an effective strategy to enlarge the polarization by introducing an intrinsic electric field, exemplified by Janus transition metal dichalcogenides (TMDs) with the first-principle calculations. The intrinsic electric field is introduced and regulated by leveraging the electronegativity differences among chalcogens. An improved polarization is achieved in the Janus TeMoS bilayer with a polarization of 1.18 pC/m, a 65% enhancement compared to normal TMD bilayers. Through differential charge density analysis, the inner mechanism is attributed to the effects of intrinsic electric fields on charge redistribution. Furthermore, the feasibility of polarization reversal is determined by evaluating switching barriers and the responses under an electric field. The provided proposal is applicable and available for broader systems and will pave the way for the development of novel electronic devices.

A Halogen‐Bonded Fluorescent Molecular Photoswitch: Transition from 3D Cubic Lattice to 1D Helical Superstructure for Polarization Inversion of Circularly Polarized Luminescence

AbstractThe fabrication of materials that can switch between circularly polarized luminescence (CPL) signals is both essential and challenging. Here, two new halogen‐bonded fluorescent molecular photoswitches, namely, HB‐switch 1 and HB‐switch 2, containing α‐cyano‐substituted diarylethene compounds with different end groups were developed. Upon exposure to specific UV or visible light wavelengths, they exhibited controllable and reversible Z/E photoisomerization. When these switches were integrated into blue‐phase liquid crystals (BPLCs), the temperature range of BP significantly expanded. Notably, the BP system incorporating HB‐switch 1 exclusively achieved reversible polarization inversion of CPL signals under irradiation with specific UV/Visible light and during cooling/heating. The photo/thermal dual‐response behavior of the CPL signals can be attributed to the phase transition from a high‐symmetry 3D BP Icubic lattice to a low‐symmetry 1D helical superstructure induced by the Z/E photoisomerization of HB‐switch 1 and temperature changes. This study underscores the significance of employing halogen‐bond assembly strategies to design materials with switchable CPL signals, opening new possibilities for CPL‐active systems.

A Halogen-Bonded Fluorescent Molecular Photoswitch: Transition from 3D Cubic Lattice to 1D Helical Superstructure for Polarization Inversion of Circularly Polarized Luminescence.

The fabrication of materials that can switch between circularly polarized luminescence (CPL) signals is both essential and challenging. Here, two new halogen-bonded fluorescent molecular photoswitches, namely, HB-switch 1 and HB-switch 2, containing α-cyano-substituted diarylethene compounds with different end groups were developed. Upon exposure to specific UV or visible light wavelengths, they exhibited controllable and reversible Z/E photoisomerization. When these switches were integrated into blue-phase liquid crystals (BPLCs), the temperature range of BP significantly expanded. Notably, the BP system incorporating HB-switch 1 exclusively achieved reversible polarization inversion of CPL signals under irradiation with specific UV/Visible light and during cooling/heating. The photo/thermal dual-response behavior of the CPL signals can be attributed to the phase transition from a high-symmetry 3D BP Icubic lattice to a low-symmetry 1D helical superstructure induced by the Z/E photoisomerization of HB-switch 1 and temperature changes. This study underscores the significance of employing halogen-bond assembly strategies to design materials with switchable CPL signals, opening new possibilities for CPL-active systems.

Dynamic evolution of amplitude and position of geomagnetic secular acceleration pulses since 2000

Recent studies on the behavior of geomagnetic secular acceleration (SA) pulses have provided a basis for understanding the dynamic processes in the Earth’s core. This analysis statistically evaluates the evolution of the SA pulse amplitude and position since 2000 by computing the three-year difference in SA with the CHAOS-7 geomagnetic field model (CHAOS-7.17 release). Furthermore, the study explores the correlation between the acceleration pulse amplitude and geomagnetic jerks and the dynamic processes of alternating variation and polarity reversal of pulse patches over time. Research findings indicate that the variation in pulse amplitude at the Core Mantle Boundary (CMB) closely resembles that observed at the Earth’s surface, with an average period of 3.2 years. The timing of peak pulse amplitude aligns with that of the geomagnetic jerk, suggesting its potential utility as a novel indicator for detecting geomagnetic jerk events. The acceleration pulses are the strongest near the equator (2°N) and more robust in the high-latitude region (68°S) of the Southern Hemisphere, indicating that the variation is more dramatic in the Southern Hemisphere. The acceleration pulses fluctuate unevenly in the west-east direction, with characteristics of local variation. In the Western Hemisphere, the pulse patches are distributed near the equator, exhibiting an evident westward drifting mode. The positive and negative patches alternate in time, displaying a polarity reversal in the west-east direction, with an average interval of approximately 32°. These characteristics can be attributed to the rapid magnetic field fluctuations disclosed by the model of stratification at the top of the Earth’s core. In the Eastern Hemisphere, the pulses are weaker between 10°E and 60°E, with the most active pulses occurring around 80°E to 105°E and near 150°E. The pulse patches exhibit a broader distribution in the north-south direction, with relatively strong patches still occurring near 40°N and 40°S. These local variation characteristics match the actual cases of zonal flows and geostrophic Alfvén waves in the Earth’s core.

Resetting the Drift of Oxygen Vacancies in Ultrathin HZO Ferroelectric Memories by Electrical Pulse Engineering

Ferroelectric HfO2‐based films incorporated in nonvolatile memory devices offer a low‐energy, high‐speed alternative to conventional memory systems. Oxygen vacancies have been rigorously cited in literature to be pivotal in stabilizing the polar noncentrosymmetric phase responsible for ferroelectricity in HfO2‐based films. Thus, the ability to regulate and control oxygen vacancy migration in operando in such materials would potentially offer step changing new functionalities, tunable electrical properties, and enhanced device lifespan. Herein, a novel in‐ operando approach to control both wake‐up and fatigue device dynamics is reported. Via clever design of short ad hoc square electrical pulses, both wake‐up can be sped up and both fatigue and leakage inside the film can be reduced, key factors for enhancing the performance of memory devices. Using plasmon‐enhanced photoluminescence and dark‐field spectroscopy (sensitive to <1% vacancy variation), evidence that the electrical pulses give rise to oxygen vacancy redistribution is provided and it is shown that pulse engineering effectively delays wake‐up and reduces fatigue characteristics of the HfO2‐based films. Comprehensive analysis also includes impedance spectroscopy measurements, which exclude any influence of polarization reversal or domain wall movement in interpretation of results.

Electrical de-poling and re-poling of relaxor-PbTiO3 piezoelectric single crystals without heat treatment

Re-poling of unexpected partially depoled piezoelectric materials conventionally needs to be first fully depoled through annealing above their Curie temperature to revive piezoelectric performances. Here, we investigated de-poling and re-poling of Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals under electric fields at room temperature. We found that alternating current electric fields with amplitudes near the coercive field at low frequencies (<10 Hz) can be employed to successfully depolarize poled crystals at room temperature. We also demonstrated a reversible polarization switching process with a relaxor-PbTiO3 single crystal ultrasound transducer without device performance degradations. This experimental observation is supported by phase-field simulation, showing that alternating current electric fields can readily induce de-poling at room temperature, while direct current electric fields induce a transient depoled state only within an uncontrollable short period of time. The findings suggest new strategies for unprecedented in-device tailoring of the polarization states of ferroelectric materials.

Striosomes Target Nigral Dopamine-Containing Neurons via Direct-D1 and Indirect-D2 Pathways Paralleling Classic Direct-Indirect Basal Ganglia Systems.

Direct S-D1 and Indirect S-D2 striosomal pathways target SNpc dopamine cellsThe S-D2 indirect pathway targets a distinct central external pallidal zone (cGPe)Stimulation of S-D2 increases, of S-D1 decreases, striatal dopamine and movementS-D1 SPNs activity brackets task, inverse to a mid-task peak of dopamine release.

Deep trapped bipolar heterocharges enable electret nanofibrous membranes for high-efficiency PM0.3 filtration

Recently frequent global pandemic outbreak triggers the demand of high-efficiency aerosol filtration materials. Most of traditional electret air filters can hardly achieve high efficiency (>99.99 %) due to limited charge density and inappropriate charge distribution. The influence mechanism of nanofibers bipolar heterocharge configuration on electrostatic capture of airborne particles is still confusing. Herein, a novel strategy to create high-efficiency air filters based on electret nanofibrous membranes with deep trapped heterocharge is reported. Space charges and dipole charges with opposite polarity are formed in electrospun membranes composed of different polymers under in-situ charge injection and electric poling during electrospinning. Nanoscale spatial surface potential mapping on individual nanofiber characterized by Kelvin probe force microscopy demonstrates bipolar heterocharge distribution. Numerical simulation shows that fiber heterocharge distribution endows the electret membrane with greater electrostatic field intensity gradient, resulting in stronger electrostatic force between nanofibers and airborne particles. With bipolar heterocharge configuration and bimodal fiber diameter distribution, the nanofibrous membranes exhibit high-efficiency low-resistance filtration property against 0.3 μm NaCl particles (99.994 %, 97.4 Pa) at 5.3 cm s−1. Furthermore, benefiting from charges with deep trap energy of 1.12 eV, the membranes still maintain 99.972 % filtration efficiency after 40 h exposure in 95 % relatively humidity. The prepared membranes brings new insight in the design of high-efficiency and long-term stability air filtration materials for public health precaution. This study not only reveals influence mechanism of nanofibers heterocharge distribution on electrostatic attraction, but also provides useful guidance for fiber charge configuration design to improve aerosol filtration performance of electret filters.

Soldered chip reversed polarity detection based on semi-combinatorial attention and size-sensitive IoU

Abstract Chips that have been automatically soldered may have defects such as short circuits, reversed polarity, offsets, and missing components. This paper proposes a reversed polarity detection algorithm (RPDNet) for soldered chips based on semi-combinatorial attention and size-sensitive IoU to solve the polarity reversal problem. To distinguish characters or patterns similar to polarity markings in the background, a semi-combination attention module (SCAM) is designed, which effectively distinguishes the subtle feature differences between polarity markings and background elements by integrating the long-range dependence of the self-attention mechanism and the local focusing ability of the general attention mechanism, thereby reducing misdetection of polarity markings. Aiming at the problem of blurred chip polarity markings, a differential pooling module (DPM) is proposed, which optimizes the downsampling process of fuzzy polarity markings by combining the differential features obtained from subtracting the results of max pooling from average pooling with features derived solely from average pooling, thereby reducing the information loss of fuzzy markings during the feature extraction process. In order to solve the lack of sensitivity of CIoU to the side length of the bounding box, a size-sensitive IoU(SIoU) is proposed. Through the size-sensitivity factor and area difference loss term, the model strengthens the focus on boundary regression and achieves faster and more accurate target positioning. Using the Chip-Set provided by the company for experiments and tests, the detection accuracy reached 97.79% and the processing speed reached 107 FPS.&amp;#xD;

Surface degradation of epoxy resin exposed to corona discharge under bipolar square wave field: From phenomenon to the insights

The unavoidable corona discharge induced by distorted field is detrimental to the safety of power equipment, especially the equipment with high voltage magnitude and high frequency. In this paper, the degradation morphology, residual components, lifetime of endurance, partial discharge characteristics, and evolution of surface traps of epoxy insulation under bipolar square wave field is investigated. The results show that degraded zone exhibits as three layers with round pits and channel-like ravines on the surface of epoxy resin exposed to corona discharge. It is demonstrated that more oxygen element during corona discharge while more carbon element during breakdown appeared, and nano-Al2O3 fillers migrates to the discharged zone. The maximum temperature and number of emitted phonons increase with voltage amplitude and frequency in power law and exponential form, respectively, corresponding to the fitting function of endurance lifetime. The emitted light is concentrated on the near ultraviolet (UV) and infrared ray (IR) band, indicating the energy pooling and thermal effect of corona discharge, which interprets the distinct degradation behavior of samples under sinusoidal and bipolar square wave voltage. The effect of space charge and thermal conductivity should be considered simultaneously in the degradation of epoxy insulation under bipolar square wave field due to polarity reversal and high frequency, which is proved by the disparate behavior of EP/nano-Al2O3 composites resistance to corona discharge and the breakdown moment at falling edge of bipolar square wave voltage. This work may contribute to the advancement of resistance to corona discharge degradation in equipment with high power density, high voltage amplitude and high frequency.

Brief communication: On the potential of seismic polarity reversal to identify a thin low-velocity layer above a high-velocity layer in ice-rich rock glaciers

Abstract. Seismic refraction tomography is a commonly used technique to characterise rock glaciers, as the boundary between unfrozen and ice-bearing layers represents a strong impedance contrast. In several rock glaciers, we observed a reversed polarity of the waves refracted by an extended ice-bearing layer compared to direct-wave arrivals. This phase change may be related to the presence of a thin low-velocity layer (LVL), such as fine- to coarse-grained sediments, above a thicker ice-rich layer. Our results are confirmed by the modelling and analysis of synthetic seismograms to demonstrate that the presence of a low-velocity layer can produce a polarity reversal on the seismic gather.

Programmed alternating current optimization of Cu-catalyzed C-H bond transformations.

Direct current (DC) electrosynthesis, which has undergone optimization over the past century, plays a pivotal role in a variety of industrial processes. Alternating current (AC) electrosynthesis, characterized by polarity reversal and periodic fluctuations, may be advantageous for multiple chemical reactions, but apparatus, principles, and application scenarios remain underdeveloped. In this work, we introduce a protocol for programmed AC (pAC) electrosynthesis that systematically adjusts currents, frequencies, and duty ratios. The application of representative pAC waveforms facilitates copper-catalyzed carbon-hydrogen bond cleavage in cross-coupling and difunctionalization reactions that exhibit suboptimal performance under DC and chemical oxidation conditions. Moreover, observing catalyst dynamic variation under diverse waveform applications provides mechanistic insight.

Physical Properties of CaTiO3-Modified NaNbO3 Thin Films.

NaNbO3(NN)-based lead-free materials are attracting widespread attention due to their environment-friendly and complex phase transitions, which can satisfy the miniaturization and integration for future electronic components. However, NN materials usually have large remanent polarization and obvious hysteresis, which are not conducive to energy storage. In this work, we investigated the effect of introducing CaTiO3((1-x)NaNbO3-xCaTiO3) on the physical properties of NN. The results indicated that as x increased, the surface topography, oxygen vacancy and dielectric loss of the thin films were significantly improved when optimal value was achieved at x = 0.1. Moreover, the 0.9NN-0.1CT thin film shows reversible polarization domain structures and well-established piezoresponse hysteresis loops. These results indicate that our thin films have potential application in future advanced pulsed power electronics.

Partitioning polar-slush strategy in relaxors leads to large energy-storage capability.

Relaxor ferroelectric (RFE) films are promising energy-storage candidates for miniaturizing high-power electronic systems, which is credited to their high energy density (Ue) and efficiency. However, advancing their Ue beyond 200 joules per cubic centimeter is challenging, limiting their potential for next-generation energy-storage devices. We implemented a partitioning polar-slush strategy in RFEs to push the boundary of Ue. Guided by phase-field simulations, we designed and fabricated high-performance Bi(Mg0.5Ti0.5)O3-SrTiO3-based RFE films with isolated slush-like polar clusters, which were realized through suppression of the nonpolar cubic matrix and introduction of highly insulating networks. The simultaneous enhancement of the reversible polarization and breakdown strength leads to a Ue of 202 joules per cubic centimeter with a high efficiency of ~79%. The proposed strategy provides a design freedom for next-generation high-performance dielectrics.

Continuous Electrocoagulation for a Sustainable Water Treatment: Effects of Electrode Configuration, Electrical Connection Mode, and Polarity Reversal on Fluoride Removal

Water pollution in southern Tunisia, particularly in the mining basin of Gafsa, is primarily due to elevated levels of fluoride ions. This study focuses on removing fluoride from Metlaoui’s tap water through a continuous electrocoagulation (EC) treatment. With a fluoride concentration of 3.5 mg·L−1, this water exhibits the highest fluoride levels in Gafsa’s mining basin. The study investigates the impact of electrode configuration on fluoride removal from tap water through continuous electrocoagulation treatment. Configuring the electrodes perpendicular to the water flow improves the aluminum dissolution by electrocoagulation and the fluoride removal efficiency. Additionally, the study explores the effect of electrical connection modes on electrode performance, showing consistent fluoride removal yield under identical current densities and electrochemical cell numbers. Furthermore, the study examines cathodic deposit removal through polarity reversal, demonstrating its effectiveness in eliminating deposits and achieving high fluoride removal yields, especially with polarity reversal every minute. This method proves to be an efficient approach for a more sustainable fluorinated water treatment, eliminating cathodic deposits without the need for chemical or mechanical interventions, and without producing additional effluents or waste. The optimization of these parameters not only enhances fluoride removal efficiency, but also reduces energy consumption and operational costs, thereby promoting the sustainable management of energy and water resources.

Magnetic vortex polarity reversal induced gyrotropic motion spectrum splitting in a ferromagnetic disk

We investigate the gyrotropic motion of the magnetic vortex core in a chain of a few micron-sized Permalloy disks by electrical resistance measurement with amplitude-modulated magnetic field. We observe a distinctive splitting of the resistance peak due to the resonant vortex-core motion under heightened radio frequency (RF) magnetic field excitation. Our micromagnetic simulation identifies the splitting of the resonant peak as an outcome of vortex polarity reversal under substantial RF amplitudes. This study enhances our understanding of nonlinear magnetic vortex dynamics amidst large RF amplitudes and proposes a potential pathway for spintronic neural computing thanks to their unique and controllable magnetization dynamics.

The impact of using reverse polarity text for children with vision impairment assessed using light-adapted flicker electroretinogram

ABSTRACT Clinical Relevance Children with vision impairment can have difficulty accessing classroom reading material and knowledge of which students are likely to have improved performance reading performance with reverse polarity would be of value to educators. Background Printed material is typically presented as black text on a white background; however, reversing the polarity to white text on a black background may improve the reading speed for children with vision impairment. This study sought to identify the visual function or pathological features of children with vision impairment where reversing the polarity of text would improve their reading performance. Methods Forty-eight vision-impaired participants (27 male), aged 5–18 years with binocular visual acuities between 0.18–1.52 logMAR, were included. Reading performance was assessed by changes in Critical Print Size (ΔCPS), Maximum Reading Speed (ΔMRS) in normal and reverse polarity digital print, and numeric reading speed (ΔNRS) with normal and reverse polarity fonts. Correlations were made with 30 Hz flicker electroretinogram amplitude and high/low contrast acuity. Paired nonparametric tests evaluated significance in pathological condition groups. Results Significant negative correlations were only found between the 30 Hz flicker amplitude and ΔMRS (r = −.42, p = .028) and ΔNRS (r = −.46, p = .027). Follow-up pairwise comparisons based on pathology group only showed a significant effect of the retinal dystrophy group and CPS (n = 12, z = −2.24, p = .025). All other pairwise comparisons based on group were non-significant (p > .05). Conclusions This study did not identify a specific pathological group or visual functional measure that could be used as a clinical marker to predict the impact of reversing polarity. However, significant improvements could be made in reading performance for some children and so a reading performance assessment is recommended for all children with vision impairment.