Solvent Research Articles

Targeted ultra-high performance liquid chromatography-tandem mass spectrometry assay for the quantification of medium-chain phosphatidylcholines in platelets of coronary artery disease patients

In a recent untargeted clinical lipidomics study of platelets of coronary artery disease (CAD) patients, medium-chain phosphatidylcholines (MCPCs) with C8 and C10 fatty acyl residues were found significantly upregulated in the patient group with acute coronary syndrome (ACS) as compared to chronic coronary syndrome (CCS) and healthy controls. To support this finding, this work presents the development and optimization of a targeted UHPLC-QTrap-MS/MS method with multiple reaction monitoring acquisition for the quantitative analysis of MCPCs (PC 10:0/8:0, PC 16:0/8:0, PC 10:0/20:4 and PC 10:0/10:0) in platelets for biomarker validation. A systematic optimization of chromatographic and mass spectrometric parameters was performed. A charged surface hybrid CSH C18 (1.7 µm, 130 Å) column and fine-tuned gradient elution with 2-propanol/acetonitrile and ammonium acetate as additive to the mobile phase was employed in the final method in ESI negative mode. Four selected PC standards (PC 6:0/6:0, PC 8:0/8:0, PC 10:0/10:0 and PC 12:0/12:0), which cover well the carbon and retention rime range of the target analytes, were used for the optimization process and calibration. Quantification was based on matrix-matched calibration with these four selected commercially available MCPC standards as surrogate calibrants and PC 6:0/6:0 (d22) as internal standard. Furthermore, an organic solvent and fatty acyl carbon number-corrected response factor approach gave also accuracies within acceptance limits of bioanalytical validation guidelines and has more generic applicability. Compared to the previous untargeted RPLC-ESI-QTOF-MS/MS method, the optimized targeted UHPLC-QTrap-MS/MS assay showed increased sensitivity and selectivity for the detection of medium-chain PCs in platelet samples of CAD (LOQs in the range of 0.5-5 nmol/L). The method performance parameters indicated its suitability for a future biomarker validation study of MCPCs in platelets.

Overview of Baker's Yeast as a Biocatalyst

Biocatalysis is an approach to green chemistry. A crucial step in the synthesis of or-ganic compounds is the reduction of aldehydes and ketones to secondary alcohols. The use of a biocatalyst, such as enzymes or entire cells, has not affected this process.. It offers great selectiv-ity, high specificity, and an environmentally friendly approach to synthesis. Dried baker's yeast mediates the conversion of optically active alcohols from aromatic aldehydes and ketones. This work highlights applications of Baker's yeast in synthesizing pharmaceutical intermediates and chiral building blocks, demonstrating its practical relevance. Sustainable technology is based on the ideas and measurements of sustainable development and green for good enantioselectivity across several organic solvents.

A novel bio-aerogel based on agroforestry waste chestnut shell for enhanced oil-water separation performance

Bio-based aerogels have attracted much attention due to their biodegradability and excellent oil-water separation properties. However, the preparation of inexpensive green aerogels with high separation efficiency is still a great challenge. In this paper, low-density, high-adsorption capacity and superhydrophobic chestnut shell-based bio-aerogels were prepared by chemical cross-linking and chemical vapor deposition using agricultural and forestry waste chestnut shells as the precursor of aerogels to achieve high efficiency of oil-water separation and to achieve the goal of “treating waste with waste”. The covalent cross-linking of chestnut shell cellulose and cross-linking agent to form silicone-containing functional groups improved the pore structure, hydrophobicity and mechanical properties of chestnut shell cellulose, and under the action of capillary force, the oil was retained in the pores of the bio-aerogels, which achieved the selective adsorption of oil and organic solvents in the oil-water mixture, with a separation efficiency of more than 98%. After 10 cycles, the bio-aerogel still has good reusability. This eco-friendly and low-cost aerogel provides a practical method for resource conversion and recycling, as well as a green and innovative way for the treatment of oily wastewater.

Advances in Aerogels Formulations for Pulmonary Targeted Delivery of Therapeutic Agents: Safety, Efficacy and Regulatory Aspects.

Aerogels are the 3D network of organic, inorganic, composite, layered, or hybrid-type materials that are used to increase the solubility of Class 1 (low solubility and high permeability) and Class 4 (poor solubility and low permeability) molecules. This approach improves systemic drug absorption due to the alveoli's broad surface area, thin epithelial layer, and high vascularization. Local therapies are more effective and have fewer side effects than systemic distribution because inhalation treatment targets the specific location and raises drug concentration in the lungs. The present manuscript aims to explore various aspects of aerogel formulations for pulmonary targeted delivery of active pharmaceutical agents. The manuscript also discusses the safety, efficacy, and regulatory aspects of aerogel formulations. According to projections, the global respiratory drug market is growing 4-6% annually, with short-term development potential. The proliferation of literature on pulmonary medicine delivery, especially in recent years, shows increased interest. Aerogels come in various technologies and compositions, but any aerogel used in a biological system must be constructed of a material that is biocompatible and, ideally, biodegradable. Aerogels are made via "supercritical processing". After many liquid phase iterations using organic solvents, supercritical extraction, and drying are performed. Moreover, the sol-gel polymerization process makes inorganic aerogels from TMOS or TEOS, the less hazardous silane. The resulting aerogels were shown to be mostly loaded with pharmaceutically active chemicals, such as furosemide-sodium, penbutolol-hemisulfate, and methylprednisolone. For biotechnology, pharmaceutical sciences, biosensors, and diagnostics, these aerogels have mostly been researched. Although aerogels are made of many different materials and methods, any aerogel utilized in a biological system needs to be made of a substance that is both biocompatible and, preferably, biodegradable. In conclusion, aerogel-based pulmonary drug delivery systems can be used in biomedicine and non-biomedicine applications for improved sustainability, mechanical properties, biodegradability, and biocompatibility. This covers scaffolds, aerogels, and nanoparticles. Furthermore, biopolymers have been described, including cellulose nanocrystals (CNC) and MXenes. A safety regulatory database is necessary to offer direction on the commercialization potential of aerogelbased formulations. After that, enormous efforts are discovered to be performed to synthesize an effective aerogel, particularly to shorten the drying period, which ultimately modifies the efficacy. As a result, there is an urgent need to enhance the performance going forward.

Isolation and characterization of biomass waste based bioplasticizer from Eucalyptus leaf: A suitability analysis of biofiller for polymeric composites

Plasticizers improve polymeric materials' properties and processability as additives. Currently, a variety of liquid synthetic plasticizers derived from fossil fuels are available. The environmental unsuitability of these materials could potentially lead to adverse effects on the environment. When we compare solid and liquid plasticizers, we find an infinite variety of liquid plasticizers. As a result, our work focuses on the extraction of plasticizer from plant sources. Accordingly, the plasticizer is extracted from eucalyptus leaves via solvent purification and surface catalysis. Research was conducted utilizing X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and Ultraviolet (UV) visible spectroscopy to determine the characteristics of plasticizer. The scanning electron microscopy (SEM) and energy dispersive spectrum (EDS) analysis are used to analyze the surface morphology of the isolated plasticizer. The plasticizer's UV examination reveals active absorption at 375.21 nm. The plasticizer was determined to have a lower density of 0.941 g/cm3. The plasticizer that was extracted had a low solubility in water and organic solvents while possessing an estimated molecular weight of 340. The glass transition temperature of plasticizer was also examined using differential scanning electron microscopy analysis and found to be 64.17°C. The crystallinity index and size were found to be 34.08% and 28.57 nm, respectively. The characteristic features obtained were well-suited for use as filler in polymer composite materials.

Robust carbon nitride nanosheet interlayered thin-film nanocomposite membrane for enhanced organic solvent nanofiltration

The integration of a nanomaterial interlayer within a thin-film composite membrane can markedly enhance its performance in organic solvent nanofiltration (OSN). However, this enhancement often comes at the expense of membrane integrity due to differential swelling behaviors in diverse solvents. In this study, we present an interlayered thin film nanocomposite (TFNi) membrane that demonstrates both high permeance and robust stability, utilizing green, porous, and reactive crystalline carbon nitride (CCN) nanosheets as the functional interlayer. The results revealed that ascribed to the presence of the CCN interlayer, the membranes retained their rejection towards organic dyes even after 10 h of DMF exposure, while the organic solvent permeance was significantly improved by the DMF treatment. The methanol permeance of the CCN-TFNi-DMF membrane reached an impressive 8.77 L m−2 h−1 bar−1, sustaining stable performance throughout a 72 h test period under a pressure of 10 bar. We attributed this performance enhancement to the extra nanochannels introduced by the CCN nanosheets that bolstered the permeance of the TFNi membrane, as well as the formation of a stable polyamide film resulting from the reaction between the amino groups on the CCN nanosheet surface and trimesoyl chloride during the interfacial polymerization process. This work provides valuable insights into the development of structurally reinforced TFNi membranes with exceptional performance for OSN separation applications.

Novel high-strength, recyclable, microbial-resistant, and freeze-thaw dual topological network hydrogel cooling media

The demand for multifunctional hydrogels, offering high mechanical strength, efficient cooling, and antimicrobial properties, is growing in food preservation. Here, a dual-network (DN) hydrogel PM@Cur, which includes curcumin, is fabricated through chemical crosslinking and hydrogen bonding interactions. The resulting hydrogels can withstand more than five freeze-thaw cycles at −80 °C, and resist brittleness after liquid nitrogen treatment. PM@Cur also exhibits surface hydrophobicity (contact angle >90°) for both water and organic solvents. These properties meet the mechanical, anti-fouling, and recyclable demands for hydrogel coolants. The antimicrobial assays in vitro confirmed that the inclusion of curcumin provided the PM@Cur with photodynamic antimicrobial capacity. Finally, the prepared PM@Cur hydrogel ice cubes have been confirmed to exhibit better anti-melting properties than traditional ice cubes, thus enabling the preservation of strawberries and shrimp. This study presents an innovative solution for producing advanced functional integrated hydrogels, offering a promising and safer option for food coolants.\\.

Comparative study of various molecular feature representations for solvation free energy predictions of neutral species

Predicting molecular properties with the help of Neural Networks is a common way to substitute or enhance comprehensive quantum-chemical calculations. One of the problems facing researchers is the choice of vectorization approach to representing the solvent and the solute for the estimator model. In this work, 10 different approaches have been investigated for both organic solute and solvent including vectorizers that relied on macroscopic parameters, functional groups classification, molecular graphs, or atomic coordinates. A variation of the Bag of Bonds approach called JustBonds, trained on the MNSol database, showed the best overall performance resulting in RMSD < 2 kcal/mol for the blind dataset that contains the solutes not presented in the training subset and < 1 kcal/mol on records from Solv@TUM database, which is close to contemporary continuum models. We have also demonstrated that the most important bags usually contain heteroatom and play a key role in the solvation process. Furthermore, the small role of solvent vectorization was demonstrated and revealed that approaches based on functional groups or macroscopic solvent parameters are often enough to efficiently represent solvent media.

Structural characterization of noni (Morinda citrifolia L.) pectin and its inhibitory activity on pancreatic lipase

This study aimed to investigate the physicochemical properties and biological activities of noni pectin (NP) extracted using various solvents, three fractions of noni pectin were obtained using traditional chemical and deep eutectic solvents. NPs are composed of various ratios of galacturonic acid, arabinose, rhamnose, xylose, glucose, and galactose with different yields, molecular weights, esterification degrees (DE), and microstructures. Among the fractions, noni pectin extracted with Betaine-citric acid (BNP) exhibited higher molecular weight, degree for esterification and pancreatic lipase (PL) inhibitory activity than the other fractions. Enzyme kinetic analysis indicated that BNP inhibited PL via a noncompetitive mechanism. BNP significantly altered the secondary structure of PL and quenched PL fluorescence, suggesting a static quenching mechanism. Isothermal titration calorimetry (ITC) further demonstrated that the binding of BNP to PL was spontaneous and driven by enthalpy, primarily mediated by hydrogen bonding and van der Waals forces. Molecular docking simulations also confirmed strong noncovalent interactions (hydrogen bonding and van der Waals forces) between BNP and PL. This study validated the high efficiency of the deep eutectic solvent-extracted noni pectin fraction in pancreatic lipase inhibition.

Biochemical Screening, In-vitro and In-silico Characterization of Citrullus colocynthis Fruit Extracts: A Combined Experimental and Computation Study.

Several medicinal plants are identified as therapeutic agents for the world's most deadly disease cancer. A member of the "Cucurbitaceae" family of medicinal plants, Citrullus colocynthis (C. colocynthis) has various pharmacological actions. In the present study we have focused on the phytochemical analysis, antimicrobial, anticancer and in silico investigation of fruit extracts of C. colocynthis. The chloroform, pure ethanolic and aq. ethanolic extracts of C. colocynthis whole fruit, peel and pulp separately have been investigated. The phytochemical analysis revealed the presence of alkaloids, flavonoids, steroids, phenols, saponins and glycosides in various parts of the fruit. Some compounds have been identified using GC-MS analysis by comparing with NIST library data. The antimicrobial activity of all extracts was checked by agar well diffusion method against five different bacterial strains such as A. baumannii, K. pneumonia, S. aureus, P. aeruginosa and E. coli. The zone of inhibition (ZOI) ranged between 11 mm to 27 mm against different strains. The polar solvent extracts (ethanolic and aq. ethanolic extract) of peel showed good sensitivity against all bacterial strains as compared to non-polar solvent (chloroform extract), which showed activity only against Staphylococcus aureus and Pseudomonas aeruginosa. The cytotoxic activity of C. colocynthis all extracts against human brain cancer cell lines (U-87) was assessed using MTT assay. The % cell viability of ethanolic (ET-PL), and aq. ethanolic extract of whole fruit and pulp showed promising results. The cancerous cell line U-87 seems to be more sensitive towards polar solvents (ethanolic and aq. ethanolic) pulp extracts than peel. Further, based on invitro results, compounds identified in ET-PP were screened for their potential as antibacterial and anticancer agents through molecular docking and MMGBSA studies. These studies strongly supported the in-vitro study results and identified new drug candidates.

Regioselective Synthesis of Cycloalkane-fused Pyrazolo[4,3-e]pyridines through Tandem Reaction of 5-aminopyrazoles, Cyclic Ketones and Electron-rich Olefins.

Pyrazolopyridines are interesting fused heterocyclic pharmacophores that combine pyrazole and pyridine; two privileged nuclei extensively studied and with a wide range of applications. They can be obtained by a broad variety of synthetic methods among which multicomponent reactions have gained importance, especially from 5-aminopyrazoles and dielectrophilic reagents. However, the search for new approaches more in tune with sustainable chemistry and the use of unconventional heating in three-component synthesis are open and highly relevant study fields. A novel, practical and efficient three-component synthesis of cycloalkane-fused pyrazolo[ 4,3-e]pyridines was developed through a tandem reaction of 5-aminopyrazoles, cyclic ketones and electron-rich olefins, using microwave induction in perfluorinated solvent and iodine as catalyst. The microwave-induced three-component approach applied in this work promoted the construction of 10 new pyrazolopyridines with high speed and excellent control of regioselectivity, favoring the linear product with good yields; where the versatility of electron-rich olefins in iodine-catalyzed cascade heterocyclizations, granted the additional benefit of easy isolation and the possibility to reuse the fluorous phase. Although pyrazolopyridines have been synthetically explored because of their structural and biological properties, most of the reported synthetic methods use common or even toxic organic solvents and conventional heating or multi-step processes. In contrast, this study applied a multicomponent methodology in a single step by microwave induction and with the versatility provided in this case by the use of perfluorinated solvent, which allowed easy isolation of the final product and recovery of the fluorous phase.

The effect of water on the crystallization of phytosterols and phytostanols in organic solutions

Phytosterols (C29H50O), also known as plant sterols and stanols, are valuable biomolecules with a variety of applications in the pharma, food, and cosmetics industries. Phytosterols are typically manufactured from vegetable oil and tall oil feedstocks through a cooling crystallization process. Depending on the feedstock used, the composition regarding individual phytosterols and phytostanols (saturated analogs of phytosterols), also varies to a large extent. In the current research it was observed that by adding a small amount of water to the organic solvent [i.e., n(water)/n(acetone) of 0.17, n(water)/n(ethanol) of 0.13, and n(water)/n(ethyl acetate) of 0.10], the final phytosterol profile regarding phytosterol and phytostanol concentrations can be modified. This can be explained by the different solubility behavior of phytosterols and phytostanols in the studied solvent systems, based on experimental results obtained from transmissivity measurements. Phytostanols have surprisingly low solubility when compared to phytosterols in all the studied solvent systems. However, in the presence of water, phytosterol solubility decreased more compared to phytostanols. To the best of our knowledge, this is the first time that phytostanol solubility has been systematically studied. Moreover, phytosterol and phytostanol concentrations in a crystallized product with varying binary solvent systems containing water has not previously been reported. The measured experimental solubility data correlated well with the studied solubility models (van't Hoff, modified Apelblat, Buchowski-Ksiazaczak (λh), and polynomial equations). Understanding the solubility behavior of phytosterols and phytostanols allows to optimize the crystallization process itself toward a broader raw material selection, and better yield and quality in the production of phytosterols from plant-based raw materials. In addition, these findings can potentially be further utilized in phytosterol formulations for various applications.

Effervescence-assisted dispersive liquid-liquid microextraction for the extraction and preconcentration of pesticide residues in fruit juice samples

BackgroundThe widespread use of pesticides for the protection of fruits has resulted in the presence of pesticide residue levels beyond their limit in fruits. This ensures their transfer to processed products, such as juices, posing a threat to human health. Therefore, an efficient and selective method is required for monitoring pesticide residues in fruit juices. Hence, an effervescence-assisted dispersive liquid-liquid microextraction based on solidification of floating organic droplets was developed for the simultaneous extraction of five pesticide residues of different classes. An environmentally green low-density organic solvent, 1-undecanol, was used as extraction solvent. (94) ResultsThe developed method was optimized and validated for quantitative extraction of multiclass pesticide residues at trace levels from fruit juice samples, including apple, pineapple, guava and orange samples. The method showed good linearity in the range of 0.8 to 300 ng mL-1 for all pesticide residues with a regression coefficient ranging from 0.9979 to 0.9997 under the optimized conditions. The LOD and LOQ of the method ranged between 0.03-0.16 ng mL-1 and 0.11-0.52 ng mL-1, respectively, indicating the high sensitivity of the proposed method. Repeatability and reproducibility, in terms of %RSD, were obtained in the range of 1.16-5.50% and 3.12-7.72%, respectively. (101) SignificanceThe developed method exhibited acceptable mean recoveries (%R) in the range of 73.77-113.34 % with %RSDs (n=3) ranging from 1.25 to 7.74% for all the analytes studied. Therefore, the developed method can be used as a selective, sensitive and efficient extraction method for the extraction of multiclass pesticides from fruit juice samples. (52)

Advanced pullulan nanofibers reinforced by cellulose fibrils as drug carriers for salicylic acid.

The goal of the current work is to showcase the synthesis of homogeneous pullulan nanofibers that are strengthened by the addition of cellulose nanofibrils (CNF). One of the main difficulties this study faced was determining the ideal water/organic solvent ratio for the electrospinning process, which would allow for the maximum reduction in the amount of organic solvent (DMF or DMSO) needed. The rheological behavior of electrospinning solutions was modulated by varying both, the pullulan concentration and solvent system composition. The amount of CNF in the composition significantly affects the properties of the created nanofibers. When the CNF content increased from 1 % to 5 %, the diameter of the fibers decreases from 284 nm to 90 nm. This is attributed to the enhanced conductivity and surface charge density of the solution jet. The as prepared nanofibres can hold a variety of drugs and can be used to create novel formulations for various biomedical purposes. The nanofibres were tested for salicylic acid incorporation and release. Drug release exhibited zero-order kinetics, suggesting that the concentration remained unaffected by the rate of release. Furthermore, the nanofibres demonstrated remarkable antibacterial activity against both Gram-positive and Gram-negative bacteria.

Development and validation of extraction and clean-up procedures for UPLC-MS/MS analysis of aflatoxins in spices.

UPLC-MS/MS analytical conditions for the analysis of aflatoxins in spices were optimized and validated in this study. Liquid-liquid partition-based protocols for the cleaning up of extracts using common organic solvents such as acetonitrile, hexane, and ethyl acetate were developed and validated. The developed liquid-liquid partition methods were compared with immuno-affinity column and QuEChERS clean-up methods for the UPLC-MS/MS analysis of aflatoxins in 8 spices. The reduction of lipophilic components using the partition with hexane is particularly useful in spices like red pepper that have higher levels of fatty acids, carotenoids, sterols, triterpenoids, etc. The subsequent partitioning with ethyl acetate considerably reduced the matrix interference from the polar components and increased the sensitivity. The cleaning up of spice extracts using liquid-liquid partition techniques resulted in limits of quantification (LOQ) of 2-5 µgL-1 in UPLC-MS/MS analysis. Trueness, repeatability, and reproducibility of the methods were in acceptable ranges. The accuracy of the developed methods was further verified by analyzing aflatoxins in naturally incurred samples of spices and comparing the results with those obtained from the immuno-affinity column cleanup-HPLC-FD method.

Effects of the use of acetone as co-solvent on the financial viability of bio-crude production by hydrothermal liquefaction of CO2 captured by microalgae

Hydrothermal Liquefaction (HTL) is a promising technology to produce biocrude from microalgal biomass that has captured gaseous CO2. However, several problems of this technology must still be solved to make it economically and technically feasible. One of the main problems in the financial viability of the HTL process is the low yield obtained when only water is used as a solvent, with results close to or lower than 30 wt%. This, in turn, increases the production cost to over 120 USD/BBL. In recent years, some authors have focused their efforts on increasing biocrude production through the extensive use of organic solvents, without considering the effects on economic viability. The present work evaluated the financial effect of using acetone as an organic co-solvent, finding that high acetone contents increased operating costs of the process, mainly due to losses in its handling and recovery. On the contrary, very low acetone contents had very little effect on the biocrude yield. It was possible to establish that concentrations close to 5 wt% of acetone, mixed with water, resulted in a yield of about 60 wt% and a production cost of 50 USD/BBL of biocrude, with an energetic densification of 30.25 MJ/kg and 8.60∘ API, classifying it as heavy crude, which makes it necessary to include refining processes for heteroatom removal. Chemical characterization of biocrude revealed a high content of nitrogenous compounds (23.6 wt%) and oxygenated compounds (10.7 wt%), which have to be removed for the subsequent production of commercial liquid fuels. It is concluded that the use of a water-acetone mixture allows for obtaining positive operating profits, which helps to the high capital costs involved in this type of technology, making it more financially comparable with the conventional petroleum industry.

Construction of multi-functional silicone rubber/reduced graphene oxide/multi-walled carbon nanotube composites with segregated structure by surfactant-free Pickering emulsion method

Polymer composites with segregated structure (PC–S) have the advantages of low filler usage and excellent functionality. Emulsion blending combined with direct molding technology is the main method for the preparation of PC-S. However, due to the high fluidity of low-viscosity silicone rubber (SR), PC-S cannot be prepared by this technique. In addition, surfactants affect the heat resistance of the final SR composites (SRC). In order to solve the above problems, in this study, a Pickering emulsification combined with pre-crosslinking technology for SR was successfully developed by using graphene oxides (GO)/multi-walled carbon nanotubes (MWCNTs) hybrid fillers (GM) as emulsifiers, and SR/reduced GO (RGO)/MWCNTs composites with segregated structure (SSGM) were prepared. When RGO content is 4.5 wt%, MWCNTs content is 3.2 wt%, SSGM shows the highest electrical conductivity of 12.5 S/m, the highest electromagnetic interference shielding efficiency (EMI SE) of 41.4 dB, and an excellent flame retardant performance. The whole preparation process avoids the use of organic solvents and surfactants, which reduces the production cost of SSGM and the environmental pollution, and provides a feasible preparation route for the industrialized production of SSGM.

Gel Composite Membrane with Tannic Acid/Ferric Ion Separation Layer for Organic Solvent Nanofiltration

Gel Composite Membrane with Tannic Acid/Ferric Ion Separation Layer for Organic Solvent Nanofiltration

Color and functionality construction of cellulose towels with biological Monascus pigment based on a nano-suspension system

As a sanitary textile that directly contacts sensitive parts of the human body, such as mouth, nose and eyes, towel is very important for our daily life and health. However, the colored cellulose towels we use daily are dyed with synthetic dyes. This can be a problem for people with sensitive skin, particularly babies. In this research, cellulose towel fabric was dyed using a nano-level Monascus pigment dyeing solution, which eliminated the need for organic solvent to dissolve the pigment, making it an environmentally friendly dyeing scheme. After 90 °C pre-mordanting treatment and 80 °C dyeing for 30 min respectively, the K/S value of towel fabric could reach 9. In addition, the washing fastness of dyed towel fabric was 3–4, the dry/wet friction fastness was 4–5 and 3–4, and the K/S value remained high even after 20 washing times, and also demonstrated a certain level of UV resistance and antibacterial properties. In conclusion, the application of the dyeing method for cellulose towel fabric with biological Monascus pigment based on a nano-suspension system was found to be both efficient and environmentally friendly, which was anticipated to replace certain traditional synthetic dyes in the future.

On-site extraction of phenoxycarboxylic acid herbicides in environmental waters utilizing monolith-based in-tip microextraction technique

On-site extraction plays a significant role in the reliable quantification of strong polar phenoxycarboxylic acid herbicides (PCAs) in aqueous samples. In current study, a new technique for the field sample preparation of PCAs was developed by means of three channels in-tip microextraction device (TCIM). To capture PCAs effectively, an extraction phase based on monolith (EPM) using vinylimidazole and divinylbenzene/ethylene dimethacrylate as monomer and cross-linkers, respectively, was in-situ synthesized in pipette tips. The EPM fabricated at optimal conditions were characterized by a series of techniques and employed as the adsorbent of TCIM for the on-site extraction of PCAs. The adsorption isotherm was studied so as to inspect the extraction behaviors of EPM towards PCAs. Results revealed that the proposed EPM/TCIM presented satisfactory extraction performance towards PCAs through multiple interactions. The enrichment factors and adsorption capacity were 74-277 and 20 mg/g, respectively. Under the most beneficial extraction parameters, the developed EPM/TCIM was successfully employed to on-site extract PCAs, and then combining with HPLC equipped with diode array detector to monitor trace PCAs in actual waters. The limits of detection (LODs) towards investigated PCAs varied from 0.071 μg/L to 0.30 μg/L. In addition, the accuracy of established approach was inspected with documented method. Compared with existing lab-based sample preparation approaches, the introduced field sample preparation technique exhibits some merits such as avoidance of transporting large volume of water, prevention of analytes loss during sampling procedure, less usage of organic solvent and achievement of satisfactory efficient in sample preparation.