Oblique Angle Research Articles

Research on Dynamic Pig Counting Method Based on Improved YOLOv7 Combined with DeepSORT.

A pig inventory is a crucial component of achieving precise and large-scale farming. In complex pigsty environments, due to pigs' stress reactions and frequent obstructions, it is challenging to count them accurately and automatically. This difficulty contrasts with most current deep learning studies, which rely on overhead views or static images for counting. This research proposes a video-based dynamic counting method, combining YOLOv7 with DeepSORT. By utilizing the YOLOv7 network structure and optimizing the second and third 3 × 3 convolution operations in the head network ELAN-W with PConv, the model reduces the computational demand and improves the inference speed without sacrificing accuracy. To ensure that the network acquires accurate position perception information at oblique angles and extracts rich semantic information, we introduce the coordinate attention (CA) mechanism before the three re-referentialization paths (REPConv) in the head network, enhancing robustness in complex scenarios. Experimental results show that, compared to the original model, the improved model increases the mAP by 3.24, 0.05, and 1.00 percentage points for oblique, overhead, and all pig counting datasets, respectively, while reducing the computational cost by 3.6 GFLOPS. The enhanced YOLOv7 outperforms YOLOv5, YOLOv4, YOLOv3, Faster RCNN, and SSD in target detection with mAP improvements of 2.07, 5.20, 2.16, 7.05, and 19.73 percentage points, respectively. In dynamic counting experiments, the improved YOLOv7 combined with DeepSORT was tested on videos with total pig counts of 144, 201, 285, and 295, yielding errors of -3, -3, -4, and -26, respectively, with an average accuracy of 96.58% and an FPS of 22. This demonstrates the model's capability of performing the real-time counting of pigs in various scenes, providing valuable data and references for automated pig counting research.

Clutch model for focal adhesions predicts reduced self-stabilization under oblique pulling

Cell-matrix adhesions connect the cytoskeleton to the extracellular environment and are essential for maintaining the integrity of tissue and whole organisms. Remarkably, cell adhesions can adapt their size and composition to an applied force such that their size and strength increases proportionally to the load. Mathematical models for the clutch-like force transmission at adhesions are frequently based on the assumption that mechanical load is applied tangentially to the adhesion plane. Recently, we suggested a molecular mechanism that can explain adhesion growth under load for planar cell adhesions. The mechanism is based on conformation changes of adhesion molecules that are dynamically exchanged with a reservoir. Tangential loading drives the occupation of some states out of equilibrium, which for thermodynamic reasons, leads to the association of further molecules with the cluster, which we refer to as self-stabilization. Here, we generalize this model to forces that pull at an oblique angle to the plane supporting the cell, and examine if this idealized model also predicts self-stabilization. We also allow for a variable distance between the parallel planes representing cytoskeletal F-actin and transmembrane integrins. Simulation results demonstrate that the binding mechanism and the geometry of the cluster have a strong influence on the response of adhesion clusters to force. For oblique angles smaller than about 40∘, we observe a growth of the adhesion site under force. However this self-stabilization is reduced as the angle between the force and substrate plane increases, with vanishing self-stabilization for normal pulling. Overall, these results highlight the fundamental difference between the assumption of pulling and shearing forces in commonly used models of cell adhesion.

Numerical investigation on the behaviour of concrete barriers subjected to vehicle impacts using modified K&C material model

Full-scale experimental crash tests are important to determine the occupant risk factors and understand barrier system behaviour in vehicle-barrier impacts. Due to the expensive and time-consuming nature of such crash tests, finite element simulations of full-scale crash tests to analyse and design road safety structures have gained popularity as a more practical method of assessment. In this research, a simplified simulation technique was employed by dividing the barrier system into two sections called the Impact Zone and the Rigid Zone, which was adopted for concrete crash barriers for the first time. A previously performed experimental crash test was used to successfully validate the numerical model. The numerical crash model accurately predicted the critical parameters of the barrier performance. The numerical simulation was further used to extract otherwise difficult or impossible results from the experimental crash test, such as internal energies and exit angles. The importance of the use of optimised Karagozian and Case concrete material parameters was demonstrated through a parametric study carried out with autogenerated parameters. A parametric study performed with impact speed and angle proved that increased speed is more harmful for occupants than a more oblique impact angle. The potential benefits of replacing traditional concrete with improved energy absorbing concrete to reduce occupant risks were also investigated. The comparison of results between the numerical models and experimental crash test confirms the trustworthiness of the developed models to simulate the vehicle-barrier crashes for analysing existing barrier designs and further developing new barrier designs to increase road safety.

Investigation on the Mechanical Characteristics of the Excavation of a Double-Line Highway Tunnel Underpass Existing Railway Tunnel under the Influence of Dynamic and Static Load

Research on the excavation mechanical properties of underpass tunnels has already had certain results, but only a few of them consider the effects of dynamic and static loads on the excavation mechanical properties of underground tunnels at the same time; particularly, there is a lack of research investigating double-line highway tunnels with angled underpasses of existing railway tunnels. In this paper, based on the tunnel project of the new double-line Shiqian Highway Tunnel passing under the Hurong Railway with an oblique angle, based on the method of over-advance geological prediction and investigations into the palm face surrounding the rock, the rock degradation caused by dynamic and static loads is quantified using the perturbation system. Additionally, the mechanical parameters of the rock under the influence of dynamic and static load coupling in the influence area of the cross-tunneling project are determined using the Hoek–Brown criterion, and the mechanical characteristics of the excavation of a tunnel under the double-lane highway tunnel passing under the existing railroad are constructed with the mechanical characteristics of the double-lane highway tunnel, taking into consideration the influence of the dynamic and static load coupling in a three-dimensional model. The results show that, in line with the new tunnel rock movement law for the top of the arch sinking, the bottom plate bulging, the side wall outward movement, the height and width of the arch, and the bottom plate arch show an increase with the tunnel excavation, while the side wall rock displacement effect is smaller; the left and right line tunnel disturbed area of the rule of change is similar; the existing tunnel bottom plate displacement is larger than the top plate and the left and right side wall, under the influence of the excavation time step. Typical profile point displacement is mainly determined by the distance from the excavation surface; von Mises stress extremes are observed in the top plate and side walls of the existing tunnel, which occur in the tunnel structure, and there are unloading and pressure-bearing zones in the bottom plate; the new tunnel has the same rock disturbance angle under the four calculation conditions and, based on the displacement control criterion, the excavation method is preferred and the upper and lower step blasting excavation method is recommended.

Trajectory prediction of rigid projectile for oblique penetration into multi-layer aluminum targets

Multi-layer targets and nonideal initial conditions significantly increase the complexity of penetration trajectory prediction. To address this issue, a general multi-layer target trajectory model was developed based on expanding spherical cavity in layered finite targets, comprising the wake separation and finite free-surface effects. The trajectory prediction model adopted the developed geometric description of the ogive- and conical-nosed projectiles, combined with the proposed transfer functions and plane motion equation. Experiments of the two types projectiles penetration into layered 2A12 aluminum targets were conducted, and the actual projectile trajectories in targets were obtained through the section scan method. The predicted trajectories aligned well with the experimental data within the application range. The layering effect considerably influences the projectile trajectories impacting at higher velocities and oblique angles. More layers reduce the resistance of the targets, increasing the penetration but reducing the angle deflection of the trajectory performance. Compared with the ogive projectile, the conical projectile exhibited a deeper penetration and improved anti-deflection capabilities. This preliminary study on penetration trajectory characteristics of multi-layer targets provides experimental and theoretical support for correcting penetration trajectories.

Preparation of a double-layer bionic bamboo structure absorber based on CB/PLA-TPU composites and its broadband microwave absorption characteristics

The study of the mechanical characteristics and microwave absorption capabilities of multifunctional composite materials in complex environments has attracted considerable interest in recent years. Inspired by the structure of bamboo in nature, a novel double-layer microwave absorber structure, a CB/PLA-TPU composite bionic bamboo joint’s structure, was conceived and manufactured for this investigation. This structure ingeniously integrates the load-bearing attributes of bamboo joints with the microwave absorption qualities of CB composites. At the material level, enhancing the CB particle content enhances the matrix's folds and defects, thereby improving its dielectric polarization loss capacity. An effective absorption bandwidth of 3.84 GHz was achieved, with a minimum reflection loss of −60.24 dB at a 2.58 mm thickness and a 9.2 GHz frequency. The bionic bamboo absorber's unit structure is meticulously engineered, with experimental simulations validating its performance. According to the findings, the structure attains a 10.03 GHz broadband absorption and a yield strength of 11.6 MPa. It maintains broadband absorption capabilities above 9 GHz even at oblique incidence angles for TM polar wave (0–60°) and TE polar wave (0–30°). The biomimetic design based on bamboo offers significant potential for engineering applications in stealth technology under adverse conditions.

Design, optimization, and comparative analysis of wide-band polarization conversion along with dual coding sequences for RCS reduction

In this paper, a wideband polarization conversion metasurface is designed. Additionally, coding and chessboard metasurfaces are specifically tailored for radar cross-section reduction (RCS). Initially, a compact unit cell demonstrating exceptional polarization conversion performance is introduced, achieving a polarization conversion ratio (PCR) exceeding 90%\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\%$$\\end{document} across frequencies ranging from 7.9 to 22.7 GHz. The PCR remains effective even when oblique incidence angles of up to 30∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^\\circ$$\\end{document} are utilized across this frequency band. Roger RT5880, with a thickness of 0.254 mm, serves as the substrate. An airgap is introduced between the substrate and the ground plane to enhance the polarization conversion bandwidth. This unit cell serves as the fundamental building block for subsequent metasurface configurations. To assess the scalability and effectiveness, a 36 ×\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ imes$$\\end{document} 36 unit array is assembled, confirming efficient polarization conversion capabilities extending to larger structures. Moreover, a 1-bit coding unit “0” and “1” are formed by the Pancharatnam-Berry phase based on the same-sized meta-atom with 90∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^\\circ$$\\end{document} orientations. The robustness and practicality of the design are demonstrated by creating 12 ×\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ imes$$\\end{document} 12 lattices and evaluating their RCS reduction potential under two distinct scenarios: a chessboard pattern and a coding-based scheme. Notably, its results indicate substantial RCS reduction across a broad frequency spectrum (7.9 to 22.7 GHz) for both configurations. This study demonstrates the wide-ranging applicability of metasurface design, making it a valuable contribution to the fields of microwave engineering, polarization control, and radar stealth technology. Owing to its simplicity, bandwidth, and versatility, this approach offers innovative solutions for diverse real-world applications.

Angle-corrected GPR hyperbolic fitting models for improved parameter estimation

Ground-penetrating radar (GPR) is commonly employed as a non-destructive technique for detecting subsurface cylindrical objects such as pipes, cables, rebars, and tree roots. Hyperbolic features generated in GPR radargrams are often used to estimate key parameters like burial depth, object radius, and electromagnetic wave velocity. However, traditional approaches frequently rely on the assumption that GPR traverses are perpendicular to the alignment of target—an assumption or a negligence that is not always valid in real-world scenarios. To address this limitation, a novel method is introduced for simultaneously estimating the orientation and burial depth of pipes, as well as wave velocity, from the hyperbolic patterns observed in GPR data. The method innovates by incorporating an angle correction index into the classical hyperbolic fitting model. This modified model is then formulated as an optimization problem, which is solved using a hybrid approach combining the Multi-Verse Optimizer (MVO) and Gradient Descent (GD) algorithms. A unique index, termed the “C-value,” is introduced to quantitatively analyse the influence of oblique angles on the hyperbolic fitting models. Two distinct fitting models are validated through both simulation and field experiments. The study also scrutinizes the impact of varying pipe radius and burial depth on the accuracy of parameter estimation at different pipe orientation. The methodology presented herein enables the simultaneous estimation of burial depth, wave velocity, and pipe orientation directly from hyperbolic fitting—a significant advancement, as orientation is typically assumed as a known input yet is often challenging to ascertain obtain in practical field situations.

The influence of tympanic-membrane orientation on acoustic ear-canal quantities: A finite-element analysis.

Assuming plane waves, ear-canal acoustic quantities, collectively known as wideband acoustic immittance (WAI), are frequently used in research and in the clinic to assess the conductive status of the middle ear. Secondary applications include compensating for the ear-canal acoustics when delivering stimuli to the ear and measuring otoacoustic emissions. However, the ear canal is inherently non-uniform and terminated at an oblique angle by the conical-shaped tympanic membrane (TM), thus potentially confounding the ability of WAI quantities in characterizing the middle-ear status. This paper studies the isolated possible confounding effects of TM orientation and shape on characterizing the middle ear using WAI in human ears. That is, the non-uniform geometry of the ear canal is not considered except for that resulting from the TM orientation and shape. This is achieved using finite-element models of uniform ear canals terminated by both lumped-element and finite-element middle-ear models. In addition, the effects on stimulation and reverse-transmission quantities are investigated, including the physical significance of quantities seeking to approximate the sound pressure at the TM. The results show a relatively small effect of the TM orientation on WAI quantities, except for a distinct delay above 10 kHz, further affecting some stimulation and reverse-transmission quantities.

Ultrasonic detection method based on flexible capillary water column arrays coupling

Conventional water immersion ultrasonic testing faces limitations due to factors such as environmental conditions, workpiece dimensions, corrosion, and resource wastage. Contact-based coupling methods, which employ coupling media or specific coupling structures, offer a convenient approach to coupling acoustic waves and reduce signal attenuation. However, these methods are time-sensitive and lack adaptability to uneven surfaces, particularly when dealing with workpieces featuring subtle undulations, resulting in significant signal decay. This paper presents an ultrasonic coupling method based on a flexible capillary water column array. By employing a stable and flexible water column array within the micro-channels as the coupling medium, stable contact-based transmission of ultrasonic signals is achieved. The influence of water column array unit dimensions and array structures is explored through theoretical analysis and experimentation, demonstrating lower energy attenuation compared to reductions in water column area. Notably, the tests revealed the method’s adaptability at oblique angles below 20 degrees, which surpasses the performance of submerged detection at similar angles. This research presents an innovative and stable approach for contact-based ultrasonic coupling testing, particularly in scenarios involving dynamic contact scanning between ultrasonic waves and workpieces.

Characteristics of Emission Non-nulling Pulsars Through Simulation

We investigate the population and several properties of radio pulsars whose emission does not null (non-nulling) through simulation of a large pulsar sample. Emission from a pulsar is identified as non-nulling if (i) the emission does not cease across the whole pulse profile, and (ii) the emission is detectable. For (i), we adopt a model for switching in the plasma charge density, and emission persists if the charge density is non-zero. For (ii), we assume that detectable emission originates from source points where it is emitted tangentially to the magnetic field-line and parallel to the line-of-sight. We find that pulsars exhibiting non-nulling emission possess obliquity angles with an average of 42.°5, and almost half the samples maintain a duty cycle between 0.05 and 0.2. Furthermore, the pulsar population is not fixed but dependent on the obliquity angle, with the population peaking at 20°. In addition, three evolutionary phases are identified in the pulsar population as the obliquity angle evolves, with the majority of samples having an obliquity angle between 20° and 65°. Our results also suggest that emission from a pulsar may evolve between nulling and non-nulling during its lifetime.

Novel enhanced thermal capabilities of Cu-Al2O3/water hybrid nanofluid in an oblique U-shape cavity: On the molecular behaviour through vorticity analysis

This paper presents the numerical investigation of natural convection heat transfer of copper-alumina/pure water hybrid nanofluid in an oblique U-shaped enclosure. The dimensionless governing equation is formed in the stream function-vorticity formulation using dimensionless variables. The Galerkin weighted residual finite element method with the damped Newton-Raphson iteration method is applied to the problem. The heat transfer performance for the system is investigated by varying the Rayleigh numbers, nanoparticle volume fractions and their ratios, and the oblique angles of the enclosure. The fluid flow, heat transfer, and vorticity analysis are conducted extensively for the Rayleigh number up to 106. It was found that the oblique enclosure dwindled the overall heat transfer performance. Correspondingly, the maximum vorticity is at the lowest with zero obliquenesses. The results are used to gain a deeper understanding of the fluid flow and thermal behaviour of the system to achieve more sustainable and greener energy management.

Validation of Advanced Kinematic Model of Earth-Moon System by Observed Length of Day Curve

NASA’s press release of ‘Moon having receded by 1 m from Earth in a quarter of century’ on the Silver Jubilee Anniversary (20 July 1994) of Man’s landing on Moon led to the development of the Kinematic Model(KM) of evolving Earth-Moon System. Best fit KM parameters are adopted for the analysis of evolving E-M system, The present length of day of Earth is assumed to be 24 hours, orbital period of Moon divided by spin period of Earth=LOM/LOD=27.322 and the age of Moon=4.467Gy. Using this best fit model parameters the velocity of recession of Moon is derived as 2.3cm/y as compared to 3.7cm/y by Lunar Laser Ranging experiment.KM is used to plot lengthening of day(LOD) curve from pre-cambrian period (2.5Gy ago) to the present time. This theoretical plot is superimposed on the observed lengthening of day curve. The observed plot is generated from the observed length of day in different geologic epochs by John West Wells, Charles P.Sonnet & Chan and Kaula & Harris by the study of coral fossils, ancient tidalites and marine creatures respectively. The superposition gives more than 25% mismatch in remote past around 2.5Gya. This KM did not consider the obliquity angle 23.44° of Earth and the inclination angle of 5.14° of Lunar Orbital Plane with respect to Ecliptic plane. The classical KM assumed monotonic spiral expansion of Moon from Earth as shown in Figure 1. A recent paper “Tidal evolution of Moon in high angular momentum, high obliquity Earth” has revolutionized the Earth-Moon modeling and paved the way for near-match between observated and theoretical LOD curve. In the new scenario Moon’s tidal evolution is anything but sedate and monotonic. It experienced a bumpy launch through gravitational sling shot at the first geo-synchronous orbit of 15,000Km. Moon was gravitationally catapulted and launched on an expanding spiral path but this expansion was turbulent, chaotic and got stalled at times due to huge lunar obliquity tides during Laplace Plane transition and due to Cassini state transition as shown in Figure 2. Only after Moon settles down in Cassini state II that it resumes its monotonic and sedate spiral expansion as envisaged in the classical picture but this spiral expansion was at accelerated pace so as to reach 3,84,499Km orbital radius in 4.5Gy. It transits in fits , in chaotic and turbulent phase, for 3.3Gy whereas it spends1.2Gy in bounded state therefore this new model is referred to as ‘Fits and Bound’ model of E-M system. On this time scale the modern time recession rate comes to be 3.7cm/y. If this accelerated time frame is adopted then we get near-exact match between theory and observed LOD curve with worst mis-match being -4%. In this accelerated time frame, all E-M system parameters are obtained and it is self consistent model with velocity of recession = 3.7cm/y, LOM/LOD = 27.322 and near match between theory and observed LOD curve and spending 3.3Gy in turbulent and stalled evolutionary phase and spending 1.2Gy in the present accelerated phase. This gives the final vindication to the advanced KM.

A 2D video-based assessment is associated with 3D biomechanical contributors to dynamic knee valgus in the coronal plane.

Adolescent athletes involved in sports that involve cutting and landing maneuvers have an increased risk of anterior cruciate ligament (ACL) tears, highlighting the importance of identifying risky movement patterns such as dynamic knee valgus (DKV). Qualitative movement screenings have explored two-dimensional (2D) scoring criteria for DKV, however, there remains limited data on the validity of these screening tools. Determining a 2D scoring criterion for DKV that closely aligns with three-dimensional (3D) biomechanical measures will allow for the identification of poor knee position in adolescent athletes on a broad scale. The purpose of this study was to establish a 2D scoring criterion that corresponds to 3D biomechanical measures of DKV. A total of 41 adolescent female club volleyball athletes performed a three-task movement screen consisting of a single-leg squat (SLS), single-leg drop landing (SLDL), and double-leg vertical jump (DLVJ). A single rater scored 2D videos of each task using four criteria for poor knee position. A motion capture system was used to calculate 3D joint angles, including pelvic obliquity, hip adduction, knee abduction, ankle eversion, and foot progression angle. Receiver operating characteristic curves were created for each 2D scoring criterion to determine cut points for the presence of movement faults, and areas under the curve (AUC) were computed to describe the accuracy of each 2D criterion compared to 3D biomechanical data. 3D measures indicated knee abduction angles between 2.4°-4.6° (SD 4.1°-4.3°) at the time point when the center of the knee joint was most medial during the three tasks. AUCs were between 0.62 and 0.93 across scoring items. The MEDIAL scoring item, defined as the knee joint positioned inside the medial border of the shoe, demonstrated the greatest association to components of DKV, with AUCs ranging from 0.67 to 0.93. The MEDIAL scoring criterion demonstrated the best performance in distinguishing components of DKV, specifically pelvic obliquity, hip adduction, ankle eversion, and foot progression. Along with the previously published scoring definitions for trunk-specific risk factors, the authors suggest that the MEDIAL criterion may be the most indicative of DKV, given an association with 3D biomechanical risk factors.

The tipping point in medial opening wedge high tibial osteotomy relates to the shape of the proximal tibia more than to lower limb alignment correction.

The tipping point (TP) of the knee joint isthe centre of rotation of the joint in the coronal plane. This study aimed to define the TP in medial opening wedge high tibial osteotomy (MOWHTO). Data from 154 consecutive patients with varus knee malalignment, who underwent MOWHTO between 2017 and 2021, was retrospectively reviewed. The degree of preoperative osteoarthritis (OA), using the Kellgren-Lawrence (KL) grading system,was recorded. Long-leg standing radiographs were used to record the alignment parameters, including the hip-knee-ankle angle (HKA), the mechanical lateral distal femoral angle (mLDFA), the medial proximal tibial angle (MPTA), the joint line convergence angle (JLCA) and the joint line obliquity (JLO) angle. Postoperative Tegner activity scores, Western Ontario and McMaster University Scoresand patients'satisfaction were recorded. To define the TP, the relationship of all variables to Δ JLCA (absolute difference between preoperative to postoperative JLCA values) was analysed. Linear regression was employed for Δ JLCA to preoperative JLCA and postoperative and Δ MPTA (absolute difference between preoperative and postoperative values). K-means clustering was used to partition observations into clusters, in which each observation belongs to the cluster with the nearest mean serving as a prototype of the cluster, and analysed if there was any specific threshold influencing Δ JLCA. After defining the TP, further subanalysis of the TP based on the preoperative KL OA grade and analysis of variance of this TP to the KL OA grade was performed. A total of 154 patients (77.9% males and 22.1% females) were included. The mean age was 48.2 ± 11 years, and the mean body mass index was 27.1 ± 4 kg/m2. Preoperatively, 26 (16.9%) patients had KL grade IV OA. The mean preoperative and postoperative JLCA and the significance of their relation to Δ JLCA were 2.6° ± 1.8° (p < 0.0001) and 1.9° ± 1.8° (p = 0.6), respectively. The mean Δ JLCA was 1.4° ± 1.5°. The mean pre- and postoperative MPTA and the significance of their relation to Δ JLCA were 84.6 ± 2.2 (p = 0.005) and 91.8 ± 2.5 (p < 0.0007), respectively. The mean Δ MPTA was 7.2 ± 2.3 (p = 0.3). The mean preoperative and postoperative HKA and the significance of their relation to Δ JLCA were 174.6 ± 2.5 (p = 0.2) and 181.9 ± 2.4 (p = 0.7), respectively. The overall linear regression for Δ JLCA was statistically significant for preoperative JLCA (R2 = 0.3, p < 0.0001) and postoperative MPTA (R2 = 0.09, p = 0.0001) and statistically insignificant for Δ MPTA (R2 = 0.01, p = 0.2)and postoperative HKA (R2 = 0.04, p = 0.7). MPTA > 91.5° was the optimal threshold dividing this series data set between substantial and nonsignificant Δ JLCA. In this study, the main predictive factors for intra-articular correction (Δ JLCA) after MOWHTO were the preoperative value of JLCA and the postoperative value of MPTA. A value of 92° for postoperative MPTA is potentially the optimal threshold to predict intra-articular correction. Level IV, retrospective cohort study.

Tunneling Effect of Fermions in Silicene Through Potential Barrier

AbstractThe influence of a a rectangular potential barrier on the quantum transport of fermions in silicene is explored. Specifically, analytical solutions are presented to derive transmission and reflection probabilities together with conductance. It is shown that the transmission is highly sensitive to both the barrier height and incident energy. As a result, the occurrence of Klein and resonant tunnelings is observed, with a significant dependence on the barrier width. Notably, it is found that perfect transmission extends beyond normal incidence, occurring at various oblique angles. Moreover, the transmission pattern exhibits a more fragmented structure with increasing barrier width, reminiscent of Fabry‐Pérot resonances. In contrast, the conductance displays a non‐monotonic dependence on incident energy and features rapid oscillations with a rising barrier height. However, at a constant barrier height, there is a minimal disparity among conductance profiles for high incident energy values. When incident energy equals the barrier height, the conductance experiences a local minimum. For a thin barrier, a substantial reduction in conductance is observed, unlike the oscillatory behavior seen with a thicker barrier. These findings underscore the progress in silicene research and offer a fresh perspective on the relativistic applications of tunneling in this material.

A double-layered C-band frequency-selective surface bandstop filter for maritime communication

ABSTRACT In this paper, a dual-bandstop frequency-selective surface (FSS) implemented using a four-legged Minkowski square and s hexagonal ring is presented. The proposed FSS shows dual stopbands at 4.9 GHz and 7.1 GHz in the C band. The size of the unit cell is 0.36λ0 × 0.36λ0, which is designed on an FR4 substrate with a thickness of 1.6 mm and a loss tangent of 0.02. The frequency response of the bandstop FSS is verified using circuit simulation, and its optimised dimensions are determined at the desired frequencies of operation. The results reveal that the ratio of the two stopband frequencies can be adjusted over a wide range by properly selecting the geometrical parameters. The impedance bandwidths for S11< –10 dB of 0.9 GHz and 1 GHz have been realised at the lower and upper frequency bands, respectively. A prototype is fabricated and measurements show a reasonable agreement with the simulated results, thus validating the design concept. It has been shown that the proposed bandstop FSS exhibits excellent stability upto 60° at oblique incident angles in both TE and TM polarisations. This FSS is suitable for C-band maritime applications due to wide stopbands and highly stable angular operation.

Microwave absorption performance for Cu, Co, and Ti co-doped SrFe12O19 as a function of incident angle

Microwave-absorbing materials (MAMs) are essential for mitigating the unwanted effects of electromagnetic interference and microwave pollution. MAMs are also used in 5G technology, energy harvesting, information security, and military technology (such as reduced radar cross-section). In this work, SrFe12–2xCux/2Cox/2TixO19 samples, prepared by using a ball mill and heat treatment method, showed their superior microwave dissipation features in both effective absorption bandwidth (EAB) and reflection loss (RL) values for the microwave incident angle of 0°, where EAB and RL values reached 15.90 GHz and −42.86 dB, respectively. The optimum RL values would change with the variation of the incident microwave angle. RL values at a specific oblique angle could exhibit better RL values for both transverse electric (TE) and transverse magnetic (TM) polarization modes, except for the x = 0.15 (SrM15) sample for TE mode. In detail, the x = 0 (SrM0) sample achieved the lowest RL value of −71.28 dB for the incident angle of 20° in the TE polarization mode, which was much better than that of the normal incident. The RL of the SrM15 sample in TM mode was significantly enhanced and reached a value of −66.48 dB for an incident angle of 10°. The increase in the RL values resulted from the superior values of complex permittivity and permeability and their matching. In addition, the improvement in RL values could be attributed to the increase in incident and refraction angles as well as the longer pathway of the microwave inside the samples. These discoveries also illustrate that SrFe12–2xCux/2Cox/2TixO19 samples hold promise for various everyday applications, even when exposed to oblique angle variation.

Design and Modeling of a Miniaturized Multilayer Metamaterial Absorber With Oblique Angle and Polarization Insensitivity

Design and Modeling of a Miniaturized Multilayer Metamaterial Absorber With Oblique Angle and Polarization Insensitivity

Effect of TiN thin films deposited by oblique angle sputter deposition on sol-gel coated TiO2 layers for photocatalytic applications

TiO2 monolayer and TiN/TiO2 bilayer coatings were deposited on soda-lime glass prepared by mixing two techniques, TiO2 was deposited by sol-gel dip-coating and TiN film was deposited by oblique angle deposition using reactive magnetron sputtering at α=45° Structural analysis showed typical peaks of TiO2 anatase phase and cubic (Na-Cl type) structure of TiN. Roughness value of 3 nm was obtained for the TiN/TiO2 bilayer film with a rise and elongated grains size. It was found that the optical band gap energy decreases after coupling the TiN sub-layer which is explained by the incorporation of N atoms into TiO2 structure. At constant UV irradiation time, the photo-degradation of methylene blue rate increased for TiN/TiO2 film by 4 % compared to TiO2 film.