Abstract
TiO2 monolayer and TiN/TiO2 bilayer coatings were deposited on soda-lime glass prepared by mixing two techniques, TiO2 was deposited by sol-gel dip-coating and TiN film was deposited by oblique angle deposition using reactive magnetron sputtering at α=45° Structural analysis showed typical peaks of TiO2 anatase phase and cubic (Na-Cl type) structure of TiN. Roughness value of 3 nm was obtained for the TiN/TiO2 bilayer film with a rise and elongated grains size. It was found that the optical band gap energy decreases after coupling the TiN sub-layer which is explained by the incorporation of N atoms into TiO2 structure. At constant UV irradiation time, the photo-degradation of methylene blue rate increased for TiN/TiO2 film by 4 % compared to TiO2 film.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.