Specular Neutron Reflectivity Research Articles

Multilayering of Calcium Aerosol-OT at the Mica/Water Interface Studied with Neutron Reflection: Formation of a Condensed Lamellar Phase at the CMC.

Using specular neutron reflection, the adsorption of sodium and calcium salts of the surfactant bis(2-ethylhexyl) sulfosuccinate (Aerosol-OT or AOT) has been studied at the mica/water interface at concentrations between 0.1 and 2 CMC. The pH dependence of the adsorption was also probed. No evidence of the adsorption of Na(AOT) was found even at the critical micelle concentration (CMC) while the calcium salt was found to adsorb significantly at concentrations of 0.5 CMC and above. This interesting and somewhat unexpected finding demonstrates that counterion identity may be used to tune the adsorption of anionic surfactants on anionic surfaces. At the CMC, three condensed bilayers of Ca(AOT)2 were adsorbed at pH 7 and 9 and four bilayers adsorbed at pH 4. Multilayering at the CMC of Ca(AOT)2 on the mica surface is an unusual feature of this surfactant/surface combination. Only single bilayer adsorption has been observed at other surfaces at the CMC. We suggest this arises from the high charge density of mica which must provide an excellent template for the surfactant.

The Search for Nanobubbles by Using Specular and Off-Specular Neutron Reflectometry.

We apply specular and off-specular neutron reflection at the hydrophobic silicon/water interface to check for evidence of nanoscopic air bubbles whose presence is claimed after an ad hoc procedure of solvent exchange. Nanobubbles and/or a depletion layer at the hydrophobic/water interface have long been discussed and generated a plethora of controversial scientific results. By combining neutron reflectometry (NR), off-specular reflectometry (OSS), and grazing incidence small angle neutron scattering (GISANS), we studied the interface between hydrophobized silicon and heavy water before and after saturation with nitrogen gas. Our specular reflectometry results can be interpreted by assuming a submolecular sized depletion layer and the off-specular measurements show no change with nitrogen super saturated water. This picture is consistent with the assumption that, following the solvent exchange, no additional nanobubbles are introduced at significant concentrations (if present at all). Furthermore, we discuss the results in terms of the maximum surface coverage of nanobubbles that could be present on the hydrophobic surface compatibly with the sensitivity limit of these techniques.

Unswollen layer of cross-linked polyisoprene at the solid interface

The density profile in a thin cross-linked polyisoprene (PI) film spin-coated on a quartz substrate in n-hexane was examined by specular neutron reflectivity. We found two layers with different PI densities at the substrate interface. The characteristics of the layers are discussed in terms of bound rubber typically associated with the field of rubber materials and adsorbed layers typically associated with the field of glassy materials.

Measurement and modeling of polarized specular neutron reflectivity in large magnetic fields.

The presence of a large applied magnetic field removes the degeneracy of the vacuum energy states for spin-up and spin-down neutrons. For polarized neutron reflectometry, this must be included in the reference potential energy of the Schrödinger equation that is used to calculate the expected scattering from a magnetic layered structure. For samples with magnetization that is purely parallel or antiparallel to the applied field which defines the quantization axis, there is no mixing of the spin states (no spin-flip scattering) and so this additional potential is constant throughout the scattering region. When there is non-collinear magnetization in the sample, however, there will be significant scattering from one spin state into the other, and the reference potentials will differ between the incoming and outgoing wavefunctions, changing the angle and intensities of the scattering. The theory of the scattering and recommended experimental practices for this type of measurement are presented, as well as an example measurement.

Self-Organization of Polystyrene-b-polyacrylic Acid (PS-b-PAA) Monolayer at the Air/Water Interface: A Process Driven by the Release of the Solvent Spreading.

We present an in situ structural study of the surface behavior of PS-b-PAA monolayers at the air/water interface at pH 2, for which the PAA blocks are neutral and using N,N-dimethyformamide (DMF) as spreading solvent. The surface pressure versus molecular area isotherm shows a perfectly reversible pseudoplateau over several cycles of compression/decompression. The width of such plateau enlarges when increasing temperature, conversely to what is classically observed in the case of an in-plane first order transition. We combined specular neutron reflectivity (SNR) experiments with contrast variation to solve the profile of each block perpendicular to the surface with grazing-incidence small-angle scattering (GISAXS) measurements to determine the in-plane structure of the layer. SNR experiments showed that both PS and PAA blocks remain adsorbed on the surface for all surface pressure probed. A correlation peak at Q(xy)* = 0.021 Å(-1) is evidenced by GISAXS at very low surface pressure which intensity first increases on the plateau. When compressing further, its intensity decays while Q(xy)* is shifted toward low Q(xy). The peak fully disappears at the end of the plateau. These results are interpreted by the formation of surface aggregates induced by DMF molecules at the surface. These DMF molecules remain adsorbed within the PS core of the aggregates. Upon compression, they are progressively expelled from the monolayer, which gives rise to the pseudoplateau on the isotherm. The intensity of the GISAXS correlation peak is set by the amount of DMF within the monolayer as it vanishes when all DMF molecules are expelled. This result emphizes the role of the solvent in Langmuir monolayer formed by amphiphilic copolymers which hydrophobic and hydrophilic parts are composed by long polymer chains.

Polarized neutron channeling as a tool for the investigations of weakly magnetic thin films

We present and apply a new method to measure directly weak magnetization in thin films. The polarization of a neutron beam channeling through a thin film structure is measured after exiting the structure edge as a microbeam. We have applied the method to a tri-layer thin film structure acting as a planar waveguide for polarized neutrons. The middle guiding layer is a rare earth based ferrimagnetic material TbCo5 with a low magnetization of about 20 mT. We demonstrate that the channeling method is more sensitive than the specular neutron reflection method.

Molecular dynamics simulations and neutron reflectivity as an effective approach to characterize biological membranes and related macromolecular assemblies.

In combination with other spectroscopy, microscopy, and scattering techniques, neutron reflectivity is a powerful tool to characterize biological systems. Specular reflection of neutrons provides structural information at the nanometer and subnanometer length scales, probing the composition and organization of layered materials. Currently, analysis of neutron reflectivity data involves several simplifying assumptions about the structure of the sample under study, affecting the extraction and interpretation of information from the experimental data. Computer simulations can be used as a source of structural and dynamic data with atomic resolution. We present a novel tool to compare the structural properties determined by neutron reflectivity experiments with those obtained from molecular simulations. This tool allows benchmarking the ability of molecular dynamics simulations to reproduce experimental data, but it also promotes unbiased interpretation of experimentally determined quantities. Two application examples are presented to illustrate the capabilities of the new tool. The first example is the generation of reflectivity profiles for a 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) lipid bilayer from molecular dynamics simulations using data from both atomistic and coarse-grained models, and comparison with experimentally measured data. The second example is the calculation of lipid volume changes with temperature and composition from all atoms simulations of single and mixed 1,2-di-palmitoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dihexadecanoyl-sn-glycero-3-phosphocholine (DPPC) bilayers.

Generic Role of Polymer Supports in the Fine Adjustment of Interfacial Interactions between Solid Substrates and Model Cell Membranes.

To understand the generic role of soft, hydrated biopolymers in adjusting interfacial interactions at biological interfaces, we designed a defined model of the cell-extracellular matrix contacts based on planar lipid membranes deposited on polymer supports (polymer-supported membranes). Highly uniform polymer supports made out of regenerated cellulose allow for the control of film thickness without changing the surface roughness and without osmotic dehydration. The complementary combination of specular neutron reflectivity and high-energy specular X-ray reflectivity yields the equilibrium membrane-substrate distances, which can quantitatively be modeled by computing the interplay of van der Waals interaction, hydration repulsion, and repulsion caused by the thermal undulation of membranes. The obtained results help to understand the role of a biopolymer in the interfacial interactions of cell membranes from a physical point of view and also open a large potential to generally bridge soft, biological matter and hard inorganic materials.

Consideration of diffuse scattering in the analysis of specular neutron reflection at the magnetic fluid-silicon interface

Neutron reflectometry data on the interface between a magnetic fluid (magnetite/sodium oleate/D2O) and silicon are considered with allowance for a background of diffuse scattering from magnetic-fluid nanoparticles adsorbed on the silicon surface. Two ways to subtract the background in selecting the specular reflection curve are analyzed. Based on a comparison of neutron reflectometry and small-angle neutron scattering data, it is concluded that individual nanoparticles rather than their aggregates (which are also present in the liquid phase) are preferably adsorbed on the silicon surface. In addition, free sodium-oleate molecules are adsorbed from the magnetic-fluid bulk.

Aggregation states of polystyrene at nonsolvent interfaces.

The aggregation states of polystyrene (PS) thin films at interfaces with nonsolvents such as water, methanol, and hexane were examined by specular neutron reflectivity and sum-frequency generation vibrational spectroscopy. The density profiles of the PS thin films along the direction normal to the interface with water and methanol were comparable to that in air. However, this was not the case for the film in hexane exhibiting a diffuse interfacial layer due to swelling. Also, the local conformation of PS in the outermost region of the films was quite sensitive to the surrounding environment and consequently responded to a change in its environment. This was the case for typical nonsolvents such as water and methanol. The extent of the conformational change might be explained in terms of the interfacial energy.

Calcium-mediated binding of DNA to 1,2-distearoyl-sn-glycero-3-phosphocholine-containing mixed lipid monolayers

The calcium-mediated interaction of DNA with monolayers of the non-toxic, zwitterionic phospholipid, 1,2-distearoyl-sn-glycero-3-phosphocholine when mixed with 50 mol% of a second lipid, either the zwitteronic 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine or neutral cholesterol was investigated using a combination of surface pressure-area isotherms, Brewster angle microscopy, external reflectance Fourier transform infrared spectroscopy and specular neutron reflectivity in combination with contrast variation. When calcium and DNA were both present in the aqueous subphase, changes were observed in the compression isotherms as well as the surface morphologies of the mixed lipid monolayers. In the presence of calcium and DNA, specular neutron reflectivity showed that directly underneath the head groups of the lipids comprising the monolayers, DNA occupied a layer comprising approximately 13 and 18% v/v DNA for the 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine and cholesterol-containing monolayers, respectively. The volume of the corresponding layer for 1,2-distearoyl-sn-glycero-3-phosphocholine only containing monolayers was ∼15% v/v DNA. Furthermore regardless of the presence and nature of the second lipid and the surface pressure of the monolayer, the specular neutron reflectivity experiments showed that the DNA-containing layer was 20-27 Å thick, suggesting the presence of a well-hydrated layer of double-stranded DNA. External reflectance Fourier transform infrared studies confirmed the presence of double stranded DNA, and indicated that the strands are in the B-form conformation. The results shed light on the interaction between lipids and nucleic acid cargo as well as the role of a second lipid in lipid-based carriers for drug delivery.

X-ray and neutron investigation of self-assembled lipid layers on a titanium surface

Titanium is the most widely preferred metal material for bone reconstruction in orthopedics and dentistry. To improve its biological performance, various coatings can be applied. In this investigation, a biomimetic coating on a model implant surface was studied in X-ray and neutron reflectivity experiments to probe the quality of this coating, which is only few nanometers thick. Titanium was deposited on polished silicon surfaces using a magnetron sputtering technique. To improve the lipid coating's stability, a stronger van der Waals interaction was first created between the implant surface and the biomimetic coating by adding a phosphonic acid (n-octadecylphosphonic acid - OPA) monolayer onto the surfaces. Then, three monolayers of POPE (phospholipid 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-ethanolamine) were transferred using the Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) techniques. The analysis of X-ray and neutron specular reflectivity data shows that OPA molecules cover the model implant surface completely and that approximately 50% coverage of POPE can be achieved by LB and LS transfer.

Dewetting Process of Deuterated Polystyrene and Poly(vinyl methyl ether) Blend Thin Films via Phase Separation

We studied the structure development in the dewetting process of deuterated polystyrene (dPS) and poly(vinyl methyl ether) (PVME) thin films, which were prepared by a spin-coating method on a quartz substrate, after the temperature jump into the two-phase region, using time-resolved specular and off-specular neutron reflectivity (NR), specular X-ray reflectivity (XR), light scattering (LS), and optical microscope (OM) measurements. The OM and specular XR measurements showed that there clearly existed an incubation period before dewetting. In the incubation period, composition fluctuations between dPS and PVME were developed due to phase separation. The specular NR results revealed that composition fluctuations began to occur just after the temperature jump along the depth direction over the film, giving rise to the composition gradient heterogeneously over the film. Composition fluctuations were also observed in the in-plane direction by the off-specular NR and LS measurements: the off-specular NR measure...

Cation Bridging Studied by Specular Neutron Reflection

The binding of an anionic surfactant onto an anionic surface by addition of divalent ions is reported based on experimental data from specular neutron reflection (NR) and attenuated total internal reflection IR spectroscopy (ATR-IR). Similar measurements using monovalent ions (sodium) do not show any evidence of such adsorption, even though the amount of surfactant can be much higher. This data is interpreted in terms of the so-called bridging mechanism of ion binding.

Effect of Helper Lipids on the Interaction of DNA with Cationic Lipid Monolayers Studied by Specular Neutron Reflection

The interaction of DNA with monolayers of the cationic lipid dimethyldioctadecylammonium bromide, with/without 50 mol % of a neutral "helper" lipid, either dioleoylphosphatidylethanolamine or cholesterol, has been studied using specular neutron reflection, surface pressure-area isotherms, and Brewster angle microscopy. The amount of DNA bound to the lipid head groups has been comprehensively quantified in the range of 8-39 vol% of DNA with respect to the monolayer composition (monolayers composed of dimethyldioctadecylammonium bromide binding the most DNA and monolayers containing dioleoylphosphatidylethanolamine binding the least) and surface pressure (DNA binding being greatest at highest surface pressures). Surprisingly, regardless of these variables, the thickness of the DNA-containing layer remained approximately constant between 18 and 25 Å. This systematic study is the first direct quantification of the binding of DNA with two different helper-lipid-containing multicomponent monolayers, an important step toward understanding interaction parameters in more realistic models of gene delivery systems.

Effect of pH, surface charge and counter-ions on the adsorption of sodium dodecyl sulfate to the sapphire/solution interface

The role of ionic interactions between sodium dodecyl sulfate, SDS, and sapphire surfaces have been studied using specular neutron reflection to determine the structure and composition of adsorbed surfactant layers. Increasing the pH of the solution from 3 to 9 reduces the adsorption by reversing the charge of the alumina. This occurs at lower pH for the R-plane (11¯02) than the C-plane (0001), corresponding to the different points of zero charge. The largest surface excess is about 6.5μmolm−2, the thickness of the adsorbed layer is about 24Å and it contains roughly 20% water. The hydrocarbon tails of the surfactant molecules clearly interpenetrate rather than form an ordered bilayer. The structure is similar in either pure water or in 0.1M NaCl when the surfactant is at the respective critical micelle concentration. Different structures were seen with lithium and cesium dodecyl sulfate. The CsDS forms dense layers with little or no hydration and a surface excess of about 10.5μmolm−2. The metal cation strongly influences the hydration of the adsorbed surfactant. An overall picture of ‘flattened micelles’ for the structure of the adsorbed layer is observed.

Analysis of randomly oriented structures by grazing-incidence small-angle neutron scattering

A formalism is presented which allows the quantitative evaluation of data from grazing-incidence small-angle neutron and X-ray scattering – GISANS and GISAXS – in the framework of the distorted wave Born approximation. While several aspects have been reported previously, this formalism combines solutions for scattering intensities in both reflection and transmission hemispheres, taking into account instrumental resolution effects. This formalism is applied to the case of GISANS from self-organized diblock copolymers, ordered in perpendicular lamellar structures on an Si wafer in randomly oriented short-range-ordered regions. The periodicity ofD= 85 (9) nm found for deuterated polystyrene–polybutadiene of molecular weight Mw= 165 kg mol−1and a molecular weight fraction of the deuterated polystyrene block of 52% is consistent with atomic force microscopy and specular neutron reflectivity results.

Adsorption of non-ionic surfactants to the sapphire/solution interface – Effects of temperature and pH

The adsorption of the non-ionic surfactants tetraoxyethylene glycol monododecyl ether (C12EO4), pentaoxyethylene glycol monododecyl ether (C12EO5), and hexaoxyethylene glycol monododecyl ether (C12EO6) to single crystal sapphire substrates has been studied using specular neutron reflection for solutions at the critical micelle concentration. The effects of temperature and pH of the solutions were studied as well as the differences between two different crystal faces, the C and the R planes. At neutral pH, significant adsorption was only observed when the temperature was raised above the cloud temperature. This adsorption was reversible and surfactant was displaced on cooling. Reducing the pH to 3 results in significantly increased adsorption of C12EO5 at 25°C with a central layer consisting mainly of surfactant (about 90%) on the C-plane substrate. A slightly smaller surface excess was observed for the R-plane. This contrasts with the significantly lower density observed even at high temperatures at neutral pH on both substrates. The results suggest that for neutral solutions surfactant association above the cloud point is the primary driving force for adsorption. At low pH, specific interactions with protonated surfaces are important. The structures of the highly hydrated layers are similar to those found for the surfactants at hydrophilic silica surfaces.

When beauty is only skin deep; optimizing the sensitivity of specular neutron reflectivity for probing structure beneath the surface of thin films

Specular neutron reflectometry has become an established probe of the nanometer scale structure of materials in thin film and multilayered form. It has contributed especially to our understanding of soft condensed matter of interest in polymer science, organic chemistry, and biology and of magnetic hard condensed matter systems. In this paper we examine a number of key factors which have emerged that can limit the sensitivity of neutron reflection as such a probe. Among these is loss of phase information, and we discuss how knowledge about material surrounding a film of interest can be applied to help resolve the problem. In this context we also consider what role the quantum phenomenon of interaction-free measurement might play in enhancing the statistical efficiency for obtaining reflectivity or transmission data.

The effect of neutral helper lipids on the structure of cationic lipid monolayers

Successful drug delivery via lipid-based systems has often been aided by the incorporation of 'helper lipids'. While these neutral lipids enhance the effectiveness of cationic lipid-based delivery formulations, many questions remain about the nature of their beneficial effects. The structure of monolayers of the cationic lipid dimethyldioctadecylammonium bromide (DODAB) alone, and mixed with a neutral helper lipid, either diolelyphosphatidylethanolamine or cholesterol at a 1 : 1 molar ratio was investigated at the air-water interface using a combination of surface pressure-area isotherms, Brewster angle microscopy (BAM) and specular neutron reflectivity in combination with contrast variation. BAM studies showed that while pure DODAB and DODAB with cholesterol monolayers showed fairly homogeneous surfaces, except in the regions of phase transition, monolayers of DODAB with diolelyphosphatidylethanolamine were, in contrast, inhomogeneous exhibiting irregular bean-shaped domains throughout. Neutron reflectivity data showed that while the thickness of the DODAB monolayer increased from 17 to 24 Å as it was compressed from a surface pressure of 5-40 mN m(-1), the thickness of the helper lipid-containing monolayers, over the same range of surface pressures, was relatively invariant at between 25 and 27 Å. In addition, the monolayers containing diolelyphosphatidylethanolamine were found to be more heavily hydrated than the monolayers of cationic lipid, alone or in combination with cholesterol, with hydration levels of 18 molecules of water per molecule of lipid being recorded for the diolelyphosphatidylethanolamine-containing monolayers at a surface pressure of 30 mN m(-1) compared with only six and eight molecules of water per molecule of lipid for the pure DODAB monolayer and the cholesterol-containing DODAB monolayer, respectively.