Low Water Solubility Research Articles

Enhancing the usability of pea protein in emulsion applications through modification by various approaches: A comparative study

The extensive utilization in food industry of pea protein is often impeded by its low water solubility, resulting in poor functional properties. Various methods, including pH-shifting (PS), ultrasonication (US), high-pressure micro-fluidization (MF), pH-shifting combined with ultrasonication (PS-US), and pH-shifting with micro-fluidization (PS-MF), were utilized to modify pea protein isolate (PPI) in order to enhance its functionality in emulsion formulation. The physicochemical properties and structural changes of the protein were investigated by assessing solubility, particle size, surface charge, protein profile, surface hydrophobicity, free sulfhydryl groups, and secondary structure content. The extent of modification induced by each treatment method on PPI-stabilized emulsions was compared based on parameters such as adsorbed interfacial protein concentration, particle size, zeta potential, and microstructure of the prepared emulsions. All modification increased the solubility of pea protein in the sequence of PS (4-fold) < MF (7-fold) < US (11-fold) < PS-US (13-fold) < PS-MF (14-fold). For single treatments, proteins dissolved more readily under US, resulting in the most uniform emulsions with small particle. The combined processes of PS-US and PS-MF further improved solubility, decreased emulsions particle size, promoted uniformity of emulsions. PS-US-stabilized emulsions displayed more smaller droplet size, narrower size distribution, and slightly higher stability than those prepared by PS-MF. The relatively higher emulsifying capacity of PPI treated by PS-US than those by PS-MF may be attributed to its higher surface hydrophobicity.

Fabrication of sulfobutylether-β-cyclodextrin/glabridin inclusion complex for promoting bioactivities.

As the main active compound of Glycyrrhiza glabra L., glabridin (GLD) has been shown to have multiple bioactivities, whereas the clinical application of GLD is restricted by its low water solubility. In this study, GLD was encapsulated into a sulfobutylether-β-cyclodextrin (SBE-β-CD)-based inclusion complex (SBE-β-CD/GLD) by the freeze-drying method. The materials characterization, antibacterial activity, stimulated cellular behavior and in vivo full-thickness diabetic wound healing ability of the hydrogels were assessed and analyzed. The successful encapsulation of the inclusion complex was confirmed by ultraviolet (UV) visible spectroscopy, Fourier transform infrared (FT-IR), X-ray diffractometer (XRD), scanning electron microscope (SEM), and nuclear magnetic resonance (NMR). SBE-β-CD as an excipient significantly enhances the water solubility of GLD, and SBE-β-CD/GLD showed excellent biocompatibility on human vascular endothelial cells (HUVECs) and erythrocytes. The SBE-β-CD/GLD inclusion complex exerted a pronounced antibacterial activity on Staphylococcus aureus and Escherichia coli in vitro. The SBE-β-CD/GLD inclusion complex markedly enhanced the antioxidant activity compared with free GLD. The SBE-β-CD/GLD inclusion complex potently accelerates the healing of full-thickness skin defects by inhibiting inflammation. The outcomes suggest that SBE-β-CD could be used as a promising drug delivery system for the clinical application of GLD.

A micro-fabricated potentiometric platform with application in a COVID-19 drug quantification and the determination of its binding affinity to a supramolecular host

Recent applications in host–guest chemistry include advanced sensing technologies, drug formulations, and drug delivery. Quantification of host–guest binding constants is significant to the continued optimization of their use. Binding constants offer valuable information about the stability and affinity of the formedcomplex that is essential to both drug formulations and delivery. In this study a novel green, portable, disposable, and cost-efficient microfabricated potentiometric sensor is introduced and successfully applied to determine the concentration of remdesivir (RMD), a COVID-19 drug, and its binding affinity to the supramolecular host sulfobutylether-β-cyclodextrin (SBEβCD) as a compatible solubilizing agent; to overcome the low water solubility of RMD which presents a significant challenge in its intravenous administration. The sensor incorporates multi-walled carbon nanotubes to improve stability and detection limits. To reduce interference effects and enhance the selectivity of the sensor for RMD, 4-tert-butyl-calix[8]arene was employed as an ionophore. A Nernstian potentiometric response for RMD over a concentration range of 1.0 × 10−3 to 1.0 × 10−6 M with a slope of 58.2 ± 0.9 mV decade−1 and a detection limit of 0.23 µM were achieved. The binding constant of the RMD-SBEβCD complex was determined to be 9.76 × 103 M−1. The proposed sensor was shown to be effective for drug quantification and measurements of binding affinities, providing valuable insights into the physicochemical properties of target drugs.

Improving physicochemical characteristics and cytotoxicity of baicalin esters by liposome encapsulation

The instability of ester bonds, low water solubility, and increased cytotoxicity of flavonoid glycoside esters significantly limit their application in the food industry. Therefore, the present study attempted to resolve these issues through liposome encapsulation. The results showed that baicalin butyl ester (BEC4) and octyl ester (BEC8) have higher encapsulation and loading efficiencies and lower leakage rate from liposomes than baicalin. FTIR results revealed the location of BEC4 and BEC8 in the hydrophobic layer of liposomes, which was different from baicalin. Additionally, liposome encapsulation improved the water solubility and stability of BEC4 and BEC8 in the digestive system and PBS but significantly reduced their cytotoxicity. Furthermore, the release rate of BEC4 and BEC8 from liposomes was lower than that of baicalin during gastrointestinal digestion. These results indicate that liposome encapsulation alleviated the negative effects of fatty chain introduction into flavonoid glycosides.

Comparative Assessments of Dental Resin Composites: A Focus on Dense Microhybrid Materials.

The performance of dental resin composites is crucially influenced by the sizes and distributions of inorganic fillers. Despite the investigation of a variety of functional particles, glass fillers and nanoscale silica are still the predominant types in dental materials. However, achieving an overall improvement in the performance of resin composites through the optimization of their formulations remains a challenge. This work introduced a "dense" microhybrid filler system with 85 wt % filler loading, leading to the preparation of self-developed resin composites (SRCs). Comparative evaluations of these five SRCs against four commercial products were performed, including mechanical property, polymerization conversion, and shrinkage, along with water sorption and solubility and wear resistance. The results showed that among all SRC groups, SRC3 demonstrated superior mechanical performance, high polymerization conversion, reduced shrinkage, low water absorption and solubility, and acceptable wear resistance. In contrast to commercial products, this optimal SRC3 material was comparable to Z350 XT in flexural and diametral tensile strength and better in flexural modulus and surface hardness. The use of a "dense" microhybrid filler system in the development of resin composites provides a balance between physicochemical property and wear resistance, which may be a promising strategy for the development of composite products.

Physicochemical properties, the digestible and resistant starch content of chestnut flour with different particle sizes

Abstract In this study, chestnuts were processed into flour, and the obtained chestnut flour (CF) was passed through a sieve with an aperture size of 212 µm. Then the physicochemical properties, digestible and resistant starch contents of CF1 (&lt;212 µm), CF2 (≥212 µm), and commercial chestnut flour (CCF) were determined. It was found that CCF had the highest values in terms of proximate composition, total soluble polyphenol content (891.25 mg GAE/100 g), and antioxidant activity (ABTS: 1552.11 mg TE/100 g, DPPH: 2003.01 mg TE/100 g). On the other hand, CF1 was superior in terms of resistant starch content (39.31 g/100 g, dw) (p &lt; 0.05). The resistant starch content of CF1 was approximately 1.5-fold and 3-fold higher than CCF and CF2, respectively. Furthermore, the rapidly digestible starch content of CF1 (2.1 g/100 g, dw) and CF2 (0.93 g/100 g, dw) was quite lower than CCF (12.64 g/100 g, dw) (p &lt; 0.05). Moreover, CF1 exhibited lower (p &lt; 0.05) water, alkaline water, and sodium carbonate retention capacities, which make it a potential good flour for cookie and cracker production. In contrast, CF2 could be evaluated as a good ingredient for noodle-type foods due to its lower water solubility index. Considering the least gelation concentrations of samples, it was seen that CF1 (% 10) could also be valorized as a thickening or gelation agent in the food industry, as well as CCF (% 6).

Whey protein nanoparticles: Enhancing solubility, environmental resistance, and bio-accessibility of pterostilbene

Pterostilbene (Pte) is a dietary phenolic compound derived from plants that offers numerous physiological advantages. Nonetheless, its low water solubility and limited oral bioavailability restrict its bioactivity. To address these limitations, nanoparticles were prepared using anti-solvent precipitation method. Optimal nanoparticles were achieved at a 10:1 mass ratio of whey protein isolate (WPI) to Pte, resulting in a particle size of 104.54 nm, a polydispersity index of 0.42, and an impressive encapsulation efficiency of Pte at 85.02%. The water solubility of Pte in the nanoparticles was found to be 53.14 times higher than that of free Pte and remained stable under various environmental conditions. Furthermore, the DPPH and ABTS+ free radical scavenging activities of the nanoparticles were maximized at 55.58% and 92.97%, respectively. Pte release from WPI-Pte nanoparticles was well-fitted to Korsmeyer-Peppas model and followed a non-Fickian mechanism controlled by both diffusion and erosion. This environmentally friendly, straightforward, and efficient approach shows promise for large-scale production of Pte products with amplified health benefits.

Enhancing Curcumin’s therapeutic potential in cancer treatment through ultrasound mediated liposomal delivery

Improving the efficacy of chemotherapy remains a key challenge in cancer treatment, considering the low bioavailability, high cytotoxicity, and undesirable side effects of some clinical drugs. Targeted delivery and sustained release of therapeutic drugs to cancer cells can reduce the whole-body cytotoxicity of the agent and deliver a safe localized treatment to the patient. There is growing interest in herbal drugs, such as curcumin, which is highly noted as a promising anti-tumor drug, considering its wide range of bioactivities and therapeutic properties against various tumors. Conversely, the clinical efficacy of curcumin is limited because of poor oral bioavailability, low water solubility, instability in gastrointestinal fluids, and unsuitable pH stability. Drug-delivery colloid vehicles like liposomes and nanoparticles combined with microbubbles and ultrasound-mediated sustained release are currently being explored as effective delivery modes in such cases. This study aimed to synthesize and study the properties of curcumin liposomes (CLs) and optimize the high-frequency ultrasound release and uptake by a human breast cancer cell line (HCC 1954) through in vitro studies of culture viability and cytotoxicity. CLs were effectively prepared with particles sized at 81 ± 2 nm, demonstrating stability and controlled release of curcumin under ultrasound exposure. In vitro studies using HCC1954 cells, the combination of CLs, ultrasound, and Definity microbubbles significantly improved curcumin’s anti-tumor effects, particularly under specific conditions: 15 s of continuous ultrasound at 0.12 W/cm2 power density with 0.6 × 107 microbubbles/mL. Furthermore, the study delved into curcumin liposomes’ cytotoxic effects using an Annexin V/PI-based apoptosis assay. The treatment with CLs, particularly in conjunction with ultrasound and microbubbles, amplified cell apoptosis, mainly in the late apoptosis stage, which was attributed to heightened cellular uptake within cancer cells.

UiO-66(Zr) as drug delivery system for non-steroidal anti-inflammatory drugs

The toxicity for the human body of non-steroidal anti-inflammatory drugs (NSAIDs) overdoses is a consequence of their low water solubility, high doses, and facile accessibility to the population. New drug delivery systems (DDS) are necessary to overcome the bioavailability and toxicity related to NSAIDs. In this context, UiO-66(Zr) metal-organic framework (MOF) shows high porosity, stability, and load capacity, thus being a promising DDS. However, the adsorption and release capability for different NSAIDs is scarcely described. In this work, the biocompatible UiO-66(Zr) MOF was used to study the adsorption and release conditions of ibuprofen, naproxen, and diclofenac using a theoretical and experimental approximation. DFT results showed that the MOF-drug interaction was due to an intermolecular hydrogen bond between protons of the groups in the defect sites, (μ3 − OH, and − OH2) and a lone pair of oxygen carboxyl functional group of the NSAIDs. Also, the experimental results suggest that the solvent where the drug is dissolved affects the adsorption process. The adsorption kinetics are similar between the drugs, but the maximum load capacity differs for each drug. The release kinetics assay showed a solvent dependence kinetics whose maximum liberation capacity is affected by the interaction between the drug and the material. Finally, the biological assays show that none of the systems studied are cytotoxic for HMVEC. Additionally, the wound healing assay suggests that the UiO-66(Zr) material has potential application on the wound healing process. However, further studies should be done.

Pleurotus sajor-caju (Fr.) Singer β-1,3-Glucanoligosaccharide (Ps-GOS) Suppresses RANKL-Induced Osteoclast Differentiation and Function in Pre-Osteoclastic RAW 264.7 Cells by Inhibiting the RANK/NFκB/cFOS/NFATc1 Signalling Pathway.

Edible grey oyster mushroom, Pleurotus sajor-caju, β (1,3), (1,6) glucan possesses a wide range of biological activities, including anti-inflammation, anti-microorganism and antioxidant. However, its biological activity is limited by low water solubility resulting from its high molecular weight. Our previous study demonstrated that enzymatic hydrolysis of grey oyster mushroom β-glucan using Hevea β-1,3-glucanase isozymes obtains a lower molecular weight and higher water solubility, Pleurotus sajor-caju glucanoligosaccharide (Ps-GOS). Additionally, Ps-GOS potentially reduces osteoporosis by enhancing osteoblast-bone formation, whereas its effect on osteoclast-bone resorption remains unknown. Therefore, our study investigated the modulatory activities and underlying mechanism of Ps-GOS on Receptor activator of nuclear factor kappa-Β ligand (RANKL) -induced osteoclastogenesis in pre-osteoclastic RAW 264.7 cells. Cell cytotoxicity of Ps-GOS on RAW 264.7 cells was determined by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay and its effect on osteoclast differentiation was determined by tartrate-resistant acid phosphatase (TRAP) staining. Additionally, its effect on osteoclast bone-resorptive ability was detected by pit formation assay. The osteoclastogenic-related factors were assessed by quantitative reverse transcriptase polymerase chain reaction (qRT-PCR), Western blot and immunofluorescence. The results revealed that Ps-GOS was non-toxic and significantly suppressed the formation of mature osteoclast multinucleated cells and their resorption activity by reducing the number of TRAP-positive cells and pit formation areas in a dose-dependent manner. Additionally, Ps-GOS attenuated the nuclear factor kappa light chain-enhancer of activated B cells' P65 (NFκB-P65) expression and their subsequent master osteoclast modulators, including nuclear factor of activated T cell c1 (NFATc1) and Fos proto-oncogene (cFOS) via the NF-κB pathway. Furthermore, Ps-GOS markedly inhibited RANK expression, which serves as an initial transmitter of many osteoclastogenesis-related cascades and inhibited proteolytic enzymes, including TRAP, matrix metallopeptidase 9 (MMP-9) and cathepsin K (CTK). These findings indicate that Ps-GOS could potentially be beneficial as an effective natural agent for bone metabolic disease.

Entangling imidazolium-based ionic liquids and melanins: A crossover study on chemical vs electronic properties and carrier transport mechanisms

Melanins (mel) are a class of pigments that are nearly ubiquitous and among the oldest compounds found in nature. However, their practical application has been limited due to their low solubility in water and in most organic solvents. Recent research on polydopamine has revealed that ionic liquids (ILs) not only enhance melanin’s dissolution but also fine-tune its redox properties through specific dipolar interactions. In this study, we expand upon previous investigations by customizing new suspensions on a broader range of melanins. Concerning ILs, we focus on imidazolium based ILs, tailoring their chemical properties (pKa) and structural characteristics (cation radius, anion radius).The melanins under consideration include synthetic polymers derived from the oxidative polymerization of 5,6-dihydroxyindole (DHI) and its 2-carboxylic acid counterpart (DHICA), as well as the natural pigment Sepiomelanin (Sepiomel), which is isolated from the ink sack of cuttlefish. Our comparative analysis between neat ILs and ILs-mel responses reveals several key findings: the increase in solubility, the tuning of the redox ability, the decrease of the ionic charge resistance (from MΩ τo kΩ); the partial removal of the electrical polarization effects and the delocalized ionic charge hopping mechanisms in conductivity; the increase of the free ionic diffusion mobility and Debye lengths. Notably, electrical transport is influenced by both the chemical features and the steric hindrance in the ILs as well as the specific type of melanin employed. These factors contribute to the high order correlation between free ionic charge densities and their corresponding Debye lengths. Consequently, our findings suggest that for these complex systems, an improved model extending beyond a simplified electrostatic interaction mechanism is required.

Unlocking the potential of luteolin: A natural migraine management approach through network pharmacology

BackgroundLuteolin, a natural flavonoid, exhibits antioxidant and anti-inflammatory properties and has been investigated for potential health benefits. Its focus on migraine management arises from its ability to mitigate neuroinflammation, a key factor in migraine attacks. MethodspkCSM and Swiss ADME were employed to assess luteolin's pharmacokinetic properties, revealing challenges such as low water solubility and limited skin permeability. OSIRIS Property Explorer is used to check the toxicity. Ligand binding simulations indicated luteolin's potential to interact with calcitonin gene related peptide proteins, crucial in migraine pathophysiology. DisGeNet identified common targets related to migraine, with subsequent network analysis emphasizing promising targets. Results and DiscussionLuteolin demonstrated good intestinal absorption but faced BBB limitations, suggesting a potential for oral administration but questioning direct brain impact. Nanoformulation was proposed to address solubility challenges, emphasizing the need for in vivo validation. The highest binding affinity with CGRP proteins PDBID: 6PFO (−7.63 kcal/mol) suggested a potential for migraine treatment, requiring empirical confirmation. Enrichment network analysis illustrated luteolin's potential in migraine treatment, emphasizing key targets such as PTGS2, AKT1, ESR1, MMP2, and MMP9. Luteolin shows promise for migraine management, evident in its pharmacokinetic, toxicological profiles, and interactions with CGRP proteins. Challenges like low solubility suggest the need for nanoformulations and empirical validation. Target identification and network analysis offer insights, highlighting potential therapeutic avenues in migraine treatment. ConclusionLuteolin holds promise in migraine management, necessitating further research for translation into effective interventions, considering its neuroprotective potential in broader neurological conditions.

Hesperidin nanoparticles for prostate cancer therapy: preparation, characterization and cytotoxic activity

Hesperidin, a phytochemical renowned for its therapeutic effects including anticancer, antioxidant, and anti-inflammatory properties, encounters a significant limitation in its application due to its low bioavailability and restricted solubility in water. To surmount these challenges, we employed a spontaneous emulsification method to produce hesperidin nanoparticles. These nanoparticles, averaging 197.2 ± 2.8 nm, exhibited uniform dispersion (polydispersity index: 0.13), a zeta potential (ZP) of −28 mV, encapsulation efficiency of 84.04 ± 1.3%, and demonstrated stable and controlled release across various environments. Assessment of the nanoemulsions stability revealed remarkably high stability levels. Cytotoxicity evaluations (3-(4,5-dimethylthiazol-2-yl)-2,5diphenyl-2-H-tetrazolium bromide, neutral red, trypan blue, and lactate dehydrogenase) indicated that cancer cell viability following treatment with hesperidin nanoemulsion was concentration and time-dependent, significantly lower compared to cells treated with free hesperidin. The colony formation assay and cell morphology evaluation further corroborated the heightened efficacy of hesperidin in its nano form compared to the free form. In summary, hesperidin nanoparticles not only exhibited more potent anticancer activity than free hesperidin but also demonstrated high biocompatibility with minimal cytotoxic effects on healthy cells. These findings underscore the potential for further exploration of hesperidin nanoparticles as an adjunctive therapy in prostate cancer therapy.

Antiviral drug discovery: Pyrimidine entry inhibitors for Zika and dengue viruses

Vector-borne diseases, constituting over 17 % of infectious diseases, are caused by parasites, viruses, and bacteria, and their prevalence is shaped by environmental and social factors. Dengue virus (DENV) and Zika virus (ZIKV), some of the most prevalent infectious agents of this type of diseases, are transmitted by mosquitoes belonging to the genus Aedes. The highest prevalence is observed in tropical regions, inhabited by around 3 billion people. DENV infects millions of people annually and constitutes an additional sanitary challenge due to the circulation of four serotypes, which has complicated vaccine development. ZIKV causes large outbreaks globally and its infection is known to lead to severe neurological diseases, including microcephaly in newborns. Besides, not only mosquito control programs have proved to be not totally effective, but also, no antiviral drugs have been developed so far. The envelope protein (E) is a major component of DENV and ZIKV virion surface. This protein plays a key role during the virus cell entry, constituting an attractive target for the development of antiviral drugs. Our previous studies have identified two pyrimidine analogs (3e and 3h) as inhibitors; however, their activity was found to be hindered by their low water solubility. In this study, we performed a low-throughput antiviral screening, revealing compound 16a as a potent DENV-2 and ZIKV inhibitor (EC50 = 1.4 μM and 2.4 μM, respectively). This work was aimed at designing molecules with improved selectivity and pharmacokinetic properties, thus advancing the antiviral efficacy of compounds for potential therapeutic use.

Iodine/soluble starch cryogel: An iodine-based antiseptic with instant water-solubility, improved stability, and potent bactericidal activity

Iodine (I2) as a broad-spectrum antiseptic has been widely used for treating bacterial infections. However, I2 has low water-solubility and sublimes under ambient conditions, which limits its practical antibacterial applications. The highly specific and sensitive reaction between I2 and starch discovered 200 years ago has been extensively applied in analytical chemistry, but the antibacterial activity of the I2–starch complex is rarely investigated. Herein, we develop a novel type of iodine-based antiseptics, iodine−soluble starch (I2-SS) cryogel, which can dissolve in water instantly and almost completely kill bacteria in 10 min at 2 μg/mL of I2. Although KI3 and the commercially available povidone‑iodine (I2-PVP) solutions show similar antibacterial efficacy, the high affinity of I2 to SS largely enhances the shelf stability of the I2-SS solution with ∼73 % I2 left after one-week storage at room temperature. In sharp contrast, ∼8.5 % and ∼2.5 % I2 are detected in KI3 and I2-PVP solutions, respectively. Mechanistic study reveals that the potent antibacterial effect of I2-SS originates from its attack on multiple bacterial targets. The outstanding antibacterial activity, capability of accelerating wound healing, and good biocompatibility of I2-SS are verified through further in vivo experiments. This work may promote the development of next-generation iodine-based antiseptics for clinical use.

Application of 18β-glycyrrhetinic acid in the structural modification of natural products: a review.

18β-Glycyrrhetinic acid (GA) is an oleane-type pentacyclic triterpene saponin obtained from glycyrrhizic acid by removing 2 glucuronic acid groups. GA and its analogues are active substances of glycyrrhiza aicd, with similar structure and important pharmacological effects such as anti-inflammatory, anti-diabetes, anti-tumor and anti-fibrosis. Although GA combined compounds are in the clinical trial stages, its application potential is severely restricted by its low bioavailability, water solubility and membrane permeability. In this article, synthetic methods and structure-activity relationships (SARs) of GA derivatives from 2018 to present are reviewed based on pharmacological activity. It is hoped that this review can provide reference for the future development of potential GA preclinical candidate compounds, and furnish ideas for the development of pentacyclic triterpenoid lead compounds.

PVA/whey protein nanofiber-coated PP melt blown integrated with Pickering emulsion of citral stabilized for potential medical applications

As an antibacterial agent with pleasant fragrance, citral (CIT) indicates hydrophobic character, and therefore has low water solubility. In this study, Pickering emulsions were formed and polyvinyl alcohol (PVA)/whey protein hydrophilic nanofibers were coated on PP melt blown non-woven surfaces by electrospinning method. In this context, hydrophobic citral essential oil is stabilized with β-cyclodextrin (β-CD) in the electrospinning process. PVA and whey protein polymer blend were used as nanofiber matrixes. The morphological, physical, and thermal properties of the β-CD/citral complexes were investigated in PVA/whey protein nanofiber-coated PP non-wovens at various β-CD levels (1:2, 1:4 and 1:6). Furthermore, zone inhibition procedure was performed to evaluate antibacterial activity of the samples against Gram (+) (Staphylococcus aureus ATCC® 25923) and Gram (-) (Escherichia coli ATCC® 25922, and Pseudomonas aeruginosa ATCC® 27853) bacteria. The morphology of fibers showed that all obtained nanofiber-coated PP surfaces were in the range with 216 - 330 nm average fiber diameter. Fourier Transform Infrared (FT-IR) and thermal gravimetric analysis (TGA) thermograms revealed that citral were successfully integrated into the bio-based nanofibers. As the amount of citral increased (i.e., the β-CD/citral increased), the thermal resistance of bio-based nanofiber coated PP surfaces increased. Antibacterial activity indicated the citral-loaded nanofiber-coated PP surfaces were most effective against Escherichia coli, while none of the samples have antibacterial activity against Pseudomonas aeruginosa. Overall, the results displayed that the fabricated PVA/whey protein nanofiber-coated PP samples integrated with Pickering emulsion of citral stabilized have promising wound dressing applications.

QbD-based optimization and evaluation of chitosan-adorned nanostructured lipid carriers for nose-to-brain delivery of 17β-Estradiol in rat model of Alzheimer's disease

Alzheimer's disease, a prevalent form of dementia affecting millions worldwide, poses a significant challenge, especially in elderly females after postmenopausal. The delivery of 17β-estradiol (EST), a potential therapeutic agent, is hindered by low water solubility and bioavailability. This study aimed to develop, optimize, and characterize nanostructured lipid carriers (NLCs) coated with chitosan (CS) for intranasal administration to enhance EST delivery to the brain for AD management. The NLCs were formulated through a solvent-free melt-emulsification and sonication method and optimized via a Box-Behnken design. The EST-NLCs that were optimized showed favorable colloidal properties. They had a particle size (PS) of 115.64 ± 2.44 nm, a polydispersity index (PDI) of 24 ± 1.66 %, a zeta potential (ZP) of −26.5 ± 0.72 mV, and an entrapment efficiency (EE) of 81.99 ± 1.43 %. When CS was introduced to form CS-EST-NLCs, it led to changes in the PS (126.76 ± 3.04 nm), % PDI (22.7 ± 1.78), a shift in ZP from negative to positive (34.07 ± 1.10 mV), and an increase in % EE of 84.39 ± 1.07. Differential scanning calorimetry and powder X-ray diffraction confirmed the amorphous dispersion of EST in the nanocarriers. Surface characterization confirmed the nanoscale size, spherical shape, and smooth exterior. In vitro drug release studies demonstrated a biphasic release pattern, with a burst followed by sustained release, fitting the Korsmeyer-Peppas model. The stability study results confirmed that formulations are stable for three months under ambient room temperature and refrigerated condition. Ex vivo studies supported the safety of EST using NLCs. Behavioral testing revealed the superior efficacy of intranasally administered CS-EST-NLCs compared to plain EST dispersion. The findings suggest that the biodegradable and mucoadhesive CS-EST-NLCs hold promise as a viable drug carrier for intranasal delivery to the brain, demonstrating both good safety and high tolerability.

Oral soluble shell prepared from OSA starch incorporated with tea polyphenols for the microencapsulation of Sichuan pepper oleoresin: Characterization, flavor stability, release mechanisms and its application in mooncake

The market share of Sichuan pepper oleoresin (SPO) in the flavor industry is increasing steadily; however, its high volatility, low water solubility, and poor stability continue to pose significant challenges to application. The microencapsulation prepared by emulsion embedding and spray drying is considered as an effective technique to solve the above problems. Sodium octenyl succinate starch (OSA starch) and tea polyphenols (TPs) were used to develop OSA-TPs complex as encapsulants for SPO to prepare orally soluble microcapsules. And the optimum doping of TPs was determined. SPO microcapsules have good properties with high encapsulation efficiency up to 88.13 ± 1.48% and high payload up to 41.58 ± 1.86% with low water content and high heat resistance. The binding mechanism of OSA starch with TPs and its regulation mechanism and effect on SPOs were further analyzed and clarified. The binding mechanism between OSA starch and TPs was clarified in further analyses. The OSA-TPs complexes enhanced the rehydration, release in food matrix and storage stability of SPO, and exhibited good sensory immediacy. Flavor-improved mooncakes were successfully developed, achieving the combination of mooncake flavor and SPO flavor. This study provided a valuable way to prepare flavoring microcapsules suitable for the catering industry, opened up the combined application of SPO and bakery ingredients, and was of great practical value and significance for improving the processing quality of flavor foods, driving the development of the SPO industry, and enhancing the national dietary experience.

Fabrication of poly(acrylic acid)/chitosan/linseed mucilage films: Thermal and mechanical properties

AbstractThe use of biodegradable polymers in the plastics industry has been increasing in recent years. The study of the chemical, physical, thermal, and mechanical properties of films based on biodegradable components is of interest to technologists because these properties determine their applicability for food packaging. In this work, films based on natural polymers such as linseed mucilage (LM) and chitosan (CH), as well as poly(acrylic acid) (PAA) were obtained through the casting method and using V‐50 as the initiator. The films were characterized through Fourier Transform Infrared spectroscopy, and thermogravimetric analysis, and their water absorption and swelling capacity, and thermal and mechanical properties were determined. Homogenous flexible, translucid, amber‐colored films, with low absorption and solubility in water were obtained. It was demonstrated through Fourier Transform Infrared analysis the chemical interaction between C–H, CO, and C–O chemical groups of LM, CH, and PAA. In addition, films showed high resistance to thermal decomposition between 125 and 425°C. The mechanical tests of tension allowed the composition of LM in the film, the behavior variates between a plastic and/or elastic material and with tensile strength (Rm) values between 10.8 and 16.4 MPa and elastic modulus (E) values between 56.2 and 169.2 GPa, we observed that at higher quantities of LM and thickness, both E and Rm tend to increase, while %EL decreases. This led us to conclude that the material transitioned from ductile and malleable to rigid and brittle. The films obtained with different ratios of LM/CH/PAA may exhibit a semi‐interpenetrating polymeric networking type morphology.Highlights Thermal and mechanical properties are of interest in food packaging materials. Water absorption can impact the packaged food. Films can be processed on existing machines for conventional plastics. Some conventional plastics could be replaced by these biodegradable films. Biodegradable films are of great interest to the industry of food packaging.