Dust Levels Research Articles

Salton Sea aerosol exposure in mice induces a pulmonary response distinct from allergic inflammation

In communities surrounding the Salton Sea, high rates of asthma are associated with high aerosol dust levels. However, the Salton Sea itself may play an additional role in pulmonary health. Therefore, to investigate a potential role of the Salton Sea on pulmonary health, we exposed mice to aerosolized Salton Sea water for 7 days and assessed tissue responses, including cellular infiltration and gene expression changes. For reference, mice were also exposed to aerosolized fungal allergen (Alternaria sp.) and Pacific Ocean aerosols. Exposure to aerosolized Alternaria sp. induced dramatic allergic inflammation, including neutrophil and eosinophil recruitment to the bronchoalveolar lavage fluid (BALF) and lung tissue. By contrast, Salton Sea “spray” induced only B cell recruitment to the lung tissue without increased inflammatory cell numbers in BALF. However, there were consistent gene expression changes suggestive of an inflammatory response. The response to the Salton Sea spray was notably distinct from the response to Pacific Ocean water, which induced some B cell recruitment but without an inflammatory gene expression profile. Our studies suggest that soluble components in Salton Sea water promote induction of a unique inflammation-associated response, though any relationship to asthma remains to be explored.

Analysis of PM2.5, PM10, and Total Suspended Particle Exposure in the Tema Metropolitan Area of Ghana

Dust levels around the Tema industrial area of the Greater Accra Region have seen no reduction in recent years. Even though at some periods in time a natural drop in dust pollution levels is assured, the overall variation characteristics of the concentration of PM2.5, PM10, and Total Suspended Particles (TSP) have not been studied in recent years. This paper examines the levels of dust pollution across four (4) locations within the Tema metropolitan area with a specific interest in selecting locations and periods (weeks) significantly affected by dust pollution within the study area. Data collection was done over a nine-month period using the Casella 712 Microdust Pro Kit equipment. Measurements were done day and night at sampling points about 100 m apart in a given location. Monitoring was conducted once a week during the day and at night with a sampling period of 24 h per location, for thirty-six weeks. The generalized linear models were explored in selecting locations and weeks significantly affected by dust pollution. The study results showed no significant difference between pollution levels across the four selected locations. Eight, eleven, and five weeks out of the 36 weeks recorded significantly high concentrations of PM2.5, PM10, and TSP respectively. In addition, two out of the selected four areas (the oil jetty area and the VALCO hospital area) were found to have significantly high concentrations of dust pollution. The study recommends that an urgent air quality control policy intervention be put in place to control the highly alarming levels of dust pollution concentrations to guarantee and protect human health within the study area and beyond.

Prediction of the Atmospheric Dustiness over the Black Sea Region Using the WRF-Chem Model

To make a reliable forecast for the level of dust, many external factors such as the wind energy and the soil content in the moisture must be considered. The numerical prediction of the Black sea region’s content of dust is the focus of this study, and for this purpose, the WRF-Chem model is used. The investigation is based on the statistics of the prediction coincidence and the actual result extracted from the data of the backward trajectories of AERONET and aerosol stratification maps in the atmosphere constructed with the help of the CALIPSO satellite. A comprehensive set of data was collected, and a comparative analysis of the results was carried out using machine learning techniques. The investigation identified 89% hits in the prediction of dust events, which is a very satisfactory result.

Innovation comprehensive solutions for off-gases cleaning in steel industry. Technical solutions for dusty gas flows cleaning

Metallurgical production associates with such processes as crushing, drying and pneumatic transportation of raw materials, roasting, melting etc., in the process of which hard particles and harmful gaseous components are emitted into atmosphere. At pneumatic transportation of raw materials and sand, their concentration in the atmosphere as a rule exceeds maximum permissible concentrations. Existing facilities of dusty flows cleaning in some cases don’t ensure sanitary norms ГН 2.1.6.3492‒17. Technical solutions proposed to clean gases in a centrifugal filter, a facility of complex gas cleaning – cyclo-filter and two-stage system of high-concentrated gas-dust flows cleaning. Description of the centrifugal filter, cyclo-filter, two-stage facility of gas cleaning design presented. The facility comprises centrifugal filter and ceramic pulse filter. Industrial tests of the centrifugal filter ЦФ2-6-1 under conditions of a system of pneumatic transportation of sand established, that efficiency of gas-dust flows cleaning of sand particles in a six-channel filter can reach 98.65%. Application of two-stage system of gas cleaning comprising centrifugal filter and ceramic pulse filter ФКИ enables to reach residual hard particles concentration at the exit of such a facility of 5 mg/m3, having initial dust level of 127878 mg/m3. Application of such a complex two-stage cleaning facility allows to reach values of 0.1 of maximum permissible concentrations near the source of emissions.

Elevated blood lead and metal/metalloid levels and environmental exposure sources in urban Ecuadorian school-age children and mothers.

Lead and other toxic and potentially toxic metals and metalloids are significant contributors to the global burden of disease and disability. Studies characterizing blood metal/metalloid levels and potential sources of environmental exposures are limited for populations living in the major urban centers of Andean-area countries. We used ICP-MS to quantify blood levels of lead (PbB), cadmium (CdB), manganese (MnB), total arsenic (AsB), and total mercury (HgB) in school-age children (n=47) and their reproductive-age mothers (n=49) from low-resource households in Quito, Ecuador. These were compared to published 95th percentile reference values (RV95) and for PbB, also to CDC reference values. We used a detailed environmental questionnaire to examine the contribution of residential and neighborhood environmental exposure sources with participant blood metal/metalloid levels. We used ICP-MS to measure Pb levels in residential windowsill dust, floor dust, and drinking water samples and used XRF for paint samples. Forty-five percent of the mothers had PbBs ≥ 5μg/dL; 14.3% had PbBs ≥10μg/dL. Maternal blood levels exceeded RV95s for PbB (76%), CdB (41%), MnB (88%), HgB (57%), and AsB (90%). Of children, 68% had PbBs ≥ 5μg/dL, and 21.3% had PbB ≥10μg/dL. Most child blood levels exceeded the RV95s for PbB (100%), CdB (100%), MnB (94%), and total HgB (94%) and AsB (98%). Most mothers (97%) and all children had blood levels indicating exposure to multiple metal/metalloid mixtures. Maternal and child PbBs were moderately correlated with each other but the other four metals/metalloids were not. Factors associated with maternal blood metal/metalloid levels were residence in a home with an earthen floor (PbB) or bare cement block walls (MnB), living near a dirt-paved or cobblestone street (PbB), <50m from a heavily trafficked major roadway (PbB, HgB), living in the Los Chillos (PbB) or Cotocollao neighborhoods (PbB, HgB), or in areas where street vendors grilled food using charcoal (MnB). Factors associated with child blood metal/metalloid levels were residence in a dirt floor home (PbB, CdB, AsB), living near a dirt-paved or cobblestone street (PbB), living in the El Camal or Cotocollao neighborhoods (AsB), or in local neighborhoods where scrap metal smelters (MnB) and LPG gas depositories (PbB) were present. The elevated blood levels of PbB, other metal/metalloids, and metal/metalloid mixtures identified mothers and children in this exploratory study is an urgent public health and clinical concern. The exposure patterns suggest that traffic-related exposures, especially the resuspension of legacy Pb in dust, as well as other anthropogenic and geogenic sources may be important environmental contributors to metal/metalloid exposures in urban Ecuadorian mothers and children. Future studies are needed to confirm these findings and explore other potential exposure sources. Biomonitoring is also needed in order to formulate effective intervention strategies to reduce population exposure to toxic levels of environmental metals/metalloids.

Assessing Children's Lead Exposure in an Active Mining Community Using the Integrated Exposure Uptake Biokinetic Model.

Lead exposure has been shown to be harmful to humans in various settings and there are no safe levels of blood lead in children. At an Alternative Superfund site in Hayden-Winkelman, Arizona, with an active copper smelter and concentrator, lead exceedances in air and soil have been measured in the past 20 years. In this work, the U.S. Environmental Protection Agency's Integrated Exposure Uptake Biokinetic (IEUBK) model was used to estimate Hayden-Winkelman children's (age 6 months-7 years) blood lead levels (BLLs) using site-specific lead concentrations measured in indoor and outdoor air, soil, indoor dust, and drinking water. Values used by a state agency's airborne lead risk forecast program were also evaluated to determine whether their forecasting program is useful in protecting children's public health. Using site-specific values in the model, the results demonstrated that lead ingested via indoor dust was the major contributor to children's BLLs. In addition, the output of the IEUBK model overestimated actual BLLs of children sampled in the community. The IEUBK model was particularly sensitive to high indoor dust levels, and these site-specific measures increased modeled BLL values. This finding is of significance as the IEUBK model is used worldwide in communities with industrial contamination. This study confirmed that the chief contributor to lead exposure in children is household dust. Thus, for lead exposure risk reduction, agencies working at Superfund sites should focus efforts on decontaminating outdoor soil and dust and indoor lead decontamination.

Characteristics of Heavy Metal Pollution and Ecological Risk Evaluation of Indoor Dust from Urban and Rural Areas in Taiyuan City During the Heating Season

The presence of heavy metals in indoor dust is a world-wide concern owing to its negative impact on humans. In this study, we collected indoor dust samples from urban and rural residential areas during the heating season in Taiyuan City. We then identified the concentrations of 11 heavy metals (Cd, Co, Cr, Pb, Mn, Ni, Cu, Zn, V, As, and Hg) using inductively coupled plasma-mass spectrometry. Based on the concentrations, we categorized the pollution levels of indoor dust using the geo-accumulation index and the pollution load index. We further identified the sources of heavy metals using the enrichment factor and principal component analysis. Finally, we evaluated the potential ecological risks of heavy metals via the potential ecological index. The results illustrated that ① with the exception of Co, Mn, and V, the mean concentrations of Cd, Cr, Cu, Ni, Pb, As, Zn, and Hg in indoor dust were higher than the soil background values of Shanxi Province. There was a significant difference (P<0.05) in the concentrations of Co, Cr, Cu, Mn, Ni, and Hg between the urban and rural areas. ② Overall, the pollution degree of heavy metals in indoor dust was identified as moderate in the urban area of Taiyuan City, but slight in the rural area. The indoor dust sample in the urban area was not contaminated by Co, Mn, and V. However, it was slightly polluted by As, Ni, and Hg. In addition, it was close to moderately polluted by Cd, Cr, Cu, Pb, and Zn. In the rural area, the pollution degrees of all the metals, except for Hg and V, in indoor dust were lower than those in the urban area. ③ The As, Cd, Cu, Pb, Zn, and Hg in indoor dust for both urban and rural areas might have mainly originated from anthropogenic sources. The pollution sources were mainly transportation and industry in the urban area and coal combustion and indoor smoking in the rural area. The Co, Cr, Mn, Ni, and V in indoor dust in Taiyuan City might have mainly originated from natural sources. ④ The ecological risk of heavy metal pollution in indoor dust for both the urban and rural areas of Taiyuan City was relatively high, with integrated ecological risk indexes of 359.43 and 471.02 in the urban and rural areas, respectively. In addition, Cd and Hg were the largest contributors.

The Effect of Alumunium Dust Exposure on Lung Function Disorders

Background: Industrial development continues to increase every year. CV X is a company in the manufacture of cauldrons and prickles which produce aluminum dust contaminants. Workers who work more than eight hours and lack of air exchange can affect lung function. This study aims to analyze the effect of aluminum dust exposure on lung function disorders in workers at CV X. Methods: This type of research was quantitative study with cross-sectional design. Sampling using simple random sampling technique according to inclusion and exclusion criteria with 40 respondents. Data analysis by using univariate and bivariate analysis with Chi-Square and Kolmogorov-Smirnov tests. Results: The results showed that there was no effect of aluminum dust exposure on lung function disorders (p = 0.166). However, there are 65% of workers who have lung function disorders, consists of 42.5% obstructive workers, 22.5% restrictive workers, and none of which have impaired combined lung function, while 35% of workers is normal. The majority of aluminum dust levels in the work environment are above the Threshold Value (5 mg/m3) of 72.5%. Conclusion: It is known that workers who experience obstruction problems of 51.7% are workers that exposed to aluminum dust above TLV (5 mg/m3) and there are 24.1% of workers experiencing restriction disorders exposed to aluminum dust above TLV. To prevent workers from experiencing lung function disorders due to exposure to aluminum dust, it is necessary to control efforts in the form of additional ventilation to reduce dust levels in the work environment.

Effects of (-)-Loliolide against Fine Dust Preconditioned Keratinocyte Media-Induced Dermal Fibroblast Inflammation.

At present air pollution in parts of East Asia is at an alarming level due to elevated levels of fine dust (FD). Other than pulmonary complications, FD was found to affect the pathogenesis of ROS-dependent inflammatory responses via penetrating barrier-disrupted skin, leading to degradation of extracellular matrix components through the keratinocyte-fibroblast axis. The present study discloses the evaluation of human dermal fibroblast (HDF) responses to FD preconditioned human keratinocyte media (HPM) primed without and with (-)-loliolide (HTT). HPM-FD treatment increased the ROS level in HDFs and activated mitogen-activated protein kinase-derived nuclear factor (NF)-κB inflammatory signaling pathways with a minor reduction of viability. The above events led to cell differentiation and production of matrix metalloproteinases (MMP), increasing collagenase and elastase activity despite the increase of tissue inhibitors of metalloproteinases (TIMP). Media from HTT primed keratinocytes stimulated with FD indicated ameliorated levels of MMPs, inflammatory cytokines, and chemokines in HDFs with suppressed collagenase and elastase activity. Present observations help to understand the factors that affect HDFs in the microenvironment of FD exposed keratinocytes and the therapeutic role of HTT as a suppressor of skin aging. Further studies using organotypic skin culture models could broaden the understanding of the effects of FD and the therapeutic role of HTT.

Occupational exposure of librarians to mold spores and metal particles: a real-time case study

In a university library, activities typical of librarians, such as unpacking boxes, removing books from the shelves, dusting, packing boxes, cataloguing, conservation and repair, photocopying, setting materials for class, and walking in a main hallway, were found to reduce indoor air quality through the production of airborne mold spores, metal dusts, and particulate matter of different size bins. Analyzing three libraries, the activity of conservation generated 9000 spores/m3 of mold spores, nearing the exposure limit of 104 spores/m3 reported for Penicillium sp., and silver nanoparticles of about 15 µg/m3, that over 8 h would exceed the occupational exposure limit of 0.19 µg/m3. For none of the activities, the levels of particulate matter with a diameter lower than 2.5 µm (PM2.5) and 10 µm (PM10) did not exceed the 8-h time weight average limits of exposure. However, by analyzing the 5th percentile of the real-time PM10 data, values of about 1.5 mg/m3, which is concerning for occupational exposure. Measuring real-time exposures of PM could generate an estimation of levels of mold spores and metal dusts in libraries. We demonstrate a high Spearman’s rank correlation (0.70) between the 5th percentile of PM with a diameter lower than 1 µm and different metals. A high linearity (R2 = 0.85) is obtained between the total average of PM with a diameter lower than 10 µm and mold spores/m3.

Changes in genotoxicity, inflammatory and oxidative stress parameters of workers in marble processing plants

Workers in marble processing plants are at high risk of exposure to high levels of marble dust containing silica, but there are limited studies evaluating the genotoxicity and oxidative stress parameters of workers occupationally exposed to marble dust. In this study, we aimed to clarify how marble dust affects genotoxicity and immunotoxicity mechanisms alongside oxidative stress in the workers in the marble processing plants of Iscehisar, Turkey. The oxidative stress and immune system parameters were determined spectrophotometrically using commercial kits. Genotoxicity was evaluated by Comet and micronucleus (MN) assays in the lymphocytes and buccal cells, respectively. The enzyme activities of superoxide dismutase, catalase, glutathione reductase, glutathione peroxidase, and the levels of glutathione, and Clara cell secretory protein CC16 in workers (n = 48) were significantly lower than in controls (n = 41), whereas the levels of malondialdehyde, 8-oxo-7,8-dihydro-2′-deoxyguanosine, tumor necrosis factor-alpha, interleukin-1beta were significantly higher in workers. DNA damage in workers were significantly higher than in controls and there was a clear correlation between the increase in DNA damage and the duration of exposure. Marble workers had significantly higher MN frequencies when compared to controls. The results indicate the possibility of immunotoxic and genotoxic risks to workers in marble industry.

Evaluation of Oxidative Stress in Blood of Domestic Chickens and Eurasian Magpies (Pica pica).

A physiological equilibrium exists between pro- and antioxidant factors. When the oxidant factors exceed the capacity of their removal or inactivation, oxidative stress (OS) occurs. The OS levels were assayed in plasma obtained from 2 bird species. Blood samples were collected from 20 healthy domestic chicken hens, 10 living in an intensive farming environment and 10 free-range, and from 18 healthy Eurasian magpies (Pica pica; 7 females and 11 males, with an estimated age of >1 year of age). For OS biomarker assessment, the determinable reactive oxygen metabolites (d-ROMs) were measured, and the plasmatic antioxidant test (PAT) was performed; the OS index (OSI) was then calculated (d-ROMs/PAT × 1000) as a parameter of overall oxidative stress. Moreover, lipid peroxidation was assessed by measuring plasmatic malondialdehyde (MDA) levels. A hematological evaluation was also performed on each bird with a hemocytometer, on which a blood sample was placed to obtain both a total and differential white blood cell (WBC) count. In hens, OSI and MDA levels were significantly higher (P = .04, and P = .004) in subjects from intensive farming (14.7 ± 7.1 and 27.2 ± 10.4 nmol/mL) than in those bred in rural conditions (5.6 ± 10.3 and 8.2 ± 13.3 nmol/mL). In magpies, a positive correlation between the total WBC count and OS was found, and both d-ROMs and OSI were significantly higher (P = .03) in subjects with a total WBC count greater than the median value (20.4 × 103 cells/µL) with respect to those with a total WBC count less than the median value. The results generated from this study indicate that higher OS levels occurred in hens bred in an intensive indoor farm environment compared with outdoor free-range conditions. Possibly the higher OS levels could be related to the higher stocking density and dust levels found in the indoor facility. Additionally, the correlation between OS biomarker levels in magpies and total WBC count suggests that OS level is influenced by immune response, in agreement with previous studies. Collectively, present data seem to be promising for the application of OS measurement in avian medicine for health and animal welfare monitoring.

Implication of aluminum in exerting some health disorders among exposed workers

The present study aimed to evaluate implication of aluminum in exerting male reproductive and thyroid hormonal disorders and lipid profile changes among aluminum workers. Cross-sectional study was carried on 56 male aluminum workers in aluminum welding factory. Aluminum dust level was measured and questionnaire was conducted for all participants. Urinary aluminum level, serum total cholesterol, triglycerides, high density lipoprotein, high sensitive c-reactive protein, apolipoprotein- E, total antioxidant capacity, malondialdehyde, luteinizing hormone, follicle stimulating hormone, testosterone,17-beta-estradiol, free triiodothyronine, free thyroxin and thyroid stimulating hormone were measured in both groups. Aluminum dust mean concentration was 1.6 ± 0.3 mg/m3 in the present study. Urinary aluminum, serum triglycerides, very low density lipoprotein cholesterol, high sensitive C-reactive protein and malondialdehyde levels were significantly higher while total antioxidant capacity was significantly lower among the exposed workers compared to controls. Serum follicle stimulating hormone and free triiodothyronine were significantly higher while free thyroxin was significantly lower in the exposed group compared to controls. No effect of smoking on all measured parameters was reported except for luteinizing hormone. Negative correlation was found between duration of exposure and 17-beta-estradiol. Urinary aluminum level was negatively correlated with total antioxidant capacity on one side and positively correlated with malondialdehyde on other side. Induction of oxidative stress and inflammation might be the possible mode of action by which aluminum exert male reproductive hormonal disorders and lipid profile changes. Aluminum may disrupt thyroid hormones. Pro inflammatory effect of aluminum was verified by the inflammatory markers.

Умови праці та аналіз професійних небезпек у працівників птахофабрики

It is noted that there are many serious risks to the safety and health of workers at poultry farms in Ukraine. These hazards include exposure to high levels of noise, dust, hazardous equipment, slippery floors, musculoskeletal disorders, hazardous chemicals and biological hazards. Studies show that prolonged exposure to high noise levels leads to noise hearing loss in workers of all ages. When performing work on catching, transplanting, transporting poultry, taking blood for chemical and serological tests, the noise level in the poultry house reaches 8690 dB. It is noted that during the repair and maintenance of machinery and equipment there is a risk of injury due to heat, electric shock, burns, cuts, tears, amputation or fractures of body parts. Poultry workers are the most vulnerable occupational group in terms of the risk of developing respiratory diseases. It has been established that 8-hour inhalation of dust in a concentration exceeding 4 mg/m3 is especially dangerous. The highest level of respiratory diseases was in 45-55-year-old workers. It is noted that poultry workers are exposed to ergonomic risks, which can cause injuries to the musculoskeletal system. The researchers found that 81% of poultry processing jobs have an increased level of repetitive hand movements and exertion. Workers complained of pain, numbness, burning, tingling in the hands or wrists. It is noted that new technologies will be able to reduce some types of ergonomic injuries. A significant danger for poultry workers is the risk of catching avian influenza. It is noted that workers have the right to healthy and safe working conditions, the development of special programs to protect them from industrial hazards. To protect workers, it is necessary to implement engineering and control measures and provide appropriate personal protective equipment.

Effects of elevated CO2 levels on lung immune response to organic dust and lipopolysaccharide

Workplaces with elevated organic dust levels such as animal feed barns also commonly have elevated levels of gasses, such as CO2. Workers exposed to such complex environments often experience respiratory effects that may be due to a combination of respirable factors. We examined the effects of CO2 on lung innate immune responses in mice co-exposed to the inflammatory agents lipopolysaccharide (LPS) and organic dust. We evaluated CO2 levels at the building recommended limit (1000 ppm) as well as the exposure limit (5000 ppm). Mice were nasally instilled with dust extracts or LPS and immediately put into chambers with a constant flow of room air (avg. 430 ppm CO2), 1000 ppm, or 5000 ppm CO2 enriched air. Results reveal that organic dust exposures tended to show decreased inflammatory responses with 1000 ppm CO2 and increased responses at 5000 ppm CO2. Conversely, LPS with addition of CO2 as low as 1000 ppm tended to inhibit several inflammatory markers. In most cases saline treated animals showed few changes with CO2 exposure, though some changes in mRNA levels were present. This shows that CO2 as low as 1000 ppm CO2 was capable of altering innate immune responses to both LPS and organic dust extracts, but each response was altered in a different fashion.

Spread of antibiotic resistance genes and microbiota in airborne particulate matter, dust, and human airways in the urban hospital

Antimicrobial resistance is an increasingly serious threat to public health worldwide. The presence of antibiotic resistance genes (ARGs) in human airways and relevant environments has not received significant attention. In this study, abundances of ARGs and microbes from airborne particulate matter, dust, and human airways in a hospital were profiled using high-throughput qPCR and 16S rRNA gene sequencing. More diverse ARGs and microbes in indoor dust and higher levels of ARGs in particulate matter PM10 and PM2.5 were observed. Macrolides and aminoglycoside resistance genes were the most abundant ARGs in the airway and environmental samples, respectively. Moreover, the co-occurrences of priority pathogens, ARGs, and mobile genetic elements (MGEs) were shown by the Network analysis. Campylobacter spp. and Staphylococcus spp. positively correlated with fluoroquinolone (vatC-02, mexD) and β-lactams (blaZ, mecA) resistance genes, respectively. In this regard, based on SourceTracker analysis, inhalable particles contributed to 4.0% to 5.5% of ARGs in human airway samples, suggesting an important exchange between airborne inhalable particles and human commensals. This study may advance knowledge about ARGs in airborne particulate matter and dust associated environments, reveal their potential link between environments and humans, and provide a new sight and fundamental data for ARG risk assessment.

Bottom-Up Emission Inventory and Its Spatio-Temporal Distribution from Paved Road Dust Based on Field Investigation: A Case Study of Harbin, Northeast China

Road dust is one of the primary sources of particulate matter which has implications for air quality, climate and health. With the aim of characterizing the emissions, in this study, a bottom-up approach of county level emission inventory from paved road dust based on field investigation was developed. An inventory of high-resolution paved road dust (PRD) emissions by monthly and spatial allocation at 1 km × 1 km resolution in Harbin in 2016 was compiled using accessible county level, seasonal data and local parameters based on field investigation to increase temporal-spatial resolution. The results demonstrated the total PRD emissions of TSP, PM10, and PM2.5 in Harbin were 270,207 t, 54,597 t, 14,059 t, respectively. The temporal variation trends of pollutant emissions from PRD was consistent with the characteristics of precipitation, with lower emissions in winter and summer, and higher emissions in spring and autumn. The spatial allocation of emissions has a strong association with Harbin’s road network, mainly concentrating in the central urban area compared to the surrounding counties. Through scenario analysis, positive control measures were essential and effective for PRD pollution. The inventory developed in this study reflected the level of fugitive dust on paved road in Harbin, and it could reduce particulate matter pollution with the development of mitigation strategies and could comply with air quality modelling requirements, especially in the frigid region of northeastern China.

Per- and Polyfluoroalkyl Substances in Outdoor and Indoor Dust from Mainland China: Contributions of Unknown Precursors and Implications for Human Exposure.

Per- and polyfluoroalkyl substances (PFASs) were analyzed in outdoor (n = 101) and indoor dust (n = 43, 38 paired with outdoors) samples across mainland China. From 2013 to 2017, the median concentration of ∑PFASs in outdoor dust tripled from 63 to 164 ng/g with an elevated contribution of trifluoroacetic acid and 6:2 fluorotelomer alcohol. In 2017, the indoor dust levels of ∑PFASs were in the range 185-913 ng/g, which were generally higher than the outdoor dust levels (105-321 ng/g). Emerging PFASs were found at high median levels of 5.7-97 ng/g in both indoor and outdoor dust samples. As first revealed by the total oxidized precursors assay, unknown perfluoroalkyl acid (PFAA)-precursors contributed 37-67 mol % to the PFAS profiles in indoor dust samples. A great proportion of C8 PFAA-precursors were precursors for perfluorooctanesulfonic acid, while C6 and C4 PFAA-precursors were mostly fluorotelomer based. Furthermore, daily perfluorooctanoic acid (PFOA) equivalent intakes of PFAAs (C4-C12) mixtures via indoor dust were first estimated at 1.3-1.5 ng/kg b.w./d for toddlers at high scenarios, which exceeds the derived daily threshold of 0.63 ng/kg b.w./d. from the European Food Safety Authority (EFSA). On this basis, an underestimation of 56%-69% likely remains without considering potential risks due to the biotransformation of unknown PFAA-precursors.

The Level of Securing Dust Deposits Against the Possibility of Coal Dust Explosion in the Drilled Dog Headings

The article presents the analysis how the actual coal dust explosion hazard is at the distance of the initial 200 metres of the safety zone maintained along the entire length of driven inclined drift II – face 567 in BRZESZCZE colliery, which was used during realization of the project titled Modelling of the mechanism of explosive coal dust deposition in the vicinity of mined faces in terms of identification, assessment and levelling the possibility of its explosion financed by the National Centre for Research and Development. The mine dust level was between 0.014 kg/m3 and 0.193 kg/m3, and the coal dust level between 0.003 kg/m3 and 0.051 kg/m3, at the content of non-combustible solids between 62.9% and 96.9%. In the analysed fragment of the mine working there was settled dry and volatile mine dust of transient water content between 0.1% and 3.8%. In a few measurement points (sidewalls, floor, and the dust explosion barrier) it was observed that the content of non-combustible solids was lower than required by the regulations (unsecured mine dust), which resulted from the insufficient application of stone dust and increased intensity of dust settlement, especially in the area near the longwall face. Analyses of the fraction distribution of the settled mine dust showed the presence of fine dust, while coarser fractions were found in the places of lowered content of non-combustible solids. The conclusions indicate that it is necessary to modify the currently applied dust-explosion prevention measures, which ought to adjust the amount of stone dust applied in given sections of the safety zone and the stone dust ought to be applied with more diligence.

Do flame retardant concentrations change in dust after older upholstered furniture is replaced?

Upholstered furniture has been a major source of chemical flame retardant (FR) exposures in US homes since the 1970s. FRs are a large group of chemicals, many of which are associated with adverse health effects, including cancer, reproductive toxicity, and neurotoxicity. California homes have some of the highest dust concentrations of FRs, due to Technical Bulletin 117 (TB117), California’s outdated flammability standard for furniture foam that was generally followed across the US and Canada. In 2014, this standard was updated to a smolder standard for furniture fabric called TB117-2013, and it is no longer reliant on FRs. This update provided an opportunity to measure differences in FR dust levels in California homes before and after residents replaced older upholstered furniture, or its foam, with products that met the new standard and were expected to be FR-free. We collected dust from homes of participants who had plans to replace older upholstered furniture, or furniture foam, with FR-free options. We returned for follow-up dust collection six, 12, and 18 months following replacement. Concentrations of three polybrominated diphenyl ethers (PBDEs) (BDE-47, BDE-99, BDE-100), three chlorinated organophosphate ester FRs (tris(2-chloroethyl) phosphate (TCEP), tris(2-chloroisopropyl) phosphate (TCIPP), and tris(1,3-dichloroisopropyl) phosphate (TDCIPP)), and one aryl organophosphate ester FR triphenyl phosphate (TPHP), were widely detected in participant homes. All measured FRs decreased in nearly all homes after the older upholstered furniture was replaced. The decreases in FRs were significant in both homes that replaced entire pieces of furniture and those that replaced only the furniture foam. This study demonstrates that replacing older upholstered furniture or foam significantly reduces concentrations of a range of FRs in the home. Foam replacement offers a potentially more economic alternative that produces a lower volume of waste.