Isothermal Nucleic Acid Amplification Test Research Articles

A simple Magnetic-aided microfluidic screening approach for rabies virus via rolling circle amplification

Rabies, being a fatal neurologic disease, is one of the neglected tropical diseases. Timely post-exposure prophylaxis is the key to healthcare, demanding an early diagnosis towards the much-envisaged ‘One Health’ measures. Despite being a disease with almost 100 % mortality cases, no significant progress has been made towards its early and accurate diagnosis. Herein, we report a simple microfluidic device based on magnetic trapping, without any complex design, in order to specifically screen rabies virus from biofluids. For this, we exploit Rolling Circle Amplification (RCA), a highly recommended isothermal nucleic acid amplification test (NAAT), with rapid and robust point-of-care diagnosis capabilities. This specific molecular assay was used for sensitive detection down to 2.69 fM and 14.5 fM for N- and L-gene targets, respectively. COMSOL simulations have accelerated experimental optimization time, resulting in effective capture and detection of magnetically-coupled amplicons. Fluorescently-tagged RCA products mixed with magnetic microparticles (M−RCPs) showed a clearly distinguishable signal between rabies vaccine strain and blood samples of healthy dogs. This simple technique presents a scalable proof-of-concept prototype for a highly specific ‘yes-or-no’ detection method for rabies virus, using a minimal sample volume and extendable for sensitive-cum-specific screening of other pathogens using tunable molecular probes.

Chemical Heating for Minimally Instrumented Point-of-Care (POC) Molecular Diagnostics.

The minimal instrumentation of portable medical diagnostic devices for point-of-care applications is facilitated by using chemical heating in place of temperature-regulated electrical heaters. The main applications are for isothermal nucleic acid amplification tests (NAATs) and other enzymatic assays that require elevated, controlled temperatures. In the most common implementation, heat is generated by the exothermic reaction of a metal (e.g., magnesium, calcium, or lithium) with water or air, buffered by a phase-change material that maintains a near-constant temperature to heat the assay reactions. The ability to incubate NAATs electricity-free and to further to detect amplification with minimal instrumentation opens the door for fully disposable, inexpensive molecular diagnostic devices that can be used for pathogen detection as needed in resource-limited areas and during natural disasters, wars, and civil disturbances when access to electricity may be interrupted. Several design approaches are reviewed, including more elaborate schemes for multiple stages of incubation at different temperatures.

Development of a Spot Test (ST) Based on the Nucleic Acid Amplification Test (NAAT) for Ginseng Species Authentication

It is very challenging to distinguish between Panax ginseng (P. ginseng) and Panax quinquefolius (P. quinquefolius) based on their physical appearances. Therefore, a molecular test that can be performed in commercial settings is needed to address this challenge. We have selected a locus containing a single nucleotide polymorphism (SNP) site in the Dammarendiol-II Synthase (DS) gene to differentiate between P. ginseng and P. quinquefolius. An isothermal nucleic acid amplification test (NAAT) developed previously was adapted and used on a spot test (ST) format consisting of a sample pad, a nitrocellulose membrane, and an adsorbent pad. An ST with a colorimetric detection method has been developed with visual detection based on 20-nm gold nanoparticles. The presence of the target DNA will generate a red color signal, which is visible to the naked eye. The assay comprises the capture probes, constructed based on the DS gene of ginseng, and the ends of the probe sequences sit on the SNP site for the P. ginseng and P. quinquefolius sequences; the detection probe employed in the assay is tagged with gold. The NAAT amplifies the extracted plant genomic samples and enhances the detection of specific SNPs. This NAAT technique was used to authenticate two ginseng root samples, showing greater specificity ratios than our previous work.

Real-Time Visualization of HIV-1 RNA Detection Using Loop-Mediated Isothermal Amplification-Enabled Particle Diffusometry.

Isothermal nucleic acid amplification tests, NAATs, such as reverse transcription-loop-mediated isothermal amplification (RT-LAMP), offer promising capabilities to perform real-time semiquantitative detection of viral pathogens. These tests provide rapid results, utilize simple instrumentation for single-temperature reactions, support efficient user workflows, and are suitable for field use. Herein, we present a novel and robust method for real-time monitoring of HIV-1 RNA RT-LAMP utilizing a novel implementation of particle diffusometry (PD), a diffusivity quantification technique using fluorescent particles, to quantify viral concentration in nuclease-free water. We monitor changes in particle diffusion dynamics of 400 nm fluorescently labeled particles throughout the RT-LAMP of HIV-1 RNA in nuclease-free water, enabling measurement within 20 min and detection of concentrations as low as 25 virus particles per μL. Moreover, in a single-blind study, we demonstrate semiquantitative detection by accurately determining the initial concentration of an unknown HIV-1 RNA within a 10% absolute error margin. These results highlight the potential of real-time PD readout for quantifying HIV-1 RNA via RT-LAMP, offering promise for viral load monitoring of HIV and other chronic infections.

Isothermal Technologies for HPV Detection: Current Trends and Future Perspectives.

The human papillomavirus (HPV) is a non-enveloped DNA virus transmitted through skin-to-skin contact that infects epithelial and mucosal tissue. It has over 200 known genotypes, classified by their pathogenicity as high-risk and low-risk categories. High-risk HPV genotypes are associated with the development of different types of cancers, including cervical cancer, which is a leading cause of mortality in women. In clinical practice and the market, the principal tests used to detect HPV are based on cytology, hybrid detection, and qPCR. However, these methodologies may not be ideal for the required timely diagnosis. Tests have been developed based on isothermal nucleic acid amplification tests (INAATs) as alternatives. These tests offer multiple advantages over the qPCR, such as not requiring specialized laboratories, highly trained personnel, or expensive equipment like thermocyclers. This review analyzes the different INAATs applied for the detection of HPV, considering the specific characteristics of each test, including the HPV genotypes, gene target, the limit of detection (LOD), detection methods, and detection time. Additionally, we discuss the tests available on the market that are approved by the Food and Drug Administration (FDA). Finally, we address the challenges and potential solutions for the large-scale implementation of INAATs, particularly in rural or underserved areas.

A multiplexed, allele-specific recombinase polymerase amplification assay with lateral flow readout for sickle cell disease detection.

Isothermal nucleic acid amplification tests have the potential to improve disease diagnosis at the point of care, but it remains challenging to develop multiplexed tests that can detect ≥3 targets or to detect point mutations that may cause disease. These capabilities are critical to enabling informed clinical decision-making for many applications, such as sickle cell disease (SCD). To address this, we describe the development of a multiplexed allele-specific recombinase polymerase amplification (RPA) assay with lateral flow readout. We first characterize the specificity of RPA using primer design strategies employed in PCR to achieve point mutation detection, and demonstrate the utility of these strategies in achieving selective isothermal amplification and detection of genomic DNA encoding for the healthy βA globin allele, or genomic DNA containing point mutations encoding for pathologic βS and βC globin alleles, which are responsible for most sickle cell disorders. We then optimize reaction conditions to achieve multiplexed amplification and identification of the three alleles in a single reaction. Finally, we perform a small pilot study with 20 extracted genomic DNA samples from SCD patients and healthy volunteers - of the 13 samples with valid results, the assay demonstrated 100% sensitivity and 100% specificity for detecting pathologic alleles, and an overall accuracy of 92.3% for genotype prediction. This multiplexed assay is rapid, minimally instrumented, and when combined with point-of-care sample preparation, could enable DNA-based diagnosis of SCD in low-resource settings. The strategies reported here could be applied to other challenges, such as detection of mutations that confer drug resistance.

Vibration mixing for enhanced paper-based recombinase polymerase amplification.

Isothermal nucleic acid amplification tests (NAATs) are a vital tool for point-of-care (POC) diagnostics. These assays are well-suited for rapid, low-cost POC diagnostics for infectious diseases compared to traditional PCR tests conducted in central laboratories. There has been significant development of POC NAATs using paper-based diagnostic devices because they provide an affordable, user-friendly, and easy to store format; however, the difficulties in integrating separate liquid components, resuspending dried reagents, and achieving a low limit of detection hinder their use in commercial applications. Several studies report low assay efficiencies, poor detection output, and poorer limits of detection in porous membranes compared to traditional tube-based protocols. Recombinase polymerase amplification is a rapid, isothermal NAAT that is highly suited for POC applications, but requires viscous reaction conditions that has poor performance when amplifying in a porous paper membrane. In this work, we show that we can dramatically improve the performance of membrane-based recombinase polymerase amplification (RPA) of HIV-1 DNA and viral RNA by employing a coin cell-based vibration mixing platform. We achieve a limit of detection of 12 copies of DNA per reaction, nearly 50% reduction in time to threshold (from ∼10 minutes to ∼5 minutes), and an overall fluorescence output increase up to 16-fold when compared to unmixed experiments. This active mixing strategy enables reactions where the target and reaction cofactors are isolated from each other prior to the reaction. We also demonstrate amplification using a low-cost vibration motor for both temperature control and mixing, without the requirement of any additional heating components.

The diagnostic accuracy of the ID NOW COVID-19 point of care test in acute hospital admissions

BackgroundPrompt identification of patients with severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) infection on admission to hospital is crucial to ensuring initiation of appropriate treatment, optimising infection control and maintaining patient flow. The Abbott ID NOW™ COVID-19 assay (ID NOW) is a point-of-care, isothermal nucleic acid amplification test, capable of producing a result within minutes, potentially placing it as an invaluable tool in helping to control the coronavirus-disease 2019 (COVID-19) pandemic. ObjectivesTo evaluate the diagnostic accuracy of ID NOW in acute hospital admissions. Study designA prospective approach to data collection was undertaken in consecutive patients with ID NOW and Hologic Aptima™ SARS-CoV-2 transcription-mediated amplification assay (Aptima TMA) results, across three hospitals in the south-west of England between 1st March and 30th September 2021. A nasal swab was taken for ID NOW and a combined nose and throat swab for Aptima TMA. Measures of diagnostic accuracy were calculated for ID NOW against Aptima TMA. This study was conducted during a period of alpha and delta strain predominance. Results19,698 ID NOW assays were performed, of which 12,821 had an Aptima TMA assay performed within 24 hours. ID NOW had sensitivity of 85.2 % (95 % CI, 82.2–87.9) and specificity of 99.6 % (95 % CI, 99.4–99.7) compared with the reference assay. The overall PPV was 91.0 % (95 % CI, 88.5–93.0) and the overall NPV was 99.3 % (95 % CI, 99.1–99.4). ConclusionsID NOW offers a valid diagnostic tool to detect SARS-CoV-2, performing comparably to a reference laboratory-based assay which takes longer to provide results.

Recent Uses of Paper Microfluidics in Isothermal Nucleic Acid Amplification Tests.

Isothermal nucleic acid amplification tests have recently gained popularity over polymerase chain reaction (PCR), as they only require a constant temperature and significantly simplify nucleic acid amplification. Recently, numerous attempts have been made to incorporate paper microfluidics into these isothermal amplification tests. Paper microfluidics (including lateral flow strips) have been used to extract nucleic acids, amplify the target gene, and detect amplified products, all toward automating the process. We investigated the literature from 2020 to the present, i.e., since the onset of the COVID-19 pandemic, during which a significant surge in isothermal amplification tests has been observed. Paper microfluidic detection has been used extensively for recombinase polymerase amplification (RPA) and its related methods, along with loop-mediated isothermal amplification (LAMP) and rolling circle amplification (RCA). Detection was conducted primarily with colorimetric and fluorometric methods, although a few publications demonstrated flow distance- and surface-enhanced Raman spectroscopic (SERS)-based detection. A good number of publications could be found that demonstrated both amplification and detection on paper microfluidic platforms. A small number of publications could be found that showed extraction or all three procedures (i.e., fully integrated systems) on paper microfluidic platforms, necessitating the need for future work.

Toward Continuous Molecular Testing Using Gold-Coated Threads as Multi-Target Electrochemical Biosensors.

Analytical systems based on isothermal nucleic acid amplification tests (NAATs) paired with electroanalytical detection enable cost-effective, sensitive, and specific digital pathogen detection for various in situ applications such as point-of-care medical diagnostics, food safety monitoring, and environmental surveillance. Self-assembled monolayers (SAMs) on gold surfaces are reliable platforms for electroanalytical DNA biosensors. However, the lack of automation and scalability often limits traditional chip-based systems. To address these challenges, we propose a continuous thread-based device that enables multiple electrochemical readings on a functionalized working electrode Au thread with a single connection point. We demonstrate the possibility of rolling the thread on a spool, which enables easy manipulation in a roll-to-roll architecture for high-throughput applications. As a proof of concept, we have demonstrated the detection of recombinase polymerase amplification (RPA) isothermally amplified DNA from the two toxic microalgae species Ostreopsis cf. ovata and Ostreopsis cf. siamensis by performing a sandwich hybridization assay (SHA) with electrochemical readout.

An integrated isothermal nucleic acid amplification test to detect HPV16 and HPV18 DNA in resource-limited settings.

High-risk human papillomavirus (HPV) DNA testing is widely acknowledged as the most sensitive cervical cancer screening method but has limited availability in resource-limited settings, where the burden of cervical cancer is highest. Recently, HPV DNA tests have been developed for use in resource-limited settings, but they remain too costly for widespread use and require instruments that are often limited to centralized laboratories. To help meet the global need for low-cost cervical cancer screening, we developed a prototype, sample-to-answer, point-of-care test for HPV16 and HPV18 DNA. Our test relies on isothermal DNA amplification and lateral flow detection, two technologies that reduce the need for complex instrumentation. We integrated all test components into a low-cost, manufacturable platform, and performance of the integrated test was evaluated with synthetic samples, provider-collected clinical samples in a high-resource setting in the United States, and self-collected clinical samples in a low-resource setting in Mozambique. We demonstrated a clinically relevant limit of detection of 1000 HPV16 or HPV18 DNA copies per test. The test requires six user steps, yields results in 45 min, and can be performed using a benchtop instrument and minicentrifuge by minimally trained personnel. The projected per-test cost is <$5, and the projected instrumentation cost is <$1000. These results show the feasibility of a sample-to-answer, point-of-care HPV DNA test. With the inclusion of other HPV types, this test has the potential to fill a critical gap for decentralized and globally accessible cervical cancer screening.

Advances in paper based isothermal nucleic acid amplification tests for water-related infectious diseases

Water-associated or water-related infectious disease outbreaks are caused by pathogens such as bacteria, viruses, and protozoa, which can be transmitted through contaminated water sources, poor sanitation practices, or insect vectors. Low- and middle-income countries bear the major burden of these infections due to inadequate hygiene and subpar laboratory facilities, making it challenging to monitor and detect infections in a timely manner. However, even developed countries are not immune to these diseases, as inadequate wastewater management and contaminated drinking water supplies can also contribute to disease outbreaks. Nucleic acid amplification tests have proven to be effective for early disease intervention and surveillance of both new and existing diseases. In recent years, paper-based diagnostic devices have made significant progress and become an essential tool in detecting and managing water-associated infectious diseases. In this review, we have highlighted the importance of paper and its variants as a diagnostic tool and discussed the properties, designs, modifications, and various paper-based device formats developed and used for detecting water-associated pathogens.

Disposable platform for bacterial lysis and nucleic acid amplification based on a single USB-powered printed circuit board.

Recent advances in electronics and microfluidics have enabled several research groups to develop fully integrated, sample-to-result isothermal nucleic acid amplification test (NAAT) platforms for the point of care. However, high component counts and costs have limited translation of these platforms beyond the clinic to low-resource settings-including homes. Many NAATs include complex, multi-component heater electronics based on flex circuits or multiple printed circuit boards (PCBs) to support essential NAAT steps such as lysis, sample deactivation, and nucleic acid amplification. In contrast, current commercial assays for home use, such as those for pregnancy or ovulation that include electronics, typically have just one onboard PCB. This work describes a generalizable strategy to integrate all heaters and the electronics needed to control them onto a single low-cost, USB-powered PCB. We built a multiplexable disposable NAAT ("MD NAAT") platform that applies these principles, integrating small-area heaters that heat small regions to near-boiling (for pathogen lysis and deactivation) and large-area heaters (for amplification) on the same PCB. We show that both classes of heaters have high intra-board and inter-device reproducibility despite only heating a NAAT cartridge from below. We validated the small-area heaters by lysing methicillin-resistant Staphylococcus aureus (MRSA) cells and the large-area heaters by performing two types of isothermal NAATs (isothermal strand displacement amplification (iSDA) and loop-mediated isothermal amplification (LAMP)). These results demonstrate the merit of integrating NAAT heaters and control electronics onto a single printed circuit board and are a step toward translating NAATs to the home.

Paper-Based Loop Mediated Isothermal Amplification (LAMP) Platforms: Integrating the Versatility of Paper Microfluidics with Accuracy of Nucleic Acid Amplification Tests

Paper-based diagnostics offer a promising alternative to traditional diagnostic methods for point-of-care use due to their low cost, ease of use, portability, rapid results, versatility, and low environmental impact. While paper-based serology tests in the form of lateral flow assays can provide rapid test results for past pathogen exposure, they currently lack the accuracy and sensitivity offered by molecular diagnostic tests such as the polymerase chain reaction (PCR). Loop-mediated isothermal amplification (LAMP)—an isothermal nucleic acid amplification test (NAAT)—provides PCR-like performance while simultaneously reducing the instrumentation and assay complexity associated with PCR. In this review, we discuss a newly emerging class of paper-based LAMP platforms that integrates the versatility of paper microfluidics with the accuracy of NAATs. Since its first adoption in 2015, we have discussed all paper-based LAMP platforms in terms of the paper substrates, reagent incorporation techniques, paper platform design, heating hardware, detection methods, and sensitivity and specificity of paper-based LAMP assays. We conclude by identifying the current challenges and future prospects of paper-based NAATs.

Nucleic acid amplification test (NAAT) conducted in a microfluidic chip to differentiate between various ginseng species.

Panax ginseng and Panax quinquefolius have different medicinal properties and market values; however, they can be difficult to distinguish from one another based on physical appearances alone. Therefore, a molecular test that can be performed in commercial settings is needed to overcome this difficulty. A locus that contains a single nucleotide polymorphism (SNP) site to differentiate between P. ginseng and P. quinquefolius has been selected. An isothermal nucleic acid amplification test (NAAT) has been developed for use in a microfluidic chip; this NAAT method, which is based on lesion-induced DNA amplification (LIDA), amplifies the extracted plant genomic samples and enhances the detection of specific SNPs. This NAAT method was used to authenticate five ginseng root samples which indicated that two of the five samples appear to be mislabeled. These authentication results were consistent with those obtained from next generation sequencing (NGS) although this molecular test is more affordable and faster than NGS.

Diagnostic test property of transcription-reverse transcription concerted reaction reagent TRCReady® SARS-CoV-2 i using nasopharyngeal swab samples

TRCReady® SARS-CoV-2 i is a reagent for transcription-reverse transcription concerted reaction (TRC) to detect SARS-CoV-2 N2 gene, used with the automated rapid isothermal nucleic acid amplification test (NAAT) analyzer TRCReady®-80. Sensitivity and specificity of TRCReady® SARS-CoV-2 i was assessed by comparison with the results of real-time reverse transcription-polymerase chain reaction (RT-PCR) using nasopharyngeal swab samples. From November 2020 to March 2021, a total of 441 nasopharyngeal swabs were obtained and analyzed both with TRCReady® SARS-CoV-2 i and RT-PCR. Sensitivity and specificity of TRCReady® SARS-CoV-2 i were 94.6% (53/56) and 99.2% (382/385), respectively. Reaction time to positivity of TRCReady® SARS-CoV-2 i ranged from 1.166 to 9.805 (median: 2.887) min, and minimum detection sensitivity of TRCReady® SARS-CoV-2 i was 9 copies per test, with reaction time as 5.014 min. Detection of SARS-CoV-2 gene from nasopharyngeal swab sample using TRCReady® SARS-CoV-2 i shows comparative diagnostic test accuracy with RT-PCR, and can be used as a useful test to diagnose SARS-CoV-2 infection.

Real-time monitoring of isothermal nucleic acid amplification on a smartphone by using a portable electrochemical device for home-testing of SARS-CoV-2

Home-testing of SARS-CoV-2 is an ideal approach for controlling the pandemic of COVID-19 and alleviating the shortage of medical resource caused by this acute infectious disease. Herein, a portable device that enables real-time monitoring of isothermal nucleic acid amplification tests (INAATs) through the electrochemistry method was fabricated for home-testing of SARS-CoV-2. First, a disposable plug-and-play pH-sensitive potentiometric sensor that matches this electrochemical INAATs (E-INAATs) device was designed to allow the label-free pH sensing detection of nucleic acid. By applying Nafion film on the polyaniline-based working electrode, this sensor exhibited an excellent linear potentiometric response to pH value in the range of 6.0–8.5 with a slope of −37.45 ± 1.96 mV/pH unit. A Bluetooth module was integrated into this device to enable the users real-time monitoring INAATs on their smartphones at home. Moreover, by presetting criteria, the detection results could be automatically judged by the device to avoid human errors. Finally, the utility of this E-INAATs device was demonstrated by detecting the presence of SARS-CoV-2 nucleocapsid protein gene in artificial samples with a sensitivity of 2 × 102 copies/test within 25 min, which was comparable with fluorescence and colorimetric assay. This portable, easy-operated, sensitive, and affordable device is particularly desirable for the full integration of household SARS-CoV-2 detection products and will open a new prospect for the control of infectious diseases via electrochemical NAATs.

Evaluation of indirect sequence-specific magneto-extraction-aided LAMP for fluorescence and electrochemical SARS-CoV-2 nucleic acid detection

Nucleic acid amplification tests (NAATs) such as quantitative real-time reverse transcriptase PCR (qRT-PCR) or isothermal NAATs (iNAATs) such as loop-mediated isothermal amplification (LAMP) require pure nucleic acid free of any polymerase inhibitors as its substrate. This in turn, warrants the use of spin-column mediated extraction with centralized high-speed centrifuges. Additionally, the utilization of centralized real-time fluorescence readout and TaqMan-like molecular probes in qRT-PCR and real-time LAMP add cost and restrict their deployment. To circumvent these disadvantages, we report a novel sample-to-answer workflow comprising an indirect sequence-specific magneto-extraction (also referred to as magnetocapture, magneto-preconcentration, or magneto-enrichment) for detecting SARS-CoV-2 nucleic acid. It was followed by in situ fluorescence or electrochemical LAMP. After in silico validation of the approach's sequence selectivity against SARS-CoV-2 variants of concern, the comparative performance of indirect and direct magnetocapture in detecting SARS-CoV-2 nucleic acid in the presence of excess host nucleic acid or serum was probed. After proven superior, the sensitivity of the indirect sequence-specific magnetocapture in conjunction with electrochemical LAMP was investigated. In each case, its sensitivity was assessed through the detection of clinically relevant 102 and 103 copies of target nucleic acid. Overall, a highly specific nucleic acid detection method was established that can be accommodated for either centralized real-time SYBR-based fluorescence LAMP or portable electrochemical LAMP.

Point-of-Care Diagnostic Tools for Surveillance of SARS-CoV-2 Infections.

Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is a recently emerged and highly contagious virus that causes coronavirus disease 2019 (COVID-19). As of August 24, 2021, there were more than 212 million confirmed COVID-19 cases and nearly 4.4 million deaths reported globally. Early diagnosis and isolation of infected individuals remains one of the most effective public health interventions to control SARS-CoV-2 spread and for effective clinical management of COVID-19 cases. Currently, SARS-CoV-2 infection is diagnosed presumptively based on clinical symptoms and confirmed by detecting the viral RNA in respiratory samples using reverse transcription polymerase chain reaction (RT-PCR). Standard RT-PCR protocols are time consuming, expensive, and technically demanding, which makes them a poor choice for large scale and point-of-care screening in resource-poor settings. Recently developed isothermal nucleic acid amplification tests (iNAAT), antigen and/or serological tests are cost-effective to scale COVID-19 testing at the point-of-care (PoC) and for surveillance activities. This review discusses the development of rapid PoC molecular tools for the detection and surveillance of SARS-CoV-2 infections.

Rolling Circle Amplification in Integrated Microsystems: An Uncut Gem toward Massively Multiplexed Pathogen Diagnostics and Genotyping.

ConspectusThe development of robust methods allowing the precise detection of specific nucleic acid sequences is of major societal relevance, paving the way for significant advances in biotechnology and biomedical engineering. These range from a better understanding of human disease at a molecular level, allowing the discovery and development of novel biopharmaceuticals and vaccines, to the improvement of biotechnological processes providing improved food quality and safety, efficient green fuels, and smart textiles. Among these applications, the significance of pathogen diagnostics as the main focus of this Account has become particularly clear during the recent SARS-CoV-2 pandemic. In this context, while RT-PCR is the gold standard method for unambiguous detection of genetic material from pathogens, other isothermal amplification alternatives circumventing rapid heating–cooling cycles up to ∼95 °C are appealing to facilitate the translation of the assay into point-of-care (PoC) analytical platforms. Furthermore, the possibility of routinely multiplexing the detection of tens to hundreds of target sequences with single base pair specificity, currently not met by state-of-the-art methods available in clinical laboratories, would be instrumental along the path to tackle emergent viral variants and antimicrobial resistance genes. Here, we advocate that padlock probes (PLPs), first reported by Nilsson et al. in 1994, coupled with rolling circle amplification (RCA), termed here as PLP-RCA, is an underexploited technology in current arena of isothermal nucleic acid amplification tests (NAATs) providing an unprecedented degree of multiplexing, specificity, versatility, and amenability to integration in miniaturized PoC platforms. Furthermore, the intrinsically digital amplification of PLP-RCA retains spatial information and opens new avenues in the exploration of pathogenesis with spatial multiomics analysis of infected cells and tissue.The Account starts by introducing PLP-RCA in a nutshell focusing individually on the three main assay steps, namely, (1) PLP design and ligation mechanism, (2) RCA after probe ligation, and (3) detection of the RCA products. Each subject is touched upon succinctly but with sufficient detail for the reader to appreciate some assay intricacies and degree of versatility depending on the analytical challenge at hand. After familiarizing the reader with the method, we discuss specific examples of research in our group and others using PLP-RCA for viral, bacterial, and fungal diagnostics in a variety of clinical contexts, including the genotyping of antibiotic resistance genes and viral subtyping. Then, we dissect key developments in the miniaturization and integration of PLP-RCA to minimize user input, maximize analysis throughput, and expedite the time to results, ultimately aiming at PoC applications. These developments include molecular enrichment for maximum sensitivity, spatial arrays to maximize analytical throughput, automation of liquid handling to streamline the analytical workflow in miniaturized devices, and seamless integration of signal transduction to translate RCA product titers (and ideally spatial information) into a readable output. Finally, we position PLP-RCA in the current landscape of NAATs and furnish a systematic Strengths, Weaknesses, Opportunities and Threats analysis to shine light upon unpolished edges to uncover the gem with potential for ubiquitous, precise, and unbiased pathogen diagnostics.