Ion Transport Research Articles

Self-Adaptive Graphdiyne/Sn Interface for High-Performance Sodium Storage.

Efficiently reconciling the substantial volume strain with maintaining the stabilities of both interfacial protection and three-dimensional (3D) conductive networks is a scientific and technical challenge in developing tin-based anodes for sodium ion storage. To address this issue, a proof-of-concept self-adaptive protection for the Sn anode is designed, taking advantage of the arbitrary substrate growth of graphdiyne. This protective layer, employing a flexible chain doping strategy, combines the benefits of 2D graphdiyne and linear chain structures to achieve 2D mechanical stability, electronic and ion conductions, ion selectivity, adequate elongation, and flexibility. It establishes close contact with the Sn particles and can adapt to dynamic size changes while effectively facilitating both electronic and ion transports. It successfully mitigates the detrimental effects of particle pulverization and coarsening induced by large-volume changes. The as-obtained Sn electrodes demonstrate exceptional stability, enduring 1800 cycles at a high current density of 2.5 A g-1. This strategy promises to address the general issues associated with large-strain electrodes in next-generation of high-energy-density batteries.

Indium Tin Oxide Induced Internal Positive Feedback and Indium Ion Transport in Perovskite Solar Cells.

Stability is the most pressing challenge hindering the commercialization of perovskite solar cells (PSCs), and previous efforts focused more on enhancing the resistance of PSCs to external stimulus. Here, we found that the indium tin oxide (ITO) will deteriorate the photovoltaic performance of PSCs through positive feedback cycles. Specifically, the perovskite degradation products will cross the electron transport layer to chemically etch the electrode ITO to generate In3+, which will migrate upwards into the perovskite film. Then, the reaction that corrodes ITO consumes the decomposition products of perovskite and shifts the balance of the perovskite decomposition reaction, further promoting the degradation and thus falling into a positive feedback cycle. Moreover, the In3+ in the perovskite film was found to accumulate at the upper surface, which would lead to n-type doping of perovskite film to form the energy barrier for interface carrier extraction. Subsequently, the chelating molecule ethylenediaminetetraacetic acid disodium salt (EDTA-2Na) was introduced onto ITO to firmly chelate the In3+ and prevent it from migrating upward, thus breaking this internal positive feedback cycle and significantly enhancing the efficiency and stability of PSCs. This work provides new perspectives for understanding the mechanism of photovoltaic performance loss and ionic transport in PSCs.

Investigating the role of network former interactions on charge carrier diffusivity in glasses

Ionic transport is a critical property for the glass industry, since emerging applications such as sensors, batteries, and electric melting are based on the phenomenon. Short-range interactions (anion-charge carrier) have not been able to explain the total activation barrier observed experimentally, and, as such, it is critical to understand the larger role of all ions in a glass, not just the carrier and the ‘site’ ions. This research focuses on the role of network formers and their impact on diffusion in glasses, something that current models lack an explicit explanation of. Atomistic simulations with randomly generated parameters for the cation potentials and classical simulations were used to determine the diffusion coefficients and activation energies for synthetic network formers. Using this database, explainable machine learning algorithms were employed to explore network former interactions and determine which parameters are the most influential for ion diffusion. Results suggest that the bond length of the cations changes the geometry of the structure contributing the greatest to cation-modifier interactions.

Indium Tin Oxide Induced Internal Positive Feedback and Indium Ion Transport in Perovskite Solar Cells

Stability is the most pressing challenge hindering the commercialization of perovskite solar cells (PSCs), and previous efforts focused more on enhancing the resistance of PSCs to external stimulus. Here, we found that the indium tin oxide (ITO) will deteriorate the photovoltaic performance of PSCs through positive feedback cycles. Specifically, the perovskite degradation products will cross the electron transport layer to chemically etch the electrode ITO to generate In3+, which will migrate upwards into the perovskite film. Then, the reaction that corrodes ITO consumes the decomposition products of perovskite and shifts the balance of the perovskite decomposition reaction, further promoting the degradation and thus falling into a positive feedback cycle. Moreover, the In3+ in the perovskite film was found to accumulate at the upper surface, which would lead to n‐type doping of perovskite film to form the energy barrier for interface carrier extraction. Subsequently, the chelating molecule ethylenediaminetetraacetic acid disodium salt (EDTA‐2Na) was introduced onto ITO to firmly chelate the In3+ and prevent it from migrating upward, thus breaking this internal positive feedback cycle and significantly enhancing the efficiency and stability of PSCs. This work provides new perspectives for understanding the mechanism of photovoltaic performance loss and ionic transport in PSCs.

Order-disorder structural engineering of vanadium oxide anode: Balancing ionic and electronic dynamic for fast-charging aqueous Li-ion battery

Fast-charging aqueous lithium-ion batteries (ALIBs) are considered as promising energy storage devices because of their non-flammability and environmentally friendly characteristics. However, how to balance the ionic and electronic dynamics for fast charging reactions remains a significant challenge under the current research status. Here, the order-disorder structural engineering strategy is adopted to resolve this issue, considering the difference between ion and electron transportation in the crystalline and amorphous phases, respectively. Vanadium oxide anodes were developed with optimized ionic and electronic dynamics by using an organic-inorganic hybrid material as a precursor along with refined regulation on the calcination temperature and time. This facile and large-scale extendable approach harnesses the benefits of the order-disorder structure to optimize Li+ storage efficiency and facilitate the high reversibility of Li-ion during fast charging. Consequently, the order-disorder V2O5-based full cell with LiMn2O4 as a cathode exhibits high specific capacity (262.71 mAh g−1, 89.35 % of the theoretical capacity of V2O5), high energy density (166.04 Wh kg−1), fast Li-ion diffusion coefficient (7.34×10−5 cm2 s−1) and fast-charging performance (only 6 min achieves 82.84 % of initial state-of-charge capacity). This work explores the ionic and electronic dynamic of ordered-disorder structure and offers new insights into the development of fast-charging metal ion batteries.

Gas-Phase-Induced Engineering for Fabrication of 3D Hierarchical Porous Nickel and Its Application toward High-Performance Supercapacitors.

Commercial nickel foam (NF), which is composed of numerous interconnected ligaments and hundred-micron pores, is widely acknowledged as a current collector/electrode material for catalysis, sensing, and energy storage applications. However, the commonly used NF often does not work satisfactorily due to its smooth surface and hollow structure of the ligaments. Herein, a gas-phase-induced engineering, two-step gaseous oxidation-reduction (GOR) is presented to directly transform the thin-walled hollow ligament of NF into a three-dimensional (3D) nanoporous prism structure, resulting in the fabrication of a unique hierarchical porous nickel foam (HPNF). This 3D nanoporous architecture is achieved by utilizing the spontaneous reconstruction of nickel atoms during volume expansion and contraction in the GOR process. The process avoids the involution of acid-base corrosion and sacrificial components, which are facile, environmentally friendly, and suitable for large-scale fabrication. Furthermore, MnO2 is electrochemically deposited on the HPNF to form a supercapacitor electrode (HPNF/MnO2). Because of the fully open structure for ion transport, superhydrophilic properties, and the increased contact area between MnO2 and the current collector, the HPNF/MnO2 electrode exhibits a high specific capacitance of 997.5 F g-1 at 3 A g-1 and remarkable cycling stability with 99.6% capacitance retention after 20000 cycles in 0.1 M Na2SO4 electrolyte, outperforming most MnO2-based supercapacitor electrodes.

The translocation of a chloride channel from the Golgi to the plasma membrane helps plants adapt to salt stress

A key mechanism employed by plants to adapt to salinity stress involves maintaining ion homeostasis via the actions of ion transporters. While the function of cation transporters in maintaining ion homeostasis in plants has been extensively studied, little is known about the roles of their anion counterparts in this process. Here, we describe a mechanism of salt adaptation in plants. We characterized the chloride channel (CLC) gene AtCLCf, whose expression is regulated by WRKY transcription factor under salt stress in Arabidopsis thaliana. Loss-of-function atclcf seedlings show increased sensitivity to salt, whereas AtCLCf overexpression confers enhanced resistance to salt stress. Salt stress induces the translocation of GFP-AtCLCf fusion protein to the plasma membrane (PM). Blocking AtCLCf translocation using the exocytosis inhibitor brefeldin-A or mutating the small GTPase gene AtRABA1b/BEX5 (RAS GENES FROM RAT BRAINA1b homolog) increases salt sensitivity in plants. Electrophysiology and liposome-based assays confirm the Cl−/H+ antiport function of AtCLCf. Therefore, we have uncovered a mechanism of plant adaptation to salt stress involving the NaCl-induced translocation of AtCLCf to the PM, thus facilitating Cl− removal at the roots, and increasing the plant’s salinity tolerance.

Numerical Simulation of Flow Field Structure of Vanadium Redox Flow Battery and its Optimization on Mass Transfer Performance

Abstract The structural design of the flow channel of a redox flow battery directly affects ion transport efficiency, electrode overpotential, and stack performance during charge-discharge cycles. A tapered hierarchical interdigitated flow field design that has independent flow channel structures for different levels of flow was developed in this work. Especially, the secondary branch channels are the tapered type and the corresponding cross-sections are gradually reduced along the flow direction, which is beneficial for improving the flow rate at the end of channels and enhancing mass transfer. The performances of a vanadium redox flow battery with interdigitated flow field, hierarchical interdigitated flow field, and tapered hierarchical interdigitated flow field were evaluated through 3D numerical model. The results showed that at 240 mA/cm2 and 6 mL/s, the pump-based efficiency of the hierarchical interdigitated flow field increased by 4%-7% compared with the interdigitated flow field. Furthermore, the pump-based efficiency with tapered hierarchical interdigitated flow field increased by 1.6%-3% compared with the hierarchical interdigitated flow field. This indicates that the tapered hierarchical interdigitated flow field shows further advantages in redox flow battery applications.

Design Strategies for Anti‐Freeze Electrolytes in Aqueous Energy Storage Devices at Low Temperatures

AbstractWith the continuous development of electrochemical energy storage technology, especially in the current pursuit of environmental sustainability and safety, aqueous energy storage devices, due to their high safety, environmental friendliness, and cost‐effectiveness, are becoming an important direction of development in the field of energy storage. Diverse application scenarios require that energy storage systems be capable of continuous power supply under low temperature conditions. However, conventional aqueous electrolytes freeze at extremely low temperatures, causing limited ion transport and slow reaction kinetics, degrading the performance of the energy storage system. The design of low‐temperature anti‐freeze aqueous electrolytes has become an effective way to address this issue. In this review, the deep connection between hydrogen bonds (HBs) interactions in aqueous electrolytes and the liquid‐to‐solid conversion process, and the fundamental principles of the anti‐freeze mechanism is first explored. Subsequently, a systematic categorization and discussion of the design strategies for low‐temperature anti‐freeze aqueous electrolytes are conducted. Finally, potential directions are proposed. This review aims to provide comprehensive scientific guidance and technical reference for the development of anti‐freeze aqueous electrolytes with excellent low‐temperature performance, thereby promoting the application and innovation of aqueous energy storage devices in low‐temperature environments.

Exploring the underlying mechanisms of enteritis impact on golden pompano (Trachinotus ovatus) through multi-omics analysis

Enteritis posed a significant health challenge to golden pompano (Trachinotus ovatus) populations. In this research, a comprehensive multi-omics strategy was implemented to elucidate the pathogenesis of enteritis by comparing both healthy and affected golden pompano. Histologically, enteritis was characterized by villi adhesion and increased clustering after inflammation. Analysis of the intestinal microbiota revealed a significant increase (P < 0.05) in the abundance of specific bacterial strains, including Photobacterium and Salinivibrio, in diseased fish compared to the healthy group. Metabolomic analysis identified 5479 altered metabolites, with significant impacts on terpenoid and polyketide metabolism, as well as lipid metabolism (P < 0.05). Additionally, the concentrations of several compounds such as calcitetrol, vitamin D2, arachidonic acid, and linoleic acid were significantly reduced in the intestines of diseased fish post-enteritis (P < 0.05), with the detection of harmful substances such as Efonidipine. In transcriptomic profiling, enteritis induced 68 upregulated and 73 downregulated genes, predominantly affecting steroid hormone receptor activity (P < 0.05). KEGG pathway enrichment analysis highlighted upregulation of SQLE and CYP51 in steroidogenesis, while the HSV-1 associated MHC1 gene exhibited significant downregulation. Integration of multi-omics results suggested a potential pathogenic mechanism: enteritis may have resulted from concurrent infection of harmful bacteria, specifically Photobacterium and Salinivibrio, along with HSV-1. Efonidipine production within the intestinal tract may have blocked certain calcium ion channels, leading to downregulation of MHC1 gene expression and reduced extracellular immune recognition. Upregulation of SQLE and CYP51 genes stimulated steroid hormone synthesis within cells, which, upon binding to G protein-coupled receptors, influenced calcium ion transport, inhibited immune activation reactions, and further reduced intracellular synthesis of anti-inflammatory substances like arachidonic acid. Ultimately, this cascade led to inflammation progression, weakened intestinal peristalsis, and villi adhesion. This study utilized multi-level omics detection to investigate the pathological symptoms of enteritis and proposed a plausible pathogenic mechanism, providing innovative insights into enteritis verification and treatment in offshore cage culture of golden pompano.

Toward Selective Transport of Monovalent Metal Ions with High Permeability Based on Crown Ether-Encapsulated Metal-Organic Framework Sub-Nanochannels.

Achieving selective transport of monovalent metal ions with high precision and permeability analogues to biological protein ion channels has long been explored for fundamental research and various applications, such as ion sieving, mineral extraction, and energy harvesting and conversion. However, it still remains a significant challenge to construct artificial nanofluidic devices to realize the trade-off effects between selective ion transportation and high ion permeability. In this work, we report a bioinspired functional micropipet with in situ growth of crown ether-encapsulated metal-organic frameworks (MOFs) inside the tip and realize selective transport of monovalent metal ions. The functional ion-selective micropipet with sub-nanochannels was constructed by the interfacial growth method with the formation of composite MOFs consisting of ZIF-8 and 15-crown-5. The resulting micropipet device exhibited obvious monovalent ion selectivity and high flux of Li+ due to the synergistic effects of size sieving in subnanoconfined space and specific coordination of 15-crown-5 toward Na+. The selectivity of Li+/Na+, Li+/K+, Li+/Ca2+, and Li+/Mg2+ with 15-crown-5@ZIF-8-functionalized micropipet reached 3.9, 5.2, 105.8, and 122.4, respectively, which had an obvious enhancement compared to that with ZIF-8. Notably, the ion flux of Li+ can reach up to 93.8 ± 3.6 mol h-1·m-2 that is much higher than previously reported values. Furthermore, the functional micropipet with 15-crown-5@ZIF-8 sub-nanochannels exhibited stable Li+ selectivity under various conditions, such as different ion concentrations, pH values, and mixed ion solutions. This work not only provides new opportunities for the development of MOF-based nanofluidic devices for selective ion transport but also facilitates the promising practical applications in lithium extraction from salt-like brines, sewage treatment, and other related aspects.

Enhanced Supercapacitive Performance in Catalyst‐Free Binary Composite SnO2–RuO2 Nanostructured Thin Films for Symmetric Supercapacitor Device

In the present work, thin film electrodes of ruthenium oxide (RuO2), tin oxide (SnO2), and their composite SnO2–RuO2 are deposited on 304 stainless steel substrates using pulsed laser deposition (PLD). These nanostructured electrodes are then evaluated for their suitability in electrochemical energy storage applications. A symmetric supercapacitor device (SSD) is constructed using the SnO2–RuO2 composite electrodes. Compared to individual SnO2 and RuO2 electrodes, the composite electrodes exhibit enhanced specific capacitance and cycle life. This improvement is attributed to modifications in surface morphology and electronic properties. This modified surface morphology of the composite electrode, creates favourable conditions for electrolyte interaction and ion transport, ultimately contributing to the observed increase in specific capacitance. Specifically, the composite electrode demonstrates a specific capacitance of 170.2 Fg−1 at a current density of 0.1 mA cm−2, outperforming SnO2 (37.4 Fg−1). The SnO2–RuO2//SnO2–RuO2 SSD exhibites a specific capacitance of 70.0 Fg−1 at a current density of 0.1 mA cm−2, coupled with energy density and power density values of 19.05 Wh kg−1 and 645 W kg−1, respectively, within a voltage window of 1.4 V. The SSD displays an impressive capacitive retention of 81.27% over 10 000 cycles, indicating its potential for practical energy storage applications.

Bi-Interlayer Strategy for Modulating NiCoP-Based Heterostructure toward High-Performance Aqueous Energy Storage Devices.

Nickel-cobalt (NiCo) phosphides (NCPs) possess high electrochemical activity, which makes them promising candidates for electrode materials in aqueous energy storage devices, such as supercapacitors and zinc (Zn) batteries. However, the actual specific capacitance and rate capability of NCPs require further improvement, which can be achieved through reasonable heterostructural design and loading conditions of active materials on substrates. Herein, novel hierarchical Bi-NCP heterogeneous structures with built-in electric fields consisting of bismuth (Bi) interlayers (electrodeposited on carbon cloth (CC)) are designed and fabricated to ensure the formation of uniform high-load layered active materials for efficient charge and ion transport. The resulting CC/Bi-NCP electrodes show a uniform, continuous, and high mass loading (>3.5mg) with a superior capacitance reaching 1200 Fg-1 at 1 Ag-1 and 4129 mFcm-2 at 1 mAcm-2 combined with high-rate capability and durable cyclic stability. Moreover, assembled hybrid supercapacitors (HSCs), supercapatteries, and alkaline Zn-ion (AZBs) batteries constructed using these electrodes deliver high energy densities of 64.4, 81.8, and 319.1 Whkg-1, respectively. Overall, the constructed NCPs with excellent aqueous energy storage performance have the potential for the development of novel transition metal-based heterostructure electrodes for advanced energy devices.

Sub-nanopores enabling optimized ion storage performance of carbon cathodes for Zn-ion hybrid supercapacitors

Aqueous Zn-ion hybrid supercapacitors (ZHSs) are attracting significant attention as a promising electrochemical energy storage system. However, carbon cathodes of ZHSs exhibit unsatisfactory ion storage performance due to the large size of hydrated Zn-ions (e.g., [Zn(H2O)6]2+), which encumbers compact ion arrangement and rapid ion transport at the carbon-electrolyte interfaces. Herein, a porous carbon material (HMFC) with abundant sub-nanopores is synthesized to optimize the ion storage performance of the carbon cathode in ZHSs, in which the sub-nanopores effectively promote the dehydration of hydrated Zn-ions and thus optimize the ion storage performance of the carbon cathode in ZHSs. A novel strategy is proposed to study the dehydration behaviors of hydrated Zn-ions in carbon cathodes, including quantitatively determining the desolvation activation energy of hydrated Zn-ions and in-situ monitoring active water content at the carbon-electrolyte interface. The sub-nanopores-induced desolvation effect is verified, and its coupling with large specific surface area and hierarchically porous structure endows the HMFC cathode with improved electrochemical performance, including a 53 % capacity increase compared to the carbon cathode counterpart without sub-nanopores, fast charge/discharge ability that can output 46.0 Wh/kg energy within only 4.4 s, and 98.2 % capacity retention over 20,000 charge/discharge cycles. This work provides new insights into the rational design of porous carbon cathode materials toward high-performance ZHSs.

Pb nanospheres encapsulated in metal–organic frameworks-derived porous carbon as anode for high-performance sodium-ion batteries

Alloying-type anode materials are considered promising candidates for sodium-ion batteries (SIBs) due to their high theoretical capacities. However, their application is limited by the severe capacity decay stemming from dramatic volume changes during Na+ insertion/extraction processes. Here, Pb nanospheres encapsulated in a carbon skeleton (Pb@C) were successfully synthesized via a facile metal–organic frameworks (MOFs)-derived method and used as anodes for SIBs. The nanosized Pb particles are uniformly incorporated into the porous carbon framework, effectively mitigating volume changes and enhancing Na+ ion transport during discharging/charging. Benefiting from this unique architecture, a reversible capacity of 334.2 mAh g−1 at 2 A g−1 is achieved after 6000 cycles corresponding to an impressive 88.2 % capacity retention and a minimal capacity loss of 0.00748 % per cycle. Furthermore, a high-performance full sodium-ion battery of Pb@C//NVPF was constructed, demonstrating a high energy density of 291 Wh kg−1 and power density of 175 W kg−1. This facile MOFs-derived method offers insights into the design of high-capacity alloy-type anode materials using Pb sources, opening up new possibilities for innovative approaches to Pb recycling and pollution prevention.

High correlated color temperature artificial lighting impairs retinal pigment epithelium integrity and chloride ion transport: A potential mechanism for choroidal thinning

Among the environmental factors contributing to myopia, the role of correlated color temperature (CCT) of ambient light emerges as a key element warranting in-depth investigation. The choroid, a highly vascularized and dynamic structure, often undergoes thinning during the progression of myopia, though the precise mechanism remains elusive. The retinal pigment epithelium (RPE), the outermost layer of the retina, plays a pivotal role in regulating the transport of ion and fluid between the subretinal space and the choroid. A hypothesis suggests that variations in choroidal thickness (ChT) may be modulated by transepithelial fluid movement across the RPE. Our experimental results demonstrate that high CCT illumination significantly compromised the integrity of tight junctions in the RPE and disrupted chloride ion transport. This functional impairment of the RPE may lead to a reduction in fluid transfer across the RPE, consequently resulting in choroidal thinning and potentially accelerating axial elongation. Our findings provide support for the crucial role of the RPE in regulating ChT. Furthermore, we emphasize the potential hazards posed by high CCT artificial illumination on the RPE, the choroid, and refractive development, underscoring the importance of developing eye-friendly artificial light sources to aid in the prevention and control of myopia.

Exploration on pharmacological mechanisms of YZP against neuropathic pain via inhibiting spinal inflammation and the rationality of its compatibility

Ethnopharmacological relevanceYuanhu Zhitong Prescription (YZP) is a well-known traditional Chinese medicine (TCM) formula for neuropathic pain (NP) therapy with a satisfying clinical efficacy. However, the underlying pharmacological mechanism and its compatibility principle remain unclear. Aim of the studyThis study aims to investigate the analgesic and compatibility mechanisms of YZP on neuropathic pain (NP) at the gene and biological process levels. Materials and methodsThe chronic constriction injury (CCI) rats were intragastrically administrated with extracts of YZP, YH and BZ separately, and then mechanical hypersensitivity were measured to evaluate the analgesic effects between YH and BZ before and after compatibility. Then, RNA-seq and bioinformatics analyses were performed to elucidate the potential mechanisms underlying YZP's analgesia and compatibility. Finally, the expression levels and significant differences of key genes were analyzed. ResultsBehaviorally, both YZP and YH effectively alleviated mechanical allodynia in CCI rats, with YZP being superior to YH. In contrast, we did not observe an analgesic effect of BZ. Genetically, YZP, YH, and BZ reversed the expression levels of 52, 34, and 42 aberrant genes in the spinal cord of CCI rats, respectively. Mechanically, YZP was revealed to alleviate NP mainly by modulating the inflammatory response and neuropeptide signaling pathway, which are the dominant effective processes of YH. Interestingly, the effective targets of YZP were especially enriched in leukocyte activation and cytokine-mediated signaling pathways. Moreover, BZ was found to exert an adjunctive effect in enhancing the analgesic effect of YH by promoting skeletal muscle tissue regeneration and modulating calcium ion transport. ConclusionsYH, as the monarch drug, plays a dominant role in the analgesic effect of YZP that effectively relieves NP by inhibiting the spinal inflammation and neuropeptide signaling pathway. BZ, as the minister drug, not only synergistically enhances analgesic processes of YH but also helps to alleviate the accompanying symptoms of NP. Consequently, YZP exerted a more potent analgesic effect than YH and BZ alone. In conclusion, our findings offer new insights into understanding the pharmacological mechanism and compatibility principle of YZP, which may support its clinical application in NP therapy.

Ion‐Conducting Molecular‐Grafted Sustainable Cellulose Quasi‐Solid Composite Electrolyte for High Stability Solid‐State Lithium‐Metal Batteries

AbstractCellulose‐based solid electrolyte possesses the characteristics of low cost, high strength, and sustainability, and has great potential in the field of solid‐state lithium metal batteries. However, the large hydrogen bonds between cellulose molecules make the molecular chains tightly arranged, and hinder the ion conduction, seriously limiting its further development. Herein, an ion‐conducting molecular grafting strategy is proposed for the fabrication of cellulose acetate quasi‐solid composite electrolyte (CLA‐CN‐LATP QCE) with a superior ionic conductivity of 1.25 × 10−3 S cm−1 at room temperature. Benefited from grafted functional molecules, the assembled symmetrical battery exhibits low polarization voltage and highly stable lithium stripping/plating cycling of more than 1200 h at 0.1 mA cm−2 current density. Moreover, it endows LFP|CLA‐CN‐LATP QCE|Li battery with excellent long‐cycle stability of 1500 cycles at 0.5 C and 25 °C and superior capacity retention of 92.1%. Importantly, this work provides an effective strategy for further opening the ion transport channel between cellulose molecular chains and improving the interface properties of electrolytes and electrodes.

Alternative splicing plays a nonredundant role in greater amberjack (Seriola dumerili) in acclimation to ambient salinity fluctuations

Alternative splicing (AS) is an important post-transcriptional mechanism for adaptation of fish to environmental stress. Here, we performed a genome-wide investigation to AS dynamics in greater amberjack (Seriola dumerili), an economical marine teleost, in response to hypo- (10 ppt) and hyper-salinity (40 ppt) stresses. Totally, 2267–2611 differentially spliced events were identified in gills and kidney upon the exposure to undesired salinity regimes. In gills, genes involved in energy metabolism, stimulus response and epithelial cell differentiation were differentially spliced in response to salinity variation, while sodium ion transport and cellular amide metabolism were enhanced in kidney to combat the adverse impacts of salinity changes. Most of these differentially spliced genes were not differentially expressed, and AS was found to regulate different biological processes from differential gene expression, indicative of the functionally nonredundant role of AS in modulating salinity acclimation in greater amberjack. Together, our study highlights the important contribution of post-transcriptional mechanisms to the adaptation of fish to ambient salinity fluctuations and provides theoretical guidance for the conservation of marine fishery resources against increasingly environmental challenges.

A “two cooking with one fish” strategy for modulating both polyaniline cathode and zinc anode towards enhanced kinetics and cycling stability for aqueous zinc ion batteries

The adverse stability of both polyaniline (PANI) and Zn anode remains a challenge to the long−term cyclability and rate capability of aqueous Zn−PANI batteries. Herein, a “two–cooking with one fish” strategy is presented to modulate both PANI cathode and Zn anode, in which nanoscale graphene sheets in cathode can promote ordered growth of PANI array, being conducive to provide large electrochemical active area and efficient transport pathways and alleviate volume variation during repeated charging/discharging process. Meanwhile, the honeycomb–like structure of graphene sheets as protective layer can accelerate zinc ion transport kinetics and suppress side reactions and zinc dendrite growth. Consequently, the optimized G/Zn symmetric cell delivers a remarkable lifespan over 1000 h at 1 mA cm−2 with 1 mAh cm−2. Furthermore, the assembled PANI/G/CC||G/Zn battery could deliver a specific capacity of 265.8 mAh g−1 at 0.2 A g−1, excellent rate capability (145.5 mAh g−1 at 20 A g−1), a maximum energy density of 246.9 W h kg−1 and power density of 8675.9 W kg−1, and especially capacity retention of 91.1 % after 10000 cycles. Combining with additional merits of low cost, eco–friendliness, and safe operation, our design will shed light on resolving the issues on cyclability and rate capability of aqueous Zn−PANI batteries.