Enhanced Supercapacitive Performance in Catalyst‐Free Binary Composite SnO2–RuO2 Nanostructured Thin Films for Symmetric Supercapacitor Device

Abstract

In the present work, thin film electrodes of ruthenium oxide (RuO2), tin oxide (SnO2), and their composite SnO2–RuO2 are deposited on 304 stainless steel substrates using pulsed laser deposition (PLD). These nanostructured electrodes are then evaluated for their suitability in electrochemical energy storage applications. A symmetric supercapacitor device (SSD) is constructed using the SnO2–RuO2 composite electrodes. Compared to individual SnO2 and RuO2 electrodes, the composite electrodes exhibit enhanced specific capacitance and cycle life. This improvement is attributed to modifications in surface morphology and electronic properties. This modified surface morphology of the composite electrode, creates favourable conditions for electrolyte interaction and ion transport, ultimately contributing to the observed increase in specific capacitance. Specifically, the composite electrode demonstrates a specific capacitance of 170.2 Fg−1 at a current density of 0.1 mA cm−2, outperforming SnO2 (37.4 Fg−1). The SnO2–RuO2//SnO2–RuO2 SSD exhibites a specific capacitance of 70.0 Fg−1 at a current density of 0.1 mA cm−2, coupled with energy density and power density values of 19.05 Wh kg−1 and 645 W kg−1, respectively, within a voltage window of 1.4 V. The SSD displays an impressive capacitive retention of 81.27% over 10 000 cycles, indicating its potential for practical energy storage applications.