Ion Transport Research Articles

Sub-millisecond lithiothermal synthesis of graphitic meso–microporous carbon

Porous carbons with concurrently high specific surface area and electronic conductivity are desirable by virtue of their desirable electron and ion transport ability, but conventional preparing methods suffer from either low yield or inferior quality carbons. Here we developed a lithiothermal approach to bottom–up synthesize highly meso–microporous graphitized carbon (MGC). The preparation can be finished in a few milliseconds by the self-propagating reaction between polytetrafluoroethylene powder and molten lithium (Li) metal, during which instant ultra-high temperature (>3000 K) was produced. This instantaneous carbon vaporization and condensation at ultra-high temperatures and in ultra-short duration enable the MGC to show a highly graphitized and continuously cross-coupled open pore structure. MGC displays superior electrochemical capacitor performance of exceptional power capability and ultralong-term cyclability. The processes used to make this carbon are readily scalable to industrial levels.

Constructing a 3D Ion Transport Channel-Based CNF Composite Film with an Intercalated Structure for Superior Performance Flexible Supercapacitors.

The weak stiffness, huge thickness, and low specific capacitance of commonly utilized flexible supercapacitors hinder their great electrochemical performance. Learning from a biomimetic interface strategy, we design flexible film electrodes based on functional intercalated structures with excellent electrochemical properties and mechanical flexibility. A composite film with high strength and flexibility is created using graphene (reduced graphene oxide (rGO)) as the plane layer, layered double metal hydroxide (LDH) as the support layer, and cellulose nanofiber (CNF) as the connection agent and flexible agent. The interlayer height can be adjusted by the ion concentration. The highly interconnected network enables excellent electron and ion transport channels, facilitating rapid ion diffusion and redox reactions. Moreover, the high flexibility and mechanical properties of the film achieve multiple folding and bending. The CNF-rGO-NiCoLDH film electrode exhibits high capacitance performance (3620.5 mF cm-2 at 2 mA cm-2), excellent mechanical properties, and high flexibility. Notably, flexible all-solid assembled CNF-rGO-NiCoLDH//rGO has an extremely high area energy density of 53.5 mWh cm-2 at a power density of 1071.2 mW cm-2, along with cycling stability of 89.8% retention after 10 000 charge-discharge cycles. This work provides a perspective for designing high-performance energy storage materials for flexible electronics and wearable devices.

Flexible ceramic based ‘paper separator’ with enhanced safety for high performance lithium-ion batteries: Probing the effect of ceramics impregnation on electrochemical performances

Cellulose is now considered as an appealing environment friendly material for the development of sustainable separators for rechargeable batteries. This study thus aims to develop high performance paper based ceramic separators with superior electrolyte wettability (>170 %), high thermal stability (>200 °C) and excellent flame safety. While developing paper based ceramic separator, extensive studies are carried out to understand thenature and functionality of different nano-structured ceramic materials (Al2O3, BaTiO3 and ZrO2) impregnated in paper matrix. Nano-ZrO2 facilitates an effective pathway for Li +-ion transport (tLi+ = 0.51), whereas BaTiO3 and Al2O3 ceramics show moderate Li +-ion transport properties (tLi+ of 0.29 and 0.30 respectively). Electrochemical Impedance Spectroscopy (EIS) measurement clearly reveals that ZrO2 exhibits more interfacial compatibility with the electrodes (MCMB and LiNi1/3Mn1/3Co1/3O2) compared to the other two ceramic separators during full cell operation. The developed paper separators show excellent electrochemical properties in terms of cycling (tested 300 cycles), multi-electrode compatibility and rate capabilities at different current densities of 0.1–1.2 mAcm−2. The pre- and post-electrochemical EIS data reveal that ZrO2 based impregnation offers significantly lower charge transfer resistance compared to the other two separators. The study thus demonstrates a real promise for its successful application in Li-ion battery towards achieving sustainability and safety.

Leakage current as a probe into the mechanics of carrier transport in insulating composite polymers

Amorphous composite polymers are widely used as insulators in microelectronics due to their high dielectric strength, mechanical robustness, and thermal stability. However, organic–inorganic composite systems suffer from undesirable performance and accelerated degradation due to leakage current (JTot). Unfortunately, the underlying mechanism of JTot and its components (e.g., ionic and electronic constituents) are inadequately understood, particularly in extreme use conditions (e.g., high humidity and temperature). In this study, we use numerical simulation and experimental JTot data (in amorphous epoxy polymer with silica fillers) to (i) unify the electrostatic model for JTot in composite polymers, (ii) illustrate that the early part of JTot (i.e., external current) is primarily due to the image charge associated with ion transport/ localization (Jion) near the metallic contacts, (iii) demonstrate that the accumulated counter-ions reduce the barrier for electronic charge injection (by band bending) and facilitate electronic injection from the metals (Jelec), and (iv) provide an algorithm for the in situ ion transport characterization of composite insulators by exploiting Jion. This work provides new insights regarding the leakage current mechanism and how it can be used as a probe into the complex transport mechanisms of the composite material.

In vitro platform to model the function of ionocytes in the human airway epithelium

BackgroundPulmonary ionocytes have been identified in the airway epithelium as a small population of ion transporting cells expressing high levels of CFTR (cystic fibrosis transmembrane conductance regulator), the gene mutated in cystic fibrosis. By providing an infinite source of airway epithelial cells (AECs), the use of human induced pluripotent stem cells (hiPSCs) could overcome some challenges of studying ionocytes. However, the production of AEC epithelia containing ionocytes from hiPSCs has proven difficult. Here, we present a platform to produce hiPSC-derived AECs (hiPSC-AECs) including ionocytes and investigate their role in the airway epithelium.MethodshiPSCs were differentiated into lung progenitors, which were expanded as 3D organoids and matured by air-liquid interface culture as polarised hiPSC-AEC epithelia. Using CRISPR/Cas9 technology, we generated a hiPSCs knockout (KO) for FOXI1, a transcription factor that is essential for ionocyte specification. Differences between FOXI1 KO hiPSC-AECs and their wild-type (WT) isogenic controls were investigated by assessing gene and protein expression, epithelial composition, cilia coverage and motility, pH and transepithelial barrier properties.ResultsMature hiPSC-AEC epithelia contained basal cells, secretory cells, ciliated cells with motile cilia, pulmonary neuroendocrine cells (PNECs) and ionocytes. There was no difference between FOXI1 WT and KO hiPSCs in terms of their capacity to differentiate into airway progenitors. However, FOXI1 KO led to mature hiPSC-AEC epithelia without ionocytes with reduced capacity to produce ciliated cells.ConclusionOur results suggest that ionocytes could have role beyond transepithelial ion transport by regulating epithelial properties and homeostasis in the airway epithelium.

Achieving a Double Advantage Through Design of TiO2/C Interlaced Coating for Si Anode

AbstractMultifunctional coating strategy shows promising prospective in advancing Si‐based anodes towards practical applications in Li‐ion batteries. Dual coating of amorphous carbon and TiO2 shows demonstrable advantages owing to high elasticity of amorphous carbon and mechanical toughness of TiO2. However, for past design of Si@C@TiO2 composite electrode, wherein C and TiO2 are configured layer‐by‐layer, a long‐standing problem exists as that a thin TiO2 coating is insufficient to stabilize the electrode's architecture while a thick one prevents the core active material of Si far from fully electrochemically utilization due to the too strong structural constraint effect. Herein, it presents that a facial heat treatment of Si@C@TiO2 with thick enough TiO2 can readily avert the problem. Such a strategy promotes the capacity utilization rate from 39% to 61% for the initial cycle and from 43% to 85% after 200 cycles. Model structure of C/TiO2 multilayer films is employed to reveal the role of the heat treatment. It finds that the heat treatment can transform a layer‐by‐layer structure of C@TiO2 into an interlaced structure of C/TiO2 which exhibits a dual advantage in withstanding mechanical strain and simultaneously promoting Li‐ion storage and electron/Li‐ion transport.

The influence of in-situ induced and MnO2 polymorph-dependent structural changes to the energy storage and mechanism of supercapacitors

Due to its economic, environmental, and theoretical advantages, manganese dioxide (MnO2) is a promising cathode material for supercapacitors. However, the commercial application of MnO2 still faces challenges such as low intrinsic conductivity, slow ion diffusion, and structural instability. In this study, four crystalline forms of MnO2 powder electrodes (α-, β-, γ-, and δ-MnO2) were prepared, and results showed that with a specific capacitance of 218.2 F∙g−1, δ-MnO2 exhibited the best electrochemical performance. This was primarily due to the fact that δ-MnO2 possesses a high specific surface area, rich oxygen vacancy, and fast electron-ion transfer speed. A self-supported electrode (δ-MnO2/NF) without binder addition was further prepared using an in-situ-induced technique. The results revealed that the specific capacitance of δ-MnO2/NF was as high as 809.4 F∙g−1 and that the capacity retention rate and coulombic efficiency after 5000 cycles were 92.8 % and 99.2 %, respectively, which were superior to those of δ-MnO2 (80.3 % and 93.5 %). In-situ induction not only amplifies the structural advantages of δ-MnO2 but also generates more electrochemical active sites due to the intense interaction between NF and δ-MnO2. In addition, ultrathin nanosheet arrays formed on the NF provide a three-dimensional conductive network for the transport of ions and electrons. Density functional theory calculations were performed to verify the excellent electronic conductivity and ion diffusivity of δ-MnO2 and showed that transferring electrons from metal Ni to δ-MnO2 is the basis for producing numerous oxygen vacancies in δ-MnO2/NF.

Silkworm cocoon-inspired and robust nanofibrous composite separator with gradient structure for lithium ion batteries

Considering electrospun nanofiber-based membranes that generally exhibit high porosity but poor mechanical property, there is a growing need to fabricate nanofibrous separators with comprehensive performance for lithium-ion batteries (LIBs). Silkworm cocoon, a source of design inspiration from nature, comprises a multilayer structure with composition change in the thickness direction, thereby endowing the cocoon with relatively high porosity and outstanding mechanical strength. Therefore, a silkworm cocoon-like structured nanofibrous separator (GPS) is fabricated in this work by initially preparing several polyacrylonitrile (PAN) nanofibrous membranes with varied content of carboxyl styrene butadiene latex (SBR) and then laminating them in a concentration gradient sequence. Compared with the pristine PAN membrane, the GPS exhibits comparable porosity, thermal stability and electrolyte wettability due to the existence of PAN nanofibers, while the tensile strength and puncture resistance of the GPS are greatly raised by 5.5 times and 1.5 times, respectively. On account of the structure design, GPS also shows better mechanical strength than PAN/SBR separators without concentration gradient, and the strengthening mechanism has been verified by the finite element analysis. Meanwhile, such gradient structure of GPS renders the battery with desirable ion transport ability and stable cycle properties. Thus, the silkworm cocoon-like structured separator could be a promising separator candidate for LIBs, and the bioinspired design in structure will play an increasingly important role in the development of high-performance battery in the future.

Exhaustive Study of Electrical Conductivity in the MNb2−x TixO6–0.5x (M = Mg, Ca, Zn; x = 0, 0.1, 0.2) Columbites

The CaNb2O6 and ZnNb2O6 columbites (Sp.gr. Pbcn) were studied as oxygen ion conductors both theoretically and experimentally. A theoretical approach included geometrical-topological analysis, bond valence site energy (BVSE) and density functional theory (DFT) calculations. The BVSE approach showed the possibility of pure oxygen ions diffusion with migration energies less than 0.45 eV in both compounds. However, DFT calculations indicated the possibility of diffusion of both anions and cations. The single-phases columbites were synthesized by the Pechini method for accurately determine charge carriers type and investigated by impedance spectroscopy, by the Tubandt method, which confirmed the absence of cationic conductivity, and measured the electrical conductivity as a function of oxygen partial pressures. The CaNb2O6 sample was characterized by the pure oxygen-ionic conductivity ∼2 × 10−6 S cm–1 at 800 °C (E a = 0.82 eV), while the ZnNb2O6 had a similar conductivity value due to mixed ionic-electronic contribution (E a = 0.83 eV). The electromotive force method also showed the predominance of the ionic type of conductivity in CaNb2O6, while ZnNb2O6 has a mixed conductivity with ion transport number of about 0.4. Additionally, we synthesized Ti-doped samples MNb2−x Ti x O6–0.5x (M = Mg, Ca; x = 0.1, 0.2) to study the doping effect on conducting properties.

Molten Guest-Mediated Metal-Organic Frameworks Featuring Multi-Modal Supramolecular Interaction Sites for Flame-Retardant Superionic Conductor in All-Solid-State Batteries.

The development of solid-state electrolytes (SSEs) with outstanding comprehensive performance is currently a critical challenge for achieving high energy density and safer solid-state batteries (SSBs). In this study, a strategy of nano-confined in situ solidification is proposed to create a novel category of molten guest-mediated metal-organic frameworks, named MGM-MOFs. By embedding the newly developed molten crystalline organic electrolyte (ML20) into the nanocages of anionic MOF-OH, MGM-MOF-OH, characterized by multi-modal supramolecular interaction sites and continuous negative electrostatic environments within nano-channels, is achieved. These nanochannels promote ion transport through the successive hopping of Li+ between neighbored negative electrostatic environments and suppress anion movement through the chemical constraint of the hydroxyl-functionalized pore wall. This results in remarkable Li+ conductivity of 7.1 × 10-4 S cm-1 and high Li+ transference number of 0.81. Leveraging these advantages, the SSBs assembled with MGM-MOF-OH exhibit impressive cycle stability and a high specific energy density of 410.5Wh kganode + cathode + electrolyte -1 under constrained conditions and various working temperatures. Unlike flammable traditional MOFs, MGM-MOF-OH demonstrates high robustness under various harsh conditions, including ignition, high voltage, and extended to humidity.

Asymmetric capacitive deionization based on pore structures of biochar

Biochar is an affordable and sustainable material for the application of capacitive deionization. Although the desalination capability of biochar is significantly impacted by its pore size distribution, the correlation between them is challenging to explore due to the uncontrollable pore size. This study exclusively utilizes different activation mechanisms to regulate the pore size distribution of carbon derived from the same biomass precursor, and explores the role of pore structures in capacitive deionization. The specific capacitance of microporous biochar (MiB) can reach up to 319.1 F/g (0.2 A/g), with an Epzc of 0.11 V and high oxygen content, while mesoporous biochar (MeB) has a specific capacitance of only 170.4 F/g, an Epzc of 0 V, and a small charge transfer impedance. The MeB//MiB desalination cell is designed based on these characteristics and demonstrates a higher salt adsorption capacity of 17.04 mg/g at 1.2 V, compared to MiB//MiB (15.72 mg/g) and MeB//MeB (6.07 mg/g), alongside a stability of 81 % after 50 cycles. These capabilities can be attributed to the expanded voltage range resulting from the different Epzc, and the high ion storage capacity of MiB, as well as the fast ion transport capability of MeB. The oxygen/carbon ratio of the anode in MeB//MiB increased by only 42 %, whereas that in MiB//MiB increased by 370 %, confirming the oxidation inhabitation ability of the asymmetric structure and the oxidation resistance of MeB. Therefore, constructing ideal pore structures and more importantly reasonable deployment is an effective strategy for improving desalination capacity and stability.

A multifunctional device for simultaneous hypersaline wastewater desalination, waste acid-base neutralization, and electricity generation

Industrial wastewater treatment is a pressing global challenge that requires sustainable and energy-efficient solutions. Conventional methods for treating industrial wastewater are often energy-intensive and limited to specific types of wastewater. Therefore, there is a need for innovative approaches that can simultaneously treat multiple types of wastewater while minimizing energy consumption. Herein, we report a circular wastewater-economy approach in which a multifunctional device is utilized to simultaneously treat three types of industrial wastewater (i.e., hypersaline wastewater, waste acid, and waste base). Remarkably, the proposed device exhibits a high salt removal performance (e.g., 87.7% for 80856.39 mg L−1 hypersaline wastewater while 98.8% for natural seawater), along with a significant reduction in acidity/alkalinity of waste acid/base and a decent amount of electricity. The experimental results validate the device performance of treating artificially produced and complex wastewater solutions. It also demonstrates a highly stable operation in continuous flow mode over 100 hours, verifying its potential scalability and long-term stability. The comprehensive theoretical and experimental analyses provide deeper insights into the influence of key properties of ions on the ion transport mechanism and performance. Techno-economic analyses show that the proposed device holds great promise for addressing sustainability challenges associated with industrial wastewater treatment.

Iontronic Sensing Based on Confined Ion Transport.

Iontronic Sensing Based on Confined Ion Transport.

Polydopamine supporting method fabricating vanadium nitride nanoparticle enclosed into hierarchical hollow carbon nanospheres for supercapacitors

Nanostructure is crucial for achieving electrode materials with high capacity and high-power ascribing to pleasing specific surface area, intrinsic safety, and satisfactory ion transport pathways; nevertheless, the structural collapse that occurs during high-temperature treatment may lead to a decrease in the specific surface area of the electrode material, causing technical obstacles, and hence affecting its practical applicability. Vanadium nitride has become a promising electrode material since its superior conductivity and desirable theoretical capacity; unfortunately, its practical application is hindered by its limited rate capability, cycle stability, and tendency to dissolve in alkaline solutions. In this study, a template-free method is employed to prepare hollow nanosphere structures through the self-supporting effect of dopamine. When subjected to high-temperatures, it can successfully hinder the collapse of the hollow nanostructures. Graded vanadium nitride nanoparticles are generated in this process and encapsulated in hollow nanostructures. The issues of vanadium nitride dissolution and low transport rate in alkaline electrolytes can be efficiently resolved by leveraging the self-supporting action of dopamine and the subsequent formation of hierarchical vanadium nitride nanoparticles. The anode material endows a capacity of 387.14 F g−1 at a current density of 0.5 A g−1, as well as a coulombic efficiency of 98.28 % even after 10, 000 cycles at a current density of 3 A g−1. Additionally，the assembled device can achieve a maximum power density of 4, 000 W kg−1 and an energy density of 22.89 Wh Kg−1. This anode material displays potential applications in energy storage devices and offers a novel approach to material preparation.

Analysis and optimization of lead-free perovskite solar cells: investigating performance and electrical characteristics

AbstractSeveral studies on solar cells using SCAPS-1D were conducted to investigate their performance, which are typically limited to I–V analysis for DC characterization. Therefore, in the present study, a very wide frequency range from 10–2 Hz to 1012 Hz was employed to explore diffusion processes and investigate the performance of lead-free Perovskite Solar Cells (PSCs) featuring as a novel heterostructure. These investigations concern the optimization of MASnI3 thickness as an absorber. Additionally, the impact of series (Rs) and shunt (Rsh) resistances is also examined. From the I–V analysis, it was determined that the power efficiency (PCE) could be achieved at a thickness of 0.6 µm. Increasing the series resistance (Rs) led to a significant decrease in the fill factor (FF) and (PCE), whereas the shunt resistance (Rsh) demonstrated a notable improvement in both (FF) and (PCE). Analysis of AC characteristics revealed complex impedance (Z*) and modulus (M*) indicative of main ionic transport, recombination, and diffusion processes crucial for optimization. An appropriate equivalent circuit model was developed and validated through deconvolution and theoretical considerations, yielding parameters such as the time constant for each process. It was observed that ionic conductivity and electronic diffusion play key roles in balancing charge collection and recombination losses. The critical influence of series and shunt resistance on low and high-frequency processes was emphasized, underscoring their significance in solar cell efficiency. A strong correlation was established between the evolution of time constants for each process and power conversion efficiency (PCE).

Exploiting protein language models for the precise classification of ion channels and ion transporters.

This study introduces TooT-PLM-ionCT, a comprehensive framework that consolidates three distinct systems, each meticulously tailored for one of the following tasks: distinguishing ion channels (ICs) from membrane proteins (MPs), segregating ion transporters (ITs) from MPs, and differentiating ICs from ITs. Drawing upon the strengths of six Protein Language Models (PLMs)-ProtBERT, ProtBERT-BFD, ESM-1b, ESM-2 (650M parameters), and ESM-2 (15B parameters), TooT-PLM-ionCT employs a combination of traditional classifiers and deep learning models for nuanced protein classification. Originally validated on an existing dataset by previous researchers, our systems demonstrated superior performance in identifying ITs from MPs and distinguishing ICs from ITs, with the IC-MP discrimination achieving state-of-the-art results. In light of recommendations for additional validation, we introduced a new dataset, significantly enhancing the robustness and generalization of our models across bioinformatics challenges. This new evaluation underscored the effectiveness of TooT-PLM-ionCT in adapting to novel data while maintaining high classification accuracy. Furthermore, this study explores critical factors affecting classification accuracy, such as dataset balancing, the impact of using frozen versus fine-tuned PLM representations, and the variance between half and full precision in floating-point computations. To facilitate broader application and accessibility, a web server (https://tootsuite.encs.concordia.ca/service/TooT-PLM-ionCT) has been developed, allowing users to evaluate unknown protein sequences through our specialized systems for IC-MP, IT-MP, and IC-IT classification tasks.

Study on the Ionic Transport Properties of 3D Printed Concrete

Three-dimensional printed concrete (3DPC) is an anisotropic heterogeneous material composed of a concrete matrix and the interfaces between layers and filaments that form during printing. The overall ion transport properties can be characterized by the equivalent diffusion coefficient. This paper first establishes a theoretical model to calculate the equivalent diffusion coefficient of 3DPC. Verification through numerical calculations shows that this theoretical model is highly precise. Based on this, the model was used to analyze the effects of dimensionless interface parameters on the equivalent diffusion coefficients in different directions of 3DPC. Finally, the dynamic ionic transport properties of 3DPC were investigated through finite element numerical simulation. The results of the dynamic study indicate that interfaces have a significant impact on the ion distribution and its evolution within 3DPC. The product of the interface diffusion coefficient and interface size can represent the ionic transport capacity of an interface. The stronger the ionic transport capacity of an interface, the higher the ion concentration at that interface. Due to the “drainage” effect of lateral interfaces, the ion concentration in the middle of 3DPC with a smaller equivalent diffusion coefficient is higher than that in 3DPC with a larger equivalent diffusion coefficient.

Impact of Confinement and Zwitterionic Ligand Chemistry on Ion-Ion Selectivity of Functionalized Nanopores.

Membranes incorporating zwitterionic chemistries have recently emerged as promising candidates for facilitating challenging ion-ion separations. Transport of ions in such membranes predominantly occurs in hydrated nanopores lined with zwitterionic monomers. To shed light on the physics of ion-ion selectivity underlying such materials, we conducted molecular dynamics simulations of sodium halide transport in model nanopores grafted with sulfobetaine methacrylate molecules. Our results reveal that in both functionalized and unfunctionalized nanopores smaller ions prefer to reside near the pore center, while the larger ions tend to reside near the pore walls. An enhancement in the selective transport of larger anions is observed within the unfunctionalized nanopores relative to that in salt-in-water solutions. Upon functionalization of the nanopores with zwitterions (ZIs), the disparities in the anionic distribution profiles within the pores coupled with differences in the anion-ZI interactions result in a slowdown of larger anions relative to smaller anions. Increasing the ZI grafting density exacerbates these effects, further promoting the selective transport of smaller anions. Our results suggest that selectivity toward large anions can be realized by using nanoporous membranes with ZI content that is high enough to facilitate ion/water partitioning into the pores while preserving the characteristic tendency of the unfunctionalized pores to facilitate faster transport of the larger anions. On the other hand, selectivity toward smaller anions can be achieved by targeting ZI content within the pores that is high enough to significantly slow down the transport of large anions but not high enough to hinder the partitioning of ions/water molecules into the pore due to steric effects.

A Microporous Gel Polymer Electrolyte with High Mg2+ Ionic Conductivity at Room Temperature

Rechargeable magnesium batteries have attracted much attention due to the high theoretical volumetric capacity, abundance, and safety. However, solid‐state Mg batteries have been rarely studied because of limited choices of solid‐state electrolyte materials. In this research, poly(vinylidene fluoride)/poly(propylene carbonate) (PVDF/PPC) as matrix were prepared using a simple solution casting method. Ethylene carbonate (EC), diethyl carbonate (DEC), and magnesium(II) bis(trifluoromethanesulfonyl) imide [Mg(TFSI)2] were selected to prepare liquid electrolyte. A classification of novel gel polymer electrolytes (GPEs), PVDF/PPC/Mg(TFSI)2, was synthesized and investigated. The electrochemical measurements show that PVDF/PPC/Mg(TFSI)2 polymer electrolytes exhibit a high ionic conductivity, close to 10‐2 S cm‐1, at room temperature. The electrochemical stability window of PVDF/PPC‐based GPE was up to 3 V (versus Mg2+/Mg). Materials characterization shows that these GPEs have a porous structure, providing a pathway for magnesium ion transport. Thermal analysis and crystal structure results indicate that PVDF crystallinity was affected by the addition of PPC. Additionally, the ion transport mechanism in the gel polymer electrolyte has been discussed.

P155 Gene expression in hypermobility and the role of inflammation

Abstract Background/Aims Hypermobile conditions, including Ehlers-Danlos syndrome and joint hypermobility syndrome, encompass a broad spectrum of heterogenous clinical entities characterised by excessive range of joint movements and variable extra-articular features. The etiological basis of these conditions is thought to relate to abnormal collagen assembly, which impairs the structural integrity of connective tissue, although precise mechanisms remain both debated and incompletely understood. Despite the established strong heritability of hypermobility, a definitive genetic cause remains unidentifiable in most hypermobile patients, highlighting the need to further characterize the genetic landscape of hypermobile conditions. In this study, we therefore employ transcriptomic analysis as an alternate means of elucidating the genetic basis of hypermobility. Methods We tested for the effects of hypermobility on gene expression, at baseline and following an inflammatory challenge, by re-analysing existing transcriptomic data gathered from healthy subjects and patients with fibromyalgia and chronic fatigue using total RNA sequencing of blood samples (Illumina NextSeq 500). From each participant, two blood samples were taken on separate occasions: one after a saline injection and the other after an inflammatory challenge, the typhoid vaccination, in a cross-over design. Participants were assigned to hypermobile or non-hypermobile conditions in accordance with criterion 1: generalized joint hypermobility of the Diagnostic Criteria for Hypermobile Ehlers-Danlos Syndrome (hEDS) produced by the International Consortium on Ehlers-Danlos Syndromes & Related disorders. Differential gene expression analysis comparing hypermobile and non-hypermobile participants was performed using EdgeR software in R studio. Baseline differences were determined by comparing post-saline samples between groups. Differential responses to the inflammatory challenge were detected by comparison of post-typhoid samples between groups. Gene ontology on differentially expressed genes was performed using DAVID’s Functional Annotation Clustering tool. Results We found 288 differentially expressed genes post-saline (i.e at baseline) and 1113 post-typhoid at p < 0.05 although none passed false discovery rate. At baseline, differentially expressed genes were significantly enriched for nuclear, endoplasmic reticulum, and microtubular genes (enrichment score = 2.96, 2.02, 1.3 respectively); and post-typhoid, for 24 clusters, the three most significant being synaptic, ion transport, and plasma membrane genes (enrichment score = 11.34, 8.71, and 7.3 respectively). Conclusion These data demonstrate distinct patterns of gene expression, both at baseline and during inflammation, which implicate potential biological pathways in the pathophysiology of hypermobility. These results also contribute to a growing understanding of the genetic basis of hypermobility and may inform future higher-powered studies to validate our findings. Disclosure J. Porter: None. M. Amato: None. K. Themelis: None. H. Critchley: None. S. Newbury: None. K. Davies: None. N. Harrison: None. B. Towler: None. J. Eccles: Grants/research support; J.E. has received funding from Versus Arthritis, National Institute for Health Research and the Fibroduck Foundation.