Growth Inhibition Of Bacteria Research Articles

Electrically conductive and antimicrobial Pluronic-based hydrogels

Electrically conductive hydrogels (ECHs) combine the electrical properties of conductive materials with the unique features of hydrogels. They are attractive for various biomedical applications due to their smart response to electrical fields. Owing to their distinctive properties, such as biocompatibility, thermosensitivity and self-assembling behaviour, Pluronics can be adopted for the generation of hydrogels for biomedical applications. Here, innovative self-assembling ECHs holding antimicrobial properties for biomedical applications are developed, providing a full characterization of their macroscopic and microscopic properties. The rheological, morphological, and structural properties of Pluronic F68 (PF68) in the presence of conductive poly(3,4-ethylenedioxythiophene):poly-(styrenesulfonate) (PEDOT:PSS) are studied to optimize the synthesis of novel biocompatible and electrically conductive hydrogels. The addition of silver (Ag) flakes to the aqueous samples of PF68/PEDOT:PSS is used to further enhance the systems electrical conductivity and antimicrobial potency. Aqueous optimal samples with 45 wt% PF68 and different PEDOT:PSS/silver contents are investigated by means of experimental rheology and small-angle X-ray scattering (SAXS), to unveil the influence of both PEDOT:PSS and silver on the phase diagram, macroscopic flow properties, and morphology of the Pluronic-based systems.The presence of PEDOT:PSS and silver flakes endows Pluronic systems with high conductive properties, while preserving the same self-assembly features of PF68 in water. Moreover, the functionalisation with silver flakes confers antimicrobial properties to the ECHs, as demonstrated by growth inhibition of the multi-drug resistant bacterium Staphylococcus aureus.The use of PF68 in this work provides a novel route for the synthesis of innovative ECHs, whose functionalities such as self-assembling behaviour, biocompatibility, conductivity, and bioactivity may inspire future avenues for biomedical field.

Synergistic effects of oxidative and acid stress on bacterial membranes of Escherichia coli and Staphylococcus simulans

Oxidative stress in combination with acid stress has been shown to inactivate a wide spectrum of microorganisms, including multi-resistant bacteria. This occurs e.g. in phagolysosomes or during treatment by cold atmospheric pressure plasmas (CAP) and possibly depends on the cell membrane. We therefore explored the effects of CAP-generated reactive oxygen and nitrogen species (RONS) on bacterial growth inhibition and membranes in neutral and acidic suspensions. We observed that growth inhibition was most efficient when bacteria were treated by a mix of short and long-lived RONS in an acidic environment. Membrane packing was affected mainly upon contact with short-lived RONS, while also acidity strongly modulated packing. Under these conditions, Gram-negative bacteria displayed large potassium release while SYTOX Green influx remained marginal. Growth inhibition of Gram-negative bacteria correlated well with outer membrane (OM) permeabilization that occurred upon contact with short and/or long-lived RONS in synergy with acidity. In Gram-positive bacteria, CAP impaired membrane potential possibly through pore formation upon contact with short-lived RONS while formation of membrane protein hydroperoxides was probably involved in these effects. In summary, our study provides a wide perspective on understanding inactivation mechanisms of bacteria by RONS in combination with acidity.

The Pseudomonas aeruginosa sphBC genes are important for growth in the presence of sphingosine by promoting sphingosine metabolism.

Sphingoid bases, including sphingosine, are important components of the antimicrobial barrier at epithelial surfaces where they can cause growth inhibition and killing of susceptible bacteria. Pseudomonas aeruginosa is a common opportunistic pathogen that is less susceptible to sphingosine than many Gram-negative bacteria. Here, we determined that deletion of the sphBCD operon reduced growth in the presence of sphingosine. Using deletion mutants, complementation, and growth assays in P. aeruginosa PAO1, we determined that the sphC and sphB genes, encoding a periplasmic oxidase and periplasmic cytochrome c, respectively, were important for growth on sphingosine, while sphD was dispensable under these conditions. Deletion of sphBCD in P. aeruginosa PA14, P. protegens Pf-5, and P. fluorescens Pf01 also showed reduced growth in the presence of sphingosine. The P. aeruginosa sphBC genes were also important for growth in the presence of two other sphingoid bases, phytosphingosine and sphinganine. In wild-type P. aeruginosa, sphingosine is metabolized to an unknown non-inhibitory product, as sphingosine concentrations drop in the culture. However, in the absence of sphBC, sphingosine accumulates, pointing to SphC and SphB as having a role in sphingosine metabolism. Finally, metabolism of sphingosine by wild-type P. aeruginosa protected susceptible cells from full growth inhibition by sphingosine, pointing to a role for sphingosine metabolism as a public good. This work shows that metabolism of sphingosine by P. aeruginosa presents a novel pathway by which bacteria can alter host-derived sphingolipids, but it remains an open question whether SphB and SphC act directly on sphingosine.

Antiviral effect of the viroporin inhibitors against Taiwan isolates of infectious bronchitis virus (IBV)

Coronaviruses (CoVs) are significant animal and human pathogens, characterized by being enveloped RNA viruses with positive-sense single-stranded RNA. The Coronaviridae family encompasses four genera, among which gammacoronaviruses pose a major threat to the poultry industry, which infectious bronchitis virus (IBV) being the most prominent of these threats. Particularly, IBV adversely affects broiler growth and egg production, causing substantial losses. The IBV strains currently circulating in Taiwan include the IBV Taiwan-I (TW-I) serotype, IBV Taiwan-II (TW-II) serotype, and vaccine strains. Therefore, ongoing efforts have focused on developing novel vaccines and discovering antiviral agents. The envelope (E) proteins of CoVs accumulate in the endoplasmic reticulum-Golgi intermediate compartment prior to virus budding. These E proteins assemble into viroporins, exhibiting ion channel activity that leads to cell membrane disruption, making them attractive targets for antiviral therapy.In this study, we investigated the E proteins of IBV H-120, as well as IBV serotypes TW-I and TW-II. E protein expression resulted in inhibited bacteria growth, increased permeability of bacteria to β-galactosidase substrates, and blocked protein synthesis of bacteria by hygromycin B (HygB). Furthermore, in the presence of E proteins, HygB also impeded protein translation in DF-1 cells and damaged their membrane integrity. Collectively, these findings confirm the viroporin activity of the E proteins from IBV H-120, IBV serotype TW-I, and IBV serotype TW-II. Next, the viroporin inhibitors, 5-(N,N-hexamethylene) amiloride (HMA) and 4,4’-diisothiocyano stilbene-2,2’-disulphonic acid (DIDS) were used to inhibit the viroporin activities of the E proteins of IBV H-120, IBV serotype TW-I, and IBV serotype TW-II. In chicken embryos and chickens infected with IBV serotypes TW-I and IBV TW-II, no survivors were observed at 6 and 11 days post-infection (dpi), respectively. However, treatments with both DIDS and HMA increased the survival rates in infected chicken embryos and chickens and mitigated histopathological lesions in the trachea and kidney. Additionally, a 3D pentameric structure of the IBV E protein was constructed via homology modeling. As expected, both inhibitors were found to bind to the lipid-facing surface within the transmembrane domain of the E protein, inhibiting ion conduction. Taken together, our findings provide comprehensive evidence supporting the use of viroporin inhibitors as promising antiviral agents against IBV Taiwan isolates.

Theranostic nano-enabled polyurethane eso-sponges coupled to surface enhanced Raman scattering for detection and control of bacteria killing

Herein, a facile approach toward converting a three-dimensional polyurethane sponge (PUS), employed in endoluminal vacuum-assisted closure (endo-VAC) therapies, in a theranostic material able to detect and to inhibit bacteria growth, has been reported. The endo-VAC PUS presented sensitivity to Gram-positive and Gram-negative bacterial species thanks to its functionalization with gold and silver antibacterial nanoparticles (NPs). PUS with chitosan-stabilized Au-NPs achieved 5.26 ± 0.17 logs and 2.78 ± 0.34 logs of reduction of bacteria growth, whereas the sponges functionalized with phenolated lignin Ag-NPs offered slightly inferior values (4.77 ± 0.36 logs and 2.03 ± 0.37 logs, respectively), against Escherichia coli and Staphylococcus aureus pathogens, respectively, after the application of photothermal ablation. The in vitro antimicrobial studies were contrasted with the in-situ monitoring of bacteria localization and inactivation with excitation lasers of 532 and 785 nm wavelengths, respectively, in the Raman equipment. The novel theranostic nano-enabled antimicrobial PU sponges offer unprecedented possibilities for the improvement of the endo-VAC treatments and extrapolation of the methodology to other plastic-based implants to combat antimicrobial resistances.

Silk-fibroin-based nanofibrous scaffolds integrated with nano-engineered living bacteria enabling antibiotic-free accelerated infected wound healing

Bacteria‐infected skin wounds are an immense public health challenge for high mortality-rate and enormous financial burden worldwide. Emerging living bacterial therapy promises the desired therapeutic efficacy for wound healing, however, its indiscriminate negative effects on the bioactivity of beneficial bacteria remain enormous challenges for clinical far-ranging applications. Herein, silk fibroin-based nanofibrous scaffolds equipped with nano-engineered tannic acid (TA)-Fe(III) chelate-encapsulated Lactobacillus reuteri (denoted as Mbr/L@FeTA) were proposed for antibiotic-free accelerated bacteria‐infected wound healing. Mbr/L@FeTA exhibited excellent antimicrobial properties (99.03% and 98.60% bactericidal efficiency against Escherichia coli and Staphylococcus aureus, respectively), gratifying mechanical properties and biocompatibility. Furthermore, due to on-demand TA-Fe(III) chelate-encapsulated bacterial tactics, Mbr/L@FeTA demonstrates exceptional environmental resistance and maintains satisfactory biological-activity even when administered with antibiotics. Additionally, Mbr/L@FeTA enables the stable release of organic acids and other metabolites that significantly improve the wound microenvironment and modulate inflammatory reactions. In vivo and in vitro experiments confirmed that Mbr/L@FeTA strongly promoted cell growth and proliferation, inhibited bacteria growth at the wound-site, and further accelerated the healing process in bacteria-infected wounds. These findings suggest that Mbr/L@FeTA exhibits great potential for applications in antibiotic-free infected wound therapy and simultaneously represents a useful approach for clinical applications of living bacterial therapy.

Bacterial growth inhibition in spring water utilizing silver nanoparticles: Optimization using central composite design

Ensuring safe drinking water remains a significant challenge due to the prevalence of waterborne diseases. While chlorine-based and UV-based methods effectively kill pathogens, they often generate harmful byproducts. Consequently, there's a pressing need for innovative techniques, such as utilizing silver nanoparticles(AgNPs) renowned for their antibacterial properties. In this study, a chemical reduction technique was employed to synthesize AgNPs. Subsequently, these AgNPs underwent comprehensive characterization using techniques such as FTIR, XRD,TGA and XPS. The synthesized nanoparticles were then applied for disinfecting spring water. The experimental design was meticulously planned using the central composite design method (CCD) from Response Surface Methodology (RSM), facilitated by Design Expert software. Three key factors: AgNPs, pH, and contact time were varied across three levels, resulting in a total of 20 designed experiments. These experiments were conducted in accordance with the specified run order, culminating in the achievement of maximum bacteria growth inhibition efficiency of 99.72 % at the optimal conditions of 0.01 mg/100 mL AgNPs dose, a pH of 6, and a contact time of 20 min. Overall, the findings of this study underscore the efficiency of AgNPs in disinfecting spring water.

Multiple strategy for antibacterial effect via copper porphyrin doping polyphenolic aldehydes based covalent organic framework

Microbial infections continue to be one of the cosmopolitan safety hazards to humankind. To achieve effective sterilization, it is urgent to develop non-antibiotic strategies or integrating multiple antimicrobial methods. Organic photo-antimicrobials (OPAMs) has attracted attention in fighting against bacteria by reactive oxygen species (ROS) or heat without triggering drug resistance. In our work, a copper-porphyrin doping donor-acceptor (D-A) type covalent organic framework (COF), named CTF-BTA2OH-Por(Cu), is constructed to achieve synergistic antibacterial effects by ROS generation and protein degradation. Copper-porphyrin doping improves ROS generation of D-A COF, showing great photocatalytic antibacterial activity (>90 % within 1 h). Additionally, the polyphenolic aldehydes of BTA2OH can interact with protein strongly and cause degradation, resulting inhibition of bacteria growth without light. Thus, CTF-BTA2OH-Por(Cu) showed antibacterial activity under both light and dark conditions. These findings give inspiration for COF multifunctional design for antimicrobials strategy and its application in supplies anti-infection or preservation.

Hyaluron-Based Bionanocomposites of Silver Nanoparticles with Graphene Oxide as Effective Growth Inhibitors of Wound-Derived Bacteria.

Keeping wounds clean in small animals is a big challenge, which is why they often become infected, creating a risk of transmission to animal owners. Therefore, it is crucial to search for new biocompatible materials that have the potential to be used in smart wound dressings with both wound healing and bacteriostatic properties to prevent infection. In our previous work, we obtained innovative hyaluronate matrix-based bionanocomposites containing nanosilver and nanosilver/graphene oxide (Hyal/Ag and Hyal/Ag/GO). This study aimed to thoroughly examine the bacteriostatic properties of foils containing the previously developed bionanocomposites. The bacteriostatic activity was assessed in vitro on 88 Gram-positive (n = 51) and Gram-negative (n = 37) bacteria isolated from wounds of small animals and whose antimicrobial resistance patterns and resistance mechanisms were examined in an earlier study. Here, 69.32% of bacterial growth was inhibited by Hyal/Ag and 81.82% by Hyal/Ag/GO. The bionanocomposites appeared more effective against Gram-negative bacteria (growth inhibition of 75.68% and 89.19% by Hyal/Ag and Hyal/Ag/Go, respectively). The effectiveness of Hyal/Ag/GO against Gram-positive bacteria was also high (inhibition of 80.39% of strains), while Hyal/Ag inhibited the growth of 64.71% of Gram-positive bacteria. The effectiveness of Hyal/Ag and Hyal/Ag/Go varied depending on bacterial genus and species. Proteus (Gram-negative) and Enterococcus (Gram-positive) appeared to be the least susceptible to the bionanocomposites. Hyal/Ag most effectively inhibited the growth of non-pathogenic Gram-positive Sporosarcina luteola and Gram-negative Acinetobacter. Hyal/Ag/GO was most effective against Gram-positive Streptococcus and Gram-negative Moraxella osloensis. The Hyal/Ag/GO bionanocomposites proved to be very promising new antibacterial, biocompatible materials that could be used in the production of bioactive wound dressings.

Potential therapeutic agents of Bombyx mori silk cocoon extracts from agricultural product for inhibition of skin pathogenic bacteria and free radicals.

Pathogenic bacteria are the cause of most skin diseases, but issues such as resistance and environmental degradation drive the need to research alternative treatments. It is reported that silk cocoon extract possesses antioxidant properties. During silk processing, the degumming of silk cocoons creates a byproduct that contains natural active substances. These substances were found to have inhibitory effects on bacterial growth, DNA synthesis, the pathogenesis of hemolysis, and biofilm formation. Thus, silk cocoon extracts can be used in therapeutic applications for the prevention and treatment of skin pathogenic bacterial infections. The extract of silk cocoons with pupae (SCP) and silk cocoons without pupae (SCWP) were obtained by boiling with distilled water for 9 h and 12 h, and were compared to silkworm pupae (SP) extract that was boiled for 1 h. The active compounds in the extracts, including gallic acid and quercetin, were determined using high-performance liquid chromatography (HPLC). Furthermore, the total phenolic and flavonoid content in the extracts were investigated using the Folin-Ciocalteu method and the aluminum chloride colorimetric method, respectively. To assess antioxidant activity, the extracts were evaluated using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay. Additionally, the minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) of silk extracts and phytochemical compounds were determined against skin pathogenic bacteria. This study assessed the effects of the extracts and phytochemical compounds on growth inhibition, biofilm formation, hemolysis protection, and DNA synthesis of bacteria. The HPLC characterization of the silk extracts showed gallic acid levels to be the highest, especially in SCP (8.638-31.605 mg/g extract) and SP (64.530 mg/g extract); whereas quercetin compound was only detected in SCWP (0.021-0.031 mg/g extract). The total phenolics and flavonoids in silk extracts exhibited antioxidant and antimicrobial activity. Additionally, SCP at 9 h and 12 h revealed the highest anti-bacterial activity, with the lowest MIC and MBC of 50-100 mg/mL against skin pathogenic bacteria including Staphylococcus aureus, methicillin-resistant S. aureus (MRSA), Cutibacterium acnes and Pseudomonas aeruginosa. Hence, SCP extract and non-sericin compounds containing gallic acid and quercetin exhibited the strongest inhibition of both growth and DNA synthesis on skin pathogenic bacteria. The suppression of bacterial pathogenesis, including preformed and matured biofilms, and hemolysis activity, were also revealed in SCP extract and non-sericin compounds. The results show that the byproduct of silk processing can serve as an alternative source of natural phenolic and flavonoid antioxidants that can be used in therapeutic applications for the prevention and treatment of pathogenic bacterial skin infections.

Melt electrowritten poly-lactic acid /nanodiamond scaffolds towards wound-healing patches

Multifunctional wound dressings, enriched with biologically active agents for preventing or treating infections and promoting wound healing, along with cell delivery capability, are highly needed. To address this issue, composite scaffolds with potential in wound dressing applications were fabricated in this study. The poly-lactic acid/nanodiamonds (PLA/ND) scaffolds were first printed using melt electrowriting (MEW) and then coated with quaternized β-chitin (QβC). The NDs were well-dispersed in the printed filaments and worked as fillers and bioactive additions to PLA material. Additionally, they improved coating effectiveness due to the interaction between their negative charges (from NDs) and positive charges (from QβC). NDs not only increased the thermal stability of PLA but also benefitted cellular behavior and inhibited the growth of bacteria. Scaffolds coated with QβC increased the effect of bacteria growth inhibition and facilitated the proliferation of human dermal fibroblasts. Additionally, we have observed rapid extracellular matrix (ECM) remodeling on QβC-coated PLA/NDs scaffolds. The scaffolds provided support for cell adhesion and could serve as a valuable tool for delivering cells to chronic wound sites. The proposed PLA/ND scaffold coated with QβC holds great potential for achieving fast healing in various types of wounds.

Antioxidant and antimicrobial potentials of biosynthesized Ag-Doped Ni-MOF as a novel hybrid nanocomposite

Metal-organic frameworks (MOFs) are organic–inorganic crystalline compounds that have attracted much attention due to their wide range of applications. Bimetallic MOFs offer more possibilities than MOFs based on single metal. This study focuses on the synthesis and characterization of a Ni-MOF doped with silver nanoparticles (Ag NPs) as potent antioxidant and antimicrobial agent. Red cabbage extract was used as a reducing agent to synthesize Ag NPs. Ag@Ni-MOF nanocomposite exhibited significant growth inhibition of bacteria and fungi, and demonstrated the best antioxidant properties among the synthesized compounds. These results suggest that designed Ag@Ni-MOF nanostructure can be applied in the treatment of oxidative stress-related diseases as well as bacterial/fungal infections.

Bioactive and biodegradable cotton fabrics produced via synergic effect of plant extracts and essential oils in chitosan coating system

Functional antibacterial textile materials are in great demand in the medical sector. In this paper, we propose a facile, eco-friendly approach to the design of antibacterial biodegradable cotton fabrics. Cotton fiber fabrics were enhanced with a chitosan coating loaded with plant extracts and essential oils. We employed Fourier-transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS), UV–Vis spectrophotometry, optical microscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA) to characterize the color, structure, and thermal properties of the modified fabrics. The fabrics were found to effectively induce growth inhibition of Gram-positive and Gram-negative bacteria, especially when a synergic system of aloe vera extract and cinnamon essential oil was applied in the coating formulation. Additionally, we observed significant color and weight changes after 5, 10, and 20 days in soil biodegradability tests. Given the straightforward modification process and the use of non-toxic natural materials, these innovative bio-based and biodegradable cotton fabrics show great promise as protective antimicrobial textiles for healthcare applications.

Enzyme-Linked Lipid Nanocarriers for Coping Pseudomonal Pulmonary Infection. Would Nanocarriers Complement Biofilm Disruption or Pave Its Road?

Cystic fibrosis (CF) is associated with pulmonary Pseudomonas aeruginosa infections persistent to antibiotics. To eradicate pseudomonal biofilms, solid lipid nanoparticles (SLNs) loaded with quorum-sensing-inhibitor (QSI, disrupting bacterial crosstalk), coated with chitosan (CS, improving internalization) and immobilized with alginate lyase (AL, destroying alginate biofilms) were developed. SLNs (140-205 nm) showed prolonged release of QSI with no sign of acute toxicity to A549 and Calu-3 cells. The CS coating improved uptake, whereas immobilized-AL ensured >1.5-fold higher uptake and doubled SLN diffusion across the artificial biofilm sputum model. Respirable microparticles comprising SLNs in carbohydrate matrix elicited aerodynamic diameters MMAD (3.54, 2.48 µm) and fine-particle-fraction FPF (65, 48%) for anionic and cationic SLNs, respectively. The antimicrobial and/or antibiofilm activity of SLNs was explored in Pseudomonas aeruginosa reference mucoid/nonmucoid strains as well as clinical isolates. The full growth inhibition of planktonic bacteria was dependent on SLN type, concentration, growth medium, and strain. OD measurements and live/dead staining proved that anionic SLNs efficiently ceased biofilm formation and eradicated established biofilms, whereas cationic SLNs unexpectedly promoted biofilm progression. AL immobilization increased biofilm vulnerability; instead, CS coating increased biofilm formation confirmed by 3D-time lapse confocal imaging. Incubation of SLNs with mature biofilms of P. aeruginosa isolates increased biofilm density by an average of 1.5-fold. CLSM further confirmed the binding and uptake of the labeled SLNs in P. aeruginosa biofilms. Considerable uptake of CS-coated SLNs in non-mucoid strains could be observed presumably due to interaction of chitosan with LPS glycolipids in the outer cell membrane of P. aeruginosa. The biofilm-destructive potential of QSI/SLNs/AL inhalation is promising for site-specific biofilm-targeted interventional CF therapy. Nevertheless, the intrinsic/extrinsic fundamentals of nanocarrier-biofilm interactions require further investigation.

Characterization of Antibiotic-Resistance Antarctic Pseudomonas That Produce Bacteriocin-like Compounds.

In this study, bacterial isolates C1-4-7, D2-4-6, and M1-4-11 from Antarctic soil were phenotypically and genotypically characterized, and their antibacterial spectrum and that of cell-free culture supernatant were investigated. Finally, the effect of temperature and culture medium on the production of antimicrobial compounds was investigated. The three bacteria were identified as different strains of the genus Pseudomonas. The three bacteria were multi-drug resistant to antibiotics. They exhibited different patterns of growth inhibition of pathogenic bacteria. M1-4-11 was remarkable for inhibiting the entire set of pathogenic bacteria tested. All three bacteria demonstrated optimal production of antimicrobial compounds at 15 °C and 18 °C. Among the culture media studied, Nutrient broth would be the most suitable to promote the production of antimicrobial compounds. The thermostability exhibited by the antimicrobial molecules secreted, their size of less than 10 kDa, and their protein nature would indicate that these molecules are bacteriocin-like compounds.

Potential of 10% propolis-based toothpaste on the inhibition of biofilm-forming bacteria growth in vitro

Aim of the study: To investigate the potential of 10% propolis-based toothpaste on inhibiting biofilm-forming bacteria growth in vitro. Material and method: Organoleptic properties are evaluated, considering color, odor, and taste. Antibacterial tests use a disc diffusion method against Streptococcus mutans, Staphylococcus aureus and Porphyromonas gingivalis bacteria, while cytotoxicity is assessed using the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) assay on fibroblast cells. Statistical analysis involves mean ± standard deviation. The data were then tested using a one-way analysis of variance and Kruskal-Wallis, followed by post-hoc test (p < 0.05). Results: The organoleptic evaluation of 10% propolis toothpaste reveals a visually clear appearance, consistent orange flavor, and aroma lasting 30 days. Based on the antibacterial results, a 10% level of propolis toothpaste sample inhibited the growth of Streptococcus mutans, Staphylococcus aureus and Porphyromonas gingivalis bacteria. The post-hoc test showed that toothpaste demonstrated significant inhibition on S. mutans and S. aureus compared to the negative control (p < 0.05). The toothpaste showed a larger inhibitory zone towards P. gingivalis compared to the adverse control; however, no significant differences were observed (p > 0.05). Cytotoxicity assessment on fibroblast cells shows a high percentage (85.31%) of viable cells. The findings highlight the 10% of propolis toothpaste’s potential and non-toxic as oral care product. Conclusions: 10% propolis toothpaste inhibits S. mutans, S. aureus, P. gingivalis growth, and not toxic on fibroblast.

How data on transformation products can support the redesign of sulfonamides towards better biodegradability in the environment

Sulfonamide antibiotics (SUAs) released into the environment can affect environmental und human health, e.g., by accelerating the development and selection of antimicrobial resistant bacteria. Benign by Design (BbD) of SUAs is an effective risk prevention approach. BbD principles aim for fast and complete mineralization or at least deactivation of the SUA after release into the aquatic environment. Main objective was to test if mixtures of transformation products (TPs) generated via photolysis of SUAs can be used as an efficient way to screen for similarly effective but better biodegradable SUA alternatives.Six SUAs were photolyzed (Hg ultraviolet (UV) light), and generated UV-mixtures analysed by high performance liquid chromatography coupled to an UV and tandem mass spectrometry detector. UV-mixtures were screened for antibiotic activity (luminescence bacteria test, LBT, on luminescence and growth inhibition of Aliivibrio Fischeri) and environmental biodegradability (manometric respirometry test, MRT, OECD 301F) using untreated parent SUAs in comparison. Additionally, ready environmental biodegradability of three commercially available hydroxylated sulfanilamide derivatives was investigated.SUA-TPs contributed to acute and chronic bacterial luminescence inhibition by UV-mixtures. LBT's third endpoint, growth inhibition, was not significant for UV-mixtures. However, it cannot be excluded for tested TPs as concentrations were lower than parents' concentrations and inhibition by most parental concentrations tested was also not significant. HPLC analysis of MRT samples revealed that one third of SUA-TPs was reduced during incubation. Three of these TPs, likely OH-SIX, OH-SMX and OH-STZ, were of interest for BbD because the sulfonamide moiety is still present. However, hydroxylated sulfanilamide derivatives, tested to investigate the effect of hydroxylation on biodegradability, were not readily biodegraded. Thus, improving mineralization through hydroxylation as a general rule couldn't be confirmed, and no BbD candidate could be identified. This study fills data gaps on bioactivity and environmental biodegradability of SUAs' TP-mixtures. Findings may support new redesign approaches.

Tribological and Antimicrobial Properties of Two-Component Self-Assembled Monolayers Deposited on Ti-Incorporated Carbon Coatings.

In this work, Ti-incorporated carbon coatings were used as substrates for modification with one- and two-component self-assembled monolayers of organosilane compounds using a polydimethylsiloxane (PDMS) stamp. This enabled the selective functionalization of surfaces with micrometric dimensions. The topography of the modified surfaces was defined using an atomic force microscope (AFM). The effectiveness of the modification was confirmed by measurements of the water contact angle and surface free energy using the Oss and Good method. Using a T-23 microtribometer with counterparts in the shape of balls that were made of steel, silicon nitride (Si3N4), and zirconium dioxide (ZrO2), the tribological properties of the obtained coatings were tested. These investigations showed that modification by using a PDMS stamp makes it possible to produce two-component ultrathin silane layers on Ti-containing carbon substrates. Two-component organosilane layers had higher hydrophobicity, a lower friction coefficient, and a smaller width of wear tracks than the one-component analogs. It was also found that the work of adhesion of the created surfaces had a significant influence on the value of the friction coefficient and the percentage value of the growth inhibition of bacteria.

Antibacterial and Antiviral Activities of Silver Nanocluster/Silica Composite Coatings Deposited onto Air Filters.

The indoor air quality should be better controlled and improved to avoid numerous health issues. Even if different devices are developed for air filtration, the proliferation of microorganisms under certain conditions must be controlled. For this purpose, a silver nanocluster/silica composite coating was deposited via a cosputtering technique onto fiber glass and polymeric based substrates. The aim of this work is focused on the evaluation of the antibacterial and antiviral effects of the developed coating. The preliminary results of the compositional and morphological tests showed an evenly distributed coating on filters surfaces. Several antibacterial tests were performed, confirming strong effect both in qualitative and quantitative methods, against S. epidermidis and E.coli. To understand if the coating can stop the proliferation of bacteria colonies spread on it, simulation of everyday usage of filters was performed, nebulizing bacteria solution with high colonies concentration and evaluating the inhibition of bacteria growth. Additionally, a deep understanding of the virucidal action and mechanism of Ag nanoclusters of the coating was performed. The effect of the coating both in aqueous medium and in dry methods was evaluated, in comparison with analysis on ions release. The virucidal performances are assessed against the human coronavirus OC43 strain (HCoV-OC43).

Enhancing Mechanical Properties and Antimicrobial Activity of Portland Cement through Titanium Oxide Incorporation

The impact of various factors such as microbes, allergens, inadequate environmental conditions, pollutants, and suboptimal building materials on human health within indoor environments is of utmost importance due to the significant amount of time people spend inside buildings. The objective of this study was to assess the combination of Portland cement (PC) with Titanium Oxide (TiO2) nano powder for antimicrobial properties with good physical and mechanical strength. TiO2 was added to PC at various percentages (0.5%, 1.0% and 1.5% by the weight of cement) and analysis of slump flow, compressive strength and flexural strength were determined. The antimicrobial activity was evaluated by agar diffusion test, utilizing 4 bacteria strains: Escherichia coli, Staphylococcus aureus, Enterococcus faecalis and Pseudomonas aeruginosa. Results showed that the addition of TiO2 increased the mechanical strength of the specimen with 1.0% TiO2 displaying the optimum result. For the antimicrobial activity, samples with 1.05% TiO2 had the highest efficiency in inhibiting bacteria growth. The findings showed that a lower percentage of TiO2 added to the PC mortar significantly enhances its mechanical properties and is efficient in inhibiting the growth of bacteria. Such mortar mixture with antibacterial properties should be utilized to enhance hygiene conditions in diverse environments, including hospitals, institutional kitchens, etc., where such properties are necessary.