Image Quality Evaluation Research Articles

Shift-insensitive perceptual feature of quadratic sum of gradient magnitude and LoG signals for image quality assessment and image classification

Most existing full-reference (FR) Image quality assessment (IQA) models work in the premise of that the two images should be well registered. Shifting an image would lead to an inaccurate evaluation of image quality, because small spatial shifts are far less noticeable than structural distortion for human observers. To this regard, we propose to study an IQA feature that is shift-insensitive to the basic primitive structure of images, i.e., image edge. According to previous studies, the image gradient magnitude (GM) and the Laplacian of Gaussian (LoG) operator that depict the edge profiles of natural images are highly efficient structural features in IQA tasks. In this paper, we find that the Quadratic sum of the normalized GM and the LoG signals (QGL) has excellent shift-insensitive property in representing image edges after theoretically solving the selection problem of a ratio parameter to balance the GM and LoG signals. Based on the proposed QGL feature, two FR-IQA models can be built directly by measuring the similarity map with mean and standard deviation pooling strategies, named mQGL and sQGL, respectively. Experimental results show that the proposed sQGL and mQGL work robustly on four benchmark IQA databases, and QGL-based models show great shift-insensitive property to spatial translation and image rotation while judging the image quality. In addition, we explore the feasibility of combining QGL feature with deep neural networks, and verify that it can help to promote image pattern recognition in texture classification tasks.

Key-Point-Descriptor-Based Image Quality Evaluation in Photogrammetry Workflows

Photogrammetry depends critically on the quality of the images used to reconstruct accurate and detailed 3D models. Selection of high-quality images not only improves the accuracy and resolution of the resulting 3D models, but also contributes to the efficiency of the photogrammetric process by reducing data redundancy and computational demands. This study presents a novel approach to image quality evaluation tailored for photogrammetric applications that uses the key point descriptors typically encountered in image matching. Using a LightGBM ranker model, this research evaluates the effectiveness of key point descriptors such as SIFT, SURF, BRISK, ORB, KAZE, FREAK, and SuperPoint in predicting image quality. These descriptors are evaluated for their ability to indicate image quality based on the image patterns they capture. Experiments conducted on various publicly available image datasets show that descriptor-based methods outperform traditional no-reference image quality metrics such as BRISQUE, NIQE, PIQE, and BIQAA and a simple sharpness-based image quality evaluation method. The experimental results highlight the potential of using key-point-descriptor-based image quality evaluation methods to improve the photogrammetric workflow by selecting high-quality images for 3D modeling.

Developing a novel phantom for image quality evaluation in digital radiography

Evaluation of image quality in digital radiography is important to ensure accurate diagnosis. However, to perform image quality tests accurately and effectively, complex techniques and numerous phantoms are required. The aim of the study was to develop a novel phantom to allow a comprehensive evaluation of image quality in digital radiography. High-Density Polyethylene (HDPE) was used as the main material for the phantom. Physical image quality parameters such as effective Modulation Transfer Function (eMTF), effective Normalized Noise Power Spectra (eNNPS), effective Detective Quantum Efficiency (eDQE), as well as contrast and signal-to-noise ratio (SNR) evaluations can be conducted using the phantom. Preliminary preparation work was carried out through Monte Carlo simulations. The validation of the phantom was performed by comparing with standard phantom results. Physical image quality measurements were performed using an indirect digital radiography system. It was observed that there was a good agreement between the image quality measurement results performed with the standard phantom and the developed phantom. A strong correlation was determined between integrated effective DQE (IeDQE) results (R ≥ 0.97) obtained with HDPE and PMMA phantom. Simulation results regarding the transmission factor showed that HDPE could be an alternative to Polymethyl Methacrylate (PMMA) as a phantom material.

Performance of an ultra-fast deep-learning accelerated MRI screening protocol for prostate cancer compared to a standard multiparametric protocol

ObjectivesTo establish and evaluate an ultra-fast MRI screening protocol for prostate cancer (PCa) in comparison to the standard multiparametric (mp) protocol, reducing scan time and maintaining adequate diagnostic performance.Materials and methodsThis prospective single-center study included consecutive biopsy-naïve patients with suspected PCa between December 2022 and March 2023. A PI-RADSv2.1 conform mpMRI protocol was acquired in a 3 T scanner (scan time: 25 min 45 sec). In addition, two deep-learning (DL) accelerated sequences (T2- and diffusion-weighted) were acquired, serving as a screening protocol (scan time: 3 min 28 sec). Two readers evaluated image quality and the probability of PCa regarding PI-RADSv2.1 scores in two sessions. The diagnostic performance of the screening protocol with mpMRI serving as the reference standard was derived. Inter- and intra-reader agreements were evaluated using weighted kappa statistics.ResultsWe included 77 patients with 97 lesions (mean age: 66 years; SD: 7.7). Diagnostic performance of the screening protocol was excellent with a sensitivity and specificity of 100%/100% and 89%/98% (cut-off ≥ PI-RADS 4) for reader 1 (R1) and reader 2 (R2), respectively. Mean image quality was 3.96 (R1) and 4.35 (R2) for the standard protocol vs. 4.74 and 4.57 for the screening protocol (p < 0.05). Inter-reader agreement was moderate (κ: 0.55) for the screening protocol and substantial (κ: 0.61) for the multiparametric protocol.ConclusionThe ultra-fast screening protocol showed similar diagnostic performance and better imaging quality compared to the mpMRI in under 15% of scan time, improving efficacy and enabling the implementation of screening protocols in clinical routine.Clinical relevance statementThe ultra-fast protocol enables examinations without contrast administration, drastically reducing scan time to 3.5 min with similar diagnostic performance and better imaging quality. This facilitates patient-friendly, efficient examinations and addresses the conflict of increasing demand for examinations at currently exhausted capacities.Key PointsTime-consuming MRI protocols are in conflict with an expected increase in examinations required for prostate cancer screening.An ultra-fast MRI protocol shows similar performance and better image quality compared to the standard protocol.Deep-learning acceleration facilitates efficient and patient-friendly examinations, thus improving prostate cancer screening capacity.Graphical

Investigation in image quality and immediate patient safety using pre-dual-flow injection for low-contrast dose spectral pulmonary artery CT angiography

PurposeThe patient safety of iodine contrast-enhanced pulmonary artery CT angiography (CTPA) is widely concerned. This study aimed to investigate the image quality and immediate patient safety of spectral CTPA using a lower-contrast dose pre-dual-flow injection method. MethodsThis retrospective study included 120 patients with suspected pulmonary embolisms who received spectral CTPA between February and December 2022. Patients were divided into normal contrast injection (Group A, n=60) and pre-dual-flow group (Group B, n=60). CT values of pulmonary arteries (PAs) at different levels, signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR), arteriovenous separation performance, and beam hardening artifact (BHA) index of two sets of images were measured or calculated. The subjective image quality and immediate patient safety were also scored using the three-point method. ResultsGroup B had a contrast dose reduction by 42.5 % (60 vs. 34.5 mL). Radiation exposure dose was not statistically different between the two groups (P>0.05). CT values of different-level PAs on group B images were higher than those on group A images (P<0.05). Group B images had higher SNR and CNR, better arteriovenous separation between PA trunk and pulmonary vein, and lower BHA index on soft tissue and PA (all P<0.05). For subjective evaluation of image quality, group B had a better score in beam hardening artifact (P<0.05). For immediate patient safety, the score in comfortability was statistically higher in group B, with P<0.05. ConclusionsComparing with the normal injection method, pre-dual-flow spectral CTPA with a lower contrast dose injected results in better image quality and shows potential in patient-safety promotion.

Deep-learning denoising minimizes radiation exposure in neck CT beyond the limits of conventional reconstruction

BackgroundNeck computed tomography (NCT) is essential for diagnosing suspected neck tumors and abscesses, but radiation exposure can be an issue. In conventional reconstruction techniques, limiting radiation dose comes at the cost of diminished diagnostic accuracy. Therefore, this study aimed to evaluate the effects of an AI-based denoising post-processing software solution in low-dose neck computer tomography. Materials and MethodsFrom 01 September 2023 to 01 December 2023, we retrospectively included patients with clinically suspected neck tumors from the same single-source scanner. The scans were reconstructed using Advanced Modeled Iterative Reconstruction (Original) at 100% and simulated 50% and 25% radiation doses. Each dataset was post-processed using a novel denoising software solution (Denoising). Three radiologists with varying experience levels subjectively rated image quality, diagnostic confidence, sharpness, and contrast for all pairwise combinations of radiation dose and reconstruction mode in a randomized, blinded forced-choice setup. Objective image quality was assessed using ROI measurements of mean CT numbers, noise, and a contrast-to-noise ratio (CNR). An adequately corrected mixed-effects analysis was used to compare objective and subjective image quality. ResultsAt each radiation dose level, pairwise comparisons showed significantly lower image noise and higher CNR for Denoising than for Original (p < 0.001). In subjective analysis, image quality, diagnostic confidence, sharpness, and contrast were significantly higher for Denoising than for Original at 100 and 50 % (p < 0.001). However, there were no significant differences in the subjective ratings between Original 100 % and Denoising 25 % (p = 0.906). ConclusionsThe investigated denoising algorithm enables diagnostic-quality neck CT images with radiation doses reduced to 25% of conventional levels, significantly minimizing patient exposure.

Single Image Integrated Deblurring Algorithm in Non-Uniform Environment

Motion blurriness in an image caused by camera shake during exposure is unavoidable. It could lead to information loss and degradation in the image quality. Therefore, many researchers are dedicated to developing image deblurring techniques to recover clear images from blurred images. During the deblurring process, structural edges in images play a vital part in estimating the blur kernels. For images with rich textures, fine-scale edges become more apparent. This will cause vagueness in the image’s structural edges and affect the accuracy of the kernel estimation process. In this study, we propose a single-image motion deblurring by kernel estimation method combined with L0-Regularized Intensity and Gradient Prior, and enhanced Scale Aware Smoothing methods. Two types of non-uniform datasets are used, which are real and synthetic. While synthetic datasets are utilized to assess the consistency in performance across real and synthetic images, real datasets are used to portray the level of detail and variation of actual blurred images. The dataset is divided into five categories (people, nature, manmade, text, and night light). Two image quality metrics were selected: full-reference assessment, including learned perceptual image patch similarity (LPIPS), peak signal-to-noise ratio (PSNR), and structural similarity indexing method (SSIM) for synthetic datasets, and no-reference assessments, including blind/reference-less image spatial quality (BRISQUE), natural image quality evaluator (NIQE) and perception-based image quality evaluator (PIQE) for real datasets. According to the findings, the fusion method performs best in the text category, followed by manmade and in nature, then night light and poor in people. The proposed method not only removes fine-scale edges and preserves the boundary sharpness, but also improved the estimated blur kernel.

Neurovascular Imaging with Ultra-High-Resolution Photon-Counting CT: Preliminary Findings on Image-Quality Evaluation.

The first-generation photon-counting detector CT was recently introduced into clinical practice and represents a promising innovation in high-resolution CT imaging. The purpose of this study was to assess the image quality of ultra-high-resolution photon-counting detector CT compared with energy-integrating detector CT and to explore different reconstruction kernel sharpness levels for the evaluation of intracranial aneurysms. Ten patients with intracranial saccular aneurysms who had previously undergone conventional energy-integrating detector CT were prospectively enrolled. CT angiograms were acquired on a clinical dual-source photon-counting detector CT in ultra-high-resolution mode and reconstructed with 4 vascular kernels (Bv36, Bv40, Bv44, Bv48). Quantitative and qualitative image-quality parameters of the intracranial arteries were evaluated. For the quantitative analysis (image noise, SNR, contrast-to-noise ratio), ROIs were manually placed at standard anatomic intracranial and extracranial locations by 1 author. In addition, vessel border sharpness was evaluated quantitatively. For the qualitative analysis, 3 blinded neuroradiologists rated photon-counting detector CT and energy-integrating detector CT image quality for the evaluation of the intracranial vessels (ie, the aneurysms and 9 standard vascular branching locations) on a 5-point Likert-type scale. Additionally, readers independently selected their preferred kernel among the 4 kernels evaluated on photon-counting detector CT. In terms of quantitative image quality, Bv48, the sharpest kernel, yielded increased image noise and decreased SNR and contrast-to-noise ratio parameters compared with Bv36, the smoothest kernel. Compared with energy-integrating detector CT, the Bv48 kernel offered better quantitative image quality for the evaluation of small intracranial vessels (P < .001). Image-quality ratings of the Bv48 were superior to those of the energy-integrating detector CT and not significantly different from ratings of the B44 reconstruction kernel. When comparing side by side all 4 photon-counting detector reconstruction kernels, readers selected the B48 kernel as the best to visualize the aneurysms in 80% of cases. Ultra-high-resolution photon-counting detector CT provides improved image quality for neurovascular imaging. Although the less sharp kernels provided superior SNR and contrast-to-noise ratio, the sharpest kernels delivered the best subjective image quality on photon-counting detector CT for the evaluation of intracranial aneurysms.

Patient-derived PixelPrint phantoms for evaluating clinical imaging performance of a deep learning CT reconstruction algorithm.

Objective&#xD;Deep learning reconstruction (DLR) algorithms exhibit object-dependent resolution and noise performance. Thus, traditional geometric CT phantoms cannot fully capture the clinical imaging performance of DLR. This study uses a patient-derived 3D-printed PixelPrint lung phantom to evaluate a commercial DLR algorithm across a wide range of radiation dose levels.&#xD;&#xD;Method&#xD;The lung phantom used in this study is based on a patient chest CT scan containing ground glass opacities and was fabricated using PixelPrint 3D-printing technology. The phantom was placed inside two different size extension rings to mimic a small- and medium-sized patient and was scanned on a conventional CT scanner at exposures between 0.5 and 20 mGy. Each scan was reconstructed using filtered back projection (FBP), iterative reconstruction, and DLR at five levels of denoising. Image noise, contrast to noise ratio (CNR), root mean squared error (RMSE), structural similarity index (SSIM), and multi-scale SSIM (MS SSIM) were calculated for each image.&#xD;&#xD;Results&#xD;DLR demonstrated superior performance compared to FBP and iterative reconstruction for all measured metrics in both phantom sizes, with better performance for more aggressive denoising levels. DLR was estimated to reduce dose by 25-83% in the small phantom and by 50-83% in the medium phantom without decreasing image quality for any of the metrics measured in this study. These dose reduction estimates are more conservative compared to the estimates obtained when only considering noise and CNR. &#xD;&#xD;Conclusion&#xD;DLR has the capability of producing diagnostic image quality at up to 83% lower radiation dose, which can improve the clinical utility and viability of lower dose CT scans. Furthermore, the PixelPrint phantom used in this study offers an improved testing environment with more realistic tissue structures compared to traditional CT phantoms, allowing for structure-based image quality evaluation beyond noise and contrast-based assessments.

Image Fusion Method Based on Snake Visual Imaging Mechanism and PCNN.

The process of image fusion is the process of enriching an image and improving the image's quality, so as to facilitate the subsequent image processing and analysis. With the increasing importance of image fusion technology, the fusion of infrared and visible images has received extensive attention. In today's deep learning environment, deep learning is widely used in the field of image fusion. However, in some applications, it is not possible to obtain a large amount of training data. Because some special organs of snakes can receive and process infrared information and visible information, the fusion method of infrared and visible light to simulate the visual mechanism of snakes came into being. Therefore, this paper takes into account the perspective of visual bionics to achieve image fusion; such methods do not need to obtain a significant amount of training data. However, most of the fusion methods for simulating snakes face the problem of unclear details, so this paper combines this method with a pulse coupled neural network (PCNN). By studying two receptive field models of retinal nerve cells, six dual-mode cell imaging mechanisms of rattlesnakes and their mathematical models and the PCNN model, an improved fusion method of infrared and visible images was proposed. For the proposed fusion method, eleven groups of source images were used, and three non-reference image quality evaluation indexes were compared with seven other fusion methods. The experimental results show that the improved algorithm proposed in this paper is better overall than the comparison method for the three evaluation indexes.

Enhanced Solar Coronal Imaging: A GAN Approach with Fused Attention and Perceptual Quality Enhancement

The activity of the solar corona has a significant impact on all aspects of human life. People typically use images obtained from astronomical telescopes to observe coronal activities, among which the Atmospheric Imaging Assembly (AIA) of the Solar Dynamics Observatory (SDO) is particularly widely used. However, due to resolution limitations, we have begun to study the application of generative adversarial network super-resolution techniques to enhance the image data quality for a clearer observation of the fine structures and dynamic processes in the solar atmosphere, which improves the prediction accuracy of solar activities. We aligned SDO/AIA images with images from the High-Resolution Coronal Imager (Hi-C) to create a dataset. This research proposes a new super-resolution method named SAFCSRGAN, which includes a spatial attention module that incorporates channel information, allowing the network model to better capture the corona’s features. A Charbonnier loss function was introduced to enhance the perceptual quality of the super-resolution images. Compared to the original method using ESRGAN, our method achieved an 11.9% increase in Peak Signal-to-Noise Ratio (PSNR) and a 4.8% increase in Structural Similarity (SSIM). Additionally, we introduced two perceptual image quality assessment metrics, the Natural Image Quality Evaluator (NIQE) and Learned Perceptual Image Patch Similarity (LPIPS), which improved perceptual quality by 10.8% and 1.3%, respectively. Finally, our experiments demonstrated that our improved model surpasses other models in restoring the details of coronal images.

Evaluation of image quality on low contrast media with deep learning image reconstruction algorithm in prospective ECG-triggering coronary CT angiography.

To assess the impact of low-dose contrast media (CM) injection protocol with deep learning image reconstruction (DLIR) algorithm on image quality in coronary CT angiography (CCTA). In this prospective study, patients underwent CCTA were prospectively and randomly assigned to three groups with different contrast volume protocols (at 320mgI/mL concentration and constant flow rate of 5ml/s). After pairing basic information, 210 patients were enrolled in this study: Group A, 0.7mL/kg (n = 70); Group B, 0.6mL/kg (n = 70); Group C, 0.5mL/kg (n = 70). All patients were examined via a prospective ECG-triggered scan protocol within one heartbeat. A high level DLIR (DLIR-H) algorithm was used for image reconstruction with a thickness and interval of 0.625mm. The CT values of ascending aorta (AA), descending aorta (DA), three main coronary arteries, pulmonary artery (PA), and superior vena cava (SVC) were measured and analyzed for objective assessment. Two radiologists assessed the image quality and diagnostic confidence using a 5-point Likert scale. The CM doses were 46.81 ± 6.41mL, 41.96 ± 7.51mL and 34.65 ± 5.38mL for Group A, B and C, respectively. The objective assessments on AA, DA and the three main coronary arteries and the overall subjective scoring showed no significant difference among the three groups (all p > 0.05). The subjective assessment proved that excellent CCTA images can be obtained from the three different contrast media protocols. There were no significant differences in intracoronary attenuation values between the higher HR subgroup and the lower HR subgroup among three groups. CCTA reconstructed with DLIR could be realized with adequate enhancement in coronary arteries, excellent image quality and diagnostic confidence at low contrast dose of a 0.5mL/kg. The use of lower tube voltages may further reduce the contrast dose requirement.

Unveiling the potential of progressive training diffusion model for defect image generation and recognition in industrial processes

Industrial defect image generation is a crucial technique for augmenting defect image data, catering to fulfill the exigencies of training data necessary for defect recognition methods. In recent years, generative adversarial networks have seen widespread use in generating defect images. However, constrained by the scarcity of training data and the intricate variability in various defect categories, the existing methods are susceptible to issues such as training instability, a dearth of diversity, and suboptimal image quality. To overcome these challenges, this paper proposes a defect image generation framework based on a progressive training diffusion model (PTDM). Firstly, this study adopts a denoising diffusion model, supplanting traditional generative adversarial networks, to mitigate issues related to training instability and the dearth of diversity observed in generated images. Secondly, a novel progressive training strategy based on the self-designed image quality evaluator is developed to efficiently generate numerous defect images while maintaining quality. Finally, extensive experiments on a steel surface defect image dataset were conducted to validate the performance of the proposed framework in defect image generation and recognition tasks.

Image quality evaluation of a new high-performance ring-gantry cone-beam computed tomography imager

Objective. Newer cone-beam computed tomography (CBCT) imaging systems offer reconstruction algorithms including metal artifact reduction (MAR) and extended field-of-view (eFoV) techniques to improve image quality. In this study a new CBCT imager, the new Varian HyperSight CBCT, is compared to fan-beam CT and two CBCT imagers installed in a ring-gantry and C-arm linear accelerator, respectively. Approach. The image quality was assessed for HyperSight CBCT which uses new hardware, including a large-size flat panel detector, and improved image reconstruction algorithms. The decrease of metal artifacts was quantified (structural similarity index measure (SSIM) and root-mean-squared error (RMSE)) when applying MAR reconstruction and iterative reconstruction for a dental and spine region using a head-and-neck phantom. The geometry and CT number accuracy of the eFoV reconstruction was evaluated outside the standard field-of-view (sFoV) on a large 3D-printed chest phantom. Phantom size dependency of CT numbers was evaluated on three cylindrical phantoms of increasing diameter. Signal-to-noise and contrast-to-noise were quantified on an abdominal phantom. Main results. In phantoms with streak artifacts, MAR showed comparable results for HyperSight CBCT and CT, with MAR increasing the SSIM (0.97–0.99) and decreasing the RMSE (62–55 HU) compared to iterative reconstruction without MAR. In addition, HyperSight CBCT showed better geometrical accuracy in the eFoV than CT (Jaccard Conformity Index increase of 0.02–0.03). However, the CT number accuracy outside the sFoV was lower than for CT. The maximum CT number variation between different phantom sizes was lower for the HyperSight CBCT imager (∼100 HU) compared to the two other CBCT imagers (∼200 HU), but not fully comparable to CT (∼50 HU). Significance. This study demonstrated the imaging performance of the new HyperSight CBCT imager and the potential of applying this CBCT system in more advanced scenarios by comparing the quality against fan-beam CT.

Cascaded combination of total variation regularization and contrast limited adaptive histogram equalization based image dehazing

ABSTRACT Haze and fog can significantly reduce the visibility of distant objects by scattering light and creating blurry, washed-out images lacking in detail. Image dehazing is a technique used in computer vision to enhance the clarity of such obscured images. This study examines the effectiveness of various dehazing methods using real hazy images and synthetic images with artificially created haze. Performance metrics such as PSNR, SSIM, MSE, CII, and computation time are used to evaluate the proposed method. The evaluation is carried out on datasets like RESIDE, GMAN, O-Haze, I-Haze, NH-Haze, and Dense haze to compare the proposed method with existing models. The proposed method attains 27.46%, 20.63% and 21.09% higher PSNR and 12.36%, 23.95% and 36.12% lower Natural Image Quality Evaluator for RESIDE dataset when analyzed to the existing models, such as strategic method towards contrast enhancement by 2D histogram equalization under TV decomposition (CE-TDHE-TVD), multiple level framework basis contrast enhancement for uniform with non-uniform back ground imageries utilizing appropriate histogram equalization (CE-VHE), and Contrast enhancement with brightness preservation of low light pictures with the help of combined CLAHE and BPDHE histogram equalization (CE-CLAHE-BPDHE) respectively.

Evaluating the Quality of Serial EM Sections with Deep Learning.

Automated image acquisition can significantly improve the throughput of serial section scanning electron microscopy (ssSEM). However, image quality can vary from image to image depending on autofocusing and beam stigmation. Automatically evaluating the quality of images is, therefore, important for efficiently generating high-quality serial section scanning electron microscopy (ssSEM) datasets. We tested several convolutional neural networks for their ability to reproduce user-generated evaluations of ssSEM image quality. We found that a modification of ResNet-50 that we term quality evaluation Network (QEN) reliably predicts user-generated quality scores. Running QEN in parallel to ssSEM image acquisition therefore allows users to quickly identify imaging problems and flag images for retaking. We have publicly shared the Python code for evaluating images with QEN, the code for training QEN, and the training dataset.

Spiral time-of-flight magnetic resonance angiography for intracranial vascular imaging: performance compared to conventional Cartesian angiogram.

Computed tomography angiography (CTA) and digital subtraction angiography (DSA) usually raise the risk of potential malignancies with cumulative radiation doses. Current time-of-flight magnetic resonance angiography (TOF-MRA) (dubbed as cTOF), which is based on Cartesian sampling mode, may show limited diagnostic conspicuity at sinuous or branching regions. It is also prone to relatively high false positive diagnoses and undesirable display of distal intracranial vessels. This study aimed to use spiral TOF-MRA (sTOF) as a noninvasive alternative to explore possible improvement, such that the application of magnetic resonance angiography (MRA) can be extended to facilitate clinical examination or cerebrovascular disease diagnosis and follow-up studies. Initially, 37 patients with symptoms of dizziness or transient ischemic attack were consecutively recruited for suspected intracranial vascular disease examination from Zhongshan Hospital of Xiamen University between July 2020 and April 2021 in this cross-sectional prospective study. After excluding 1 patient with severe scanning artifacts, 1 patient whose scanning scope did not meet the requirement, and 1 patient with confounding tumor lesions, a total of 34 participants were included according to the inclusion and exclusion criteria. Each participant underwent intracranial vascular imaging with both sTOF and cTOF sequences on a 3.0 T MR scanner with a conventional head-neck coil of 16 channels. Contrast CTA or DSA was also performed for 15 patients showing pathology. Qualitative comparisons in terms of image quality and diagnostic efficacy ratings, quantitative comparisons in terms of signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), vessel length, and sharpness were evaluated. Pair-wise Wilcoxon test was performed to evaluate the imaging quality derived from cTOF and sTOF acquisitions and weighted Cohen's Kappa was conducted to assess the rating consistency between different physicians. Compared to cTOF, sTOF showed better performance with fewer artifacts. It can effectively alleviate false positives of normal vessels being misdiagnosed as aneurysm or stenosis. Improved conspicuity was observed in cerebral distal regions with more clearly identifiable vasculature at finer scales. Quantitative comparisons in selected regions revealed significant improvement of sTOF in SNR (P<0.01 or P<0.001), CNR (P<0.001), vessel length (P<0.001), and sharpness (P<0.001) as compared to cTOF. Besides, sTOF can depict details of M1 and M2 segments of middle cerebral artery (MCA) at metallic implant region, showing its resistance to magnetic susceptibility. The sTOF shows higher imaging quality and lesion detectability with reduced artifacts and false positives, representing a potentially feasible surrogate in intracranial vascular imaging for future clinic routines.

A novel RCACycleGAN model is proposed for the high-precision reconstruction of sparse TFM images

The sparse total focusing method (TFM) has been shown to enhance the computational efficacy of ultrasound imaging but the image quality of ultrasound regrettably deteriorates with an increase in the sparsity rate of array elements. Deep learning has made remarkable advancements in image processing and cycle-consistent generative adversarial networks (CycleGANs) have been extensively employed to reconstruct diverse image categories. However, due to the incomplete extraction of image feature information by the generator and discriminator in a CycleGAN, high-quality sparse TFM images cannot be directly reconstructed using CycleGANs. There is also a risk of losing crucial feature information related to minor defects. As a result, this paper modifies the generator and discriminator in the CycleGAN to construct a new relativistic discriminator and coordinate attention CycleGAN (RCACycleGAN) model, which enables high-precision reconstruction of sparse TFM images. The addition of the coordinate attention module to the CycleGAN enhances the defective feature representation by fully considering the channel and spatial correlation between regions and using the fusion of spatially perceived feature maps in different directions. It solves the problem of easy loss of defective key feature information. The relativistic discriminator replaces the PatchGAN discriminator in the CycleGAN and evaluates the quality of both real and sparse TFM reconstructed images to ensure a relative image quality evaluation. This process solves the problem of unstable image quality of the sparse TFM reconstructed image. Experimental results demonstrate that RCACycleGAN can stably reconstruct sparse TFM images even in small sample dataset scenarios. The proposed network model reconstructs images with better accuracy, including in terms of structural similarity, defect roundness and area, and has a shorter training time than several existing network models.

Realization of Dynamic Local Refresh on Liquid Crystal Display with Novel Partial Scan Gate Driver on Array

AbstractIn this paper, a novel partial scan Gate Driver on Array (GOA) architecture with gate and cascade scan separated output (GCSS‐GOA) is proposed. Combined with a newly designed timing controller (TCON) IC and IP, dynamic local refresh at any position and with different refresh rate at different area on liquid crystal display (LCD) panel are achieved. The driving schemes for dynamic local refresh and the display image quality evaluation results are also presented. For power consumption, it can be reduced by up to 50% respectively for GOA and data drivers in dynamic local refresh mode under 60 Hz benchmark refresh rate. This technology is also applicable to OLED, LED, e‐paper and other display products.

Low-dose versus standard-dose normal temporal bone CT in children: a comparison study

ObjectiveTo compare the image quality of normal anatomical structures and radiation dose on low-dose (LDCT) and standard-dose (SDCT) temporal bone CT in children.MethodsThe study included 45 LDCT (80 kV and 130 mAs) and 45 SDCT (120 kV and 170 mAs) scans in children, 1–15 years of age. LDCT and SDCT scans were analyzed on H60s and H70h reconstruction kernels, respectively. Two readers assessed the image quality for 25 anatomical structures, using a 5-point scale. A score of 3 and above was considered “sufficient” and 2 and below was considered “insufficient” image quality. Image noise, contrast, age and size-specific effective doses were calculated.ResultsDespite an increase in image noise on LDCT, image quality remained sufficient for most structures owing to increased image contrast. The median effective dose on LDCT, calculated with age-specific conversion factor, decreased by 72.9% and that calculated with size-specific conversion factor decreased by 81.8% compared to the dose on SDCT.ConclusionLDCT provides comparable image quality for evaluation of temporal bone with significant reduction in radiation dose in children.