High-resolution X-ray Diffraction Research Articles

Molybdenum and Vanadium-Codoped Cobalt Carbonate Nanosheets Deposited on Nickel Foam as a High-Efficient Bifunctional Catalyst for Overall Alkaline Water Splitting

To address issues of global energy sustainability, it is essential to develop highly efficient bifunctional transition metal-based electrocatalysts to accelerate the kinetics of both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Herein, the heterogeneous molybdenum and vanadium codoped cobalt carbonate nanosheets loaded on nickel foam (VMoCoCOx@NF) are fabricated by facile hydrothermal deposition. Firstly, the mole ratio of V/Mo/Co in the composite is optimized by response surface methodology (RSM). When the optimized composite serves as a bifunctional catalyst, the water-splitting current density achieves 10 mA cm−2 and 100 mA cm−2 at cell voltages of 1.54 V and 1.61 V in a 1.0 M KOH electrolyte with robust stability. Furthermore, characterization is carried out using field emission scanning electron microscopy-energy dispersive spectroscopy (FESEM-EDS), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Density functional theory (DFT) calculations reveal that the fabricated VMoCoCOx@NF catalyst synergistically decreases the Gibbs free energy of hydrogen and oxygen-containing intermediates, thus accelerating OER/HER catalytic kinetics. Benefiting from the concerted advantages of porous NF substrates and clustered VMoCoCOx nanosheets, the fabricated catalyst exhibits superior electrocatalytic performance. This work presents a novel approach to developing transition metal catalysts for overall water splitting.

Pinpointing lattice-matched conditions for wurtzite ScxAl1−xN/GaN heterostructures with x-ray reciprocal space analysis

Using comprehensive x-ray reciprocal space mapping, we establish the precise lattice-matching composition for wurtzite ScxAl1−xN layers on (0001) GaN to be x = 0.14 ± 0.01. 100 nm thick ScxAl1−xN films (x = 0.09–0.19) were grown in small composition increments on c-plane GaN templates by plasma-assisted molecular beam epitaxy. The alloy composition was estimated from the fit of the (0002) x-ray peak positions, assuming the c-lattice parameter of ScAlN films coherently strained on GaN increases linearly with Sc-content determined independently by Rutherford backscattering spectrometry [Dzuba et al., J. Appl. Phys. 132, 175701 (2022)]. Reciprocal space maps obtained from high-resolution x-ray diffraction measurements of the (101¯5) reflection reveal that ScxAl1−xN films with x = 0.14 ± 0.01 are coherently strained with the GaN substrate, while the other compositions show evidence of relaxation. The in-plane lattice-matching with GaN is further confirmed for a 300 nm thick Sc0.14Al0.86N layer. The full-width-at-half-maximum of the (0002) reflection rocking curve for this Sc0.14Al0.86N film is 106 arc sec and corresponds to the lowest value reported in the literature for wurtzite ScAlN films.

Ruthenium complexes with triazenide ligands bearing an N-heterocyclic moiety, and their catalytic properties in the reduction of nitroarenes.

A series of ruthenium complexes of formulae [RuCl(triazenide)(p-cymene)] have been synthesized using as ligand a triazenide monofunctionalized with an N-heterocyclic moiety. Nuclear magnetic resonance, high resolution mass spectrometry and X-ray diffraction were used to characterize the triazenide ligands and their complexes. In addition, these ruthenium complexes catalyzed the reduction of nitrobenzene to aniline in the presence of sodium borohydride and ethanol as solvent at room temperature. Notably, complex 5 was especially active in the reduction of nitroarenes substituted at the aromatic ring with electron-withdrawing or electron-donating fuctional groups affording the desired arylamines in good to excellent yields (80-100%). The role of the N-heterocyclic moiety on catalysis was explored.

Biphenyl tetracarboxylic acid-based metal-organic frameworks: a case of topology-dependent thermal expansion.

The large inherent flexibility and highly modular nature of metal-organic frameworks (MOFs) make them ideal candidates for the study of negative thermal expansion (NTE). Among diverse organic ligands, the biphenyl unit, which can unrestrictedly rotate along its C-C single bond, can largely enhance the structural flexibility. Herein, we explored the thermal expansion behaviors of four indium biphenyl tetracarboxylates (BPTCs). Owing to the different dihedral angles of BPTC ligands and coordination mode of In3+, they show distinct topologies: InOF-1 (nti), InOF-2 (unc), InOF-12 (pts) and InOF-13 (nou). Intriguingly, it is found that the thermal expansion is highly dependent on the specific topology. The MOFs featuring mononuclear nodes show normal positive thermal expansion (PTE), and the magnitudes of coefficients follow the trend of InOF-2 < InOF-12 < InOF-13, inversely related to averaged molecular volumes. In contrast, the InOF-1, composed of a 1D chain of corner-shared InO6 octahedrons, shows pronounced NTE. Detailed high-resolution synchrotron powder X-ray diffraction and lattice dynamic analyses shed light on the fact that NTE in the InOF-1 is a synergy effect of the spring-like distortion of the inorganic 1D helical chain and twisting of the BPTC ligands. The present work shows how the topological arrangement of building blocks governs the thermal expansion behaviors.

Effects of Fe substitution for Mn on structural, magnetic and magnetocaloric properties of TbMn2-xFexSi2

The structural and magnetic properties of TbMn2-xFexSi2 compounds (x = 0.0–0.4) have been investigated in details by high-resolution synchrotron x-ray and neutron powder diffraction, specific heat, and dc magnetization measurements. The replacement of Fe for Mn in TbMn2-xFexSi2 does not change the crystal structure but leads to a significant contraction of the unit cell (dV/dx ∼ - 6 Å3) and modification of three magnetic phase transition temperatures – the Curie temperatures Tc1, Tc2 and the Néel temperature TN. For example, the Tc1, Tc2 and TN values of TbMn2Si2 decrease from Tc1 = 50 K, Tc2 = 64 K and TN = 500 K to Tc1 = 27 K, Tc2 = 37 K and TN = 440 K for TbMn1.6Fe0.4Si2. Detailed neutron diffraction investigations have allowed us to determine the magnetic structures and construct the magnetic phase diagram as well as confirm the presence of magnetoelastic coupling effects. The significantly different responses of Tc1 and Tc2 to applied magnetic fields (e.g. dTc1/dB = 0.52 K/T and dTc2/dB = 4.7 K/T for TbMn1.6Fe0.4Si2), leads to expansion of the temperature region (ΔT = Tc2- Tc1) for the canted ferromagnetic state Fmc-ii between Tc1 and Tc2. In the case of TbMn1.6Fe0.4Si2, ΔT increases from ΔT = 9 K for applied magnetic field B = 0.2 T to ΔT = 36 K for B = 6 T, resulting in plateau-like behaviour of magnetic entropy change and enhances the relative cooling power (RCP) in this system. Under a change of magnetic field of 0 T – 5 T, the maximum value of the magnetic entropy changes -ΔSmax and adiabatic temperature change, ΔTad are derived to be -ΔSmax = 13.1 J/kg K and ΔTad = 8.4 K with the RCP = 411 J/kg for x=0.4 sample. The plateau-like magnetocaloric effect and relatively large RCP make these materials potentially suitable for application in cryogenic magnetic refrigeration.

A luminescent metal–organic framework composite as a turn-on sensor for the selective determination of monosodium glutamate in instant noodles

This work reports the development and application of a new fluorescent nanoprobe sensor depending on using luminescent metal organic framework (LMOF). The developed sensor composed of hybridized Ca 1,3,5-benzenetricarboxylic acid metal organic framework with microcrystalline cellulose (Ca-BTC/MCC MOF) as a fluorescent probe for the determination of the monosodium glutamate (MSG), a non-chromophoric food additive. The developed sensor was characterized using a high-resolution scanning electron microscope (HR-SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The Ca-BTC/MCC MOF hybrid, examined under the HR-SEM, showed morphological features different from the MCC and the Ca-BTC MOF. The diffraction patterns of Ca-BTC/MCC composites clearly displayed the characteristic Ca-BTC MOF diffraction bands, indicating that MCC was successfully incorporated in the formation of crystalline MOF hybrids. The FTIR spectra show the bands of MCC, as well as the bands of Ca-BTC MOFs. The prepared nanoprobe was successfully applied as a sensitive sensor for the determination of MSG in food sample. The method was validated following the International ICH (Q2)R2 guidelines in terms of precision, trueness and other main analytical figures of merit, comprised the green profile and practicability metrics. A wide linearity range was achieved (5–50 µg/mL) with good correlation coefficient (R2 ≥ 0.9993). The recoveries (%) were found in the range of 100.0 to 101.5 and the RSDs (%) were in the range of 0.1 to 0.9 %.These results show that the developed nanoprobe was selective, and highly accurate to determine this important food additive in the seasonings of instant noodles, also showing a reduced environmental impact based on the metrics currently accepted for the evaluation of the green profile and practicability.

Influence of low-temperature cap layer thickness on the structure and luminescence of InGaN/GaN multiple quantum wells

In order to effectively regulate the luminescence performance of MQW and enhance its optical quality, it is crucial to investigate the InGaN/GaN MQW's structure and luminescence properties. In this study the focus is how they are affected by low-temperature cap (LT-cap) layer's thickness which is grown above each InGaN well layer during growth process of InGaN/GaN multiple quantum well (MQW) samples in MOCVD system. This was achieved by analyzing high resolution X-ray diffraction (HRXRD) spectra, electroluminescence (EL) spectra, temperature-dependent photoluminescence (TDPL) spectra, and micro-area fluorescence imaging of these samples. The results show that changes in LT-cap layer's thickness even have no significant impact on some structural parameters of MQW, such as the thickness of the well layer, but have an influence on the In component of the well layer. Due to the existence of LT-cap layer, dissociation of InGaN can be effectually reduced. In addition, the augmentation of LT-cap layer's thickness will make polarization effect of the QW sample more remarkable, so that the blue shift of the EL peak with the augmentation of current injection increases. The change of LT-cap layer's thickness will also influence distribution of the tail states of the quantum wells, which leads to a different localization states for injected carriers. As LT-cap layer becomes getting thicker, the material's internal quantum efficiency (IQE) tends to decrease, which may result from an increase in non-radiative recombination centers.

Low loss ridge waveguides on the hybrid single crystalline silicon and lithium niobate thin films

The hybridization of silicon (Si) thin film and lithium niobate (LN) thin film with remarkable properties, including the excellent optical properties of LN, excellent electrical properties and mature processing advantages of Si, can provide an important material platform for integrated photonic applications. In this work, a 4-inch single crystalline Si thin film wafer was prepared using wafer bonding, grinding and polishing techniques on LN thin film substrate. The films were characterized by using high-resolution transmission electron microscopy (HRTEM). The interplanar spacings and strain of Si film were calculated by analysis of high-resolution X-ray diffraction (HRXRD). Si ridge straight waveguides were fabricated on the hybrid thin films, and the transmission loss was 1.2dB/cm. The near-field mode distribution of the waveguide was investigated by combining FDTD (Finite-Difference Time-Domain) simulation and end coupling measurement.

A luminescent metal–organic framework composite as a turn-on sensor for the selective determination of monosodium glutamate in instant noodles

This work reports the development and application of a new fluorescent nanoprobe sensor depending on using luminescent metal organic framework (LMOF). The developed sensor composed of hybridized Ca 1,3,5-benzenetricarboxylic acid metal organic framework with microcrystalline cellulose (Ca-BTC/MCC MOF) as a fluorescent probe for the determination of the monosodium glutamate (MSG), a non-chromophoric food additive. The developed sensor was characterized using a high-resolution scanning electron microscope (HR-SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The Ca-BTC/MCC MOF hybrid, examined under the HR-SEM, showed morphological features different from the MCC and the Ca-BTC MOF. The diffraction patterns of Ca-BTC/MCC composites clearly displayed the characteristic Ca-BTC MOF diffraction bands, indicating that MCC was successfully incorporated in the formation of crystalline MOF hybrids. The FTIR spectra show the bands of MCC, as well as the bands of Ca-BTC MOFs. The prepared nanoprobe was successfully applied as a sensitive sensor for the determination of MSG in food sample. The method was validated following the International ICH (Q2)R2 guidelines in terms of precision, trueness and other main analytical figures of merit, comprised the green profile and practicability metrics. A wide linearity range was achieved (5–50 µg/mL) with good correlation coefficient (R2 ≥ 0.9993). The recoveries (%) were found in the range of 100.0 to 101.5 and the RSDs (%) were in the range of 0.1 to 0.9 %.These results show that the developed nanoprobe was selective, and highly accurate to determine this important food additive in the seasonings of instant noodles, also showing a reduced environmental impact based on the metrics currently accepted for the evaluation of the green profile and practicability.

Enhancement of superconductivity and structural phase transitions under pressure in FeTe0.89S0.11

The ternary iron chalcogenide, FeTe0.89S0.11 is a prominent member of the family of Fe-based superconductors with an ambient pressure Tc of around 8K and a simple structure formed by layers of edge-sharing distorted tetrahedra separated by a van der Waals gap. Upon compression to 6GPa, the Tc increases monotonically to 11K. The superconductivity disappeared at about 6GPa which was correlated to a softening of a Raman mode. High-resolution synchrotron X-ray diffraction shows that the FeTe0.89S0.11 started to transform from the monoclinic phase described by space group Cm to a disordered triclinic phase described by space group P1 at around 10GPa (theoretical) - 14GPa (experimental). Due to the phase transition the studied material transforms from a layered compound to a polymer, which is accompanied by a volume collapse of 4.65%, indicating a discontinuous first-order phase transition. The disappearance of Raman modes, along with pressure independent resistivity, and ab initio calculations results support the structural and electronics phase transition. According to our results Fe(Te,S) may be useful for future high-field power applications being formed of relatively inexpensive and nontoxic elements.

Identifying orientation-dependent optical properties of single-crystalline β-Ga2O3 films

We explore the effect of crystallographic anisotropy on the optical properties of high-quality β-Ga2O3 thin films by conducting experimental measurements and theoretical simulations. High resolution x-ray diffraction measurements confirm the high-quality and the single crystalline quality, ruling out the effect of defects for all films. Raman spectra reveal the presence of anisotropy, as evident from a stronger Bg(2) mode related to GaIO4 chain libration in (100) orientation. Conversely, a stronger Ag(10) mode corresponding to tetrahedral bonds is evident in the (010) orientation, while it is suppressed in the (100) orientation. Low-temperature photoluminescence spectra indicate the presence of intrinsic impurity-related emissions in the ultraviolet and blue regions for all films. An anisotropic bandgap is observed, wherein the lowest bandgap value is related to the (010) oriented sample. Spectroscopic ellipsometry measurements confirm different refractive indices and extinction coefficient values depending on crystallographic orientation, which are in good agreement with the theoretical values obtained by density functional theory, confirming the anisotropic characteristics. The theoretical calculations of charge density show that the strength of covalent bonding depends on the β-Ga2O3 orientation, while experimental findings demonstrate that as the covalent bonding character increases, the film bandgap and the refractive index decrease. The anisotropy of β-Ga2O3 with respect to the crystal orientation leads to variations in the extinction coefficient, refractive index, and bandgap energy.

Insights into impact of shock wave on structural, optical and surface characteristics of ammonium pentaborate tetrahydrate single crystal

In this study, we are emphasizing on growth of bulk size optically transparent single crystals of ammonium pentaborate tetrahydrate (APB) using the slow evaporation solution technique at room temperature. Initially, crystalline phase of the compound was confirmed through the X-ray diffraction technique. Thereafter, APB has been analysed systematically for its crystallographic structural stability in such a way that its structure has been examined periodically at two shock wave (SW) loaded conditions using XRD measurements. Further, our research contains a comprehensive knowledge about effect of shock wave on rocking curve of APB single crystal measured through high resolution XRD measurement system and the changes in crystalline perfection due to shock wave was analysed. Also, modifications in optical properties were studied due to impact of shock waves. The transmittance was checked through UV-visible spectroscopy and the changes in optical band gap were examined. The defects generated in the APB crystal after every two shocks i.e., shockwave - sample interaction was scrutinized by photoluminescence spectroscopy and surface morphology studies in detail.

Growth of AlGaN alloys with ∼ 90 % AlN mole fraction by plasma-assisted molecular beam epitaxy: Indication of phase-segregation effects

AlGaN alloys with very high AlN mole fraction (∼90 %) were grown by plasma-assisted molecular beam epitaxy (PA-MBE) and their alloy properties were investigated by high-resolution X-ray diffraction (HR-XRD) measurements. Growth was carried out employing a series of group III/V ratios and for samples grown under a high group-III regime, phase-segregation in the alloy was evident from a characteristic splitting of the AlGaN (0002) peak in the HR-XRD pattern. With decreasing excess group-III conditions the separation of peak positions continuously reduced, till a single peak was observed. However, for samples where such splitting was absent, spontaneous superlattice peaks were seen at lower incident angles of the XRD patterns indicating the presence of long-range atomic ordering (LRAO). Thus, for AlGaN alloys with extremely high Al content, effects of phase-segregation, or of LRAO were observed, depending on the kinetics of growth. These results on phase-segregation effects are expected to promote the development of high-efficiency deep ultraviolet emitters for skin-safe germicidal action by mitigating the detrimental effect of dislocations and related non-radiative recombination centers through carrier localization processes at potential minima.

Numerical and experimental study on effect of induction heating parameters on the coating of Zn layer on mild steel

The objective of the study is to determine the most effective induction heating parameters for melting pure zinc selectively over the mild steel substrate surface. The numerical simulation on effect of induction heating parameters on the mild steel substrate is studied using COMSOL Multiphysics 5.6 software. The optimised effective parameters are used for the experimental analysis for the validation. Variables such as coil configuration, stand-off distance (SOD), coil current and frequency were systematically changed, and optimal settings were chosen on the basis of time temperature contour curve and the heating rate within the material. Results of the numerical analysis portrayed that a pancake coil geometrical configuration, SOD of 2 mm, coil current of 300 A and alternating frequency of 300 kHz were found as the optimum set of parameters for the effective surface repair. An experimental investigation was carried out by depositing a thin layer of zinc on mild steel substrate using the optimized parameters. The surface integrity of the coated specimen was examined through the high-resolution optical microscopy, X-ray diffraction and electron back scattered diffraction (EBSD) techniques. The hardness property of the coated specimen was examined with a Vickers microhardness tester. The microstructure analysis and hardness measurement showed that consistent coating is achieved without affecting the base metal/substrate properties. The experimental results very much coincide with the numerical simulation.

Synthesis and Physical Properties of the Misfit Layered Compound (EuS)1.13(NbSe2)2.

A new misfit layered compound with the stoichiometry (EuS)1+δ(NbSe2)2 (δ ≈ 0.13) has been successfully synthesized. High-resolution transmission electron microscopy and powder X-ray diffraction confirm the misfit structure with (EuS)-(EuS) spacing of 18.30(1) Å. Magnetization, electrical resistivity, heat capacity, and thermal transport measurements show that the material is a heavily doped semiconductor or poor metal with a low thermal conductivity of ∼1 W/m K and an antiferromagnetic ordering transition at TN = 4.7 K. In contrast to the parent materials, the misfit is neither ferromagnetic nor superconducting down to T = 0.4 K. We find evidence of a field-driven transition to a ferromagnetic state due to reorientation of ferromagnetic EuS layers at μoH = 0.5 T at T = 2 K.

A process-based geochemical framework for carbonate sediments during marine diagenesis

A significant proportion of marine calcium carbonate sediments are comprised of metastable minerals that are susceptible to diagenetic alterations during burial. These reactions can reset the geochemical signature of sediments and pore fluids and influence elemental cycling in the ocean. However, the timing and mechanisms by which these reactions take place are poorly constrained. This study uses cores drilled on the slope of the Great Bahama Bank to provide quantitative constraints on important diagenetic reactions; namely respiration-driven dissolution, authigenic carbonate mineral formation, and conversion of aragonite to low Mg calcite (LMC). We perform detailed mineralogical characterization using newly acquired, high resolution X-ray diffraction (XRD) data and over 1000 reanalyzed XRD scans, characterize sediments texturally and elementally using electron microprobe data, calculate pore fluid saturation state with respect to aragonite using a Pitzer ion interaction approach, and use pore fluid chemistry and experimental distribution coefficients to predict authigenic carbonate compositions. These data suggest that aerobic organic matter oxidation, enabled by the advection of oxygenated seawater throughout the upper ∼ 30 m interval of sediment, causes undersaturation and thus dissolution of biogenic high Mg calcite (HMC) and aragonite. Deeper, anaerobic organic matter oxidation takes over and causes supersaturation, promoting authigenic precipitation in the form of HMC, which in turn decreases pore fluid Mg/Ca and promotes aragonite conversion to LMC. One novel aspect of this study is the identification of three types of calcites using the newly acquired XRD and electron microprobe data. Based on their unique crystallographic characteristics and chemical compositions, these types of calcites are interpreted to represent pelagic biogenic LMC, bank-derived biogenic HMC, and authigenic HMC precipitated from pore fluids. Notably, the composition of the authigenic calcite matches that predicted to precipitate from pore fluids using an empirical Mg partition coefficient in calcite. Calcites that form authigenically and from aragonite via replacement are suggested to recrystallize with burial as evidenced by the decrease in Mg content and micro-strain. This process-based geochemical framework assigns diagenetic processes to a specific depth window within the sediment column and paves the way for a mechanistic understanding of carbonate diagenesis, one that is rooted in thermodynamic and kinetic bases.

Similarities and differences in the ordering at short and long ranges in a NaNbO3 based Pb-free smart system: a key to functional properties

In this study, we have investigated the crystal structure of the solid solution of antiferroelectric NaNbO3(NN) with ferroelectric Ba0.9Ca0.1TiO3(BCT), i.e. (1−x)NN- xBCT for 0⩽x⩽1.0 using High-resolution powder x-ray diffraction (HR-XRD) data, dielectric measurements in conjunction with Raman spectroscopic studies. The investigation of long-range structural phase transitions as a function of composition(x) using x-ray diffraction is complemented by short-range structural insights from Raman spectroscopy. The incorporation of BCT disrupts the delicate antiferroelectric ordering of NN and stabilizes various ferroelectric phases with increasing BCT content(x). At x = 0.10, the simultaneous presence of two ferroelectric phases viz., Pmc21 and Amm2, results in a threefold rise in remanent polarization compared to off-boundary compositions. The composition with higher BCT content (i.e. x⩾0.50 ) has shown the anomalous existence of two long-range cubic structures, both of which are characterized by Pm 3¯ m space group. In spite of having a two-phase long-range centrosymmetric structure, we have observed a slim Polarization vs. Electric field(P-E) hysteresis loop for 0.50⩽x⩽0.80 . This contrapositive behavior (i.e. hysteresis loop in a centrosymmetric structure) has been attributed to the correlations among local static polar distortions of rhombohedral type ascertained using Raman spectroscopy. The coexistence of two ferroelectric phases at room temperature(for x = 0.10) and a slim hysteresis loop (for 0.50⩽x⩽0.80 ) make these compositions potential ingredients for applications in ferroelectric memory and energy storage devices.

Ferroelectric behavior arising from polar topologies in epitaxially strained SrTiO3-δ ultrathin films

In this work, we show that epitaxially strained SrTiO3-δ thin films, grown by ion-beam sputtering onto (001)Nb:SrTiO3 substrates, exhibit a ferroelectric behavior. At the atomic-scale, through high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images, it was possible to identify the presence of polar nanoregions with non-trivial polar topological structures in the SrTiO3-δ film, which are induced through oxygen vacancies. To further confirm the presence of strained regions with a polar structure, Raman spectroscopy and high-resolution X-ray diffraction were employed and it was possible to confirm the presence of a tetragonal structure in the SrTiO3-δ film, with a tetragonality ratio (c/a) of 1.005. Scanning probe microscopy and macroscopic polarization-electric field hysteresis loops show ferroelectric behavior with maximum polarization of ∼1.5 μC/cm2, remnant polarization of ∼0.4 μC/cm2 and coercive field of ∼0.3 MV/cm. This work opens a window for exploring novel polar topological effects in sub-10 nm thin film materials for non-volatile memory application.

Synthesis and characterization of C@CdS core-shell structures for high-performance capacitors

The present study investigates the synthesis and characterization of carbon@cadium sulphide (C@CdS) core-shell nanostructures for their potential application in electrochemical double-layer (ECDL) capacitors. Two distinct synthesis methods, hydrothermal route and co-precipitation method, were employed to fabricate C@CdS materials, each resulting in unique morphology and growth mechanisms. Detailed microstructural analyses, including high-resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD), revealed nanosheets in co-precipitated sample (CCSP) and core-shell structures in hydrothermally synthesized sample (CCSA). Optical investigations using UV-Vis spectroscopy provided insights into the absorbance properties of the synthesized materials. Electrical characterization, including frequency response testing and impedance analysis, demonstrated distinct capacitive behaviours for CCSP and CCSA, highlighting their potential for use in energy storage applications. Electrical characterization, including frequency response testing, impedance analysis, and galvanostatic charge-discharge (GCD) curve analysis, demonstrated distinct capacitive behaviours for CCSP and CCSA, highlighting their potential for use in energy storage applications. The integration of optical, structural, and electrical analyses provides a comprehensive understanding of the synthesized C@CdS core-shell nanostructures, offering insights into their potential application for ECDL capacitor technology and other emerging energy storage applications. Further optimization of synthesis parameters and exploration of scalable production methods are suggested for future research endeavors.

Competitive nature of weak anti-localization and weak localization effect in Cr-doped sputtered topological insulator Bi2Se3 thin film

In the present study, we have investigated the effect of magnetic Cr doping on the transport properties of a sputtered Bi2Se3 thin film on the SrTiO3 (110) substrate. The high-resolution x-ray diffraction and Raman spectroscopy measurements revealed the growth of rhombohedral Bi2Se3 thin films. Further electronic and compositional analysis was done by x-ray photoemission spectroscopy and Rutherford backscattering spectroscopy, and the x-value was estimated to be 0.18 in the Bi2−xCrxSe3 thin film. The variation in the resistivity with temperature (2–300 K) revealed the metallic nature in undoped Bi2Se3 up to 30 K and upturn resistivity below 30 K. The Cr-doped Bi2Se3 resistivity data show a traditional semiconducting nature up to 25 K and take an abrupt upturn resistivity below 25 K. The resistivity behavior of both samples was explained by adopting a model that consists of the total resistance, a combination of bulk and surface resistance in parallel. The bulk bandgap value determined by this method is obtained to be 256 meV in an undoped Bi2Se3 thin film. Magnetoconductance data of the undoped thin film revealed a weak anti-localization (WAL) effect, while the Cr-doped thin film showed a weak localization (WL) effect at low temperatures (&amp;lt;50 K). At low magnetic field and low temperature, a competing nature of WAL and WL effects was prominent in the Cr-doped film. A drastic increase in the electrical resistance suggests that Cr doping can significantly modify the electrical properties of Bi2Se3 thin films, which could have potential applications in futuristic devices.