Figure Of Merit Research Articles

The figure of merit improvement of (Sn, Co)–ZnO sprayed thin films for optoelectronic applications

Nanocrystalline zinc oxide (ZnO) has garnered significant attention from researchers and industries due to its superior properties as an optoelectronic material, particularly in solar cells as a transparent electrode. Doping, especially with tin (Sn) and co-doping with tin and cobalt (Co), can refine its optoelectronic properties. In this manuscript, we report on the optoelectronic properties of undoped ZnO thin films, as well as those doped with Sn and/or Co, elaborated using a simple chemical pneumatic spray pyrolysis method on glass substrates. A 1 % Sn doping concentration was used, with Co doping concentrations of 0 %, 0.5 %, and 1 %. The effects of Sn and/or Co doping concentration on the structure, morphology, optical, and electrical properties of nanocrystalline ZnO were studied using X-ray diffractometer (XRD), Raman spectroscopy, Field emission scanning electron microscopy (FESEM), UV–Vis–NIR spectroscopy and Hall effect measurements. All the films studied exhibit wurtzite ZnO structures with a predominant (002) orientation and no secondary phase, as confirmed by X-ray diffraction (XRD) analysis. The Raman spectroscopy also reveals the presence of a wurtzite structure in all the films. The FESEM images reveal the kind and concentration of the dopants significantly influenced the surface morphology of the films. The elemental analysis with energy dispersive X-ray analysis (EDS) analysis successfully detected the doping of Sn and Co. The analysis of UV–Vis spectroscopy provide that the optical band gap for the undoped ZnO film is 3.25 eV. This band gap increases upon doping and co-doping, reaching a peak value of 3.30 eV for the Sn:Co (1 %:0.5 %) co-doped ZnO film. The ZnO film shows an improvement in the electrical resistivity upon doping and co-doping with low resistivity value of 1.95 × 10−2 Ω cm for the film (1%Sn, 0.5 % Co)–ZnO. The highest figure of merit (FOM) achieved is 1.41 × 10−4 Ω−1 for a ZnO thin film co-doped with (1 % Sn, 0.5 % Co). The existence of (1 % Sn, 0.5 % Co) film with improved optical gap, low electrical resistivity and high FOM supports its use in transparent conductive oxide applications.

0.35 V Subthreshold Bulk-Driven CMOS Second-Generation Current Conveyor

This study describes a high-performance second-generation Current Conveyor (CCII) operating at 0.35 V and achieving rail-to-rail operation at the Y terminal and class AB current drive at the X and Z terminals. The solution utilizes a low-voltage subthreshold bulk-driven CMOS OTA that was experimentally developed earlier, making systematic use of body terminals to improve small-signal and large-signal performance. The circuit has a high open-loop voltage gain and uses cascoded current mirror topologies, resulting in precise voltage and current transfer with bandwidths of 1.33 MHz and 2.13 MHz, respectively. The CCII offers a linear current drive up to 2.5 µA while consuming a total quiescent current of 2.86 µA (758 nA in the output branches), displaying one the highest figures of merit in terms of current utilization for sub 1 V solutions.

Adaptive ferroelectric states in KNN-based piezoceramics: Unveiling the mechanism of enhancing piezoelectric properties through multiple phase boundary engineering

Developing high-performance lead-free piezoceramics, such as (K,Na)NbO3 (KNN) material, is critical to achieving environmental sustainability in next-generation electromechanical devices. Although substantial advancements have been made in KNN-based ceramics, a general coherent framework is lacking that links microscopic structure to the enhancement of macroscopic properties. Our findings indicate that the enhanced performance of KNN-based ceramics in multiphase coexistence boundaries can be attributed to the formation of self-adjusting nanodomains in response to strong local structural heterogeneity. The self-adjusting behavior of domain structure is an outcome of minimizing the local stress generated by the lattice mismatch within KNN-based ceramics, which conforms to the thermodynamic principles that favor minimizing total free energy. Guided by this strategy, the present work achieves a significant improvement of electromechanical properties, including a piezoelectric coefficient (d33) of ∼585 pC N−1, an electromechanical coupling factor (kp) of ∼62 %, and a figure of merit (d33 × g33) of ∼12.78 ×10−12 m2 N−1. This study offers a new strategy for developing lead-free piezoceramics through dedicated design of novel phase boundaries.

High-fidelity computational study of aerodynamic noise of side-by-side rotor in full configuration

This paper presents a numerical study of side-by-side rotor aircraft in full configuration during hover using high-fidelity computational fluid dynamics (CFD) and aeroacoustic simulations. CFD simulations are performed using HPCMP CREATE™-AV Helios, while acoustic calculations are conducted with PSU-WOPWOP. Overset structured grids are applied using the SA-DES turbulence model along with adaptive mesh refinement in the near- and off-body meshes. Four overlap cases at a specific collective pitch angle of 8° are considered. Results reveal a substantial influence of the fuselage on rotor performance, with improvement in the figure of merit being observed for each overlap configuration due to a partial ground effect. There is considerable increase in blade sectional thrust, pressure fluctuations, and noise levels seen in the 0% overlap configuration compared to the 25% overlap configuration. This increase is primarily due to the absence of rotor overlap, resulting in a lower induced velocity allowing for flow to travel upward, and reaching the rotor disk plane. The acoustic spectrum appears at all harmonics of the blade passing frequency for the 0% and 5% overlap configurations. In contrast, the acoustic spectrum is distinctly present only at even harmonics for the 15% and 25% overlap cases. A noise reduction benefit of 3-5 dBA is noticed in the full configuration cases having rotor overlap compared to the 0% overlap configuration. Acoustic destructive interference is observed in the directivity plot only for the 15% and 25% overlap configurations. Overall, this paper reveals that the fuselage has a significant impact on the performance, aerodynamics, and aeroacoustics of the side-by-side UAM vehicle in hover.

Portable on–off visual-mode detection using intrinsic fluorescent zinc-based metal–organic framework for detection of diclofenac in pharmaceutical tablets

On-site, robust, and quantitative detection of diclofenac (DCF) is highly significant in bioanalysis and quality control. Fluorescence-based metal–organic frameworks (MOFs) play a pivotal role in biochemical sensing, offering a versatile platform for detecting various biomolecules. However, conventional fluorescent MOF sensors often rely on lanthanide metals, which can pose challenges in terms of cost, accessibility, and environmental impact. Herein, an intrinsic blue fluorescent zinc-based metal–organic framework (FMOF-5) was prepared free from lanthanide metals. Coordination-induced emission as an effective strategy was followed wherein a non-fluorescent ligand is converted to a fluorescent one after insertion in a framework. Conventional fluorometry and smartphone-assisted visual methods were employed for the detection of DCF. The fluorescence emission of the FMOF-5 was effectively quenched upon the addition of the DCF, endowing it an “off” condition, which permits the construction of a calibration curve with a wide linear range of 30–670 µM and a detection limit of about 4.1 µM. Other analytical figures of merit, such as linearity, sensitivity, selectivity, accuracy, and precision were studied and calculated. Furthermore, the proposed sensor was successfully applied to quantify DCF in pharmaceutical tablets with reliable recovery and precision. Importantly, the elimination of lanthanide metals from the fluorescence detection system enhances its practicality and sustainability, making it a promising alternative for DCF detection in pharmaceutical analysis applications.

An enzyme cascade biosensor based on multiwalled carbon nanotube-RuO2 nanocomposite for selective amperometric determination of lactose in milk samples

An enzyme-based electrochemical biosensor was fabricated for the sensitive determination of lactose. The utilized enzyme cascade system is composed of β-galactosidase (β-Gal) and glucose oxidase (GOx). The ruthenium(IV) oxide (RuO2) presents in MWCNT-RuO2 nanocomposite immobilized on the glassy carbon electrode acts as an electrochemical mediator, resembling a second-generation enzyme biosensor. The functional mechanism of the biosensor was discussed, explaining the chemical oxidation of H2O2, the final product of the enzymatic reaction, by RuO2 and subsequent reoxidation of generated Ru to RuO2 at the electrode surface. This shifts the oxidation of H2O2 to a lower potential magnitude of +0.40 V, enhancing the biosensor’s selectivity. The analytical figures of merit were verified for the developed lactose biosensor through repetitive measurements. The precision of the lactose biosensor was ensured with good reproducibility (RSD % = 2.68) and repeatability (RSD % = 4.12). The selectivity of the biosensor towards various saccharides and ionic species potentially present in milk samples was investigated, and no notable interference effect was detected. Moreover, the accuracy of the lactose biosensor was tested by analyzing spiked samples and a semi-skimmed milk (SS-milk) sample with certified lactose values. The limit of detection (LOD) and limit of quantification (LOQ) were calculated to be (0.036 mM) and (0.121 mM), respectively. Thanks to the short response time of the fabricated lactose biosensor, it was transferred to a screen-printed carbon electrode (SPCE) and successfully employed in flow injection analysis (FIA).

Double tunable Fano resonance based on a metal–insulator–metal waveguide with double coupled cavities and its application

A metal–insulator–metal (MIM) waveguide with a ring cavity (RC) and a half ring cavity (HRC) is proposed to realize the detection of two mediums simultaneously based on independently tunable double Fano resonances. Utilizing numerical simulation of the finite element method, the transmission characteristics and magnetic field distribution are investigated. The simulation findings indicate that the structure is capable of generating double Fano resonances, and the two Fano resonances are tuning independently. The maximum sensitivity and figure of merit (FOM) are 2385 nm/RIU (refractive index unit) and 31886RIU−1, respectively, and these values are achieved by changing the structural parameters and the refractive index of the insulator. Moreover, the sugar content in flavor and the concentration of ethanol solution can be detected at the same time, which indicates the high efficiency of the sensor. Therefore, these performances demonstrate that the tunable double Fano resonance based on a MIM waveguide is a hopeful method for chemical detection.

First principle investigations of opto-electronic and thermoelectric response of A2TlAsX6 (A = K, Rb; X = Cl, Br) compounds

We have investigated the structural, electronic, optical, and thermoelectric behavior of halide-based double perovskites A2TlAsX6 (A = K, Rb; X = Cl, Br) compounds to reveal their potential in various opto-electronic and thermoelectric applications using first-principle calculations. For the computation of the various properties of A2TlAsX6 (A = K, Rb; X = Cl, Br) compounds, we have used approximations available within density functional theory (DFT). The energy bands and density of states have been used to elucidate the electronic response of the studied compounds, while the interpretation of optical properties is presented in terms of dielectric tensor, absorption coefficient, reflectivity, refraction and energy loss spectra. The investigated compounds exhibit a direct band gap within the energy range of 1.36 to 2.24 eV, indicating the promising nature of these compounds for diverse optoelectronic applications. Moreover, thermoelectric properties such as the figure of merit, power factor, Seebeck coefficient, specific heat, electric and thermal conductivity have also been computed for the studied compounds. Our investigation unveils the remarkable optoelectronic characteristics of the studied perovskites, which can be attributed to their advantageous bandgap and highly effective light absorption capabilities. Furthermore, these perovskites showcase exceptional thermodynamic stability, elevated electrical conductivity, favorable figure of merit (ZT) values, and reduced thermal conductivities. These findings suggest their suitability for applications in optoelectronic devices and thermoelectric applications. In this study, it is found that A2TlAsBr6 compounds exhibit significant absorption in the visible spectrum, rendering them more favorable for optoelectronic applications compared to A2TlAsCl6 compounds. Conversely, for thermoelectric applications, the Cl-based perovskites studied show greater promise than their Br-based counterparts. The modified Becke–Johnson (mBJ) potential emerges as the most precise approach for analyzing the electronic, optical, and thermoelectric characteristics of A2TlAsX6 (where A = K, Rb; X = Cl, Br) perovskites, surpassing other approximations utilized in present study.

Implementation of two-step gradual reset scheme for enhancing state uniformity of 2D hBN-based memristors for image processing

In-memory computing facilitates efficient parallel computing based on the programmable memristor crossbar array. Proficient hardware image processing can be implemented by utilizing the analog vector-matrix operation with multiple memory states of the nonvolatile memristor in the crossbar array. Among various materials, 2D materials are great candidates for a switching layer of nonvolatile memristors, demonstrating low-power operation and electrical tunability through their remarkable physical and electrical properties. However, the intrinsic device-to-device (D2D) variation of memristors within the crossbar array can degrade the accuracy and performance of in-memory computing. Here, we demonstrate hardware image processing using the fabricated 2D hexagonal boron nitride-based memristor to investigate the effects of D2D variation on the hardware convolution process. The image quality is evaluated by peak-signal-to-noise ratio, structural similarity index measure, and Pratt’s figure of merit and analyzed according to D2D variations. Then, we propose a novel two-step gradual reset programming scheme to enhance the conductance uniformity of multiple states of devices. This approach can enhance the D2D variation and demonstrate the improved quality of the image processing result. We believe that this result suggests the precise tuning method to realize high-performance in-memory computing.

A luminescent metal–organic framework composite as a turn-on sensor for the selective determination of monosodium glutamate in instant noodles

This work reports the development and application of a new fluorescent nanoprobe sensor depending on using luminescent metal organic framework (LMOF). The developed sensor composed of hybridized Ca 1,3,5-benzenetricarboxylic acid metal organic framework with microcrystalline cellulose (Ca-BTC/MCC MOF) as a fluorescent probe for the determination of the monosodium glutamate (MSG), a non-chromophoric food additive. The developed sensor was characterized using a high-resolution scanning electron microscope (HR-SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The Ca-BTC/MCC MOF hybrid, examined under the HR-SEM, showed morphological features different from the MCC and the Ca-BTC MOF. The diffraction patterns of Ca-BTC/MCC composites clearly displayed the characteristic Ca-BTC MOF diffraction bands, indicating that MCC was successfully incorporated in the formation of crystalline MOF hybrids. The FTIR spectra show the bands of MCC, as well as the bands of Ca-BTC MOFs. The prepared nanoprobe was successfully applied as a sensitive sensor for the determination of MSG in food sample. The method was validated following the International ICH (Q2)R2 guidelines in terms of precision, trueness and other main analytical figures of merit, comprised the green profile and practicability metrics. A wide linearity range was achieved (5–50 µg/mL) with good correlation coefficient (R2 ≥ 0.9993). The recoveries (%) were found in the range of 100.0 to 101.5 and the RSDs (%) were in the range of 0.1 to 0.9 %.These results show that the developed nanoprobe was selective, and highly accurate to determine this important food additive in the seasonings of instant noodles, also showing a reduced environmental impact based on the metrics currently accepted for the evaluation of the green profile and practicability.

Introduction of interstitial Cu atoms is beneficial to improving the thermoelectric performance of TiNiSn

The effect of interstitial Cu on the thermoelectric properties of TiNiSn was evaluated by microwave and spark plasma sintering. It is demonstrated that the interstitial Cu optimize the carrier concentration and mobility, and that segregation of Cu at grain boundaries makes an additional contribution to the electrical conductivity. The goal of great increasing the electrical conductivity while maintaining a high Seebeck coefficient is realized, resulting in a maximum of 3703.6 μWm−1K−2 at 673 K. Furthermore, the samples enhance the high-frequency phonon scattering by introducing more point defects. And the mass fluctuation scattering and stress field fluctuation scattering induced by the interstitial Cu further decrease the lattice thermal conductivity to 1.91 Wm−1K−1 at 773 K, a reduction of 64.7 % compared to the pure sample. The dimensionless figure of merit (ZT) of the TiNiCu0.055Sn is even higher by 78.7 %, with a maximum of 0.62.

Thermal design of a non-isothermal microfluidic channel for measuring thermophoresis

Thermophoresis describes mass transport in a non-isothermal temperature field and thus provides a fundamental understanding of the behavior of colloidal particles. Various methods have been proposed for measuring the Soret coefficient, a representative value of thermophoresis. In particular, microscopic channels are an emerging method as they shorten the equilibrium time and allow direct observation of the particles. However, little emphasis has been placed on the simultaneous consideration of fluid dynamics, heat transfer, and mass transfer characteristics within the microfluidic channel, despite the simultaneous presence of natural convection and thermodiffusion phenomena. In this study, we present a novel approach to address this gap by introducing a figure of merit, which incorporates essential parameters to accurately characterize a specific cell configuration. This figure of merit allows for the identification of a reliable measurement range in a microfluidic channel with a temperature gradient, while accounting for fluid dynamics, heat transfer, and mass transfer characteristics. The proposed approach is validated through rigorous simulations and experiments, enabling an evaluation of the impact of figure of merit-derived parameters on the measurement channel. The findings from our study demonstrate that the figure of merit serves as a representative measure for stable thermophoretic measurements in a microfluidic channel. Moreover, we propose a threshold value that signifies the transition from a diffusion-dominant to a convection-dominant field.

Investigation of Dual-Layer Si-ITO-Dielectric Based Hybrid Plasmonic Electro-Absorption Modulator at 1.55 µm Wavelength

ABSTRACT In this paper, a dual-layer plasmonic material-based electro-absorption modulator (EAM) is designed and investigated. Indium-tin-oxide (ITO), along with dielectric materials such as boron nitride (hBN) and hafnium dioxide (HfO2), is integrated into the Si waveguide for tuning the light propagating inside the device. The device showed enhanced performance in terms of extinction ratio (ER) = 34.48 dB/µm, the figure of merit (FOM) = 493, and insertion loss (IL) = 0.06 dB/µm for On-state at 1.55 µm wavelength. Also, the dual-state behavior of the EAM was observed and investigated. An IL of 22.22 dB/µm and 25.39 dB/µm was observed for the Off-On and On-Off configurations, respectively. A modulation frequency ( f 3 dB ) of 1.72 THz and 340 GHz was achieved for the EAM with hBN and HfO2 as the dielectric material. The investigated EAM with different dielectric materials has the potential to be integrated into future-generation photonic integrated circuits (PICs).

Real-time passive underwater localization using a compact acoustic sensor array

This paper proposes an underwater passive localization system that can be installed on remote platforms and can locate in real-time sound sources using a compact 4-element array. The localization system relies on both the Time Difference of Arrival (TDoA) algorithm to localize sources that are impulsive, and a low-complexity implementation of the matched field processing (MFP) algorithm for broadband continuous waves, such as propeller noise. The array is intended to be mounted on small platforms and compact geometries are investigated to optimize the localization accuracy. Figures of merit are defined to assess the accuracy and reliability of the algorithm as a function of the distance between the elements. The proposed algorithm is implemented on a System-on-Chip (SoC) which executes the algorithm on an embedded system for real-time operation. Finally, the performance is assessed in realistic ocean conditions in different environments. It is shown that the MFP provides an excellent angle estimate for broadband continuous sources, but TDoA is more reliable, particularly when the deployment is sensitive to the environment conditions.

Sensitivity analysis with various parameters in undermoded reverberation chambers

PurposeThe purpose of this paper is to investigate the influence of measurement uncertainties and the environment characteristics themselves on the desired field uniformity (FU) in reverberation chambers (RCs) by means of state-of-the-art global sensitivity analysis techniques. There are many quantities to describe the FU. The authors attempted to inspect many of the most important ones in two different orientations of the stirrer (horizontal, vertical).Design/methodology/approachSurrogate modelling techniques are involved to compute the Sobol’ indices efficiently with a modest number of required electromagnetic (EM) simulations. This can be only achieved if the behaviour of an appropriately chosen output quantity is predictable in such a way, which enables to extract useful information. Therefore, this choice should be made with extra care of the stochastic fluctuations, which have to be as low as possible. To this end, in this paper, various figures of merit are investigated.FindingsThis method can provide useful knowledge in the lower frequency range, where the ideal properties of the EM field in RCs cannot be established, and the importance of the setup parameters can vary from configuration to configuration.Originality/valueConsidering the current research tendencies related to RCs, the application of the method of Sobol’ indices to RCs is unique, which has only been done by the authors of this work so far. The main contribution presented in the paper is the thorough investigation of the effect of configuration parameters on the statistical properties of RCs through many output quantities describing the FU.

Recent Advances in the Determination of Major and Trace Elements in Plants Using Inductively Coupled Plasma Optical Emission Spectrometry.

Interest in measuring major and trace elements in plants has increased in recent years because of growing concerns about the elements' contribution to daily intakes or the health risks posed by ingesting vegetables contaminated by potentially toxic elements. The recent advances in using inductively coupled plasma atomic emission spectrometry (ICP-OES) to measure major and trace elements in plant samples are reviewed in the present work. The sample preparation before instrumental determination and the main advantages and limitations of ICP-OES are described. New trends in element extraction in liquid solutions using fewer toxic solvents and microextractions are observed in recently published literature. Even though ICP-OES is a well-established and routine technique, recent innovations to increase its performance have been found. Validated methods are needed to ensure the obtaining of reliable results. Much research has focused on assessing principal figures of merit, such as limits of detection, quantification, selectivity, working ranges, precision in terms of repeatability and reproducibility, and accuracy through spiked samples or certified reference materials analysis. According to the published literature, the ICP-OES technique, 50 years after the release of the first commercially available equipment, remains a powerful and highly recommended tool for element determination on a wide range of concentrations.

Phase Transitions and Thermoelectric Properties of Charge-Compensated ZnxCu12-xSb4Se13.

In this study, we investigated the phase transitions and thermoelectric properties of charge-compensated hakite (ZnxCu12-xSb4Se13) as a function of Zn content. Based on X-ray diffraction and a differential scanning calorimetric phase analysis, secondary phases (permingeatite and bytizite) transformed into hakite depending on the Zn content, while Zn2Cu10Sb4Se13 existed solely as hakite. Nondegenerate semiconductor behavior was observed, exhibiting increasing electrical conductivity with a rising temperature. With an increase in Zn content, the presence of mixed phases of hakite and permingeatite led to enhanced electrical conductivity. However, Zn2Cu10Sb4Se13 with a single hakite phase exhibited the lowest electrical conductivity. The Seebeck coefficient exhibited positive values, indicating that even after charge compensation (electron supply) by Zn, p-type semiconductor characteristics were maintained. With the occurrence of an intrinsic transition within the measured temperature range, the Seebeck coefficient decreased as the temperature increased; at a certain temperature, Zn2Cu10Sb4Se13 exhibited the highest value. Thermal conductivity showed a low temperature dependence, obtaining low values below 0.65 Wm-1K-1. A power factor of 0.22 mWm-1K-2 and dimensionless figure of merit of 0.31 were achieved at 623 K for ZnCu11Sb4Se13.

Superluminal light propagation in a three-level ladder system

Superluminal light propagation is typically accompanied by significant absorption that might prevent its observation in realistic samples. We propose an all-optical implementation exploiting the two-photon resonance in three-level media to overcome this problem. With several computational methods, we analyze three possible configurations of optically-dressed systems and identify an optimal configuration for superluminal propagation. Due to the far-detuned operating regime with low absorption, this scenario avoids the usual need for population inversion, gain assistance or nonlinear optical response. Our analysis covers a broad parameter space and aims for the identification of conditions where significant pulse advancement can be achieved at high transmission levels. In this context, a figure of merit is introduced accounting for a trade-off between the desired group-index values and transmission level. This quantity helps to identify the optimal characteristics of the dressing beam.

Thermoelectric response in zigzag chains: Impact of irradiation-induced conformational changes

This study explores the enhancement of thermoelectric response in a zigzag chain through irradiation with arbitrarily polarized light. The irradiation induces changes in hopping strengths, creating an asymmetric transmission profile around the Fermi energy, which is a crucial factor for achieving a higher figure of merit (FOM). Specific light configurations result in an FOM exceeding unity. We employ the Floquet–Bloch ansatz and minimal coupling scheme to model the irradiation effect, with transport properties evaluated using Green’s function technique within the Landauer–Büttiker formalism. The investigation covers electrical conductance, thermopower, and thermal conductance due to electrons and phonons. Our research deepens understanding and opens avenues for tailoring nanostructures to fine-tune thermoelectric properties, advancing highly efficient energy conversion devices exploiting irradiation effects.

Study of alkaline metals hydrides RbXH3 (X = Mg/Ca/Sr/Ba) for green energy and hydrogen storage applications

The potential of hydrogen as an energy source has positioned hydrogen storage as a prominent research domain in the current era. Innovative perovskite compounds have emerged as a focal point for investigating hydrogen storage applications. In this study, we have investigated the RbXH3 (X = Mg/Ca/Sr/Ba) perovskite hydrides by density functional theory (DFT). Our exploration encompasses the analysis of electronic structures, mechanical stability, elastic properties, and optical and thermoelectric response. The cubic crystal structures of RbXH3 are revealed, with lattice constants of 4.13, 4.54, 4.82, and 5.17 Å for X = Mg, Ca, Sr, and Ba, respectively. Electronic structure calculations indicate ionic bonding with a wide bandgap reduced with increasing size of X. Mechanical stability, essential for meeting the Born stability criterion, is scrutinized, whereas Pugh criteria suggest a ductile and hard nature for these materials. Thermoelectric characteristics regarding electrical and thermal conductivity, Seebeck coefficient, and power factors are elaborated. The figure of merit emphasizes their suitability for thermoelectric devices. The Gravimetric ratios indicate the hydrogen storage capability, potentially contributing to various transportation and power applications.