Fiber-reinforced Polymer Reinforcement Research Articles

Shear strength model of FRP-reinforced concrete beams without shear reinforcement

The current design codes for evaluating the shear strength of concrete beams reinforced with fiber-reinforced polymer (FRP) bars predominantly rely on a semi-empirical approach through test data calibration without a robust theoretical background. This approach may lead to either overestimation or underestimation, resulting in significant scattering in strength predictions. This study proposed a modified approach to enhance the existing unified shear-strength model developed for steel-reinforced concrete (RC) beams based on the compression zone failure mechanism, for predicting the shear strength of FRP-RC beams without shear reinforcement. The proposed model integrates strain and stress approaches, accounting for the distinctive characteristics associated with FRP reinforcement. Additionally, the overall shear resistance capacity of the FRP-RC beam is considered as the sum of contributions from the intact concrete of the compression zone and the aggregate interlock mechanism. The reliability of the proposed model is verified by comparing its predictions with a comprehensive database comprising 264 FRP-RC beam specimens without shear reinforcement reported by 41 research groups. Furthermore, the accuracy of the proposed model was assessed through a comparative analysis with existing evaluation methods, encompassing machine learning-based models, empirical models, theoretical models, and design codes. The results indicate that the proposed model satisfactorily predicts the shear strength of FRP-RC beams within a wide range of design parameters. In comparison with machine learning-based models, the proposed theoretical model exhibits a similar level of accuracy in terms of the mean shear strength ratio and coefficient of determination (R2) values but with less scattering, indicated by lower coefficient of variation (COV) and root mean square error (RMSE) values. In addition, the proposed model outperforms existing empirical and theoretical models, as well as current design codes, by significantly enhancing prediction accuracy, demonstrated by lower COV, RMSE, and higher R2 values. Finally, a parametric study was conducted to investigate the effects of the key parameters on the shear strength of FRP-RC beams using both the proposed model and representative existing evaluation methods.

Shear behavior of circular concrete short columns reinforced with GFRP longitudinal bars and CFRP grid stirrups

Although fiber-reinforced polymer (FRP) reinforcements have become popular, the post-pultrusion bending leads to significant deficiency in bent portions of FRP hoops and spirals. This study adopts flexible carbon FRP (CFRP) grids as stirrups, and investigates the shear behavior of circular short columns reinforced with GFRP bars and CFRP grid stirrups. Six specimens with different shear reinforcement ratios, axial load ratios and types of stirrups (CFRP grids and steel hoops) were tested to shear failures. The failure modes, crack and strain developments, and shear load-horizontal displacement responses were presented for discussion. All specimens experienced shear-compression failures, and the critical diagonal crack widths increased approximately linearly with shear loads. The typical shear load-horizontal displacement curve consisted of three branches: a linear elastic branch, a cracking branch with progressive slope deteriorations, and an almost flat failure branch. Increasing CFRP grid stirrup ratio could not only enhance strength and ductility performance, but also alleviate the slope degradations, while increasing axial load ratios could enhance the initial cracking loads, restrain crack propagations, and reduce the lateral displacements. In terms of strength performance, steel hoops could be replaced by CFRP grid stirrups even with smaller stirrup ratio. Additionally, analytical investigations suggested that the effective stresses and strains of CFRP grid stirrups at failure may be lower than code limits.

Experimental study on shear performance of PET FRP-strengthened RC beams without stirrups

The shear behavior of simply supported RC beams strengthened with polyethylene terephthalate (PET) fiber-reinforced polymer (FRP) was studied in this paper. The test variables include strengthening schemes (i.e., U-wrapping and full-wrapping) and FRP reinforcement ratios. A comprehensive and meticulous investigation was conducted on the failure mode of RC beams, shear force-deflection curves, the development process of shear cracks, the evolution of FRP strain, and the interaction between FRP and concrete. The shear capacity and deformation were increased by 42.5% to 123.2% and -16.34% to 96.89% using the fully wrapped scheme, respectively. The improvement in shear capacity was 42.5% to 72.55% when the U-wrapped scheme was adopted. The PET FRP fully wrapped beams exhibited a type of ductile shear failure. The strain of PET FRP in the fully wrapped specimen exceeded 4% without fracture, ensuring the deformation capacity after the peak load. The shear deformation caused the increase in post-peak mid-span deflection. The U-wrapped specimens showed debonding failure, with the debonding strain of PET FRP being more than that of conventional FRP. Finally, six design guidelines for PET FRP shear contribution were evaluated for both U-wrapped and fully wrapped schemes.

Mechanical behaviour of TRM and FRP-reinforced concrete voussoir masonry specimens

This research investigates, both experimentally and analytically, the mechanical performance of masonry specimens made with special lightweight concrete voussoirs joined with cement mortar and reinforced with TRM (Textile Reinforced Mortar) made of either fibreglass mesh, TRM with basalt mesh or FRPs (Fiber Reinforced Polymers). The specimens represent a segment of an arch. A total of 18 specimens were tested, with one-third featuring each reinforcement solution. Another variable studied was the number of sides reinforced with TRM or FRP, either one or three. The specimens were tested under eccentric compression to analyze the effectiveness of the reinforcements. An analytical model was calibrated with the experimental results and used to extrapolate the experimental results in terms of strength capacity. The specimens that exhibited the best mechanical behaviours were those reinforced with TRM using basalt mesh. The FRP reinforcement experienced prematurely debonding with the voussoirs.

Punching Shear of FRP-RC Slab–Column Connections: A Comprehensive Database

Several design standards have been developed in the last two decades to estimate the punching capacity of two-way reinforced concrete (RC) slabs reinforced with fiber-reinforced polymer (FRP) reinforcement. FRP-RC design standards include the recently published ACI 440.11-22, CSA/S806-12, and JSCE-2007. These models are either based on empirical data or semi-empirical methods and calibrated using different databases. Additionally, these standards do not have provisions for connections with shear reinforcement. Therefore, a reliable worldwide database for developing and assessing the applicability of such provisions with test results is vital. This study presents a worldwide and up-to-date database for punching shear of FRP-RC slabs. The database includes 197 tested connections, comprising interior and edge connections, with and without shear reinforcement, and a wide range of materials and cross-sectional properties. The database was used to evaluate the accuracy of the mentioned standards in predicting the punching shear capacity. For connections without shear reinforcement, it was determined that the three design standards yielded similar performance with different conservatism levels. ACI 440.11-22 yielded the most conservative results, with average Vexp/Vpred ratios of 2.04 compared to 1.28 and 1.3 for other models. For connection with shear reinforcement, specimens with Evf> 100 GPa resulted in Vexp/Vpred ratios less than 1.0 for ACI and CSA standards.

Insight into the shear failure mechanism of Wound FRP reinforced concrete beams through numerical simulations considering interface damage and material anisotropy

Utilizing the inherent flexibility of high-strength fibres, Fibre-Reinforced Polymers (FRP) can be engineered as optimized reinforcing cages for concrete structures through the application of advanced digital fabrication techniques. However, existing codified design methods and numerical investigations found in the literature fall short in providing an accurate characterization of the actual performance of FRP reinforcement in concrete structures. This work presents a novel Finite Element (FE) modelling approach for concrete beams reinforced with FRP in non-traditional arrangements, accounting for reinforcement-concrete interface behaviour and FRP material anisotropy. Validation against experimental tests of flexible Wound-FRP (W-FRP) reinforced beams demonstrates accurate predictions of load-displacement curves, crack propagation, and load-strain curves. The study delves into shear failure mechanisms, emphasizing FRP reinforcement behaviour and damage evolution at reinforcement-concrete interfaces. Further parametric analysis explores the impact of W-FRP inclination angle and spacing, revealing their significant influence on beam stiffness and ultimate capacity. Specifically, the horizontal tensile force component in inclined links and increased modulus of links with reduced spacing enhance stiffness. Altered crack propagation due to W-FRP patterns, coupled with resulting damage development at concrete-stirrup interfaces and stress evolution in W-FRP stirrups, are key contributors to varied ultimate capacity. Moreover, higher performance of W-FRP stirrups with smaller spacing and reduced cross-section area further bolsters ultimate capacity. This research advances the modelling of FRP-reinforced concrete, offering potential solutions for optimizing FRP material utilization in concrete structures.

Flexural performance of reinforced concrete beams strengthened using near-surface-mounted carbon-fiber-reinforced polymer bars: Effects of bonding patterns

The near-surface-mounted (NSM) fiber-reinforced polymer (FRP) technique is effective for enhancing the load carrying capacity of strengthened reinforced concrete (RC) beams. However, this technique significantly reduces the deformability of strengthened RC beams. To overcome this, the present study combines the NSM strengthening method with the partial bonding technique: the strengthening FRP reinforcement is partially bonded onto the concrete substrate). Six full-scale 4.3 m long RC beams strengthened with NSM FRPs using various bonding patterns were tested. The results indicated that mechanical interlocking grooves slightly improve the load carrying capacity, but have a negligible effect on the deformability of the strengthened beams. A decrease in the bond length increased deformability by 27.2 %, with only a 7.6 % drop in load capacity compared to that of the beam with full bonding. An advanced finite element model was developed and validated to confirm an optimal bond length of 930 mm for maximum flexural performance.

Flexural behavior of concrete beams hybrid-reinforced with glass fiber-reinforced polymer, carbon fiber-reinforced polymer, and steel rebars

The utilization of fiber-reinforced polymer (FRP) reinforcements in structural design is increasing due to their non-corrosive nature. However, the anisotropic features and linear elastic behavior of FRP rebars have led researchers to explore the use of hybrid combinations of FRP and steel reinforcements. Current codes and guidelines predominantly focus on the design of glass FRP (GFRP) reinforced structural elements, leaving a gap in incorporating the hybrid use of FRP-steel combinations and different types of FRP materials, such as carbon FRP (CFRP). This study conducted experimental investigations on concrete beams reinforced with GFRP, CFRP, and hybrid (GFRP-steel and CFRP-steel in combination) rebars, comparing the results with theoretical models. Ten full-scale beams were tested under monotonic loading. Test results revealed that existing codes overestimate GFRP reinforced beam displacements while underestimating CFRP reinforced beam displacements. A reduction factor is proposed for the effective moment of inertia expression given by ACI 440.11-22 to predict the deflections of CFRP reinforced and hybrid reinforced beams. The experimental data for CFRP and hybrid reinforced concrete beams align well with the predictions calculated using the proposed equations.

Machine learning-based evaluation of punching shear resistance for steel/FRP-RC slabs

With the emergence of fiber-reinforced polymer (FRP) reinforcement as a substitute for conventional steel reinforcement, different design codes have been developed to account for the different mechanical properties of the FRP, specifically the elastic modulus. The ACI 440.11-22, CSA/S806-12, and JSCE-97 are well-known standards for FRP-reinforced concrete structures. In particular, these design standards show significant variations in estimating the punching shear resistance and accounting for the elastic modulus. This study provides a statistical and machine learning-based evaluation of the punching shear models in design standards. An Artificial neural network (ANN) framework is used to develop a generalized punching resistance model of flat slabs reinforced with steel and FRP bars utilizing a large experimental dataset with 539 tests. The study presents a parametric study to examine the effect of different factors on the punching shear strength. The parametric study provided a graphical presentation and comparison between the design models and the developed ANN model.

Structural Behaviour of FRP-Reinforced Tubular T-Joint Subjected to Combined In-Plane Bending and Axial Load

In this study, 90 finite-element models are used to explore the behaviour of fibre-reinforced polymer (FRP) reinforced joints under combined in-plane bending (IPB) and axial load (AX). The effects of joint geometry, FRP layer count, and AX levels of the chord or brace are considered. Three typical failure modes are observed: chord plastic failure, brace plastic failure, and brace buckling failure. Increasing the number of FRP layers can ensure that failure is chord-related failure in a ductility manner rather than the unexpectedly brace-related brittle failure. Depending on the stress distribution of fibres, FRP reinforcement can restrict the deformation of joints subjected to complex loading patterns. Moreover, added FRP layers efficiently reduce the effect of brace AX on the IPB resistance. Finally, a modified strength equation is established, including the influence of FRP reinforcement, chord AX, and brace AX.

Study on the Bonding Performance of BFRP Bars with Seawater Sand Concrete.

A total of 66 sets of pullout specimens were prepared to investigate the bonding properties of basalt fiber-reinforced polymer reinforcement (hereinafter referred to as BFRP) with seawater sand concrete (hereinafter referred to as SSC). The volume dosages of mono-doped glass fibers and mono-doped polypropylene fibers were 0.1%, 0.2%, and 0.3%; the total volume dosage was set to be constant at 0.3%; and the doping ratios of the hybrid fibers were 1:2, 1:1, and 2:1. The effect on the bonding performance of BFRP reinforcement with SSC was studied on the condition of the diameter D of the BFRP reinforcement being 12 mm; the bond length of SSC being 3D, 5D, and 7D; and the surface characteristics of the reinforcement being sandblasted and threaded. The research showed that due to internal cracks in the matrix, salt crystals in the pores, chloride salts with high brittleness and expansion, as well as sulfate corrosion products such as "Frederick salts" in SSC, the concrete became brittle, resulting in more brittle splitting failures during the pullout test. Doped fibers can increase the ductility effect of concrete, but the bonding effect between the threaded fiber reinforcement and the SSC was not as good as that of the sandblasting group. When the bond length was 5D, the bonding effect between the BFRP reinforcement and SSC was the best, and the bonding performance of the experimental group with doped fibers was better than that of the threaded group. Finally, by combining the ascending segment of the Malvar model with the descending segment of the improved BPE model, a constitutive relationship model suitable for the bond-slip curve between BFRP reinforcement and SSC was fitted, which laid a theoretical foundation for future research on SSC.

Effects of eccentric loading on performance of concrete columns reinforced with glass fiber-reinforced polymer bars.

Glass fiber-reinforced polymer (GFRP) reinforcements are superior to traditional steel bars in concrete structures, particularly in vertical elements like columns, and offer significant advantages over conventional steel bars when subjected to axial and eccentric loadings. However, there is limited experimental and numerical research on the behavior of GFRP-reinforced concrete (RC) columns under eccentric loading having different spacing of stirrups. In this study, six specimens were cast under three different values of eccentricities (25mm, 50mm, and 75mm) with two groups of stirrups spacing (50mm and 100mm). The experimental results showed that by increasing the eccentricity value, there was a reduction in the load-carrying capacityof the specimens. The finite element ABAQUS software was used forthe numerical investigation of this study.The results from the finite element analysis (FEA) were close to the experimental results and within the acceptable range. The maximum difference between theexperimental and FEA resultswas 3.61% for the axial load and 12.06% for the deformation.

Experimental and statistical investigations of the material properties of FRP reinforcement in compression

Internationally leading standards currently do not permit to consider the contribution of reinforcement made of fibre reinforced polymers (FRP) to a concrete member’s compressive load-bearing capacity due to a lack of reliable knowledge regarding FRP’s material properties in compression. Thus, there is a very high demand for carefully specifying an optimised test setup for FRP bar reinforcement that accounts for both theoretical considerations and established standards from other industry branches. This paper presents an extensive literature review on mechanical approaches to describe FRP material properties in compression, existing test setups from various industry branches as well as experimental studies that have been conducted in order to research the compressive material properties of FRP reinforcement. Based on experimental results from literature a database was compiled. Following a reasonable choice of a test setup based on the literature study, an experimental campaign was setup, in order to investigate the influence of different fibre materials (carbon, glass, basalt), polymer matrices and bar diameters on the compressive material properties of FRP reinforcement bars. In addition to the experimental determination of the material properties, the joint evaluation of the total sample size of n = 95 own experimental test results and the results from the database generated from literature allows for statistical investigations. Thus, the determination of material scatter and the estimation of the distribution type by means of a statistical analysis applying the Kolmogorov-Smirnov test provides the basis for further research towards the reliability of concrete structures reinforced with FRP bars in compression.

Study on damage characteristics and application of gypsum pillar strengthened with FRP

The instability of mine pillars has posed a serious threat to the safety of mines in China. In order to reduce the risk of pillar instability, this study used fiber-reinforced polymer (FRP) to reinforce gypsum specimens and conduct mechanical loading experiments. The study investigates the reinforcement effect of gypsum specimens with different height-diameter ratios and different FRP wrapping thicknesses, and analyzed the uneven distribution of constraint force along the height direction of FRP-reinforced gypsum specimens. An optimized wrapping method was proposed, and a stress–strain constitutive model for gypsum materials under optimized wrapping was established. By utilizing a statistical method based on strain energy density for heterogeneous rock damage identification, a simulation study was conducted on FRP-reinforced gypsum-like specimens. A comparative analysis was carried out with experimental results to verify the feasibility of the constitutive model. The research findings indicate that the use of FRP reinforcement significantly improves the uniaxial compressive strength and strain values of gypsum-like specimens. Moreover, the smaller the aspect ratio, the more pronounced the effect of FRP reinforcement on gypsum-like specimens. The stress–strain curve of FRP-reinforced gypsum-like specimens shows a distinct combination of curves and straight lines, which can be divided into two distinct stages based on different elastic moduli. The peak value of acoustic emission energy of FRP-reinforced gypsum specimens appears at the junction of the first and second stages of the stress–strain curve, and then the acoustic emission energy curve becomes relatively flat, with an increase in peak energy before failure. The constraint force acting on FRP-reinforced gypsum specimens exhibits an obvious uneven distribution along the height direction, based on which an optimized reinforcement scheme is proposed. Based on the established constitutive model, numerical simulation was conducted using real data from a specific mine. The research findings demonstrate that when the optimized reinforcement method is employed, the load-bearing capacity of the mine pillars was significantly enhanced. The maximum displacement was reduced by 33%, the maximum vertical stress was reduced by 3.2%, and the volume of the plastic zone was reduced by 39.87%.

Ultra-High-Strength Engineered Cementitious Composites (UHS-ECC) panel reinforced with FRP bar/grid: Development and flexural performance

In this study, Ultra-High-Strength Engineered Cementitious Composites (UHS-ECC) panels with Fiber-Reinforced Polymer (FRP) reinforcement (i.e., FRP bars and girds) were proposed for the construction of sustainable marine structures. Based on four-pointed bending tests, the mechanical performance of FRP-reinforced UHS-ECC [with 2% polyethylene (PE) fibers] and FRP-reinforced ultra-high-strength concrete (UHSC, without fibers) panels were investigated and compared to understand the composite action between UHS-ECC and FRP. Compared with the FRP-reinforced UHSC panel, the FRP-reinforced UHS-ECC panel showed significantly higher ultimate load (139-173% higher), stiffness, and deformation capacity. It was also found that the use of seawater as the raw material had almost no effect on the mechanical performance of FRP-reinforced UHS-ECC (UHSC) panels. An analytical investigation was conducted to predict the load capacities of the tested panels, and the prediction error was acceptable. For FRP-reinforced UHS-ECC (UHSC) panels, it was revealed that using UHS-ECC to replace UHSC improved the stress transfer and deformation compatibility with FRP because the multiple cracking behavior of UHS-ECC lowered the crack-induced shear stress concentration along the FRP reinforcement. The developed FRP-reinforced UHS-ECC system showed great potential in the construction of durable and sustainable marine infrastructure.

Applicability of available NDT methods for damage detection in concrete elements reinforced or strengthened with FRP

The application of Fiber Reinforced Polymer (FRP) materials in concrete structures has been rising due to their several advantages, including lightweight, high tensile strength, ease of installation, and corrosion resistance. They have been mostly implemented for strengthening and repairing existing structures in the form of an externally bonded system, i.e., sheet, jacket, near surface mounted. Furthermore, they have been recently utilized as internal reinforcement of concrete elements in the form of strands, bars, tendons, etc. Although higher durability and performance are associated with the FRP material in some aspects compared to steel, concerns remain regarding damages and defects in this material, many of which are related to their unique features. Importantly, debonding of FRP materials from a concrete surface or within a concrete element has always been an issue resulting in the premature failure of the structure. To this end, concrete elements strengthened or reinforced with FRP materials has to be inspected periodically to detect potential issues and hence prevent any premature failures. This study first determines all possible or potential damages and anomalies attributed to FRP reinforced/strengthened concrete (FRP-RSC) elements. It then investigates Non-Destructive Testing (NDT) methods that can be applicable to the inspection of FRP-RSC elements from a literature survey of past studies, applications, and research projects. Furthermore, this study evaluates the ability of two of the most commonly used NDT methods, Ground Penetrating Radar (GPR) and Phased Array Ultrasonic (PAU), in detecting FRP bars/strands embedded in concrete elements. GPR and PAU tests were performed on two slab specimens reinforced with GFRP (Glass-FRP) bars, the most commonly used FRP bar, with variations in their depth, size and configuration, and a slab specimen with different types of available FRP reinforcements. The results of this study propose the most applicable methods for detecting FRP and their damage/defects in FRP-RSC elements. This study further investigates the feasibility of two new methods for improving the detectability of embedded FRP bars. By providing the inspection community with more clarity in the application of NDT to FRP, this study offers means for verifying the performance and, therefore, help the proliferation of FRP materials in concrete structures.

Numerical Analysis of an Innovative Double-Strap Joint for the Splicing of Near-Surface Mounted Fiber-Reinforced Polymer Bars for Reinforced Concrete Beam Strengthening

The issue of the cut-off splicing of an additional fiber-reinforced polymer (FRP) bar in the near-surface mounted (NSM) technique for reinforced concrete (RC) beam strengthening exposed dominantly to bending is insufficiently investigated. A possible solution of this issue is a new proposed technique: a double-strap joint. It implies the widening of the groove at the cut-off location and the symmetrical installing of additional supplements of FRP reinforcement. In this research, beam strength has been determined for the following cases: additional NSM FRP reinforcement without a cut-off, with a cut-off, and without overlapping, and with different lengths of splice overlapping. A nonlinear analysis based on the finite element method (FEM) has been applied. The length of the cut-off splice of the additional FRP reinforcement with glass fibers (GFRP) was 20Ø, 40Ø, and 60Ø. The validation of the numerical model and a comparison of the results were conducted by using the authors’ experiments. It has been shown that, in the case of a cut-off of NSM GFRP bars, a significant loss in strengthening efficiency occurs, and that, with an increase in the overlapping length, this loss decreases. An overlapping length of 60Ø provides full strengthening. An efficiency assessment was carried out via the use of a parametric study, varying the FRP bar material type and its diameter for a constant splicing length.

Analysis of the transfer, flexural bond and anchorage lengths of pretensioned FRP reinforcement based on Eurocode

Current design codes in North America have guidelines for assessing the anchorage zone of pretensioned fiber reinforced polymer (FRP) reinforcement. However, there is no comparison of the Eurocode approach with experimental data or suggestions for its application for prestressed FRP reinforcement. Therefore, the main objective of this article is to provide a comparison of available data in the literature on the transfer, flexural bond, and anchorage length of different types of FRP reinforcement with Eurocode and to provide insight on the adaptation of this code. The database of more than 300 and 100 specimens with the results of the transfer and flexural bond lengths is used, respectively. This database is used to derive and propose the parameters that describe the type and surface of pretensioned FRP reinforcement based on the Eurocode approach. Furthermore, the influence of shear reinforcement and the type of pretensioned reinforcement release (gradual and sudden) is taken into account. The Eurocode approach with the coefficients proposed for different FRP reinforcements on average gave the best prediction of the experimental transfer, flexural bond, and anchorage length results compared to the North American design codes for FRP reinforcement and the Eurocode for steel strands.

Effect of temperature on epoxy resin deterioration for fibre-reinforced polymer reinforcement in simulated concrete pore solutions

Fibre-reinforced polymer (FRP) tendons have excellent mechanical properties and corrosion resistance and are widely used in concrete structures; however, corrosion deterioration of FRP tendons is a serious problem in a highly alkaline concrete environment owing to the hygrothermal ageing effect of the resin. Accordingly, this study investigated the macro and micro properties evolution of epoxy resin in a simulated concrete pore solution at different temperatures. The results showed that the resin properties deteriorated significantly under long-term hygrothermal immersion. However, short-term high-temperature soaking caused some of the resin to undergo post-curing, improving its properties.

Influence of seawater and sea sand on early-age performance and cracking sensitivity of concrete

Due to resource constraints, there has been a growing demand for alternative sources of water and sand in construction engineering. Recent advancements in technology, such as the use of fiber-reinforced polymers (FRP) reinforcement or impressed current cathodic protection-structural strengthening (ICCP-SS), have enabled the utilization of seawater and sea sand, garnering significant research attention. The study investigated various aspects of four types of early-age concrete based on the temperature stress testing machine (TSTM) method, including fresh properties, basic mechanical properties, hydration temperature history, restraint stress, autogenous shrinkage, creep, and cracking sensitivity. The results showed that seawater significantly increased the early tensile strength of concrete, while sea sand had the opposite effect. Compared with ordinary concrete, seawater and sea sand increased the early autogenous shrinkage of concrete, and the impact of seawater was more significant. For the early creep of concrete, seawater and sea sand reduced the maximum compressive creep of concrete, and the effect of sea sand was more remarkable. Seawater increased the tensile creep of concrete, while sea sand decreased the tensile creep of concrete. The comprehensive evaluation index indicates that seawater and sea sand have no significant effect on concrete's cracking sensitivity. This research may serve as a valuable reference for the use of seawater and sea sand in concrete.