Excellent Mechanical Properties Research Articles

Personalized Piezoresistive Anti‐Scar Orthosis with Precise Pressure Monitoring Function Based on Embedded 3D Printing

AbstractHyperplastic scars, especially keloids, have posed a significant clinical challenge due to their high recurrence rate. Compression therapy, a cost‐effective treatment, has demonstrated efficacy in reducing scarring and preventing recurrence. However, the compression methods exhibit limitations in adapting to the complex contours and accurately adjusting the treatment pressure, resulting in unsatisfactory treatment effects. In this study, silicone is chosen as the substrate layer ink, while the conductive ink is developed by incorporating nano‐carbon black into the polymer composite. These are printed alternately within the supported gels to construct an integrated orthotic device with precise pressure control capabilities and complex structures. Results demonstrated the printed orthosis displayed excellent mechanical properties, durability and biocompatibility. It can successfully detect various stress changes with short response times. The utilization of finite element analysis aided in the design of personalized orthosis to achieve optimal pressure for scar treatment. Finally, orthosis‐mediated pressure treatment is performed on rat tail scar models. By monitoring resistance value, it can be inferred whether the treatment pressure applied by orthosis fell within an optimal range. Overall, personalized piezoresistive anti‐scar orthoses offer an accurate and effective treatment method for scar. This innovative approach presents a novel strategy in the realm of personalized scar management.

Robust Superhydrophobic Films Based on an Eco-Friendly Poly(l-lactic acid)/Cellulose Composite with Controllable Water Adhesion.

Poly(l-lactic acid) (PLLA) featuring desirable biodegradability and biocompatibility has been recognized as one of the promising eco-friendly biomaterials. However, low crystallization and poor mechanical and chemical performances dramatically hamper its practical application. In this work, we report that functionalized cellulose/PLLA composite superhydrophobic stereocomplex films with controllable water adhesion and protein adsorption can be fabricated by a facile approach for the first time. First, cellulose is surface-modified by means of two silanization modification methods. Then, superhydrophobic cellulose/PLLA composite films are prepared through a solvent-evaporation-induced phase separation method. The two cellulose/PLLA composite films exhibit extreme water repellency but tunable water adhesion from sticky to slippery. The protein adsorption capacity of the cellulose/PLLA composite films can also be regulated. In addition, the stereocomplexation of the composite film provides excellent mechanical properties with an elongation at break of 22.36%, which is 237.8% higher than that of a pure PLLA film, which is more suitable for biomaterials. Furthermore, good biodegradability of the PLLA composite films in nature enables the bio-based composites as alternative materials to replace conventional petroleum-based polymers. The superhydrophobic films have also been demonstrated for many applications, including slippery surfaces, liquid transportation without loss, and antifouling.

Microstructure and properties of 316 L lattice/Al composites by additive manufacturing and infiltration with different temperature

Interface between lattice reinforcement and matrix played a key factor on properties of the lattice reinforced aluminum matrix composites. However, the effect of interface composed of intermetallic compounds on the properties of 316 L lattice/Al composites was still unclear. In this study, 316 L lattice reinforced aluminum composite with continuous interface were prepared by combining laser powder bed fusion (LPBF) and vacuum infiltration, and effect of infiltration temperature on interface evolution and properties of the composite was investigated. Results indicated that a continuous dual-phase interfacial layer consisting of hard intermetallic compounds η-Fe2Al5 and θ-FeAl3 was formed between the reinforcement and matrix due to diffusion and reaction of iron and aluminum atoms, and the size of needle-type FeAl3 phase in the interfacial zone increased when infiltration temperature was up from 800 °C to 900 °C. It also confirmed that reinforced by 316 L lattice and hard intermetallic compounds layer, the composite showed excellent mechanical and wear resistant properties, with compressive strength of 657 ± 32 MPa and specific wear rate of 0.20 × 10−3 (mm3/N·m) for the sample prepared at 800 °C, which were over 10 times and one fifth of that of the aluminum matrix individually. This study provides a new strategy for developing 316 L lattice/Al composites with excellent properties.

Building Flame-Retardant Polymer Electrolytes via Microcapsule Technology for Stable Lithium Batteries.

Flame retardants could improve the safety properties of lithium batteries (LBs) with the sacrifice of electrochemical performance due to parasitic reactions. To concur with this, we designed thermal-response clothes for hexachlorophosphazene (HCP) additives by the microcapsule technique with urea-formaldehyde (UF) resin as the shell. HCP@UF combines with polyacrylonitrile (PAN) by hydrogen bonds successfully to form PAN-HCP@UF as the flame-retardant solid polymer electrolyte. The hydrogen bonds ensure excellent mechanical properties of the polymer electrolyte. The multiscale free radical-annihilating agent HCP effectively eliminates hydrogen free radicals of electrolytes under high temperature, showing excellent flame retardation. During the operation of the battery, functional groups on the UF resin act as active sites to promote the migration of lithium ions, while the internal HCP is protected from electrochemical reaction. With 25% HCP@UF addition, the limiting oxygen index of the PAN-HCP@UF increases to 28% and the Li+ transfer number up to 0.80. By UF protection, the initial capacity retention rate of the Li||LFP battery that assembles with PAN-HCP@UF is 88.8% after 500 cycles at 0.5 C. Thus, the microcapsule-encapsulated approach is deemed to provide an innovative strategy to prepare high-safety solid-state LB with a stable long cycle life.

Wearable Vertical Graphene-Based Microneedle Biosensor for Real-Time Ketogenic Diet Management.

Ketogenic diets have attracted substantial interest in the treatment of chronic diseases, but there are health risks with long-term regimes. Despite the advancements in diagnostic and therapeutic methods in modern medicine, there is a huge gap in personalized health management of this dietary strategy. Hence, we present a wearable microneedle biosensor for real-time ketone and glucose monitoring. The microneedle array possesses excellent mechanical properties, allowing for consistent sampling of interstitial biomarkers while reducing the pain associated with skin puncture. Vertical graphene with outstanding electrical conductivity provides the resulting sensor with a high sensitivity of 234.18 μA mM-1 cm-2 and a low limit detection of 1.21 μM. When this fully integrated biosensor was used in human volunteers, it displayed an attractive analytical capability for tracking the dynamic metabolite levels. Moreover, the results of the on-body evaluation established a significant correlation with commercial blood measurements. Overall, this cost-effective and efficient sensing platform can accelerate the application of a ketogenic diet in personal nutrition and wellness management.

Enhancing the Mechanical Properties and Water Permeability of Pervious Planting Concrete: A Study on Additives and Plant Growth.

Pervious planting concrete (PPC) is in line with the concept of ecological environmental protection. However, due to its own porous structure, it is difficult to obtain excellent mechanical properties and water permeability at the same time, which hinders its promotion and application. In this paper, natural gravel (NG), ordinary Portland cement (OPC), polyvinyl alcohol latex powder (PVAP) and polycarboxylate superplasticizer (PS) were used to prepare the PPC, and its mechanical properties and water permeability were studied. Three kinds of plants were planted in the PPC and their planting properties were studied. At the same time, the effect of Bacillus on the planting properties was studied. The results show that when the water-binder ratio (W/B) was 0.28 and the PVAP content was 0.8%, both the mechanical properties and water permeability of the PPC were optimal. The compressive strength and permeability coefficient were 14.2 MPa and 14.48 mm/s, respectively. The mechanical properties and water permeability of PPC prepared with 10~20 mm NG were better than those prepared with 5~10 mm NG. Among the three plants, the germination rate and growth of Elymus dahuricus Turcz (EDT) were the best. The incorporation of Bacillus can optimize its planting properties and promote the effective combination between plants and the PPC substrate.

Simultaneous improvement of mechanical and castability properties of Al-Cu-Mn based alloys by Ca/Ni micro-alloying

Currently one major barrier for the design of cast high-strength and high-toughness Al alloys is hot tearing. In this work, a strategy of combination of squeeze casting and microalloying (Ca/Ni eutectic elements) in Al-Cu-Mn based alloys was employed to inherit the excellent mechanical properties of Al-Cu alloys whilst simultaneously reducing their tendency to hot tearing. The developed alloys exhibit comparable castability (fluidity and hot tear resistance) to A356, which is widely available commercially. However, their comprehensive mechanical properties far exceed those of A356. Trace Ca/Ni additions markedly reduce the grain size of the alloy and simultaneously increase the fraction of intergranular low melting point eutectic liquid phases, which is beneficial to the improvement of liquid feeding. The fine equiaxed grains have excellent thermal shrinkage coordination, while the high volume fraction eutectic liquid phase delays the development of grain cohesive skeleton. Accordingly, the localized shrinkage stress/strain at the hot spot is released timely, thus inhibiting the emergence and propagation of hot cracks in the brittle solidification interval. The diminished hot tearing susceptibility is attributed to the reduced load onset temperature and load values in the hot spot region. A new intergranular bridging mechanism is discovered in low-Ca alloys: based on compositional segregation-induced nucleation of an intergranular bridging skeleton, which strengthens the intergranular adhesive force and effectively reduces the hot tearing tendency of the alloys. The alloys with high-Ca/Ni additions, however, reduce the hot tearing tendency by healing cracks through eutectic liquid phase backfill. The results of the hot tearing experiments of the developed alloys are analyzed with the current hot tearing evaluation criteria. The results demonstrate that the predictions of the Kou's criterion provide guidelines for the design of alloys that are resistant to hot tearing.

A novel low-cost medium entropy alloys with excellent mechanical properties via multiple strengthening mechanisms

The microstructure and tensile mechanical properties of novel FeNiCrAlxTiy medium-entropy alloys (MEAs) were investigated. The results showed that the microstructure of the MEAs undergoes a transformation from FCC single-phase to FCC + BCC dual-phase with increasing Ti and Al content. The addition of Ti and Al significantly increases the strength while maintaining appropriate ductility. Specifically, the (FeNiCr)94Ti2Al4 exhibits excellent combinations of yield strength (∼1.2 GPa and ∼1.5 GPa) and tensile ductility (13 % and 19 %) at both 298 K and 77 K. Microstructural analysis reveals that the excellent cryogenic mechanical properties are attributed to the co-existing multiple strengthening mechanisms. This work provides a simple route for designing low-cost MEAs with excellent cryogenic tensile properties.

Achieving hardness‐strength‐toughness synergy in (Ti, W, Mo, Cr)(C, N)‐based cermets

AbstractTi(C, N)‐based cermets have been considered to be the most potential candidates for WC‐Co cemented carbides as tool material due to their various advantages. However, the trade‐off between hardness/strength and toughness limits their further application. Herein, we present new (Ti, W, Mo, Cr)(C, N)‐based cermets showing superior mechanical properties with hardness of 1525 MPa, transverse rupture strength of 2428 MPa, and fracture toughness of 11.44 MPa·m1/2 by compositional and interfacial modification. The strengthening and toughening mechanisms were revealed by experimental observation and theory calculation. It could be clarified that the high elastic modulus caused by a polar covalent bond in the hard phase and solid solution strengthening of the binder phase attributed to the hardness. The strong interface bonding between the core/rim, inner/outer rim, and rim/binder phases stemming from the composition optimization contributed to super crack resistance. Intergranular fracture in submicron‐scaled hard phases led to the crack deflection, transgranular fracture in the micron‐scaled hard phases consumed more energy due to their high intrinsic hardness and excellent interface coordination. The synergy of multi‐scaled hard particles brought about excellent comprehensive mechanical properties.

Fabrication of high-entropy alloy superconducting wires by powder-in-tube method

High-entropy alloys (HEAs) are novel functional materials that exhibit excellent mechanical and chemical properties. Recent discovery of self-healing superconductivity of HEAs under ion irradiation suggests their great potential applications under extreme conditions such as in nuclear fusion reactors or space environments. Here, we report a fabrication of the HEA superconducting (SC) wires using the ex-situ powder-in-tube (PIT) technique for the first time, a crucial stepping stone to achieve various industrial and technological applications. The Ta1/6Nb2/6Hf1/6Zr1/6Ti1/6 HEA SC powder prepared by planetary ball milling was filled into Fe tubes, drawn into wires, and then sintered in evacuated quartz tubes at various temperatures. The HEA SC wire sintered at 700 °C for 1 h exhibits the highest critical current density (Jc) among the HEA SC wires sintered in the temperature range of 600 – 1000 °C. At 4.2 K, the Jc of this wire exceeds the common benchmark value of Jc = 100 kA cm−2, indicating the suitability of the HEA wire for large-scale applications, such as in high-field SC magnets. The SC transition temperature (Tc) of the HEA wire significantly increases from 5.10 K for the as-cast wire to 7.58 K with the sintering time (ts) of 30 min at 700 °C. The scaling of the flux pinning force as a function of the magnetic field indicates that normal point pinning plays a major role in achieving a high in-field Jc in HEA SC wires. These results underscore the significant potential of HEA superconductors for practical applications in high-field SC magnets, SC electric machines, and next-generation nuclear fusion reactors.

Laser-Printed Photoanode: Femtosecond Laser-Induced Crystalline Phase Transformation of WO3 Nanorods for Space-Efficient and Flexible Thin-Film Solar Water-Splitting Cells.

Despite its potential for clean hydrogen harvesting, photoelectrochemical (PEC) water-splitting cells face challenges in commercialization, particularly related its harvesting performance and productivity at an industrial scale. Herein, a facile fabrication method of flexible thin-film photoanode for PEC water-splitting to overcome these limitations, based on laser processing technologies, is proposed. Laser-induced graphene, a carbon structure produced through direct laser writing carbonization (DLWC), plays a dual role: a flexible and stable current collector and a substrate for the hydrothermal synthesis of tungsten trioxide (WO3) nanorods (NRs). To facilitate water-splitting, a femtosecond-pulsed laser (fs laser) is focused on the WO3 NRs, converting their crystalline phase from pristine orthorhombic to monoclinic structure without thermal damage. With NiFe layered double hydroxide (LDH) catalyst, the flexible thin-film photoanode exhibits good PEC performance (1.46mAcm-2 at 1.23 VRHE) and retains ≈90% of its performance after 3000 bending cycles. With its excellent mechanical properties, the flexible photoanode can be operated in various shapes with different curvatures, enabling space-efficient PEC water-splitting by loading larger photoanode within a given space. This study is expected to contribute to the advancement of large-scale solar water-splitting cells, introducing a new approach to enhance H2/O2 production and expand its application range.

High versatility of polyethylene terephthalate (PET) waste for the development of batteries, biosensing and gas sensing devices

Continuously growing adoption of electronic devices in energy storage, human health and environmental monitoring systems increases demand for cost-effective, lightweight, comfortable, and highly efficient functional structures. In this regard, the recycling and reuse of polyethylene terephthalate (PET) waste in the aforementioned fields due to its excellent mechanical properties and chemical resistance is an effective solution to reduce plastic waste. Herein, we review recent advances in synthesis procedures and research studies on the integration of PET into energy storage (Li-ion batteries) and the detection of gaseous and biological species. The operating principles of such systems are described and the role of recycled PET for various types of architectures is discussed. Modifying the composition, crystallinity, surface porosity, and polar surface functional groups of PET are important factors for tuning its features as the active or substrate material in biological and gas sensors. The findings indicate that conceptually new pathways to the study are opened up for the effective application of recycled PET in the design of Li-ion batteries, as well as biochemical and catalytic detection systems. The current challenges in these fields are also presented with perspectives on the opportunities that may enable a circular economy in PET use.

Scalable Synthesis of SiOx-TiON Composite As an Ultrastable Anode for Li-Ion Half/Full Batteries.

Among various anode materials, SiOx is regarded as the next generation of promising anode due to its advantages of high theoretical capacity with 2680 mA h g-1, low lithium voltage platform, and rich natural resources. However, the pure SiOx-based materials have slow lithium storage kinetics attributed to their low electron/ion conductive properties and the large volume change during lithiation/delithiation, restricting their practical application. Optimizing the SiOx material structures and the fabricating methods to mitigate these fatal defects and adapt to the market demand for energy density is critical. Hence, SiOx material with TiO1-xNx phase modification has been prepared by simple, low-cost, and scalable ball milling and then combined with nitridation. Consequently, based on the TiO1-xNx modified layer, which boosts high ionic/electronic conductivity, chemical stability, and excellent mechanical properties, the SiOx@TON-10 electrode shows highly stable lithium-ion storage performance for lithium-ion half/full batteries due to a stable solid-electrolyte interface layer, fast Li+ transport channel, and alleviative volumetric expansion, further verifying its practical feasibility and universal applicability.

Fabrication of multifunction polyurethane with robust, self-healing and anti-corrosion performance based multiple dynamic bonds strategy

Polyurethanes (PUs) containing multiple dynamically have been extensively studied, however combining their mechanical, self-healing and anti-corrosion ability remains a significant challenge. Therefore, this paper successfully prepared PU coating (PU-SS-Salen-Ni) by introducing Ni2+ coordinated Salen and bis(4-hydroxyphenyl) disulfide chain extenders. PU-SS-Salen-Ni with quadruple dynamic bonding exhibited excellent tensile strength (15.4 MPa), toughness (72 MJ·m−3) and superior self-healing efficiency (86.8 %) after being held at 80 °C for 4 h. Meantime, the |Z|f=0.01Hz of PU-SS-Salen-Ni coating reached at 9.35 × 106 Ω·cm2 at the beginning of immersion, and even maintained at 6.99 × 106 Ω·cm2 after 28 days immersion due to the synergistic effect of multiple dynamic bonds. This study provides insight into the design of PU elastomers with sustainable self-healing, excellent mechanical properties and corrosion protection.

Investigation of hybrid ultrasonic machining process of Nomex honeycomb composite using a toothed disc cutter

Nomex honeycomb composite (NHC) has been increasingly used in the automotive, aerospace and defence applications due to its excellent thermal and mechanical properties. Its complex cellular hexagonal thin-walled configuration along with heterogeneous, soft and brittle nature pose substantial processing defects such as burr formation, tearing of walls, surface roughness, dimensional inaccuracy and low machining quality during conventional machining (CM). These surface defects have a substantial influence on the operating life and functional performance of its sandwiched structural members. Hybrid ultrasonic vibration assisted machining (HUSVAM) technology has been introduced to overcome such limitations. For an in depth research on HUSVAM of NHC using ultrasonic toothed disc cutter (UTDC), three dimensional finite element model was developed and experimental validation was carried out. The numerical simulation and experimental results were found to be in good agreement with one another. The influence of various machining parameters including the ultrasonic tool vibration amplitude (UTVA), feed rate (FR), depth of cut (DoC) and spindle angular speed (SAS) on NHC cutting forces, chip formation and surface quality was investigated using both HUSVAM and CM techniques. Furthermore, stresses, deformation and forces near tool-workpiece interaction along with the surface topography and morphologies were also analysed and compared for various operating conditions. A reduction in the cutting forces was found with the increase of SAS and UTVA (up to 65.47 % and 65.74 %, respectively). Although, the cutting forces were observed to increase by increasing the DoC and FR (up to 159.45 % and 126.33 %, respectively). DoC has a greater impact on the cutting forces among all machining parameters according to 4 levels, 4 factors (L16) orthogonal experiments based on Taguchi method. The results show that the chip formation and machining quality of NHC core can be improved with HUSVAM technique using UTDC. HUSVAM also reduced the cutting forces (up to 73 %) compared to CM. The ultrasonic toothed disc cutter generated large number of burr with very short length, no tearing defects and no uncut fibers as observed from scanning electron microscopy of NHC hexagonal cell structure, walls and triple points. A burr formation of less than 10 % was realized during HUSVAM of NHC cores for Fx≤3N, while it was found up to 20 % if Fx>3N, compared to at least 40 % during CM. The finite element model developed can be used to investigate the influence of HUSVAM on modern difficult to machine materials for enhanced surface quality.

Mechanical and shape memory properties of Eucommia ulmoides gum-based elastic fibers with various architectures

Eucommia ulmoides gum (EUG) is composed of trans-1,4-polyisoprene with high flexibility and crystallinity, and could be utilized as elastic and thermoplastic materials. Taking advantage of the unique crystallization characteristics, a series of EUG-based complex elastic fibers were prepared by wet-spinning method using different types of needles. It was found that the EUG fiber displayed excellent mechanical properties including high tensile strength (42.8 MPa), elongation at break (572%), and toughness (136.8 MJ m−3). The complex elastic fibers combining different compositions and various architectures have higher temperature sensitivity and excellent shape memory recovery ability compared to EUG elastomer. Meanwhile, the elastic fibers containing EUG and butyl rubber (IIR) exhibited better damping properties than pristine EUG. Therefore, this work provided a way to enhance the functionality and expand the application of bio-based EUG materials.

Effect of free volume and hydrophilicity on dehumidification performance of 6FDA-Based polyimide membranes

6FDA-based polyimide air-dehumidification membrane has been considered as one of the most advanced technologies for the energy-saving heating, ventilation, and air-conditioning systems due to their excellent solubility and processing. Nevertheless, there are few reports about the effect of free volume and hydrophilic groups on dehumidification performance. Herein, we propose to tune the free volume and hydrophilicity of 6FDA-based polyimides by tuning the hydrophilicity/hydrophobicity of diamines and/or introducing of hydrophilic carboxylic acid groups, and thus to develop a system that would support high H2O/N2 separation performance for dehumidification and retain excellent mechanical properties. It is found that 6FDA/mPDA membrane shows much higher H2O/N2 separation performance (i.e., H2O permeability 12480 Barrer and H2O/N2 separation factor of 13867) than that of the 6FDA/TFDB and 6FDA/DAM membranes even though its lower FFV. It is suggested that the FFV had a negligible effect on the H2O/N2 separation performance. Although the introduction of highly hydrophilic –COOH groups could significantly increase the H2O/N2 separation performance of hydrophobic 6FDA/TFMB and 6FDA/DAM membranes, the performance is still lower than that of 6FDA/mPDA membrane with similar hydrophilicity. In addition, we found that more –COOH groups to polymers can lead to the possible formation of hydrophilic/hydrophobic separation in membrane which will result in the rapid water vapor condensation and thus unstable air-dehumidification. Thus, the excessive hydrophilicity of 6FDA/mPDA-DABA showed a decreased H2O/N2 separation performance compared with 6FDA/mPDA membrane. These results indicated that the excellent H2O/N2 separation performance mainly depends on reasonable hydrophilicity of polyimide membrane without excessive hydrophilic groups and high FFV.

Numerical simulation and experimental study on the compression performance of a double layer cross-lattice-core sandwich structure

Lattice sandwich structures are widely used in many engineering fields for their excellent mechanical properties, such as aerospace, transportation, construction and so on. In this paper, a new type of double layer cross-lattice-core sandwich structure is proposed. Firstly, based on the nonlinear finite element software ABAQUS, a finite element numerical simulation analysis is processed to the sandwich structure unite cell under flat compression. The deflection pattern, load-displacement curve and internal energy-displacement curve are obtained to discuss the compression performance of the unite cell with some specific geometric parameters, such as arm length ratio, clamped angle and thickness of the cross-lattice-core. It is found that the compression performance of the lattice sandwich structure with an arm length ratio of 1 and an included angle of 90° is optimal. The energy absorption effect decreases slightly with the increases of the arm length ratio increases, which will be greatly reduced when the core angle is lower than 90°. Then the unite cell model of the structure is prepared using 3D printing technology, and its compression performance is investigated by flat compression tests and verified in comparison with the numerical analysis results. Finally, the load-bearing property of the structure is further verified by compression analysis of a plate structure consisting of several unite cells. The results provide a reference for the design and engineering application of the structure.

A versatile bilayer smart packaging based on konjac glucomannan/alginate for maintaining and monitoring seafood freshness

This study introduces a novel multi-functional double-layer intelligent packaging. It focuses on developing a dual-function system capable of real-time monitoring and freshness preservation. Specifically, cellulose nanocrystalline (CNC) was obtained through acid hydrolysis, and then CNC/soybean protein isolate (CNC/SPI) complex colloid particles were prepared via antisolvent method. These particles served as stabilizers to prepare oil-in-water (O/W) cinnamon essential oil Pickering emulsion (CSCEO). The CSCEO was then integrated into the emulsified hydrophobic layer of a konjac glucomannan (Kgm) matrix through intermolecular hydrogen bonding. Finally, alginate (Alg) matrix containing alizarin (Al) as an indicator was added to construct the bilayer structure using a layer-by-layer casting strategy. The inner layer Alg/Al was the pH/NH3-responsive indicator layer, while the outer layer Kgm/CSCEO acted as the high-barrier bacteriostatic layer. The obtained dual-function, double-layer film (Alg/Al-Kgm/CSCEO), which possesses a sensitive, reversible and rapid response towards pH/NH3, shows exceptional antibacterial and antioxidant properties, as well as excellent mechanical property, light-blocking capability and hydrophobicity. For monitoring and maintaining the actual freshness of shrimp, such a bilayer packaging displays smallest change of ∆E and TVB-N (18.65 mg/100 g) even after 72 h, which further highlighting its potential in enhancing food safety and extending shelf life.

Influence of surface roughness and interfacial agent on the interface bonding characteristics of polyurethane concrete and cement concrete

As a new type of concrete material, polyurethane concrete has excellent physical and mechanical properties which is widely used in the maintenance and reinforcement of damaged areas of concrete pavement. Because of the difference in the performance between polymer concrete and ordinary concrete, it is of great significance to accurately evaluate the bond performance between polymer concrete and ordinary concrete in order to avoid interface damage in the subsequent use of the repaired pavement. In this study, the bonding specimens were made by changing the roughness and interfacial agent of the bonding interface between polymer concrete and cement concrete, and splitting tensile test and direct shear test were carried out to explore the bond properties between them. Polymer concrete-cement concrete composite beam specimens were made to simulate the maintenance and reinforcement of cement concrete pavements with polymer concrete in the actual projects, and the flexural performance test was carried out to explore the common mechanical characteristics of bonding specimens. The test results showed that the bond performance of polymer concrete and cement concrete was closely related to the interface roughness and the interfacial agents, and the addition of polymer concrete improves the common stress characteristic of composite beam specimens. The test results provide a basis for polymer concrete as a rapid repair material for concrete pavement repair.