Elemental Profiles Research Articles

Quantitative profiling and baseline intervals of trace elements in healthy lung tissues

BackgroundHuman lung tissue, as an interface with the environment, is susceptible to various environmental pollutants, including trace metals. However, quantitative data on trace metals in human lung tissues remain poorly described. MethodsThis study aimed to characterize the elemental composition of histologically healthy, unaffected parts of human lung tissues, associated with non-infective, non-infiltrative, and non-malignant diseases (n = 60) for essential (Cr, Mn, Fe, Co, Cu, Zn, and Se) and toxic trace elements (Sr, Ni, As, Cd, and Pb). Additionally, we investigated the influence of personal factors (sex, age, and smoking habits) on the examined trace element profiles, as well as between the trace elements correlations in the healthy human lungs. ResultsAmong the analyzed trace elements, Fe was the most prevalent, while As was the least prevalent in healthy lung tissues. Stratifying by age revealed significantly higher Cr and Co (less Sr, Ni, and Pb) and lower Se levels in older individuals (above 65 years) compared to their younger counterparts. Sex-based differences were also notable, with Cu and Co 1.2- and 2.3-fold higher levels in females than in males. Exploring the impact of smoking habits revealed a striking 10-fold increase in Cd levels in the lung tissues of smokers compared to non-smokers. Correlation analyses showed significant positive associations between concentrations of certain toxic and essential trace elements in healthy lung tissues. ConclusionsThis study could contribute to the establishment of baseline intervals for essential and toxic trace elements, valuable for toxicological and clinical assessment, in healthy, unaffected human lungs, and indicates the influence of sex, age, and smoking. However, further larger-scale studies are needed to make more stable conclusions.

Semi-industrial ultrasound-assisted extraction of grape-seed proteins.

To manage industrial waste in accordance with the circular bioeconomy concept it is sometimes necessary to handle grape seeds, an abundant by-product of the wine-making process. This study presents a process based on ultrasound technology for the extraction of grape-seed proteins, due to their nutritional and techno-functional properties. The protein content of extracts obtained under silent and lab-scale conditions was compared with that obtained under semi-industrial ultrasound conditions, and the chemical composition (carbohydrates, total phenols, and lipids) and the elemental profiles of the final, up-scaled downstream extracts were characterized. This work found that the maximum amount of protein in the final product was 378.31 g.kg-1 of the extract. Chemical characterization revealed that each 1 kg of extract had an average content of 326.19 g gallic acid equivalent as total phenols, 162.57 g glucose equivalent as carbohydrates, and 382.76 g of lipophilic compounds. Furthermore, when the extract was checked for hazardous elements, none were found in levels that could be considered a risk for human health. The proposed semi-industrial strategy has the potential to contribute greatly to the valorization of grape seeds through the preparation of a protein-rich extract that can be used as an alternative to synthetic wine stabilizers and for the development of novel food and nutraceutical products. © 2024 Society of Chemical Industry.

Assessment of trace element and mineral levels in students from Turkmenistan in comparison to Iran and Russia

The objectiveOf the present study was to assess essential trace element and mineral levels in serum, hair, and urine of healthy first-year students from Turkmenistan (n = 73) in comparison to students from Iran (n = 78) or Russia (n = 95). Materials and methodsExamination of foreign students was performed within two days after arrival to Russia during medical examination prior admission to RUDN University. Serum, hair, and urine trace element and mineral levels were assessed with inductively coupled plasma-mass spectrometry (ICP-MS). ResultsThe data demonstrate that the levels of trace elements and minerals in students from Turkmenistan share high similarity to elemental profiles of students from Iran. In comparison to students from Russia, subjects originating from Iran and Turkmenistan are characterized by lower serum cobalt (Co), chromium (Cr), copper (Cu), manganese (Mn), molybdenum (Mo), selenium (Se), vanadium (V), zinc (Zn) levels, higher urinary Cr, Cu, Fe, Mn, V, and Zn, lower urinary Co and hair Mo, Se, and Zn content. Concomitantly, students from Turkmenistan were characterized by lower urinary Cr and Cu, serum Cu and V levels, higher circulating Zn concentration, as well as the lower hair Cr, Cu, iodine (I) and magnesium (Mg) content in comparison to Iranian subjects. The discriminant analysis demonstrated that hair, serum, and urinary trace element and mineral levels contributed to complete discrimination between the groups of students from different countries. ConclusionsThe high similarity of trace element and mineral status of students from Turkmenistan and Iran is expected to be mediated by similar geochemical conditions in the bordering countries.

Evaluating the strength of evidence of elemental profiling of polymers with LA-ICP-MS

LA-ICP-MS is a powerful technique for obtaining a forensic elemental profile of polymer evidence materials. However, the lack of homogeneous polymer reference standards hampers database creation and reliably matching a sample to a specific source. Therefore, the current study aims to evaluate the strength of evidence of forensic polymer comparisons by applying a matrix-matched reference standard with known concentrations for elements of interest. Four datasets of tapes, electrical wires, tubing, and jerrycans were compiled using LA-ICP-MS. It was found that quantification with the new PVC standard or by simply using the response of one element as internal standard significantly reduced the between-run variation. For each class of polymeric materials, characteristic elements could be identified with PCA and LDA. To facilitate classification, elemental concentrations were found to be typical for specific colors and types of polymeric materials. For forensic comparison, a score-based Bayesian likelihood ratio model and the t-test overlap method performed better than the feature-based model and 4-sigma criterion, in terms of rates of misleading evidence. Normalization to 13C and quantification with the PVC standard with and without prior normalization to 13C slightly reduced rates of misleading evidence. The t-test method showed an overall average false inclusion rate of only 0.45% and a false exclusion rate of 2.4%. Maximum calibrated likelihood ratios of 0.014 to 1778 were found for the tape dataset. In conclusion, this study demonstrates that with the use of proper standards, quantitative elemental profiling with LA-ICP-MS is a promising tool for forensic classification and comparison of polymers.

Geographical origin identification of Pujiang Kyoho grapes in China using stable isotope and elemental profiles

Grapes are an important seasonal fresh fruit in China, and their quality and nutrition is closely linked to their geographical origin. Stable isotopes and elemental profiles of grapes and corresponding soils from different regions and harvest years were determined using isotope ratio mass spectrometry (IRMS) and inductively coupled plasma mass spectrometry (ICP-MS). Results showed that stable isotope ratios and most elemental contents of grapes were significantly correlated to distinct regions and different harvest years. Na, Li, V, Co, Ni and Pb contents of grapes and corresponding soils were positively correlated, while Mg, Cu, Rb and Sr were negatively correlated (p < 0.05). A supervised chemometric model (random forest) was used to discriminate PGI Pujiang grapes from four other grape producing regions with 100% accuracy. These findings confirm that stable isotopes and multi-elements combined with chemometric analysis can effectively improve the accuracy of grape origin identification and minimize fraudulent mislabeling.

Закономерности в распределении химических элементов в листьях березы

Биологическая активность лекарственного растительного сырья и фитопрепаратов обусловлена комплексом биологически активных веществ и химических элементов. Исследование влияния условий призрастания на состав, содержание химических элементов в лекарственных растениях, лекарственном растительном сырье является актуальным. Особый интерес вызывает исследование закономерностей в распределении химических элементов в лекарственных растениях, лекарственном растительном сырье и возможность использования выявленных закономерностей для установления подлинности и чистоты сырья. Объект нашего исследования — листья березы, собранные в экологически чистой зоне и в зонах с различной степенью антропогенной нагрузки. Состав и содержание элементов анализировали методом ИСП–МС (масс-спектрометр ELAN DRC-е ICP-MS, оптико-эмиссионный спектрометр Agilent 715 ICP–OES). Статистическая обработка результатов химического анализа проведена в программе Microsoft ® Excel 2010. Сопоставление концентраций 60 элементов проводили с применением метода наименьших квадратов. Сравнительный анализ логарифмов концентраций в листьях березы, собранных из мест произрастания, различающихся по степени антропогенной нагрузки, показал сильную корреляционную связь между ними (r=0,99; R2=0,9). Диаграмма, отражающая периодическую зависимость логарифма концентраций химических элементов, представляет собой элементный профиль листьев березы и может быть использована для установления их подлинности и чистоты.

Corrosion of 316L stainless steel produced by laser powder bed fusion and powder metallurgy in pressurized water reactor primary coolant

Corrosion mechanism of 316 L stainless steel produced by laser powder bed fusion-hot isostatic pressing (LPBF-HIP) and powder metallurgy-hot isostatic pressing (PM-HIP) is studied with in-situ electrochemical impedance measurements coupled to detailed oxide film characterization. Quantitative analysis of impedance spectra using the Mixed-Conduction Model and estimation of local kinetic and transport parameters by interpretation of in-depth elemental composition profiles indicated lower corrosion and oxidation rates of LPBF-HIP and PM-HIP materials in comparison to conventional wrought 316 L. This owes to a higher fraction of low-angle grain boundaries, smaller grain size, the presence of nano-sized oxide particles and elevated Cr and Ni contents.

Identification of lentils (Lens culinaris Medik) from Eglouvi (Lefkada, Greece) based on rare earth elements profile combined with chemometrics

An analytical approach has been developed to verify the authenticity of premium lentils originating from Eglouvi, Lefkada, Greece. The method relies on the digestion of samples followed by the analysis of their rare earth elements (REEs) content. Lentils originating from Eglouvi exhibit higher content in most REEs compared to lentils from other regions as well as distinct Sc/Y and Sc/Yb concentration ratios. Principal component analysis effectively segregates “Eglouvi” lentils into a distinct cluster. Soft Independent Modelling of Class Analogy (SIMCA) successfully models “Eglouvi” lentils. Significant enhancement in model specificity was achieved upon inclusion of Sc/Y and Sc/Yb concentration ratios as additional variables. The model is capable of detecting adulteration in blends of Eglouvi lentils, with a minimum rejection threshold of 4.6% w/w for Greek lentil adulterants and 6.0% w/w for imported lentil adulterants.

Nutritional Quality and Safety Assessment of Pork Meat Cuts from Romania: Fatty Acids and Elemental Profile.

In this study, the fatty acids and elemental profiles of 53 pork cut samples were determined. To offer insights into their potential health implications, we computed 18 key nutritional indices. These indices included parameters such as saturated fatty acids (SFAs), monounsaturated fatty acids (MUFAs), polyunsaturated fatty acids (PUFAs), unsaturated fatty acids (UFAs), the MUFAs/SFAs ratio, PUFAs/SFAs ratio, atherogenic index (AI), thrombogenic index (TI), the hypocholesterolemic to hypercholesterolemic ratio (h/H), health-promoting index (HPI), hypocholesterolemic index (HI), unsaturation index (UI), saturation index (SI), peroxidizability index (PI), nutritional value index (NVI), hypocholesterolemic index of fatty acids (DFAs), hypercholesterolemic index of fatty acids (OFAs), and the DFAs/OFAs ratio. These indices were calculated based on their fatty acid composition to provide comprehensive nutritional information. A health risk assessment revealed the safety and minimum health risk for the population from consuming the investigated pork cuts using the Target Hazard Quotient (THQ), Hazard Index (HI), and target cancer risk (TR). The ANOVA test showed significant differences in the levels of K, Fe, Mn, Zn, MUFAs, and AI among the pork cut samples. It was noted that by employing the correlation between the fatty acids profile, nutritional indices, and elemental concentrations and an unsupervised statistical method, such as PCA, a perfect separation from the different pork cuts could not be obtained.

Metabolic and elemental profiling as potential discriminating features among the black mahlab seeds (Monechma ciliatum) grown in three different regions.

Black mahlab (Monechma ciliatum) seed is a rich source of metabolites and minerals and is usually believed to have a similar composition between different areas of cultivation. Until now, no studies have assessed changes in black mahlab seeds (BMSs) to determine those constituents that help to discriminate them according to geographical origin. The present study attempted to compare the metabolomics and elemental profiles of BMSs of different geographical origins and identified the potential markers using ultrahigh-performance liquid chromatography quadrupole Orbitrap tandem mass spectrometry (UHPLC-Q-Orbitrap-MS2), and inductively coupled plasma mass spectrometry (ICP-MS) techniques and established the chemometric model to identify the potential markers and discriminate them according to cultivation sites. In this work, data from metabolites analysis by UHPLC-Q-Orbitrap-MS2 and multi-elemental data obtained from ICP-MS were combined with chemometrics for tracing the geographical origin of BMSs. Principal component analysis (PCA) was used to evaluate the overall grouping of samples. In contrast, partial least squares-discriminant analysis (PLS-DA) and orthogonal partial least squares discriminant analysis (OPLS-DA) were employed for authentication. PLS-DA and OPLS-DA models were fully validated (R2Y and Q2 values > 0.5). Variable importance of various projections was applied to obtain valuable data about differential elements (seven markers were identified) and metabolites (23 markers were identified) with high discrimination potential. The outcomes presented in this study serve as an appropriate framework for developing novel discrimination approaches in food origin screening.

Essential trace element levels in multiple sclerosis: Bridging demographic and clinical gaps, assessing the need for supplementation

BackgroundMultiple sclerosis (MS) is a chronic demyelinating disorder intricately linked to perturbations in trace element levels. While previous studies have explored circulating trace elements in a limited sample, understanding the impact of demographic and clinical variables on the elemental profile within a larger cohort remains elusive. MethodsThis study aimed to evaluate essential trace elements (Cr, Mn, Co, Cu, Zn, and Se) in the sera of 215 MS patients compared to a meticulously matched control group of 100 individuals with similar gender and age. Our main objective was to identify potential variations in elemental profiles based on demographic and clinical parameters among MS patients, elucidating the prospective relevance of supplementing specific essential trace elements. ResultsData indicated a significant decrease in serum levels of Mn, Co, Zn, and Se, and an increase in Cr in MS patients compared to controls. These trace elements not only discriminated between MS patients and controls but also exhibited distinctive capabilities among demographic subgroups. Gender, smoking habits, and age strata (20–40 years and 41–60 years) revealed discernible variations in elemental profiles between MS patients and their control counterparts. Se demonstrated the singular ability to stratify cases of extreme MS severity, mild relapsing-remitting MS (RRMS) and highly severe secondary progressive MS (SPMS). In contrast, Co significantly differentiated RRMS from primary progressive MS (PPMS), while Cu significantly differentiated SPMS from PPMS. Additionally, Cu showed a negative correlation with MSSS, while Mn and Zn showed a positive correlation with EDSS. ConclusionThese findings underscore a substantive deficiency in Mn, Co, Zn, and Se in the MS cohort, supporting targeted supplementation with these trace elements. This study provides a comprehensive understanding of the intricate relationship between essential trace elements and MS, paving the way for further research into personalized nutritional interventions for this complex neurological disorder.

Probing elemental diffusion and radiation tolerance of perovskite solar cells via non-destructive Rutherford backscattering spectrometry

Mixed organic–inorganic halide perovskite-based solar cells have attracted interest in recent years due to their potential for both terrestrial and space applications. Analysis of interfaces is critical to predicting device behavior and optimizing device architectures. Most advanced tools to study buried interfaces are destructive in nature and can induce further degradation. Ion beam techniques, such as Rutherford backscattering spectrometry (RBS), is a useful non-destructive method to probe an elemental depth profile of multilayered perovskite solar cells (PSCs) as well as to study the inter-diffusion of various elemental species across interfaces. Additionally, PSCs are becoming viable candidates for space photovoltaic applications, and it is critical to investigate their radiation-induced degradation. RBS can be simultaneously utilized to analyze the radiation effects induced by He+ beam on the device, given their presence in space orbits. In the present work, a 2 MeV He+ beam was used to probe the evidence of elemental diffusion across PSC interfaces with architecture glass/ITO/SnO2/Cs0.05(MA0.17FA0.83)0.95Pb(I0.83Br0.17)3/spiro-OMeTAD/MoO3/Au. During the analysis, the device active area was exposed to an irradiation equivalent of up to 1.62 × 1015 He+/cm2, and yet, no measurable evidence (with a depth resolution ∼1 nm) of beam-induced ion migration was observed, implying high radiation tolerance of PSCs. On the other hand, aged PSCs exhibited indications of the movement of diverse elemental species, such as Au, Pb, In, Sn, Br, and I, in the active area of the device, which was quantified with the help of RBS.

Elemental profile of urolithiasis at a tertiary hospital: a four-year retrospective study

Elemental profile of urolithiasis at a tertiary hospital: a four-year retrospective study

Quality Evaluation of Asparagus officinalis by Profile of Amino Acids and Mineral Elements in Different Parts Combined with Chemometrics Methods.

Asparagus officinalis has a homologous value in medicine and vegetables. Its immature stem, commonly called asparagus, is a central edible part. Asparagus skin and leaf also contain rich nutrients. However, these parts are often discarded. This study investigated amino acid and mineral elements in immature stem, skinless asparagus, asparagus skin, and leaf. Their quality was further evaluated by chemometrics methods such as principal component analysis and neural network analysis. The results showed amino acid content was high in immature stem and skinless asparagus and low in leaf, whereas the mineral elements were in four parts. Quality evaluation results showed four parts were divided into three grades. Immature stem and skinless asparagus were grouped into cluster 1 with the best quality as high-quality raw materials in food and health-care products. Meanwhile, three AA (Cys, His, Arg) and two mineral elements (Na, Cr) were identified as quality evaluation iconic substances.

Leaf mineral profiling and its correlation with oil physicochemical traits from four olive (Olea europaea L.) cultivars grown in Morocco as affected by olive ripening stages

We investigated genotypic effects on the olive leaves mineral profile and its correlation with soil minerals. Likewise, olive oil extracted from four Mediterranean cultivars (‘Arbequina’, ‘Haouzia’, ‘Menara’, and ‘Picholine Languedoc’) at early and full ripening stages, was studied in terms of basic quality indices, fatty acids, sterols, pigments, and polyphenols. Our outcomes reveal important variations among cultivars and between ripening stages in terms of olive leaf elemental profiling and oil physicochemical traits, while there were no significant (p < 0.05) differences in soil mineral profiling. However, mineral profiling of leaves, basic quality indices, pigments, and polyphenols content of oils showed important inter-cultivar variations. Regarding fatty acid composition, oleic acid (C18:0) was the most abundant. For phytosterols profile, β-sitosterol was found to be the major phytosterol followed by campesterol. Olive oil from fully ripe fruits was marked by reduced chlorophylls (up to − 67.1%), carotenoids (up to − 68.73%) in ‘Menara’ and polyphenols (up to − 45.95%) in ‘Picholine Languedoc’, but an increase of total sterols (up to + 23.5%, ‘Haouzia’). Likewise, saturated (SFA) and monounsaturated fatty acids (MUFA) tended to decrease (up to − 13.5% and − 6.44%, respectively) found in ‘Menara’. However, ‘Arbequina’ had an inceased SFA (+ 7.35%) and MUFA (+ 8.62%). Polyunsaturated fatty acids tended to increase (up to + 41.98%, ‘Menara’) except for ‘Picholine Languedoc’ (− 7.92%). These outcomes were confirmed by principal component analysis with important positive and negative correlations among minerals and oil physicochemical traits. These results showed that the analyzed components could be considered as specific markers to discriminate the studied cultivars.Graphical abstract

A screening study of elemental composition in legume (Fabaceae sp.) cultivar from Serbia: Nutrient accumulation and risk assessment

The study is the first analytical approach to evaluate thirteen elements’ profiles of 4 different species (Phaseolus spp., Vicia spp., Pisum spp. and Lathyrus spp.) comprising 38 varieties of legumes cultivated in Serbia. The inductively coupled plasma with an optical emission spectrometer (ICP-OES) was used to determine the levels of macro-, micro- and trace elemental contents, namely, P, K, Ca, Mg, Fe, Cu, Zn, Mn, Cd, Pb, Ni, Cr and As, after microwave-assisted digestion. MANOVA was utilized to reveal significant differences in elemental composition within and between groups, while PCA to reveal the underlying patterns. Among the macroelements, the most abundant was K (8980.7–14177.4 mg kg−1), followed by P, Mg and Ca, being the highest in Phaseolus spp. The data revealed that the studied legumes generally contained a high amount of Zn and Fe, with Lathyrus spp. being the richest in Zn. The mean concentration of trace elements in the analyzed legume samples was in the following order: Ni (24.2–57 mg kg−1) > Cr (0.8–4.1 mg kg−1) > Pb (0.07–1.2 mg kg−1) > Cd (0–0.07 mg kg−1). The determined Pb and Cd contents in all cultivars exceeded the set maximum limits by European and Serbian legislation, having a potential for human health risk. Pattern recognition techniques applied to the data did not distinguish among the species, revealing a similar elemental profile. In conclusion, this study highlights legumes as an extremely valuable source of macro- and microelements, but also the importance of monitoring the level of heavy metals in this commonly consumed foodstuff.

Elemental Profiling of different Cancer Patients by ICP-MS from River Indus Region Sindh, Pakistan

Background: The relationship between exposure to heavy metals and the development of cancer has been a subject of extensive research. Trace elements, both essential and non-essential, play significant roles in various biological processes, with imbalances potentially contributing to carcinogenesis. This study aims to investigate serum concentrations of selected metals in cancer patients and compare these levels with those of a healthy control group, highlighting the potential link between metal exposure and cancer risk. Objective: To quantify and compare the serum concentrations of sodium (Na), calcium (Ca), iron (Fe), cadmium (Cd), and arsenic (As) in cancer patients and a control group, thereby assessing the potential association between elevated levels of specific metals and cancer incidence. Methods: This cross-sectional study analyzed blood samples from cancer patients (n=30) and a matched control group (n=30) from the Jamshoro and Hyderabad areas. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was utilized to measure serum concentrations of Na, Ca, Fe, Cd, and As. Participants' demographic data, including age, gender, place of residence, degree of education, cancer type, and water sources, were collected through questionnaires. Statistical analyses were conducted to compare metal concentrations between groups, with P-values &lt;0.05 considered significant. Results: The average ages of cancer patients and controls were 55.3 ± 15.7 and 52.13 ± 23.7 years, respectively. Significantly higher serum Na levels were observed in cancer patients compared to controls (P &gt; 0.05), with an average concentration exceeding 32.04 µg/L. Cd levels were also higher in the cancer group (0.0046 ppm) compared to controls (0.0000 ppm), contrary to expectations. Conversely, no significant difference was found in As levels between groups. Serum Fe concentrations were substantially higher in cancer patients (P &gt; 0.4949), with Ca levels in cancer patients also elevated (3.302 ppm). Conclusion: The study found significant discrepancies in serum metal concentrations between cancer patients and healthy controls, suggesting an association between elevated levels of certain metals and increased cancer risk. These findings emphasize the need for further investigation into the role of metal exposure in carcinogenesis and the potential for incorporating metal concentration assessments into cancer risk evaluation protocols.

High-concentration silver alloying and steep back-contact gallium grading enabling copper indium gallium selenide solar cell with 23.6% efficiency

Chalcopyrite-based solar cells have reached an efficiency of 23.35%, yet further improvements have been challenging. Here we present a 23.64% certified efficiency for a (Ag,Cu)(In,Ga)Se2 solar cell, achieved through the implementation of a series of strategies. We introduce a relatively high amount of silver ([Ag]/([Ag] + [Cu]) = 0.19) into the absorber and implement a ‘hockey stick’-like gallium profile with a high concentration of Ga close to the molybdenum back contact and a lower, constant concentration in the region closer to the CdS buffer layer. This kind of elemental profile minimizes lateral and in-depth bandgap fluctuations, reducing losses in open-circuit voltage. In addition, the resulting bandgap energy is close to the local optimum of 1.15 eV. We apply a RbF post-deposition treatment that leads to the formation of a Rb–In–Se phase, probably RbInSe2, passivating the absorber surface. Finally, we discuss future research directions to reach 25% efficiency.

Unveiling origins, composition, and appearance of ancient Islamic gold coins through elemental and smartphone-based colorimetric studies

In this article, the Islamic gold coins collections of the University of Valencia is studied for the first time for its elemental composition and colorimetric properties. To that end, non-destructive elemental analysis using energy-dispersive X-ray fluorescence is applied to obtain the coins’ elemental profile. Additionally, the colour of the coins is assessed using smartphone-based colorimetry as an innovative non-invasive method. Results indicate that the Islamic coins could be attributed to Almoravids, and the gold origin could be the famous Sudanese gold, an ore which was valued all over the world. Also, the text found in the coins was translated and allowed to objectively identify the mint and year. Based on these results, it can be seen that the earliest coins struck in the Iberian Peninsula are characterised by slightly lower gold concentrations than the ones struck in the northern part of Africa, pointing towards a potential recycling of coins which already circulated in the area. In conclusion, this work provides new analytical insights into a peculiar and unique type of samples, allowing to draw some conclusions in terms of their origins and materials, and for the first time allows to characterise the chromatic coordinates of this type of samples.

Mineral and potentially toxic element profiles in the soil-feed-animal continuum: Implications for public, environmental, and livestock health in three pasture-based sheep farming systems

Grazing livestock derive most of their mineral requirements from foraging. The presence of toxic elements in soils has become a significant concern for food safety and ecosystem services. Understanding the mineral content profiles in soil and forage is crucial for assessing animal health, predicting potential transfers of minerals or heavy metals into the food-chain, and assessing threats to the environment and human health. In this study, Na, Mg, P, K, Ca, Mn, Fe, Co, Cu, Zn, Se, As, Cd, Hg, and Pb were measured to determine the mineral status of three different pasture-based farming systems (with grazing sheep livestock) in a Spanish region of significant economic importance. A risk assessment evaluation of animal, environmental, and human health was performed on soil, forage, feed, serum, milk, and wool. Notably, traces of Pb, and As were identified in pastures in all farms. Our calculation of pollution indices revealed moderate levels of contamination by various elements, including Co, Cu, Zn, Se, As, Cd, Hg, and Pb. The two farms with more intense agrosystem practices showed a significant potential ecological risk, characterized by high soil levels of Hg and Cd. Animals from these farms also had high concentrations of these metals in wool. Although the target Hazard Quotient derived from milk consumption suggests that dairy products from this area are safe for consumption for adults, only milk from a dehesa farm (mix of woodland and pastureland) was free of potential health concerns related to Pb exposure. Our assessment of mineral profiles reveals a cohesive relationship between soil quality and derived animal products, particularly of the Merino sheep breeding and farming system. The results reveal the importance of adopting and reinforcing strategies to preserve dehesas as a sustainable and environmentally friendly agrosystem in the western Mediterranean region.