Box Design Research Articles

Aqueous ozone sanitization of whole peeled onion: Process optimization and evaluation of keeping quality during refrigerated storage

Fruits and vegetables, especially in their minimally processed form, are highly susceptible to microbial spoilage, highlighting the need of a safe and effective sanitizing agent to extend their shelf-life. This study was carried out to optimize the aqueous ozone sanitization parameters viz. ozone concentration (1–5 mg/L), exposure time (2–8 min), and pH (3–5) for whole peeled onion. Consequently, the keeping quality was investigated for ozonated (optimized conditions), chlorinated (100 mg/L) and water-washed samples packed in tray packs and stored under refrigerated conditions (5±1 °C, 90 ± 1 % RH). Numerical optimization using the 3 factor, 3 level, Box and Behnken design suggested that aqueous ozone at 4.51 mg/L exposed to the onions for 8 min at a pH of 3 provided optimized sanitization that resulted in the most favorable reductions in microbial load (3.74 log CFU/g), pyruvate content (14.2 % less than fresh untreated) and a good overall acceptability score (8.5). After storage, the microbial shelf life obtained from optimized ozone sanitization was found to be 14.3 % (2 d) higher than water-washed and 13.04 % lower than chlorinated samples. Ozone-treated onion was observed to retain better quality attributes in terms of pyruvate content, color change and firmness as compared to other treatments studied.

Design and Development of IoT-Enabled Medicine Reminder Box

IoT (Internet of Things) refers to a system of internet-connected devices which are capable of sending and receiving the data without human intervention. This technology enabled the remote monitoring in health care sector which lead to keep the patients safe and heathy, and ensuring to deliver superlative care. Some people apparently should be taken care by the caretakers and other family members. This is not provided by everyone in today’s life. So, they may forget to consume medicines at the right time and may also forget what pill has to be taken. This paper aims to develop a device which alerts the patients to take medicine at the right time in an efficient manner. The proposed system has a facility which alerts the patients to take medicine on time and also acknowledges the medicine in-take through a Gmail notification. In the proposed system, the alarm is set up with the help of Blynk app indicating the patient to take the medicine. The IR sensor interfaced with the microcontroller unit determines the patient medicine in-take. The sensor detects the hand movement of the patient when he opens and takes the medicine from the slot provided. The corresponding message is sent to the caretaker via Gmail based on the IR sensor status.

Multilevel information fusion for cryptographic substitution box construction based on inevitable random noise in medical imaging

Block cipher has been a standout amongst the most reliable option by which data security is accomplished. Block cipher strength against various attacks relies on substitution boxes. In literature, extensively algebraic structures, and chaotic systems-based techniques are available to design the cryptographic substitution boxes. Although, algebraic and chaotic systems-based approaches have favorable characteristics for the design of substitution boxes, but on the other side researchers have also pointed weaknesses in these approaches. First-time multilevel information fusion is introduced to construct the substitution boxes, having four layers; Multi Sources, Multi Features, Nonlinear Multi Features Whitening and Substitution Boxes Construction. Our proposed design does not hold the weakness of algebraic structures and chaotic systems because our novel s-box construction relies on the strength of true random numbers. In our proposed method true random numbers are generated from the inevitable random noise of medical imaging. The proposed design passes all the substitution box security evaluation criteria including Nonlinearity, Bit Independence Criterion (BIC), Strict Avalanche Criterion (SAC), Differential Approximation Probability (DP), Linear Approximation Probability (LP), and statistical tests, including resistance to Differential Attack, Correlation Analysis, 2D, 3D histogram analysis. The outcomes of the evaluation criteria validate that the proposed substitution boxes are effective for block ciphers; furthermore, the proposed substitution boxes attain better cryptographic strength as compared to very recent state-of-the-art techniques.

Are Echo-Reflective Cues Effective to Attract Bats to Newly Placed Artificial Roosts?

The availability of suitable roosts is an important factor affecting the viability of bat populations. In Europe and North-America, the installation of artificial roosts is a standard conservation measure to mitigate the loss of tree cavities or crevices at buildings. How quickly artificial roosts, such as bat boxes, are adopted, depends on how easily the bats can find them, and on their suitability for roosting. While there is some information about how the design of bat boxes influences their occupancy, it is unknown to what extent the use of bat boxes depends on their detectability. In this experimental field study, we studied the roost selection behavior of three forest-living bat species. We investigated whether attaching an external echo-reflector to bat boxes influenced the time until the bats discover a box or the total number of discovered boxes, which are proxies for detectability. We also assessed whether this modification improved the occupancy of newly placed boxes, as a proxy for their attractiveness. As a result of a previous study, all studied bat colonies were familiar with the echo-reflector as an indicator for the suitability of bat boxes as a day roost. For each species, we compared between boxes with and without an echo-reflector, the number of boxes discovered, the number of days elapsed until discovery, the number of subsequent visits, and the number of days that each box type was used as day roosts. Myotis bechsteinii and Myotis nattereri discovered, visited and used more unmodified boxes than boxes with echo-reflectors. Plecotus auritus did not show differences in behavior with regard to the box types. Our results show that attaching an echo-reflector to newly placed artificial roosts does not improve their discovery and subsequent occupation, even when bats are already familiar with this cue as an indicator of suitability. We discuss the implication of our findings for bat conservation.

Add-on effect of Ayurvedic treatment protocol for diabetic retinopathy: A randomized controlled clinical study.

Diabetic retinopathy (DR), the leading cause of visual disability in diabetics, is a significant complication of diabetes mellitus. Currently available conventional treatments for DR have certain limitations, considering which Ayurvedic treatment protocol was designed. The aim of this study was to evaluate the clinical efficacy of the Ayurvedic treatment protocol for DR. This was a randomized, controlled, black box design clinical study conducted from April 2016 to September 2017 by the department of Shalakya Tantra of a tertiary academic hospital in Western India. A hundred patients of DR in the age group 30-70 years were randomly divided into two groups by simple random sampling using computer-generated random number tables. In the trial group (n = 70), the preparatory phase included Dipana-Pachana (stomachic and digestant), Koshtha Shodhana (mild therapeutic purgation), and Shiro Virechana (eliminative nasal medication). The treatment phase included Marsha Nasya (nasal medication) and Pratimarsha Nasya (nasal medication of mild dose) with Durvadi Ghrita, Takra Dhara (pouring medicated buttermilk over the scalp) with Siddha Takra, and intake of Rasayana Yoga (treatment duration - 3 months). In the control group (n = 30), patients were kept under conservative treatment and observed during the trial period of 3 months. Patients of both groups continued with their treatment for diabetes and DR if any. Two follow-ups were done at an interval of 15 days. The primary outcomes were objective signs like best-corrected visual acuity (BCVA); ophthalmoscopic signs such as superficial hemorrhages, dot-blot hemorrhages, hard exudates, cotton wool spots, neovascularization disc, neovascularization elsewhere, and fibrovascular proliferation; subjective symptoms such as diminished vision, blurred vision, frequent changes in presbyopia glasses, perception of flashes of light, floaters, and problem for dark adaptation. The secondary outcomes were fasting blood sugar (FBS), postprandial blood sugar (PPBS), urine sugar, serum cholesterol, hemoglobin (Hb), glycosylated HbA1C, liver function test, and renal function test outcomes were assessed before and after the treatment. Ninety participants were included in the analysis of the primary outcome (62 in the trial and 28 in the control group). The trial group provided better results which were statistically significant on dot-blot hemorrhages, superficial hemorrhages, hard exudates, BCVA, FBS, and serum cholesterol. Both the groups provided almost similar effects in PPBS, Hb, HbA1C, and urine sugar which were statistically insignificant. Adverse effects were not reported in any of the patient among either groups. Ayurvedic treatment protocol is safe and effective in DR.

Crashworthiness design and multi-objective optimization of a novel auxetic hierarchical honeycomb crash box

Crashworthiness design and multi-objective optimization of a novel auxetic hierarchical honeycomb crash box

Harnessing Participatory Formative Research to Inform Women’s Preferences on Multiple Micronutrient Supplement (MMS) Design Considerations Across Four Country Contexts

ObjectivesTo determine universally acceptable MMS box design inputs including preferred color scheme, logo, and slogan options to include in demonstration projects across four countries. MethodsDesign: This multi-phased, formative study was conducted between Oct. 2020 - Feb. 2021 in Burkina Faso, Bangladesh, Tanzania, and Madagascar. It was designed using a social marketing framework and employed Rapid Assessment Procedures (RAP). Data collection methods and sampling: Qualitative methods were used to inform MMS product design and promotional strategies, including 40 participatory workshops and 32 focus group discussions with pregnant women across four countries. In Burkina Faso, a survey was administered to pregnant women (n = 30) for further triangulation. During data collection, several mock MMS box designs, with design options based on local contexts, were used as stimulus prompts for discussion and voting on preferred MMS design color schemes, logos, and slogans. Analysis: Data across methods were synthesized to identify the most preferred MMS characteristics. ResultsColor scheme: Overall, a white/pink MMS box color scheme was the most preferred, universal packaging color across countries. Participants explained that white was “clean”, and in Burkina Faso, it reminded participants of a local paracetamol package “which has no side effects.” The pink was described as “soft and attractive.” In Madagascar, there was a stronger preference for an orange/green color scheme, with pink as a second choice. Box logo: Across countries, participants suggested an image of a pregnant woman on the box design to ensure it is recognizable for its intended purpose. In Burkina Faso, participants voted for a ‘healthy pregnant woman smiling, holding the supplement’ and in Madagascar, participants preferred a ‘healthy, pregnant woman taking the supplement.’ Promotional slogans: While there was variation in specific slogan recommendations to promote MMS by country, shared themes related to good health, strength, happiness, and God. The MMS box design was thus tailored to reflect a combination of preferences. ConclusionsEngaging pregnant women who will be end-users of MMS through participatory methods in four countries aided to inform programming that may improve supplement acceptability and compliance across contexts. Funding SourcesBill and Melinda Gates Foundation.

Mechanical Behavior Modeling of Containers and Octabins Made of Corrugated Cardboard Subjected to Vertical Stacking Loads.

The aim of this paper is to characterize the mechanical behavior of corrugated cardboard boxes using simple models that allow an approach to the load capacity and the deformation of the boxes. This is very interesting during a box design stage, in which the box does not exist yet. On the one hand, a mathematical model of strength and deformation of boxes with different geometry is obtained from experiments according to the Box Compression Test and Edge Crush Test standards. On the second hand, a finite element simulation is proposed in which only the material elastic modulus in the compression direction is needed. For that, corrugated cardboard sheets are glued to build billets for testing, and an equivalent elastic modulus is obtained. This idea arises from the fact that the collapse of the box is given by the local bucking of the corrugated cardboard panels, due to the slenderness itself, and the properties in the compression direction are predominant. As a result, the numerical models show satisfactory agreement with experiments, concluding that it is an adequate methodology to simulate in a simple and efficient way this type of boxes built with corrugated cardboard.

Design and Research of an Intelligent Medicine Box

In order to solve these problems, such as forgetting to take medicine, wrong dosage or type of medicine, an intelligent medicine box is designed. The intelligent medicine box is composed of a piston dispensing mechanism, a platform moving mechanism and a main body mechanism, etc. Close cooperation between various parts, realize the functions of storing medicines, automatically dispensing medicines, intelligent reminders, intelligent detection and intelligent sterilization. Through the simulation in solidworks, the mechanical performance simulation analysis. The results show that the deformation of the crank is very small during the whole process of dispensing medicines, there is no concentrated stress, and it has no effect on the dispensing efficiency during the dispensing process. The designed intelligent medicine box is not only for the elderly, but also suitable for all kinds of people. It can promptly remind patients to take drugs, reduce the occurrence of problems such as wrong medication and forgetting to take drugs. It is user-friendly in design, simple and convenient to operate, helps smart medical treatment, eases the pressure of medical care, and has good market application value.

Mastering the control of the Rho transcription factor for biotechnological applications

The present review represents an update on the fundamental role played by the Rho factor, which facilitates the process of Rho-dependent transcription termination in the prokaryotic world; it also provides a summary of relevant mutations in the Rho factor and the insights they provide into the functions carried out by this protein. Furthermore, a section is dedicated to the putative future use of Rho (the 'taming' of Rho) to facilitate biotechnological processes and adapt them to different technological contexts. Novel bacterial strains can be designed, containing mutations in the rho gene, that are better suited for different biotechnological applications. This process can obtain novel microbial strains that are adapted to lower temperatures of fermentation, shorter production times, exhibit better nutrient utilization, or display other traits that are beneficial in productive Biotechnology. Additional important issues reviewed here include epistasis, the design of TATA boxes, the role of small RNAs, and the manipulation of clathrin-mediated endocytosis, by some pathogenic bacteria, to invade eukaryotic cells. KEY POINTS: • It is postulated that controlling the action of the prokaryotic Rho factor could generate major biotechnological improvements, such as an increase in bacterial productivity or a reduction of the microbial-specific growth rate. • The review also evaluates the putative impact of epistatic mechanisms on Biotechnology, both as possible responsible for unexpected failures in gene cloning and more important for the genesis of new strains for biotechnological applications • The use of clathrin-coated vesicles by intracellular bacterial microorganisms is included too and proposed as a putative delivery mechanism, for drugs and vaccines.

English

In the traditional cropping systems of Benin Republic, soybean is mostly cultivated with no mineral fertilizer supply, despite the decrease of soil fertility. Furthermore, there is no specific fertilizer available for the crop, in spite of its cash crop character. This leads to weak crop yield in the farmers’ fields. The present study aims to determine the optimal doses of each N, P, K, Mg and Zn nutrient to improve soybean production in the Sudano-Guinean and Sudanian zones of Benin Republic. Two years (2018 and 2019) experiment has been carried out in Ouessè district (Sudano-Guinean zone) and Bembèrèkè district (Sudanian zone). Box and Behnken rotating design was used to define N, P, K, Mg and Zn dose combinations leading to 46 combinations. A completely randomized block design was set up considering farmers as replication. In total four farmers’ fields are selected. A one-way analysis of variance is made on the yield data, using the linear mixed-effect model. Response surface analyses are used to determine the optimal dose for each N, P, K, Mg and Zn. The supply of macronutrients combined with Zn, significantly (p = 0.001) improved the soybean grain and above biomass yields as well as the harvest index. The quadratic models were efficient (R² > 0.7) to estimate soybean grain yields considering the nutrient dose variation. The optimal N, P, K, Mg and Zn doses of 15.46, 23.20, 28.6, 16.8 and 6.9 kg.ha-1, respectively (for the Sudano-Guinean zone) and 14.02, 23.89, 17.82, 11.45 and 4.26 kg.ha-1, respectively (for the Sudanian zone) lead to an optimal seed yield of 2 t.ha-1 (that is, almost 2.2 times the yield in the farmers’ field). The development of fertilizer formulas using these determined optimal doses would constitute a suitable technology helping to increase soybean production in both areas. Key words: Soil fertility, biofortication, Box and Behnken design, linear mixed-effect model, leguminous, response surface, micronutrient.

Transient behavior of non-toxic natural and hybrid multi-layer desiccant composite materials for water extraction from atmospheric air.

Producing clean water via renewable solar energy and available low-cost natural resources is one of paramount issues for the near future sustainable cleaner production theme to promote civilization. This work investigates the transient behavior of a solar-driven clean water extraction system from air by various desiccant natural and hybrid composite materials. Different single composite desiccant materials, hybrid single composite desiccant material, and hybrid multi-layers composite desiccant materials were examined using an efficient design of a solar glass box with four glass faces and square base setup. Nine different single composite desiccant materials were compared for water production from atmospheric air considering jute, wool, cotton, and maize starch host materials. The effect of CaCl2 solution concentration on the hybridization of such materials was also investigated to examine and optimize their water productivity efficiency. Thirteen hybrid multi-layer starch-based composite desiccant material types were utilized. Different layer combinations and weight percentages of hybrid composite desiccant materials were optimized based on the performance in the single hybrid composites stages including wool/CaCl2/starch, jute/CaCl2/starch, and cotton/CaCl2/starch. Results have indicated that the transient behavior of water productivity of composite desiccants increased as the wool percentage by mass in the composite has been increased. The transient behavior of water productivity of both single and hybrid multi-layer composites reached its maximum at 1:00 o'clock PM. The quality of extracted water was analyzed using total dissolved solids (TDS) test and found to be within the excellent category of clean water suitable for human being. Water generated from the samples that contain only natural fibers and starch was the cleaner and non-toxic.

Design, Fabrication, and Performance Analysis of an Automatic Horizontal Egg Incubator

This research paper presents the design, construction, and performance testing of an automatic electrically powered egg incubator utilizing the horizontal placement of eggs. This experimental research was driven by the specific design and construction of a well-insulated rectangular egg-incubating box of dimension 400 mm × 600 mm × 500 mm and thickness 30 mm, where sample eggs were kept for experimental test analysis under the favorable temperature and humidity inside the box, which was automatically controlled. The device was made to operate under the temperature range of 37°C – 38°C, which was found to be adequate for developing embryos and also maintaining relative humidity at the range of 45–60% for the first 18 days and 60–90% for the last three days. Finally, in this machine, the egg tray was adjusted horizontally, and a motor clamped mechanism was used 5 times a day which was controlled automatically by a micro-controller for the motion of eggs up to 18 days of incubation. In conclusion, this egg-incubating machine has an efficiency and hatchability of 72.22%.

Spout hollow nest boxes provide a drier and less stable microclimate than natural hollows

AbstractArtificial tree hollows (e.g., nest‐boxes) are commonly deployed to mitigate the loss of mature trees within human‐disturbed landscapes. Their effectiveness as a habitat resource, and thus conservation management tool, is strongly influenced by the suitability of internal microclimate conditions. In south‐eastern Australia, spout hollows are a nesting resource used by a diverse community of vertebrate species. We tested the suitability of a novel nest box design (spout boxes) that mimicked the physical characteristics of spout hollows. We monitored the occupancy (n = 193) and internal microclimate (n = 131) of natural hollows and spout boxes within a woodland where natural tree hollows were once abundant. Both natural hollows and spout boxes were occupied and used for breeding by birds and mammals. Natural hollows had consistently higher humidity, and thermal maxima and minima were buffered, when compared with spout boxes. These differences were largely explained by wall thickness. Spout boxes displayed even more extreme temperature variation and lower humidity when not shaded. While more extreme microclimate conditions did not prevent usage, tolerable thresholds for hollow‐dependent species may soon be exceeded under current climate change projections. Managers need to carefully consider nest box design and positioning to ensure the suitability of these supplementary resources for conservation purposes.

Maximum Power Point Box (MPPB) Design to Advance BIPV Installations on Residential Properties

Photovoltaic installations on residential properties gained high momentums during the past decade. Building integrated photovoltaic materials are well developed and has the potential to advance the photovoltaic systems installations on residential and commercial buildings. One of the main limitations on residential system is the utility allowable AC power generation. The installation of BIPV on houses offer numerous orientation and tilts of the PV system which ensure sun energy is harvested for wider timeframe. The different orientations and tilts reflect changes in the generate output power. The available residential inverters have one of two MPPTs which limit the orientation and tilts of the system to a maximum of two options per inverter. Adding more inverters will add cost burden on the system, exceed the utility maximum allowable AC power generation, and additional inverters will not work at rated power throughout the day. The works in this paper include the detail design of a maximum power point box (MPPB) that harvest the sun energy for different orientations and tilts, manage and regulate the DC Bus Bar voltage level as well as generated DC power prior the inverter input terminal. The process is governed by an input from the inverter using an industrial communication protocol such as MODBUS. The aim of the box is to reduce the number of inverters required for maximum power generation while maintaining the maximum AC limits set the by utilities. The paper includes the details design with the proposed circuit along its optimum logics. Case study is also included Photovoltaic installations on residential properties gained high momentums during the past decade. Building integrated photovoltaic materials are well developed and has the potential to advance the photovoltaic systems installations on residential and commercial buildings. One of the main limitations on residential system is the utility allowable AC power generation. The installation of BIPV on houses offer numerous orientation and tilts of the PV system which ensure sun energy is harvested for wider timeframe. The different orientations and tilts reflect changes in the generate output power. The available residential inverters have one of two MPPTs which limit the orientation and tilts of the system to a maximum of two options per inverter. Adding more inverters will add cost burden on the system, exceed the utility maximum allowable AC power generation, and additional inverters will not work at rated power throughout the day. The works in this paper include the detail design of a maximum power point box (MPPB) that harvest the sun energy for different orientations and tilts, manage and regulate the DC Bus Bar voltage level as well as generated DC power prior the inverter input terminal. The process is governed by an input from the inverter using an industrial communication protocol such as MODBUS. The aim of the box is to reduce the number of inverters required for maximum power generation while maintaining the maximum AC limits set the by utilities. The paper includes the details design with the proposed circuit along its optimum logics. Case study is also included

Maximum Power Point Box (MPPB) Design to Advance BIPV Installations on Residential Properties

Photovoltaic installations on residential properties gained high momentums during the past decade. Building integrated photovoltaic materials are well developed and has the potential to advance the photovoltaic systems installations on residential and commercial buildings. One of the main limitations on residential system is the utility allowable AC power generation. The installation of BIPV on houses offer numerous orientation and tilts of the PV system which ensure sun energy is harvested for wider timeframe. The different orientations and tilts reflect changes in the generate output power. The available residential inverters have one of two MPPTs which limit the orientation and tilts of the system to a maximum of two options per inverter. Adding more inverters will add cost burden on the system, exceed the utility maximum allowable AC power generation, and additional inverters will not work at rated power throughout the day. The works in this paper include the detail design of a maximum power point box (MPPB) that harvest the sun energy for different orientations and tilts, manage and regulate the DC Bus Bar voltage level as well as generated DC power prior the inverter input terminal. The process is governed by an input from the inverter using an industrial communication protocol such as MODBUS. The aim of the box is to reduce the number of inverters required for maximum power generation while maintaining the maximum AC limits set the by utilities. The paper includes the details design with the proposed circuit along its optimum logics. Case study is also included Photovoltaic installations on residential properties gained high momentums during the past decade. Building integrated photovoltaic materials are well developed and has the potential to advance the photovoltaic systems installations on residential and commercial buildings. One of the main limitations on residential system is the utility allowable AC power generation. The installation of BIPV on houses offer numerous orientation and tilts of the PV system which ensure sun energy is harvested for wider timeframe. The different orientations and tilts reflect changes in the generate output power. The available residential inverters have one of two MPPTs which limit the orientation and tilts of the system to a maximum of two options per inverter. Adding more inverters will add cost burden on the system, exceed the utility maximum allowable AC power generation, and additional inverters will not work at rated power throughout the day. The works in this paper include the detail design of a maximum power point box (MPPB) that harvest the sun energy for different orientations and tilts, manage and regulate the DC Bus Bar voltage level as well as generated DC power prior the inverter input terminal. The process is governed by an input from the inverter using an industrial communication protocol such as MODBUS. The aim of the box is to reduce the number of inverters required for maximum power generation while maintaining the maximum AC limits set the by utilities. The paper includes the details design with the proposed circuit along its optimum logics. Case study is also included

Multi-Segment Crash Box Energy Absorption Ability Using Computer Simulation

Crash box is one of the passive safety components in vehicles, especially cars that are designed to reduce the occurrence of injuries to drivers and passengers due to collisions. This study aims to determine the energy absorption of the crash box with a multi-segment circular cross section. The research method used is quasi-experimental, namely by computer simulation using Finite Element Method-based software. The independent variable in this study is the location of the segment connection, including: 1/4, 1/3, and 1/2 of the total length of the crash box. While the dependent variables that are sought include: energy absorption, force reaction, and deformation patterns that occur in the crash box. The crash box will be hit by an impactor with a mass of 103 kg and a speed of 7.67 m/s. From the simulation results, the maximum energy absorption and force reaction values are found in the crash box at connection 1/2 of 1689.7 J and 67718 N, followed by connection 1/3 with values of 1221.2 J and 56127 N, and the last is at 1/4 connection is 1119.8 J and 55443 N. Judging from the deformation pattern, the connection at 1/4 and 1/3 is buckling so that the energy absorption is lower than the crash box at the 1/2 connection. It is concluded that the most optimal design of the crash box with a multi-segment circular cross section is the model at the 1/2 connection because it has the highest energy absorption value of the other 2 models and the deformation tends to be more stable.

Pain-Administrable Neuron Electrode with Wireless Energy Transmission: Architecture Design and Prototyping.

Back pain resulted from spine disorders reaches 60–80% prevalence in humans, which seriously influences life quality and retards economic production. Conventional electrical pain relief therapy uses radiofrequency to generate a high temperature of 70–85 °C on the electrode tip to destroy the neural transmission and stop the pain. However, due to the larger area of stimulation, eliciting significant side effects, such as paralysis, contraction, and a slightly uncomfortable feeling, our study aimed to design a tiny and stretchable neural stimulatory electrode that could be precisely anchored adjacent to the dorsal root ganglion which needs therapy and properly interfere with the sensory neural transmission. We also designed a subcutaneously implantable wireless power transmission (WPT) device to drive the neural stimulatory electrode. Through the study, we elaborated the design concept and clinical problems, and achieved: (1) the architecture design and simulation of the transdermal wireless power transferred device, (2) a wrap-able pulsed radiofrequency (PRF) stimulatory electrode, (3) an insulation packaging design of the titanium protection box. The feasibility study and hands-on prototype were also carried out.

Finite element stress analysis of three-stage gear box

The stress analysis of the three-stage gearbox is carried out by finite element analysis method using the Ansys commercial program. The triple reduction helical gearbox is made of AISI 5115 Steel (16MnCr5) and AISI 8620. Static structural and rigid dynamic analyzes are performed in this work. The three-stage helical gearbox is a three-stage gearbox transmitting 0.5 kW at 1390 rpm with a reduction ratio of 127.99:1. After setting the boundary conditions for helical gears, the analysis is performed. Rotational velocity is given to rotating gears for static structural analysis. Analyzing these types of gearboxes to be produced enables the product to be produced more consciously with optimum design parameters with its right safety coefficients. After the static analysis, dynamic analysis is also performed using the modal analysis option of Ansys software. After the mode shape analysis and natural frequency analysis are performed, the operation frequency values of the gearbox are calculated by considering the input and output rpm values in the gearbox. These calculated values are compared with the normal operating condition to see if there will be any resonance in the gear box design during normal operating conditions.

Multi-objective optimization of crash box filled with three-dimensional cellular structure under multi-angle impact loading

Oblique impact loading conditions are common in automobile collision accidents, which strongly influence the energy absorption performance of thin-walled structures. In this paper, a novel three-dimensional (3-D) hexagonal structure-filled crash box with better comprehensive crashworthiness under multiple working conditions is proposed. First, the finite element models of four 3-D typical cellular structures (hexagon structure, re-entrant hexagon structure, star-shape structure, double arrow structure) are established. The dynamic responses of four structures under different impact angles (from 0° to 30°) and impact velocities (from 5 to 15 m/s) are discussed. The results reveal that the 3-D hexagonal structure has great advantages in terms of the energy absorption at varying inclination angles. Second, the 3-D hexagonal structure is filled in the crash box in the form of gradient distribution. The multi-island genetic algorithm (MIGA) based on the response surface model (RSM) is utilized to explore the optimal design of crash box. Compared with the traditional crash box, the optimal 3-D hexagonal structure-filled crash box increases 18.9% in specific energy absorption and decreases 21.7% in maximum peak force, which demonstrates great potential for applications in impact engineering.