Crystal Violet Research Articles

Surface-Assisted Laser Desorption/Ionization Mass Spectrometry with a Two-Dimensional Au Nanoparticle Array for Soft Ionization.

Surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) is a valuable technique for detecting small molecules in environmental and medicinal studies. We investigated dot-like and 2D-array gold nanoparticle-based SALDI-MS substrates that excite surface plasmons and enhance the desorption/ionization of sample molecules via charge transfer between the substrate and sample molecules. We aimed to optimize the nondissociative detection of sample molecules by efficiently transferring energy while suppressing excess internal energy. SALDI-MS measurements using crystal violet (CV) molecules revealed ion intensity and spectral pattern differences between the dot-like and 2D-array substrates. SALDI-MS measurements using dot-like substrates suggested two desorption/ionization processes: internal energy supply and charge transfer between the substrate and sample molecules. However, SALDI-MS measurements using 2D-array substrates suggested that the internal energy supply was suppressed. As a result, the dot-like substrate provided higher desorption/ionization efficiency but increased fragmentation, whereas the 2D-array substrate was suitable for highly sensitive and nondissociative SALDI-MS measurements. This study contributes to the optimization of SALDI-MS measurements and advances our understanding of energy transfer and sample molecule dissociation.

Observation of reversible and irreversible charge transfer processes in dye-monolayer graphene systems using Raman spectroscopy as a tool

Herein, we report the Raman spectroscopy of crystal violet (CV) and IR-780 Iodide molecules dispersed on the monolayer graphene film (MGF). In the CV-MGF system, the enhancement in the Raman scattering of CV molecules is observed irrespective of the location probed during the spectral measurements. This enhancement is due to the charge transfer from the MGF to CV molecules. However, in the case of the IR-780 Iodide – MGF system, the enhancement of Raman scattering of dye molecules or MGF is observed strongly depending upon the probed location. These observations indicate that the charge transfer is irreversible and reversible in the CV-MGF and IR-780 Iodide–MGF systems, respectively. Importantly, for the first time, this experimental study revealed that enhancing the Raman scattering of MGF is possible through the “chemical mechanism” with suitable dye molecules apart from the “electromagnetic mechanism” with plasmonic hot spots of the metal nanoparticles and photonic nanojets of single dielectric microparticles.

Comparative adsorption of cationic and anionic dye by using non-activated Black Plum seed biochar for aquatic phase: Isotherm, kinetic and thermodynamic studies

Industrial dye effluents play a major role in water pollution. Textile and leather industries are one of the important sectors that pollute the water by discharging many harmful cationic and anionic dyes during the dyeing process. This study aims to compare the dye removal efficiency of Black Plum seed biochar for the cationic and anionic dyes. The non-activated biochar was prepared through pyrolysis of Black Plum seed powder at 5700 C. The sample's surface chemistry was understood using various characterization techniques like Field Emission Scanning Electron Microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDS), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), Raman-Spectroscopy and Zeta-potential. The experiments were successfully performed by conducting a batch adsorption study at different parameters such as pH, concentration, contact time and temperature. The coefficients of different isotherms and kinetics models were evaluated for non-linear study and the thermodynamic model was also applied. The maximum adsorption capacity was obtained as 42.39 mg/g for Crystal Violet (CV) dye and 6.22 mg/g for Eosin Blue (EB) dye by using the Langmuir isotherm model. Hence, the Black Plum seed biochar (BPSB) has superior adsorption capacity for the cationic dye CV ( removal - 98%) as compared to the anionic dye EB ( removal - 65%) at optimum parameters. Therefore, it is concluded that the BPSB is a natural toxin-free biosorbent and it can be used for the remediation of dyes from industrial wastewater.

Mitochondrial calcium overload contributes to cannabinoid‐induced paraptosis in hormone‐responsive breast cancer cells

AbstractStudies have shown that natural products can induce paraptosis in tumour cell lines. Paraptosis is characterized by cytoplasmic vacuolation arising from the endoplasmic reticulum (ER) and mitochondria. The mechanism of paraptosis is unclear; however, dysregulation of Ca2+ homeostasis is believed to affect paraptosis induction. This study investigated the mechanism of cell death induced by a phytocannabinoid ratio in the MCF7 breast cancer cell line. The crystal violet assay was used to detect changes in viability and morphology changes were investigated using light and transmission electron microscopy. Various inhibitors, fluorescent staining with high‐content screening, and Western blot analysis were used to investigate different cell death mechanisms. The phytocannabinoid ratio induced significant cell death and cytoplasmic vacuolation in MCF7 cells; however, no apoptosis, necrosis, autophagy, or ferroptosis was detected. Vacuolation induced by phytocannabinoid treatment was inhibited by cycloheximide, suggesting paraptosis induction. The mechanism of paraptosis induction was investigated, and it was found that treatment (1) induced ER dilation and mitochondrial swelling, (2) induced significant ER stress and mitochondrial Ca2+ overload and dysfunction, which appeared to be mediated by the voltage‐dependent anion channel, and (3) significantly impaired all mitochondrial metabolic pathways. The data demonstrated that paraptosis induced by the cannabinoid ratio was mediated by Ca2+ flux from the ER to the mitochondria. These findings highlight a novel mechanism of cannabinoid‐induced cell death and emphasize the anti‐cancer potential of cannabinoid ratios, which exhibited enhanced effects compared to individual cannabinoids.

Increased antibiotic resistance of Pseudomonas aeruginosa isolates from chronic rhinosinusitis patients grown in anaerobic conditions.

In chronic rhinosinusitis (CRS), the congestion and blockage of the nose can cause anaerobic conditions within the sinus cavities which may promote the expression of virulence and antibiotic resistance genes in invading pathogens. Pseudomonas aeruginosa is a facultative anaerobic bacteria and causes severe recalcitrant CRS. In this study, we aimed to evaluate the antimicrobial resistance of P. aeruginosa isolates of CRS patients in planktonic and biofilm form grown in aerobic and anaerobic conditions. P. aeruginosa clinical isolates of CRS patients (n = 25) were grown in planktonic and biofilm form in aerobic and anaerobic conditions. Minimum inhibitory concentrations (MIC) of planktonic forms and minimum biofilm eradication concentrations (MBEC) were determined. Additionally, metabolic activity by fluorescein diacetate assay, biofilm biomass by crystal violet assay and eDNA concentration were assessed in both conditions. P. aeruginosa planktonic cells grown in anaerobic condition exhibited increased gentamicin resistance (p < .01), whereas P. aeruginosa biofilms grown in anaerobic condition displayed significantly increased MBEC values for gentamicin (p < .0001) and levofloxacin (p < .001). The metabolic activity of anaerobic biofilms was significantly higher compared with aerobic biofilms (p < .0001). However, the biofilm biomass of isolates grown in aerobic conditions was higher than anaerobic conditions (p < .5). P. aeruginosa isolates from CRS patients grown in anaerobic conditions showed significantly increased resistance to antibiotics with an increased metabolic activity but decreased biofilm biomass. NA.

Acorus calamus L. rhizome extract and its bioactive fraction exhibits antibacterial effect by modulating membrane permeability and fatty acid composition.

Ethnopharmacological relevanceIndia's ancient texts, the Charak Samhita and Sushruta Samhita, make reference to the traditional medicinal usage of Acorus calamus L. In India and China, it has long been used to cure stomach aches, cuts, diarrhea, and skin conditions. This ability of the rhizome is attributed to its antimicrobial properties. Research studies to date have shown its antimicrobial properties. However, scientific evidence on its mode of action is still lacking. Aim of the studyAcorus calamus L. rhizome extract and its bioactive fraction exhibits antibacterial effect by modulating membrane permeability and fatty acid composition. Material and methodThe secondary metabolites in the rhizome of A. calamus L. were extracted in hexane using Soxhlet apparatus. The ability of the extract to inhibit multidrug resistant bacterial isolates, namely Bacillus cereus, Escherichia coli, Acinetobacter baumannii, and Pseudomonas aeruginosa were evaluated using checkerboard assay. Further, the extract was purified using thin layer chromatography, gravity column chromatography, and combiflash chromatography. Structure elucidation of the active compound was done using GC-MS, FT-IR, and UV–Vis spectral scan. The mode of action of the bioactive fraction was determined. Bacterial membrane damage was analyzed using SEM, membrane permeability was determined using SYBR green I and PI dye, leakage of cytoplasmic contents were analyzed using Bradford assay and Fehling’s reagent. The ability to inhibit efflux pump of A. baumannii was determined using EtBr accumulation assay and β-lactamase inhibition was analyzed using nitrocefin as substrate. Also, the biofilm inhibition of B. cereus was determined using crystal violet dye. Moreover, the effect of the bioactive fraction on the fatty acid profile of the bacterial membrane was determined by GC-FAME analysis using 37 component FAME mix as standard. ResultsAcorus calamus L. rhizome hexane extract (AC-R-H) demonstrated broad-spectrum antibacterial activity against all the isolates tested. AC-R-H extract also significantly reduced the MIC of ampicillin against all tested bacteria, indicating its bacterial resistance modulating properties. The assay guided purification determined Asarone as the major compound present in the bioactive fraction (S-III-BAF). S-III-BAF was found to reduce the MIC of ampicillin against Escherichia coli (100–25 mg/mL), Pseudomonas aeruginosa (15–3.25 mg/mL), Acinetobacter baumannii (12.5–1.56 mg/ml), and Bacillus cereus (10–1.25 mg/mL). Further, it recorded synergistic activity with ampicillin against B. cereus (FICI = 0.365), P. aeruginosa (FICI = 0.456), and A. baumannii (FICI = 0.245). The mode of action of S-III-BAF can be attributed to its ability to disturb the membrane integrity, enhance membrane permeability, reduce biofilm formation, and possibly alter the fatty acid composition of the bacterial cell membranes. ConclusionThe bioactive fraction of AC-R-H extract containing Asarone as the active compound showed antibacterial activity and synergistic interactions with ampicillin against the tested bacterial isolates. Such activity can be attributed to the modulation of fatty acids present in bacterial membranes, which enhances membrane permeability and causes membrane damage.

Bifunctional titanium boron-phosphate glass containing Ag nanoparticles for the detection and photocatalysis of organic compounds

This study delves into the structural characterization of a composition comprising Ag-NPs/phosphate plasmonic glass. Additionally, it explores two applications aimed at addressing one of the numerous challenges facing the modern world. The continuous technological progress of society has led to the proliferation of chemicals in natural water sources, posing a significant threat to ecosystems due to their low concentrations, making them difficult to detect and remove. The findings presented herein showcase the potential of Ag-NPs/sodium/titanium-phosphate glasses as a promising solution for detecting and degrading organic pollutants in freshwater. To achieve this, Ag nanoparticles were integrated into the glass surface via the ion exchange method, followed by thermal treatment. Subsequently, the detection of crystal violet solutions, applied dropwise onto the sample surface, was successfully carried out using surface-enhanced Raman spectroscopy, reaching a detection limit as low as 10−6 M. Furthermore, the glass composition demonstrated heterogeneous photocatalytic properties for UV degradation of methylene blue, with enhanced photoactivity attributed to the presence of silver nanoparticles, resulting in a 111 % increase in the kinetic constant compared to unmodified glass. Thus, these newly developed Ag-NPs sodium titanium-phosphate glasses exhibit remarkable bifunctional capabilities, offering improved optical detection and efficient photodegradation of organic molecules.

Quorum-quenching enzyme Est816 assisted antibiotics against periodontitis induced by Aggregatibacter actinomycetemcomitans in rats.

Quorum-quenching enzyme Est816 hydrolyzes the lactone rings of N-acyl homoserine lactones, effectively blocking the biofilm formation and development of Gram-negative bacteria. However, its applications in the oral field is limited. This study aimed to evaluate the efficacy of enzyme Est816 in combination with antibiotics against periodontitis induced by Aggregatibacter actinomycetemcomitans in vitro and in vivo. The antimicrobial efficacy of enzyme Est816 in combination with minocycline, metronidazole, and amoxicillin was determined using the minimum inhibitory concentration test. The anti-biofilm effect of enzyme Est816 was assessed using scanning electron microscopy, live/dead bacterial staining, crystal violet staining, and real-time quantitative PCR. Biocompatibility of enzyme Est816 was assessed in human gingival fibroblasts (HGF) by staining. A rat model of periodontitis was established to evaluate the effect of enzyme Est816 combined with minocycline using micro-computed tomography and histological staining. Compared to minocycline, metronidazole, and amoxicillin treatment alone, simultaneous treatment with enzyme Est816 increased the sensitivity of biofilm bacteria to antibiotics. Enzyme Est816 with minocycline exhibited the highest rate of biofilm clearance and high biocompatibility. Moreover, the combination of enzyme Est816 with antibiotics improved the antibiofilm effects of the antibiotics synergistically, reducing the expression of the virulence factor leukotoxin gene (ltxA) and fimbria-associated gene (rcpA). Likewise, the combination of enzyme Est816 with minocycline exhibited a remarkable inhibitory effect on bone resorption and inflammation damage in a rat model of periodontitis. The combination of enzyme Est816 with antibiotics represents a prospective anti-biofilm strategy with the potential to treat periodontitis.

Desirability function and Box-Behnken design optimization for crystal violet dye adsorption by palm date stone activated carbon

Desirability function and Box-Behnken design optimization for crystal violet dye adsorption by palm date stone activated carbon

Discoloration of textile dyes by spent mushroom substrate of Agaricus bisporus

The textile industry discharges up to 5 % of their dyes in aqueous effluents. Here, use of spent mushroom substrate (SMS) of commercial white button mushroom production and its aqueous extract, SMS tea, was assessed to remove textile dyes from water. A total of 30–90 % and 5–85 % of the dyes was removed after a 24 h incubation in SMS and SMS tea, respectively. Removal of malachite green and remazol brilliant blue R was similar in SMS and its tea. In contrast, removal of crystal violet, orange G, and rose bengal was higher in SMS, explained by sorption to SMS and by the role of non-water-extractable SMS components in discoloration. Heat-treating SMS and its tea, thereby inactivating enzymes, reduced dye removal to 8–58 % and 0–31 %, respectively, indicating that dyes are removed by both enzymatic and non-enzymatic activities. Together, SMS of white button mushroom production has high potential to treat textile-dye-polluted aqueous effluents.

Starch Sodium Octenylsuccinate as a New Type of Stabilizer in the Synthesis of Catalytically Active Gold Nanostructures.

Here, starch derivatives, i.e., sodium starch octenylsuccinate (OSA starch, hereinafter referred to as OSA), were employed as both reducing and stabilizing agents for the unique, inexpensive, and simple synthesis of gold nanoparticles (OSA-AuNPs) in an aqueous solution with gold salt. The obtained OSA-AuNPs were characterized by UV-vis spectrophotometry, transmission electron microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The catalytic activity of the obtained gold colloids was studied in the reduction of organic dyes, including methylene blue (C.I. Basic Blue 9) and rhodamine B (C.I. Basic Violet 10), and food coloring, including tartrazine (E102) and azorubine (E122), by sodium borohydride. Moreover, OSA-AuNPs were utilized as signal amplifiers in surface-enhanced Raman spectroscopy. The obtained results confirmed that gold nanoparticles can be used as effective catalysts in reduction reactions of selected organic dyes, as well as signal enhancers in the SERS technique.

Study on Preparation of Calcium-Based Modified Coal Gangue and Its Adsorption Dye Characteristics.

Efficient and thorough treatment of dye wastewater is essential to achieve ecological harmony. In this study, a new type of calcium-based modified coal gangue (Ca-CG) was prepared by using solid waste coal gangue as raw material and a CaCl2 modifier, which was used for the removal of malachite green, methylene blue, crystal violet, methyl violet and other dyes in water. When the dosage of Ca-CG was 1-5 g/L, the dosage of Ca-CG was the main factor affecting the dye adsorption effect. The adsorption effects of Ca-CG on four dyes were as follows: malachite green > crystal violet > methylene blue > methyl violet. Kinetics, isotherms and thermodynamic analysis showed that the adsorption of malachite green, methyl blue, crystal violet and methyl violet by Ca-CG fitted the second-order kinetic model, and adsorption with chemical reaction is the main process. The adsorption of four dyes by Ca-CG conformed to the Freundlich model, which is dominated by multi-molecular layer adsorption, and the adsorption was easy to carry out. The adsorption process of Ca-CG on the four dyes was spontaneous. The results of FTIR, XRD and SEM showed that the calcium-based materials such as lipscombite and dolomite were the key to the adsorption of malachite green by Ca-CG, and the main mechanisms for the adsorption of malachite green by Ca-CG are surface precipitation, electrostatic action, and chelation reaction. Ca-CG adsorption has great potential for the removal of dye wastewater.

Evaluation of structural parameters of monoclinic nanocrystalline CuO and study of sunlight-driven photocatalytic dye degradation, antimicrobial and antioxidant potential

Highly pure, crystalline and spherical-shaped Copper oxide nanoparticles (NPs) have been synthesized via facile chemical coprecipitation. Various models including the Scherrer, Monshi-Scherrer, Williamson-Hall, Size-Strain Plot and Halder-Wagner method have been applied to study the crystal structure characteristics. The lattice parameters associated with the monoclinic crystal lattice of CuO NPs were estimated to be a = 4.69 Å, b = 3.41 Å, c = 5.14 Å and β = 99.87(degree), unit cell volume V = 81.35Å3 and cell density dx = 6.49 g/cm3. The photocatalytic dye degradation proficiency at 20 mg/l CuO concentration and 120 min sunlight exposure results the order of percentage dye degradation Malachite Green (88.4%) > Crystal Violet (70.8%) > Eosin Yellow (70.2%) > Methylene Blue (54.08%) dyes. The antimicrobial activity assessment was done against the broad-spectrum pathogenic microbes unveiled the exceptional microbial controlling capability of CuO NPs. Furthermore, the antioxidant activity test demonstrated the potential free radical scavenging activity of CuO NPs with an IC50 value of 47.733 µg/ml. Highlights Synthesis of pure and spherical shaped nanocrystalline CuO was done by using low cost and facile chemical coprecipitation method. XRD, FTIR, FESEM, EDX, UV-Vis, and Raman spectroscopic techniques were used for characterization purpose. The structural and crystallographic parameters of monoclinic crystal structure of CuO NPs were evaluated successfully. The photocatalytic performance of CuO NPs follow the percentage dye degradation order as MG (88.4%) > CV (70.8%) > EY (70.20%) > MB (54.08%) after 120 minutes of sunlight exposure. CuO NPs exhibit promising antifungal activity against COVID-19 associated Pulmonary Aspergillosis (CAPA) causing pathogenic fung. CuO NPs show potential DPPH free radical scavenging activity with an IC50 value of 47.733 µg/ml.

Antifungal activity of nisin against clinical isolates of azole-resistant Candida tropicalis.

The rapid emergence of invasive infections caused by azole-resistant Candida tropicalis has become a public health concern, and there is an urgent need for alternative treatment strategies. Studies have demonstrated the antibacterial effects of nisin, a well-known peptide naturally produced by Lactococcus lactis subsp. lactis. However, there is scant information about the antifungal effect of nisin against C. tropicalis. The present study aims to investigate the in vitro antifungal activity of nisin against clinical isolates of azole-resistant C. tropicalis strains, as well as its inhibitory effect on biofilm formation. A total of 35 C. tropicalis strains isolated from patients with invasive fungal infections were divided into the azole-resistant group and the azole-sensitive group, containing 21 and 14 strains, respectively. The relative expression levels of the ERG11 and UPC2 genes in the azole-resistant group were higher than those in the azole-sensitive group (p < 0.0001), while no significant differences were observed in the expression levels of the MDR1 and CDR1 genes. The minimum inhibitory concentration of nisin against C. tropicalis ranged from 2 to 8 μg/mL. Nisin treatment inhibited the growth of azole-resistant C. tropicalis, with over a four-fold reduction in OD600 nm values observed at the 8-h time point, while it promoted the transition of C. tropicalis from the spore phase to the hyphal phase, as observed on cryo-scanning electron microscopy. The results of biofilm quantification using crystal violet staining indicated a significant decrease in OD570 nm values in the nisin-treated group compared to the controls (p < 0.0001). Among the 21 azole-resistant C. tropicalis strains, the biofilm formation was inhibited in 17 strains (17/21, 81%), and more than 85% inhibition of biofilm formation was observed in the representative strains. With regard to the molecular mechanisms, the expression of the BCR1 and UPC2 genes in the azole-resistant strains was down-regulated on nisin treatment (p < 0.05). In conclusion, we demonstrated, for the first time, that nisin has antifungal activity and significant anti-biofilm activity against clinical isolates of azole-resistant C. tropicalis strains. Based on the findings, nisin could be a promising alternative antifungal agent for combating azole-resistant C. tropicalis infections.

Biochar with enhanced performance prepared based on “graphite-structure regulation” conjecture designed to effectively control water pollution

In this work, corn straw was used as raw material, Hummers method and activation were used to adjust the graphite structure in biochar, and preparing straw based biochar (H-BCS) with ultra-high specific surface area (3441.80 m2/g), highly total pore volume (1.9859 cm3/g), and further enhanced physicochemical properties. Compared with untreated straw biochar (BCS), the specific surface area and total pore volume of H-BCS were increased by 47.24 % and 55.85 %, respectively. H-BCS showed good removal ability in subsequent experiments by using chloramphenicol (CP), hexavalent chromium (Cr6+), and crystal violet (CV) as adsorption models. In addition, the adsorption capacities of H-BCS (CP: 1396.30 mg/g, Cr6+: 218.40 mg/g, and CV: 1246.24 mg/g) are not only higher than most adsorbents, even after undergoing 5 cycles of regeneration, its adsorption capacity remains above 80 %, indicating significant potential for practical applications. In addition, we also speculated and analyzed the conjecture about the “graphite-structure regulation” during the preparation process, and finally discussed the possible mechanism during the adsorption processes. We hope this work could provide a new strategy to solve the restriction of biochar performance by further exploring the regulation of graphite structure in carbon materials.

Evaluation of quantification methods to determine photodynamic action on mono- and dual-species bacterial biofilms.

The effect of photodynamic inactivation (PDI) sensitized by 5,10,15,20-tetra(4-N,N,N-trimethylammoniophenyl)porphyrin (TMAP4+) on different components of mono- and dual-species biofilms of Staphylococcus aureus and Escherichia coli was determined by different methods. First, the plate count technique showed that TMAP4+-PDI was more effective on S. aureus than E. coli biofilm. However, crystal violet staining revealed no significant differences between before and after PDI biofilms of both bacteria. On the other hand, the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide method indicated a reduction in viable cells as the light exposure time increases in both, mono- and dual-species biofilms. Furthermore, it was determined that as the irradiation time increases, the amount of extracellular polymeric substances present in the biofilms decreased. This effect was presented in both strains and in the mixed biofilm, being more evident in S. aureus mono-specie biofilm. Finally, scanning electron microscopy analysis showed a decrease in the number of cells forming the biofilm after photosensitization treatments. This information makes it possible to determine whether the photodynamic action is based on damage to metabolic activity, extracellular matrix and/or biomass, which may be useful in establishing a fully effective PDI protocol for the treatment of microorganisms growing as biofilms.

Activated carbon cellulose acetate based as effective adsorbent of contaminants from water

Various methods can be employed to remove pollutants from wastewater. Among these, adsorption using activated carbon materials has proven effective. This work proposes the use of a hazardous waste made from a semisynthetic polymer, cellulose acetate from cigarette butts, as raw material to produce activated carbons (AC). Four adsorbents were prepared from dirty and clean cigarette butts; two chemically activated carbons using phosphoric acid and two physically activated carbons using water vapor at 623 K. The carbons were characterized using FTIR, SEM, Nitrogen adsorption, and their points of zero charge. AC produced showed high potential as adsorbents for cleaning hazardous dyes from aqueous solutions. Adsorption isotherms were constructed for the textile dyes on the carbons, and these data were treated using Langmuir's equation to quantitatively describe the adsorption process. The adsorption of dyes with an initial concentration of 300 mg dm−3 showed adsorption percentages closed to the 100% for cationic dyes, while these oscillated between 40% and 100% for anionic dyes with the four activated carbons. The highest values of monolayer capacity (am) were achieved with the activated carbon prepared from cellulose acetate without prior treatment. Monolayer capacity with values ranging from 185 to 277 mg g−1 for cationic dyes and 126–178 mg g−1 for anionic dyes were obtained. Therefore, any waste of cellulose acetate can be used to obtain activated carbons with excellent adsorption capacities for dyes Methylene Blue, Crystal Violet, Malachite Green, Sirius Turquoise and Fluorescein.

Solar light driven enhanced photocatalytic efficiency of Graphene based composite of co-doped Bismuth Ferrite (Ba0.5 Bi0.5 Nd0.5 Fe1.5 O3/Gr0.375) for Crystal Violet and Paracetamol

Different dyes and drugs used in industries when released without any treatment in water bodies cause water pollution. There is a need of synthesizing cost-effective and efficient photocatalyst for their degradation. Herein, Ba and Nd co-doped bismuth ferrite BFO (Ba0.5 Bi0.5 Nd0.5 Fe1.5 O3) and BFO@G (Ba0.5 Bi0.5 Nd0.5 Fe1.5 O3/Gr0.375) were successfully fabricated. X-ray Diffraction and Fourier Transform Infrared Spectroscopy were performed to confirm the synthesis of samples. Electrochemical measurements were carried out to further evaluate the characteristics of fabricated catalysts and Rct values of 3.90 Ω and 2.06 Ω were observed for BFO and BFO@G. BFO@G showed 72.72 % degradation of CV and 80.26 % of PC. The composite material showed enhanced performance due to the integration of graphene which provide additional conductive pathways and reduces the rate of electron-hole pair recombination. This research contributes valuable insights into the development of efficient photocatalytic materials for environmental applications.

Human-Derived collagen hydrogel as an antibiotic vehicle for topical treatment of bacterial biofilms.

The complexity of chronic wounds creates difficulty in effective treatments, leading to prolonged care and significant morbidity. Additionally, these wounds are incredibly prone to bacterial biofilm development, further complicating treatment. The current standard treatment of colonized superficial wounds, debridement with intermittent systemic antibiotics, can lead to systemic side-effects and often fails to directly target the bacterial biofilm. Furthermore, standard of care dressings do not directly provide adequate antimicrobial properties. This study aims to assess the capacity of human-derived collagen hydrogel to provide sustained antibiotic release to disrupt bacterial biofilms and decrease bacterial load while maintaining host cell viability and scaffold integrity. Human collagen harvested from flexor tendons underwent processing to yield a gellable liquid, and subsequently was combined with varying concentrations of gentamicin (50-500 mg/L) or clindamycin (10-100 mg/L). The elution kinetics of antibiotics from the hydrogel were analyzed using liquid chromatography-mass spectrometry. The gel was used to topically treat Methicillin-resistant Staphylococcus aureus (MRSA) and Clostridium perfringens in established Kirby-Bauer and Crystal Violet models to assess the efficacy of bacterial inhibition. 2D mammalian cell monolayers were topically treated, and cell death was quantified to assess cytotoxicity. Bacteria-enhanced in vitro scratch assays were treated with antibiotic-embedded hydrogel and imaged over time to assess cell death and mobility. Collagen hydrogel embedded with antibiotics (cHG+abx) demonstrated sustained antibiotic release for up to 48 hours with successful inhibition of both MRSA and C. perfringens biofilms, while remaining bioactive up to 72 hours. Administration of cHG+abx with antibiotic concentrations up to 100X minimum inhibitory concentration was found to be non-toxic and facilitated mammalian cell migration in an in vitro scratch model. Collagen hydrogel is a promising pharmaceutical delivery vehicle that allows for safe, precise bacterial targeting for effective bacterial inhibition in a pro-regenerative scaffold.

Antibacterial activity of Hungarian varietal honeys against respiratory pathogens as a function of storage time

Today, antibiotic therapies that previously worked well against certain bacteria due to their natural sensitivity, are becoming less effective. Honey has been proven to inhibit the biofilm formation of some respiratory bacteria, however few data are available on how the storage time affects the antibacterial effect. The activity of black locust, goldenrod, linden and sunflower honeys from three consecutive years (2020, 2021, 2022) was analyzed in 2022 against Gram-negative (Haemophilus influenzae, H. parainfluenzae, Pseudomonas aeruginosa) and Gram-positive (Streptococcus pneumoniae) bacteria using in vitro microbiological methods. After determining the physicochemical parameters of honey, broth microdilution was applied to determine the minimum inhibitory concentration of each honey type against each bacterium, and crystal violet assay was used to test their antibiofilm effect. The possible mechanism of action was explored with membrane degradation test, while structural changes were illustrated with scanning electron microscopy. Honeys stored for one or two years were darker than fresh honeys, while older honeys had significantly lower antibacterial activity. The most remarkable inhibitory effect was exerted by linden and sunflower honeys, and P. aeruginosa proved to be the most resistant bacterium. Based on our results, honey intended for medicinal purposes should be used as fresh as possible during a treatment.