Chiral Selector Concentration Research Articles

Synthesis and application of clindamycin succinate as a novel chiral selector for capillary electrophoresis

A novel chiral selector, clindamycin succinate, was synthesized and first used as a chiral selector in capillary electrophoresis (CE). The chiral resolution ability of this kind of clindamycin derivation was studied by CE using some racemic drugs as model analytes. From the experimental results, it was found that both resolution and selectivity of the selector were dependent on the following parameters: concentration of chiral selectors, pH of the running buffer, temperature of the capillary column, applied voltage and organic modifier used. The results show that the chiral selector possesses high resolution toward some racemic drugs, including ofloxacin, chlorphenamine, tryptophan, propranolol, sotalol and metoprolol. Excellent chiral resolution of these tested drugs was achieved under the optimal conditions of 50 mM clindamycin succinate, 10% MeOH v/v, 50 mM Tris buffer, pH 4.0, at 22 kV and 20 °C within 25 min.

Enantioseparation of phenylsuccinic acid by high speed counter-current chromatography using hydroxypropyl-β-cyclodextrin as chiral selector

High speed counter-current chromatography (HSCCC) was successfully applied to resolution of phenylsuccinic acid (PSA) with hydroxypropyl-β-cyclodextrin (HP-β-CD) as chiral selector (CS). The two-phase solvent system composed of n-hexane–methyl tert-butyl ether–0.1 mol L −1 phosphate buffer solution with pH = 2.51 (0.5:1.5:2, v/v/v) was selected. Influence factors involved in the chiral separation were investigated, including the concentration of chiral selector, pH value of the aqueous phase, the separation temperature, and the thermodynamic parameters of inclusion complex were calculated. The complex formation constants were determined using analytical instrument. Two HSCCC elution modes were studied and peak resolution equation was discussed. Under optimum separation conditions, 712 mg of PSA racemate was separated using preparative apparatus. The purities of both of the fractions including (+)-PSA and (−)-PSA from the preparative CCC separation were over 98.5% determined by HPLC and enantiomeric excess of (+)-PSA and (−)-PSA reached 97.6% and 98.6%, respectively. Recovery for the target compounds from the CCC fractions reached 80–82% yielding 285 mg of (+)-PSA and 292 mg of (−)-PSA.

Determination of sodium benzoate by chiral ligand exchange CE based on its inhibitory activity in d-amino acid oxidase mediated oxidation of d-serine

A novel quantitative approach for the determination of sodium benzoate (SB) was proposed by the kinetic study about its competitive inhibitory efficiency to d-amino acid oxidase (DAAO) activity with a chiral ligand exchange capillary electrophoresis (CE) method, in which the Zn(II)- l-prolinamide complex was chosen as a novel chiral selector. After the optimization of buffer pH and the chiral selector concentration this chiral ligand exchange CE method was employed to determine labeled d, l-Serine with good linearity ( r 2 ≥ 0.995), efficient recovery (95.6–100.9%) and remarkable reproducibility (RSD ≤ 1.2%). This chiral separation method was further used to observe DAAO activity through the determination of d-Serine concentration variation after being incubated with DAAO and obtain the sigmoidal inhibitory curve of SB to DAAO activity. The ascending part of this inhibitory curve was linearly fitted in a limited range for SB from 2.0 to 200 μM with an appropriate coefficient of determination ( R 2 = 0.990). The linearity was then validated to be a promising method for the analysis of SB with the standout merits of high selectivity and adjustable detection range. Furthermore, this proposed method was used for the pharmacokinetics study of SB.

Chiral separation and quantitation of cetirizine and hydroxyzine by maltodextrin‐mediated CE in human plasma: Effect of zwitterionic property of cetirizine on enantioseparation

In the present study, a very simple CE method for chiral separation and quantitation of zwitterionic cetirizine (CTZ), as the main metabolite of hydroxyzine (HZ), and HZ has been developed. In addition, the effect of zwitterionic property of CTZ on enantioseparation was investigated. Maltodextrin, a linear polysaccharide, as a chiral selector was used and several parameters affecting the separation such as pH of BGE, concentration of chiral selector and applied voltage were studied. The best BGE conditions for CTZ and HZ enantiomers were optimized as 75 mM sodium phosphate solution at pH of 2.0, containing 5% w/v maltodextrin. Results showed that, compared to HZ, pH of BGE was an effective parameter in enantioseparation of CTZ due to the zwitterionic property of CTZ. The linear range of the method was over 30-1200 ng/mL for all enantiomers of CTZ and HZ. The quantification and detection limits (S/N=3) of all enantiomers were 30 and 10 ng/mL, respectively. The method was used to quantitative enantioseparation of CTZ and HZ in spiked human plasma.

Development and validation of a capillary electrophoresis method for the enantiomeric purity determination of RS86017 using experimental design

A selective capillary electrophoresis method for determination of enantiomeric purity of RS86017, a new antiarrhythmic agent with two chiral centers, was developed and validated using sulfobutyl ether-β-cyclodextrin as chiral selector. The concentration of the chiral selector and organic modifier, pH of background electrolyte (BGE), capillary temperature, and applied voltage were systematically optimized by using orthogonal design and concentration of chiral selector was further optimized. The optimal conditions included 25 mM phosphate buffer at pH 8.0, containing 28 mg/mL sulfobutyl ether-β-cyclodextrin and 20% acetonitrile as running buffer, an applied voltage of 22 kV, and a temperature of 20 °C. The detection wavelength was 206 nm. The obtained method was capable of separating RS86017 from its potential chiral impurities, the S,R-enantiomer, the R,R-diastereomer and the S,S-diastereomer with a short analysis time of 10 min. The separation was validated with respect to its selectivity, repeatability, linearity, precision, accuracy, limits of detection (LOD), limits of quantitation (LOQ) and robustness testing. The LODs and LOQs were 0.8 μg/mL and 2.5 μg/mL for all isomers of RS86017, respectively. Finally, the method was used to investigate the chiral purity of RS86017 in bulk samples.

Azithromycin as a new chiral selector in capillary electrophoresis

In capillary electrophoresis (CE), separation of enantiomers of a chiral compound can be achieved through the chiral interactions and/or complex formation between the chiral selector and the enantiomeric analytes on leaving their diastereomeric forms with different stability constants and hence different mobilities. A great number of chiral selectors have been employed in CE and among them macrocyclic antibiotics exhibited excellent enantioselective properties towards a wide number of racemic compounds. The use of azithromycin (AZM) as a chiral selector has not been reported previously. This work reports the use of AZM as a chiral selector for the enantiomeric separations of five chiral drugs and one amino acid (tryptophan) in CE. The enantioseparation is carried out using polar organic mixtures of acetonitrile (ACN), methanol (MeOH), acetic acid and triethylamine as run buffer. The influences of the chiral selector concentration, ACN/MeOH ratio, applied voltage and capillary temperature on enantioseparation are investigated. The results show that AZM is a viable chiral selector in CE for the enantioseparation of the type of chiral drugs investigated.

Enantioseparation of lomefloxacin hydrochloride by high-speed counter-current chromatography using sulfated-β-cyclodextrin as a chiral selector

Enantiomers of lomefloxacin hydrochloride were separated by high-speed counter-current chromatography (HSCCC) using sulfated-β-cyclodextrin as a chiral selector (CS). The separation was performed with a two-phase solvent system composed of ethyl acetate–methanol–water (10:1:10, v/v) containing CS at 0–60 mmol/l in a head-to-tail elution mode, while obtained fractions were identified by polarimeter and spectropolarimeter. The results show that the concentration of the CS in the system strongly affects the peak resolution (Rs). As the concentration of CS increases, the Rs first increases reaching the maximum at 50 mmol/l and then decreases. When the CS concentration is kept constant in the solvent systems, the Rs decreases as the concentration of the lomefloxacin hydrochloride increases. The overall results of our studies indicated that sulfated-β-cyclodextrin is very useful for the chiral separation by HSCCC.

Enantioselective analysis of ofloxacin and ornidazole in pharmaceutical formulations by capillary electrophoresis using single chiral selector and computational calculation of their inclusion complexes

A capillary electrophoretic method for the separation of the enantiomers of both ofloxacin and ornidazole is described. Several parameters affecting the separation were studied, including the type and concentration of chiral selector, buffer pH, voltage and temperature. Good chiral separation of the racemic mixtures was achieved in less than 16 min with resolution factors Rs = 5.45 and 6.28 for ofloxacin and ornidazole enantiomers, respectively. Separation was conducted using a bare fused-silica capillary and a background electrolyte (BGE) of 50 mM H 3PO 4–1 M tris solution; pH 1.85; containing 30 mg mL −1 of sulfated-β-cyclodextrin (S-β-CD). The separation was carried out in reversed polarity mode at 25 °C, 18 kV, detection wavelength at 230 nm and using hydrodynamic injection for 15 s. Acceptable validation criteria for selectivity, linearity, precision, and accuracy were studied. The limits of detection (LOD) and limits of quantitation (LOQ) of the enantiomers (ofloxacin enantiomer 1 (OF-E1), ofloxacin enantiomer 2 (OF-E2), ornidazole enantiomer 1 (OR-E1) and ornidazole enantiomer 2 (OR-E2)) were (0.52, 0.46, 0.54, 0.89) and (1.59, 1.40, 3.07, 2.70) μg mL −1, respectively. The proposed method was successfully applied to the assay of enantiomers of both ofloxacin and ornidazole in pharmaceutical formulations. The computational calculations for the enantiomeric inclusion complexes rationalized the reasons for the different migration times between the ofloxacin and ornidazole enantiomers.

Synthesis and application of a novel single‐isomer mono‐6‐deoxy‐6‐((2S,3S)‐(+)‐2,3‐O‐isopropylidene‐1,4‐tetramethylenediamine)‐β‐cyclodextrin as chiral selector in capillary electrophoresis

A novel single isomer of positively charged β-cyclodextrin, mono-6-deoxy-6-((2S,3S)-(+)-2,3-O-isopropylidene-1,4-tetramethylenediamine)-β-CD (MIPTACD) was designed and synthesized in seven steps starting from commercially available (2R,3R)-tartaric acid. The chiral resolution abilities of the new cationic chiral selector were studied by capillary electrophoresis using 10 different dansyl (Dns)-amino acids and N-acetylphenylalanine (N-Ac-Phe) as model analytes. The effects of running buffer pH and chiral selector concentration on the separation selectivity, resolutions, and migration times of analytes were studied in detail. MIPTACD shows a very good chiral recognition ability even at very low concentrations at the investigated pH values, as shown by the very large values of selectivity and resolution towards amino acids enantiomers to be assessed.

Preparative enantioseparation of (±)-N-(3,4-cis-3-decyl-1,2,3,4-tetrahydrophenanthren-4-yl)-3,5-dinitrobenzamide by centrifugal partition chromatography

The racemic compound (+/-)-N-(3,4-cis-3-decyl-1,2,3,4-tetrahydrophenanthren-4-yl)-3,5-dinitrobenzamide ((+/-)-1), an analogue of increased lipophilicity of the chiral selector (CS) contained in the Whelk-O HPLC chiral stationary phase (CSP) has been resolved into its enantiomers by applying centrifugal partition chromatography (CPC). Considering the known enantioselectivity of the Whelk-O CS for naproxen, and the reciprocity concept in enantioseparation, (S)-naproxen related compounds were tested as CSs. In the search for an adequate solvent system, the partition behaviour of the two solutes, CS and racemate, has been studied using several biphasic solvent mixtures. The optimal CS concentration and sample loading capacity were determined in the chosen solvent system. The search for an appropriate CS and solvent system, the scale-up and optimization of the enantiomer separation by CPC, as well as the rationale for the unexpected elution order of enantiomers, are here described. The comparison of the preparative CPC separation achieved with that in HPLC, using a CSP containing an analogous CS, resulted favourable to the former in terms of loading capacity, solvent consumption and throughput.

Synthesis and examination of sulfated cyclofructans as a novel class of chiral selectors for CE

Cyclofructans (CFs) are a class of cyclic oligosaccharides with a crown ether skeleton. No enantioseparations have previously been reported using this class of chiral oligosaccharides in chromatography or electrophoresis. CFs and their sulfated derivatives were examined as chiral selectors using CE. The native CFs showed no enantioselectivity toward any tested compounds, while the sulfated CFs showed exceptional selectivity toward many cationic analytes, including primary, secondary, and tertiary amines and amino acids. Enantiomeric resolution factors as high as 15.4 were achieved within short analysis times (generally below 10 min). The effect of buffer type, buffer concentration, buffer pH, chiral selector concentration and organic modifier concentration was examined and optimized.

Mathematical Approach by a Selectivity Model for Rationalization of pH- and Selector Concentration-Dependent Reversal of the Enantiomer Migration Order in Capillary Electrophoresis

A separation selectivity model for capillary electrophoresis enantioseparations of weak bases in the presence of uncharged chiral selectors was described as a function of buffer pH and chiral selector concentration. On the basis of the selectivity at the extreme pH and selector concentration values, 15 principal cases could be distinguished describing the migration behavior of the analytes when increasing either pH or selector concentration. A pH-dependent reversal of the enantiomer migration order can be observed (1) when the complex mobility ratio is reversed due to an enantioselective complexation-induced pK(a)-shift, (2) in the case of an inversion of the ratio of the mobilities of the analyte-selector complex and the free analyte due to significantly weaker complexation of the neutral species, and (3) in the case of opposite chiral recognition of the protonated and uncharged species by the chiral selector. Reversal of enantiomer migration order as a function of the selector concentration at a fixed buffer pH is caused by the opposing effects of complexation constants and complex mobilities at the respective pH value. The model was applied to rationalize the enantioseparations of dipeptides, especially the pH-dependent reversal of the migration order of the LL- and DD-enantiomers of Ala-Tyr in the presence of heptakis-(2,6-di-O-methyl)-beta-cyclodextrin as the chiral selector based on the complexation constants of the protonated and zwitterionic forms of the analytes.

Study of a new chiral selector: Sodium arsenyl-( l)-(+) tartrate for capillary electrophoresis

Sodium arsenyl-( l)-(+) tartrate (Na 2[As 2(+)-tart 2]·3H 2O) was examined and evaluated as a chiral selector using capillary electrophoresis. This chiral selector showed enantioselective associations with many cationic analytes, including primary, secondary, and tertiary amines. Also, baseline separations of ruthenium(II) polypyridyl complexes were achieved within 10 min. The effect of buffer type, chiral selector concentration, voltage applied, buffer concentration, buffer pH and organic modifier concentration were examined and optimized.

Enantioselective determination of modafinil in pharmaceutical formulations by capillary electrophoresis, and computational calculation of their inclusion complexes

A fast capillary electrophoretic method is described for the separation and determination of the enantiomers of the novel wake-promoting agent, modafinil. Several parameters affecting the separation were studied, including the type and concentration of chiral selector, buffer pH, buffer concentration, voltage and temperature. Good chiral separation of the racemic mixture was achieved in less than 5 min with resolution factor Rs = 2.51, using a bare fused-silica capillary and a background electrolyte (BGE) of 25 mM H3PO4−1 M tris solution; pH 8.0; containing 30 mg mL−1 of sulfated-β-cyclodextrin (S-β-CD). The separation was carried out in normal polarity mode at 25 ◦C, 18 kV and using hydrostatic injection. Acceptable validation criteria for selectivity, linearity, precision, and accuracy were included. The developed method was successfully applied to the assay of enantiomers of modafinil in pharmaceutical formulations. The computational calculations for the enantiomeric inclusion complexes rationalized the reasons for the different migration times between the modafinil enantiomers.

Effect of the nature of the single‐isomer anionic CD and the BGE composition on the enantiomeric separation of β‐blockers in NACE

The separation of ten beta-blockers has been investigated in NACE systems using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-CD (HDMS-beta-CD) and heptakis(2,3-di-O-acetyl-6-O-sulfo)-beta-CD (HDAS-beta-CD). The influence on enantioresolution, mobility difference and selectivity of the nature of both anionic CD and BGE anion as well as their concentrations were studied by means of a multivariate approach. A D-optimal design with 25 experimental points was applied. For all studied analytes, the enantiomeric resolution was shown to be significantly influenced by both CD nature and concentration. Except for two compounds, HDAS-beta-CD was found to give higher enantioresolution values than HDMS-beta-CD. The best enantioseparation for all compounds was achieved in the presence of a high chiral selector concentration and for most of them at a low BGE anion concentration. For each investigated compound, operating conditions leading to the best enantiomeric resolution were deduced. A generic NACE system was then recommended, namely 10 mM ammonium acetate and 40 mM HDAS-beta-CD in methanol acidified with 0.75 M formic acid. This generic system was able to completely resolve the enantiomers of all beta-blockers, with a R(s) value of at least 4. Finally, the optimal conditions obtained modelling resolution, mobility difference and selectivity were compared.

Chiral analysis of anti‐acquired immunodeficiency syndrome drug, 9‐(R)‐[2‐(phosphonomethoxy)propyl]adenine (tenofovir), and related antiviral acyclic nucleoside phosphonates by CE using β‐CD as chiral selector

A new CZE method has been developed for chiral analysis of an important anti-acquired immunodeficiency syndrome drug, 9-(R)-[2-(phosphonomethoxy)propyl]adenine ((R)-PMPA, tenofovir), and six related antiviral acyclic nucleoside phosphonates using beta-CD as a chiral selector. The influence of the composition, concentration and pH of the BGE and the type and concentration of chiral selector on enantiomer resolution was investigated. Complete separations of (R,S)-enantiomers of PMPA with very good resolution (R(s)=1.50-3.64) were achieved within a short time (4-15 min) in 20-50 mM sodium borate or sodium tetraborate BGEs, pH 10.0, at 20 mg/mL concentration of beta-CD. (R,S)-enantiomers of five similar PMPA analogs containing purine bases (adenine, diaminopurine or guanine) and hydroxyl or fluor substituents at C3 carbon atom of propyl chain were baseline separated within 10-17 min in 35 mM sodium tetraborate BGE, pH 10.0, at 20 mg/mL beta-CD concentration. Another important antiviral used by acquired immunodeficiency syndrome patients, derived from pyrimidine base cytosine, 1-(S)-[3-hydroxy-2-(phosphonomethoxy)propyl]cytosine (cidofovir), and the (R)-enantiomer of this drug were successfully separated in 50 mM sodium tetraborate BGE, pH 10.5, at 20 mg/mL beta-CD concentration within 45 min. Using the UV-absorption detection at 206 nm, the concentration detection limits of the analyzed acyclic nucleoside phosphonates were determined in the submicromolar to micromolar range (0.15-2.51 microg/mL level).

Enantioselective determination of thyroxine enantiomers by ligand‐exchange CE with UV absorbance and ICP‐MS detection

A simple CE method has been developed for the separation and determination of thyroxine (T4) enantiomers in pharmaceutical formulations. The method was based on ligand-exchange mechanism using a Cu(II)/L-proline complex as chiral selector. The effects of different parameters affecting separation such as chiral selector concentration, organic additive, buffer pH and temperature were investigated. A baseline separation of the two enantiomers was obtained at a Cu(II)/L-proline ratio of 1:8 in a borate buffer (15 mmol/L, pH 9.6) containing 10% v/v acetonitrile. Under the optimized conditions, precision linearity range and detection limits of the developed enantioselective CE method were evaluated and compared using two different detection systems: conventional UV detection at 226 nm and iodine (127I)specific detection ("chiral speciation") with ICP-MS. Both methodologies show adequate analytical performance characteristics with detection limits around 0.30 microg/mL for each enantiomer of T4. Finally, a levothroid pharmaceutical formulation sample was successfully analyzed using both developed methods CE-UV and CE-ICP-MS.

Enantioselective Separation of Basic Drugs by CE with Polygalacturonic Acid as a Novel Chiral Selector

Polygalacturonic acid, a linear high molecular weight homopolysaccharide was investigated as a chiral selector in capillary zone electrophoresis for the separation of enantiomers of basic drugs. The choices of running buffer pH and concentration of chiral selector were found to be important for the improvement of enantioselectivity. The effects of background electrolyte concentration and the capillary temperature on the separation were also examined. Enantioseparations were carried out in the acidic conditions using 1.5% polygalacturonic acid (w/v) in a 40 mM phosphate buffer under an applied voltage of 15 kV. The optimization of these separations was dependent on the nature of the analytes and could be achieved by the proper choice of experimental conditions. A brief mechanism of enantiorecognition by polygalacturonic acid was also given.

Synthesis and application of a novel single-isomer mono-6-deoxy-6-(3R,4R-dihydroxypyrrolidine)-β-cyclodextrin chloride as a chiral selector in capillary electrophoresis

A novel positively charged single-isomer of β-cyclodextrin, mono-6-deoxy-6-(3R,4R-dihydroxypyrrolidine)-β-CD chloride (dhypy-CDCl), was synthesized and employed as a chiral selector for the first time in capillary electrophoresis (CE) for the enantioseparation of anionic and ampholytic acids. The effects of the running buffer pH, chiral selector concentration, analyte structure and organic modifier on the enantioseparation were studied in detail. The chiral selectivity and resolution for most of the studied analytes decreased as the buffer pH increased in the range of 6.0–9.0. Increasing selector concentration led to decreased effective mobility, increased chiral selectivity and resolution for most of the studied analytes. Moreover, the hydroxyl groups located on the dihydroxypyrrolidine substituent of the dhypy-CDCl could have influence on the chiral separation.

Validated densitometric TLC method for analysis of (R)-and (S)-bupivacaine, using cyclodextrin derivatives as chiral selectors

Anovel economic procedure for stereospecific separation and analysis of ( R )-and ( S )-bupivacaine has been developed and validated. Use of different thin-layer chromatographic plates and different cyclodextrins at different temperatures was investigated. The spots were detected with either iodine vapor, or by use of a UV lamp followed by densitometric measurements at 262 nm. A comparative study was performed using different cyclodextrins — hydroxylpropyl-β-cyclodextrin (HP-β-CD), methyl-β-cyclodextrin (M-β-CD), and dimethyl-β-cyclodextrin (DM-β-CD) — as chiral selectors. The mobile phase enabling successful resolution of ( RS )-bupivacaine was acetonitrile-methanol-water 15:2.5:2.5 ( v/v ) containing 1 mM HP-β-CD; analysis was performed at ambient temperature (25 ± 2°C). The effect on resolution of the concentration of different chiral selectors, temperature, and pH was studied. Calibration plots for analysis of the R and S enantiomers were linear in the range 1.25–35.00 μg per spot ( r ≥ 0.9995, n = 6)...