Classification Phase Research Articles

The Formation of the Strength of Castings including Stress and Strain Analysis.

This article presents some views on the subject of self- or residual stresses, trying to clarify some erroneously seemingly ingrained formulations in the introduction, which are widely used in castings and their classification (thermal, shrinkage, and phase stresses). For example, the location of their occurrence is often not specified, nor in which cross sections (volumes) they balance. In thin bars there are uniaxial stresses and in thin plates, stresses in two orthogonal directions are considered, while in castings, which are always three-dimensional objects, stresses in all planes should be considered. Meanwhile, to make matters worse, the complexity of calculations and possible experiments is rapidly increasing from the 1-axis to the 3-axis condition. A detailed analysis is made of how tensile and compressive stresses are calculated as a function of casting wall thickness, taking into account heat flow between walls of different thicknesses. The article presents selected methods of stress and strain testing, with particular emphasis on elasto-optical testing.

Enhanced crop health monitoring: attention convolutional stacked recurrent networks and binary Kepler search for early detection of paddy crop issues.

The diseases that affect the plants cannot be easily avoided due to rapid and substantial changes in the environment and climate. Generally, paddy crops are affected by several conditions including pests and nutritional deficiencies. Hence, it is important to detect these disease-affected paddy crops at an early stage for better productivity. To detect and classify the problems in this specific domain, deep learning approaches are utilized. In this paper, a novel attention convolutional stacked recurrent based binary Kepler search (ACSR-BKS) algorithm is used to detect diseases, nutritional deficiencies, and pest patterns at an early stage via diverse significant pipelines namely the data augmentation, data pre-processing, and classification phase thereby providing pest patterns and identifying nutritional deficiencies. Subsequent to data collection processes, the images are augmented via zooming, rotating, flipping horizontally, shifting of height, width, and rescaling. To acquire the accurate and best results in terms of classification, the parameters need to be tuned and adjusted using the binary Kepler search algorithm. The results revealed that the accuracy of the proposed ACSR-BKS algorithm is 98.2% in terms of detecting the diseases. Then, the obtained results are compared with the other existing approaches. Additionally, it is revealed that the yield of paddy can also be improved by utilizing the proposed disease-detecting methods.

Evaluation of High-Dimensional Data Classification for Skin Malignancy Detection Using DL-Based Techniques

Skin cancer can be detected through visual screening and skin analysis based on the biopsy and pathological state of the human body. The survival rate of cancer patients is low, and millions of people are diagnosed annually. By determining the different comparative analyses, the skin malignancy classification is evaluated. Using the Isomap with the vision transformer, we analyze the high-dimensional images with dimensionality reduction. Skin cancer can present with severe cases and life-threatening symptoms. Overall performance evaluation and classification tend to improve the accuracy of the high-dimensional skin lesion dataset when completed. In deep learning methodologies, the distinct phases of skin malignancy classification are determined by its accuracy, specificity, F1 recall, and sensitivity while implementing the classification methodology. A nonlinear dimensionality reduction technique called Isomap preserves the data’s underlying nonlinear relationships intact. This is essential for the categorization of skin malignancies, as the features that separate malignant from benign skin lesions may not be linearly separable. Isomap decreases the data’s complexity while maintaining its essential characteristics, making it simpler to analyze and explain the findings. High-dimensional datasets for skin lesions have been evaluated and classified more effectively when evaluated and classified using Isomap with the vision transformer.

Novel intrusion detection system based on a downsized kernel method for cybersecurity in smart agriculture

Smart farming aims to ameliorate the quantity and quality of farms products using modern information and communication technologies. Agriculture has always used cutting-edge technology to improve profitability, efficiency, and safety as well as creating the opportunity for more environmentally friendly operations. In smart agriculture network communication between smart devices is necessary to managing the agriculture process. Consequently, the possibility of information being exposed to hacking is very likely, which makes the information security system extremely important and cannot be neglected. Even though many solutions have been developed to overcome cyberattacks in smart networks, some limitations are observed, such as solving multi-class problems, high feature dimensions, and overhead computation. To address the aforementioned issues, an intelligent Intrusion Detection System (IDS) for identifying cyberattacks in the Internet of Agriculture Things (IoAT) is proposed. The developed model uses a proposed reduced kernel method, the Downsized Kernel Partial Least Square (DKPLS) to extract and reduce data feature dimension to improve detection performance. The DRKPLS approach is used to reduce the dimension of a kernel matrix generated using the Kernel Partial Least Square (KPLS) technique by selecting the most important features. In classification phase, the Kernel Extreme Learning Machine (KELM) is used to classify data for binary and multi-class classification. The proposed IDS is evaluated on a new Industrial IoT Dataset, X-IIoTID. The developed approach achieved higher performances for binary classification and for multi–class classification compared to others machine learning and deep learning approaches. The proposed approach achieved an accuracy rate of 99.92% for binary classification and 99.99% for multi–class classification. Furthermore, the higher percentage in multi-class classification is obtained for the two types of attacks Ransom Denial of Service (RDoS) and Command_Control respectively.

Internet of Things assisted Unmanned Aerial Vehicle for Pest Detection with Optimized Deep Learning Model

IoT technologies & UAVs are frequently utilized in ecological monitoring areas. Unmanned Aerial Vehicles (UAVs) & IoT in farming technology can evaluate crop disease & pest incidence from the ground’s micro & macro aspects, correspondingly. UAVs could capture images of farms using a spectral camera system, and these images are been used to examine the presence of agricultural pests and diseases. In this research work, a novel IoT- assisted UAV- based pest detection with Arithmetic Crossover based Black Widow Optimization-Convolutional Neural Network (ACBWO-CNN) model is developed in the field of agriculture. Cloud computing mechanism is used for monitoring and discovering the pest during crop production by using UAVs. The need for this method is to provide data centers, so there is a necessary amount of memory storage in addition to the processing of several images. Initially, the collected input image by the UAV is assumed on handling the via-IoT-cloud server, from which the pest identification takes place. The pest detection unit will be designed with three major phases: (a) background &foreground Segmentation, (b) Feature Extraction & (c) Classification. In the foreground and background Segmentation phase, the K-means clustering will be utilized for segmenting the pest images. From the segmented images, it extracts the features including Local Binary Pattern (LBP) &improved Local Vector Pattern (LVP) features. With these features, the optimized CNN classifier in the classification phase will be trained for the identification of pests in crops. Since the final detection outcome is from the Convolutional Neural Network (CNN); its weights are fine-tuned through the ACBWO approach. Thus, the output from optimized CNN will portray the type of pest identified in the field. This method’s performance is compared to other existing methods concerning a few measures.

Rotor fault characterization study by considering normalization analysis, feature extraction, and a multi-class classifier

Background. Rotor faults are the most common malfunctions encountered, especially during the manufacturing stage, in asynchronous motors. These faults cause vibration in the motor torque and a decrease in efficiency. In recent years, the detection of rotor faults has been done using motor current. The reflection of rotor faults on motor current depends on slip, and therefore, the effect increases as the current grows. Good results are achieved in fault detection at nominal loads. However, especially when motor manufacturers are considered, testing the motor by loading it requires expensive testing equipment and long-term test procedures. Therefore, the detection of faults in the motor at no load is emphasized. However, since the effect of the fault decreases when the motor is at no load, fault detection becomes difficult. Generally, small-level faults cannot be detected. Objective. This study focuses on fault detection from the motor current at no load. The development current at no load was used to eliminate the negative effects of slip. However, since the slip is not constant, the change in frequency and amplitude values to be used as a feature makes the diagnosis difficult. Method. In this study, the spectrogram was used to evaluate the change during the start-up time. Thus, a standard dataset was determined for comparison. The texture properties of the spectrogram image were extracted using various methods. The extracted features were subjected to normalization analysis and classified using the k-NN algorithm. Results. In the classification phase, a classification accuracy of 98.66% was achieved using the k-NN method, and it was seen that the proposed method could be used for the detection of rotor faults. Conclusions. The study has successfully demonstrated that broken rotor bar faults in asynchronous motors can be diagnosed using the motor start-up data.

Intelligent MRI diagnosis of neurological alterations in infants from 4 to 12 months

AbstractMagnetic resonance imaging is an essential tool for the identification of neurological problems since it provides relevant information on brain development. The aim of the present work was the detection of neurological alterations in newborns from 4 to 12 months of age by segmentation and analysis of lateral ventricles in magnetic resonance images. For this purpose, an automated deep approach based on U‐net is proposed to segment the cerebral ventricles of the newborn. Subsequently, for these regions, features were extracted based on the patient's clinical history and on the shape (area, roundness, normalized central moment, among others) and pixel intensity (mean gray value, contrast level, among others). Once the features were extracted, different types of intelligent models (Logistic Regression, k‐Nearest Neighbors (kNN), and a Convolutional Neural Network) were assessed to detect the presence of neurological alterations. The segmentation phase of the system was tested on 50 patients and the classification phase on 28 patients (11 healthy, 17 with neurological changes). The results show a DICE similarity coefficient of 0.89 and a volume ratio of 1.05 for the segmentation stage and an accuracy of 98%, precision of 100%, sensitivity of 92%, and specificity of 100% for the classification stage using kNN. The last one proved to be the most computationally feasible model, due to the time required for training and inference (0.36 s and 35.2e‐4 s, respectively), as well as the consumption of computational resources (0.1 GB RAM CPU). In conclusion, it is possible to detect neurological alterations in newborns aged 4 to 12 months by segmenting and classifying the lateral ventricles in magnetic resonance images, using image processing techniques, the U‐net, as well as the kNN algorithm. This proposed methodology could play an important role in the early diagnosis and treatment of neurological disorders.

Deep learning workflow to support in-flight processing of digital aerial imagery for wildlife population surveys.

Deep learning shows promise for automating detection and classification of wildlife from digital aerial imagery to support cost-efficient remote sensing solutions for wildlife population monitoring. To support in-flight orthorectification and machine learning processing to detect and classify wildlife from imagery in near real-time, we evaluated deep learning methods that address hardware limitations and the need for processing efficiencies to support the envisioned in-flight workflow. We developed an annotated dataset for a suite of marine birds from high-resolution digital aerial imagery collected over open water environments to train the models. The proposed 3-stage workflow for automated, in-flight data processing includes: 1) image filtering based on the probability of any bird occurrence, 2) bird instance detection, and 3) bird instance classification. For image filtering, we compared the performance of a binary classifier with Mask Region-based Convolutional Neural Network (Mask R-CNN) as a means of sub-setting large volumes of imagery based on the probability of at least one bird occurrence in an image. On both the validation and test datasets, the binary classifier achieved higher performance than Mask R-CNN for predicting bird occurrence at the image-level. We recommend the binary classifier over Mask R-CNN for workflow first-stage filtering. For bird instance detection, we leveraged Mask R-CNN as our detection framework and proposed an iterative refinement method to bootstrap our predicted detections from loose ground-truth annotations. We also discuss future work to address the taxonomic classification phase of the envisioned workflow.

An enhanced mechanism for detection of spam emails by deep learning technique with bio-inspired algorithm

This study aims to create a highly effective system for classifying email spam, with the key objective of improving performance and accuracy in classification. Rigorous pre-processing techniques, including lemmatization and tokenization, are applied to refine the dataset. The impact of optimal feature selection on deep learning algorithm stability with varying training datasets is investigated and to improve classifier performance, pre-stages such as feature extraction and selection using bag of words are utilized. The hybrid model is further enhanced by combining feature extraction and classification algorithms with optimization. The inclusion of multiple features, such as n-gram features, addresses the 'Curse of Dimensionality,' and optimal feature selection is employed to improve the spam detection process. The proposed system undergoes three main modifications: multiple feature extraction, feature selection, and an enhanced hybrid model, all aimed at improving spam detection accuracy. The e-mail classification phase involves mapping between training and testing sets, with deep learning algorithms utilized for feature extraction and classification.The recently introduced Sand Cat Swarm Optimization algorithm is employed to refine weights during each epoch, enhancing accuracy and minimizing loss. The proposed system extends its capabilities to identify phishing attacks within the network, offering a comprehensive approach to email security.

Mayfly algorithm-based semi-supervised band selection with enhanced bitonic filter for spectral-spatial hyperspectral image classification

ABSTRACT Hyperspectral imaging effectively distinguishes land cover classes with discriminative spectral-spatial characteristics. However, hyperspectral image (HSI) classification encounters three significant challenges: the curse of dimensionality, the scarcity of training samples, and the necessity to incorporate spatial information within the classification process. The large number of redundant and irrelevant spectral bands in HSI can negatively impact the classification performance. Furthermore, the annotation process for training samples is expensive and time-consuming. To address these challenges, this work presents a novel semi-supervised approach for hyperspectral image dimensionality reduction using the Mayfly Algorithm (MA). The proposed method aims to preserve the most informative spectral bands while leveraging both labelled and unlabelled samples in the process. The MA algorithm effectively balances exploration and exploitation strategies, enhancing population diversity and mitigating challenges such as premature convergence and local optima. Additionally, the inclusion of structural variation and thresholding (SVT) in the Bitonic filter enables the incorporation of spatial features during the classification phase. This improves the separability of pixels belonging to different objects and leads to significant improvements in classification performance. Finally, two machine learning classifiers, namely Random Forest (RF) and Support Vector Machine (SVM), are applied at the pixel level for hyperspectral image classification. Extensive experimental results on three real hyperspectral datasets demonstrate the superiority of the proposed approach compared to state-of-the-art algorithms like Harmony Search (HS), Genetic Algorithm (GA), Particle Swarm Optimization (PSO), and more with an average improvement of 3.2%.

Circulating miRNA’s biomarkers for early detection of hepatocellular carcinoma in Egyptian patients based on machine learning algorithms

Liver cancer, which ranks sixth globally and third in cancer-related deaths, is caused by chronic liver disorders and a variety of risk factors. Despite therapeutic improvements, the prognosis for Hepatocellular Carcinoma (HCC) remains poor, with a 5-year survival rate for advanced cases of less than 12%. Although there is a noticeable decrease in the frequency of cases, liver cancer remains a significant worldwide health concern, with estimates surpassing one million cases by 2025. The prevalence of HCC has increased in Egypt, and it includes several neoplasms with distinctive messenger RNA (mRNA) and microRNA (miRNA) expression profiles. In HCC patients, certain miRNAs, such as miRNA-483-5P and miRNA-21, are upregulated, whereas miRNA-155 is elevated in HCV-infected people, encouraging hepatocyte proliferation. Short noncoding RNAs called miRNAs in circulation have the potential as HCC diagnostic and prognostic markers. This paper proposed a model for examining circulating miRNAs as diagnostic and predictive markers for HCC in Egyptian patients and their clinical and pathological characteristics. The proposed HCC detection model consists of three main phases: data preprocessing phase, feature selection based on the proposed Binary African Vulture Optimization Algorithm (BAVO) phase, and finally, classification as well as cross-validation phase. The first phase namely the data preprocessing phase tackle the main problems associated with the adopted datasets. In the feature selection based on the proposed BAVO algorithm phase, a new binary version of the BAVO swarm-based algorithm is introduced to select the relevant markers for HCC. Finally, in the last phase, namely the classification and cross-validation phase, the support vector machine and k-folds cross-validation method are utilized. The proposed model is evaluated on three studies on Egyptians who had HCC. A comparison between the proposed model and traditional statistical studies is reported to demonstrate the superiority of using the machine learning model for evaluating circulating miRNAs as diagnostic markers of HCC. The specificity and sensitivity for differentiation of HCC cases in comparison with the statistical-based method for the first study were 98% against 88% and 99% versus 92%, respectively. The second study revealed the sensitivity and specificity were 97.78% against 90% and 98.89% versus 92.5%, respectively. The third study reported 83.2% against 88.8% and 95.80% versus 92.4%, respectively. Additionally, the results show that circulating miRNA-483-5p, 21, and 155 may be potential new prognostic and early diagnostic biomarkers for HCC.

Real-Time Compact Digital Processing Chain for the Detection and Sorting of Neural Spikes from Implanted Microelectrode Arrays

Implantable microelectrodes arrays are used to record electrical signals from surrounding neurons and have led to incredible improvements in modern neuroscience research. Digital signals resulting from conditioning and the analog-to-digital conversion of neural spikes captured by microelectrodes arrays have to be elaborated in a dedicated DSP core devoted to a real-time spike-sorting process for the classification phase based on the source neurons from which they were emitted. On-chip spike-sorting is also essential to achieve enough data reduction to allow for wireless transmission within the power constraints imposed on implantable devices. The design of such integrated circuits must meet stringent constraints related to ultra-low power density and the minimum silicon area, as well as several application requirements. The aim of this work is to present real-time hardware architecture able to perform all the spike-sorting tasks on chip while satisfying the aforementioned stringent requirements related to this type of application. The proposed solution has been coded in VHDL language and simulated in the Cadence Xcelium tool to verify the functional behavior of the digital processing chain. Then, a synthesis and place and route flow has been carried out to implement the proposed architecture in both a 130 nm and a FD-SOI 28 nm CMOS process, with a 200 MHz clock frequency target. Post-layout simulations in the Cadence Xcelium tool confirmed the proper operation up to a 200 MHz clock frequency. The area occupation and power consumption of the proposed detection and clustering module are 0.2659 mm2/ch, 7.16 μW/ch, 0.0168 mm2/ch, and 0.47 μW/ch for the 130 nm and 28 nm implementation, respectively.

A comprehensive exploration of deep learning approaches for pulmonary nodule classification and segmentation in chest CT images

AbstractAccurately determining whether nodules on CT images of the lung are benign or malignant plays an important role in the early diagnosis and treatment of tumors. In this study, the classification and segmentation of benign and malignant nodules on CT images of the lung were performed using deep learning models. A new approach, C+EffxNet, is used for classification. With this approach, the features are extracted from CT images and then classified with different classifiers. In other phases of the study, a segmentation between benign and malignant was performed and, for the first time, a comparison of nodes was made during segmentation. The deep learning models InceptionV3, DenseNet121, and SeResNet101 were used as backbone models for feature extraction in the segmentation phase. In the classification phase, an accuracy of 0.9798, a precision of 0.9802, a recognition of 0.9798, an F1 score of 0.9798, and a kappa value of 0.9690 were achieved. During segmentation, the highest values of 0.8026 Jacard index and 0.8877 Dice coefficient were achieved.

A Hierarchical Classification Method for High-accuracy Instruction Disassembly with Near-field EM Measurements

Electromagnetic (EM) fields have been extensively studied as potent side-channel tools for testing the security of hardware implementations. In this work, a low-cost side-channel disassembler that uses fine-grained EM signals to predict a program's execution trace with high accuracy is proposed. Unlike conventional side-channel disassemblers, the proposed disassembler does not require extensive randomized instantiations of instructions to profile them, instead relying on leakage-model-informed sub-sampling of potential architectural states resulting from instruction execution, which is further augmented by using a structured hierarchical approach. The proposed disassembler consists of two phases: (i) In the feature-selection phase, signals are collected with a relatively small EM probe, performing high-resolution scans near the chip surface, as profiling codes are executed. The measured signals from the numerous probe configurations are compiled into a hierarchical database by storing the min-max envelopes of the probed EM fields and differential signals derived from them, a novel dimension that increases the potency of the analysis. The envelope-to-envelope distances are evaluated throughout the hierarchy to identify optimal measurement configurations that maximize the distance between each pair of instruction classes. (ii) In the classification phase, signals measured for unknown instructions using optimal measurement configurations identified in the first phase are compared to the envelopes stored in the database to perform binary classification with majority voting, identifying candidate instruction classes at each hierarchical stage. Both phases of the disassembler rely on a four-stage hierarchical grouping of instructions by their length, size, operands, and functions. The proposed disassembler is shown to recover ∼97–99% of instructions from several test and application benchmark programs executed on the AT89S51 microcontroller.

Secure healthcare monitoring of arrythmias in internet of things with deep learning and elgamal encryption

Arrhythmia disorders are the leading cause of death worldwide and are primarily recognized by the patient’s irregular cardiac rhythms. Wearable Internet of Things (IoT) devices can reliably measure patients’ heart rhythms by producing electrocardiogram (ECG) signals. Due to their non-invasive nature, ECG signals have been frequently employed to detect arrhythmias. The manual procedure, however, takes a long time and is prone to error. Utilizing deep learning models for early automatic identification of cardiac arrhythmias is a preferable approach that will improve diagnosis and therapy. Though ECG analysis using cloud-based methods can perform satisfactorily, they still suffer from security issues. It is essential to provide secure data transmission and storage for IoT medical data because of its significant development in the healthcare system. So, this paper proposes a secure arrhythmia classification system with the help of effective encryption and a deep learning (DL) system. The proposed method mainly involved two phases: ECG signal transmission and arrhythmia disease classification. In the ECG signal transmission phase, the patient’s ECG data collected through the IoT sensors is encrypted using the optimal key-based elgamal elliptic curve cryptography (OKEGECC) mechanism, and the encrypted data is securely transmitted to the cloud. After that, in the arrhythmia disease classification phase, the system collects the data from the Massachusetts Institute of Technology-Beth Israel Hospital (MIT-BIH) database to perform training. The collected data is preprocessed by applying the continuous wavelet transform (CWT) to improve the quality of the ECG data. Next, the feature extraction is carried out by deformable attention-centered residual network 50 (DARNet-50), and finally, the classification is performed using butterfly-optimized Bi-directional long short-term memory (BOBLSTM). The experimental outcomes showed that the proposed system achieves 99.76% accuracy, which is better than the existing related schemes.

A voting gray wolf optimizer-based ensemble learning models for intrusion detection in the Internet of Things

The Internet of Things (IoT) has garnered considerable attention from academic and industrial circles as a pivotal technology in recent years. The escalation of security risks is observed to be associated with the growing interest in IoT applications. Intrusion detection systems (IDS) have been devised as viable instruments for identifying and averting malicious actions in this context. Several techniques described in academic papers are thought to be very accurate, but they cannot be used in the real world because the datasets used to build and test the models do not accurately reflect and simulate the IoT network. Existing methods, on the other hand, deal with these issues, but they are not good enough for commercial use because of their lack of precision, low detection rate, receiver operating characteristic (ROC), and false acceptance rate (FAR). The effectiveness of these solutions is predominantly dependent on individual learners and is consequently influenced by the inherent limitations of each learning algorithm. This study introduces a new approach for detecting intrusion attacks in an IoT network, which involves the use of an ensemble learning technique based on gray wolf optimizer (GWO). The novelty of this study lies in the proposed voting gray wolf optimizer (GWO) ensemble model, which incorporates two crucial components: a traffic analyzer and a classification phase engine. The model employs a voting technique to combine the probability averages of the base learners. Secondly, the combination of feature selection and feature extraction techniques is to reduce dimensionality. Thirdly, the utilization of GWO is employed to optimize the parameters of ensemble models. Similarly, the approach employs the most authentic intrusion detection datasets that are accessible and amalgamates multiple learners to generate ensemble learners. The hybridization of information gain (IG) and principal component analysis (PCA) was employed to reduce dimensionality. The study utilized a novel GWO ensemble learning approach that incorporated a decision tree, random forest, K-nearest neighbor, and multilayer perceptron for classification. To evaluate the efficacy of the proposed model, two authentic datasets, namely, BoT-IoT and UNSW-NB15, were scrutinized. The GWO-optimized ensemble model demonstrates superior accuracy when compared to other machine learning-based and deep learning models. Specifically, the model achieves an accuracy rate of 99.98%, a DR of 99.97%, a precision rate of 99.94%, an ROC rate of 99.99%, and an FAR rate of 1.30 on the BoT-IoT dataset. According to the experimental results, the proposed ensemble model optimized by GWO achieved an accuracy of 100%, a DR of 99.9%, a precision of 99.59%, an ROC of 99.40%, and an FAR of 1.5 when tested on the UNSW-NB15 dataset.

Preserving the Integrity of Li Yu's Craft Aesthetics using the Digital Information Technology

Preserving the integrity of ancient aesthetic works has become a greater matter of concern in the modern digital age. As the internet is streaming with data that are collected from multiple sources, it imposes a severe threat to the integrity and security of the original aesthetic of many craft works. This paper proposes a novel framework that attempts to preserve Li Yu's craft aesthetics, which can be explored from his wide range of literary collections. As the author is popular for his excellence in many art forms like gardening, theatre arts, etc, recreation of his work is a major problem of concern. The framework initially pre-processed the corpus to extract keywords, which are then subjected to a semantic vector to find the closely related as well as differing words. Then, these words are subjected to geometric perturbations to impart versatility to the training phase. The text under screening is fed to the classification phase to find whether it is an altered or modified work of Li Yu, thus isolating the author's work from being reproduced, which greatly affects the aesthetics. As a future extension, the work can be trained with different classifiers to develop a defrauding system.

MehNet: a vigesimal-based model by amino acid melting points generates unique ID numbers for protein sequences

The amino acid encoding plays a pivotal role in machine learning-based methods for predicting protein structure and function, as well as in protein mapping techniques. Additionally, the classification of protein sequences presents its own challenges. The current study aims to assign a constant value to each amino acid, thereby creating distinctions among protein sequences. The datasets used in this study were obtained from the UniProt Knowledgebase. Subsequently, these datasets underwent preprocessing steps, and identical sequences were categorized under the same headings. Each amino acid was ranked based on its respective melting point and was assigned a vigesimal digit. These generated vigesimal digits were subsequently converted to decimal values. The centerpiece of this methodology was the me lting point h ashi n g t able, which was given the name ‘MehNet’. Ultimately, each protein sequence was assigned a unique identification number. This approach successfully digitized protein sequences. Notably, experiments involving randomly distributed vigesimal digits for amino acids did not yield results as promising as those achieved with MehNet. The model’s classification phase, which utilizes a k-nearest neighbors (kNN) classifier, demonstrates exceptional performance in miscellaneous viral sequences. It achieves high accuracy rates, with an overall accuracy of 99.75%. Notably, it achieves an outstanding accuracy of 99.92% for the Influenza C class, highlighting its ability to distinguish closely related viral sequences. Communicated by Ramaswamy H. Sarma

Classification of MRI brain tumors based on registration preprocessing and deep belief networks

<abstract><p>In recent years, augmented reality has emerged as an emerging technology with huge potential in image-guided surgery, and in particular, its application in brain tumor surgery seems promising. Augmented reality can be divided into two parts: hardware and software. Further, artificial intelligence, and deep learning in particular, have attracted great interest from researchers in the medical field, especially for the diagnosis of brain tumors. In this paper, we focus on the software part of an augmented reality scenario. The main objective of this study was to develop a classification technique based on a deep belief network (DBN) and a softmax classifier to (1) distinguish a benign brain tumor from a malignant one by exploiting the spatial heterogeneity of cancer tumors and homologous anatomical structures, and (2) extract the brain tumor features. In this work, we developed three steps to explain our classification method. In the first step, a global affine transformation is preprocessed for registration to obtain the same or similar results for different locations (voxels, ROI). In the next step, an unsupervised DBN with unlabeled features is used for the learning process. The discriminative subsets of features obtained in the first two steps serve as input to the classifier and are used in the third step for evaluation by a hybrid system combining the DBN and a softmax classifier. For the evaluation, we used data from Harvard Medical School to train the DBN with softmax regression. The model performed well in the classification phase, achieving an improved accuracy of 97.2%.</p></abstract>

Towards an automated classification phase in the software maintenance process using decision tree.

The software maintenance process is costly, accounting for up to 70% of the total cost in the software development life cycle (SDLC). The difficulty of maintaining software increases with its size and complexity, requiring significant time and effort. One way to alleviate these costs is to automate parts of the maintenance process. This research focuses on the automation of the classification phase using decision trees (DT) to sort, rank, and accept/reject maintenance requests (MRs) for mobile applications. Our dataset consisted of 1,656 MRs. We found that DTs could automate sorting and accepting/rejecting MRs with accuracies of 71.08% and 64.15%, respectively, though ranking accuracy was lower at 50%. While DTs can reduce costs, effort, and time, human verification is still necessary.