Application Of Waste Research Articles

Bifunctional electrocatalytic reduction performance of nitrogen containing biomass based nanoreactors loaded with Ni nanoparticles for oxygen and carbon dioxide

In the face of increasing energy demand, the approach of transformation that combines energy restructuring and environmental governance has become a popular research direction. As an important part of electrocatalytic reactions for gas molecules, reduction reactions of oxygen (ORR) and carbon dioxide (CO2RR) are very indispensable in the field of energy conversion and storage. However, the non-interchangeability and irreversibility of electrode materials have always been a challenge in electrocatalysis. Hereon, nickel and nitrogen decorated biomass carbon-based materials (Ni/N-BC) has been prepared by high temperature pyrolysis using agricultural waste straw as raw material. Surprisingly, it possesses abundant active sites and specific surface area as a bifunctional electrocatalyst for ORR and CO2RR. The three-dimensional porous cavity structure for the framework of biomass could not only provide a strong anchoring foundation for the active site, but also facilitate the transport and enrichment of reactants around the site. In addition, temperature modulation during the preparation process also optimizes the composition and structure of biomass carbon and nitrogen. Benefit from above structure and morphology advantages, Ni/N-BC-800 exhibits the superior electrocatalytic activity for both ORR and CO2RR simultaneously. More specifically, Ni/N-BC-800 exhibits satisfactory ORR activity in terms of initial potential and half wave potential, while also enables the production of CO under high selective. The research results provide ideas for the development and design of electrode materials and green electrocatalysts, and also expand new applications of agricultural waste in fields such as energy conversion, environmental protection, and resource utilization.

Polymer Waste Valorization into Advanced Carbon Nanomaterials for Potential Energy and Environment Applications.

The rise in universal population and accompanying demands have directed toward an exponential surge in the generation of polymeric waste. The estimate predicts that world-wide plastic production will rise to ≈590 million metric tons by 2050, whereas 5000 million more tires will be routinely abandoned by 2030. Handling this waste and its detrimental consequences on the Earth's ecosystem and human health presents a significant challenge. Converting the wastes into carbon-based functional materials viz. activated carbon, graphene, and nanotubes is considered the most scientific and adaptable method. Herein, this world provides an overview of the various sources of polymeric wastes, modes of build-up, impact on the environment, and management approaches. Update on advances and novel modifications made in methodologies for converting diverse types of polymeric wastes into carbon nanomaterials over the last 5 years are given. A remarkable focus is made to comprehend the applications of polymeric waste-derived carbon nanomaterials (PWDCNMs) in the CO2 capture, removal of heavy metal ions, supercapacitor-based energy storage and water splitting with an emphasis on the correlation between PWDCNMs' properties and their performances. This review offers insights into emerging developments in the upcycling of polymeric wastes and their applications in environment and energy.

Application of Agro-industrial Solid Waste as Biochar for Iron (II) Removal from Aqueous Solution

In recent years, various industrial activities have introduced a high concentration of iron in the waterbody which causes serious problem to environment. This paper proposed the application of Exhausted Coffee Husk (ECH) as the biosorbent (BS) for removing iron (Fe) (II) in the aqueous solution. The ECH was carbonized into biochar before performing biosorption of the heavy metal ion. The effect of carbonization temperature, time and rate on the performance of the ECH biochar for removing Fe (II) were evaluated. The percentage of removal efficiency (RE) and the capacity of biosorption (mg/g) were considered as the determining parameters. The pyrolysis temperature was varied in a range of 200-600 °C with 50 °C of interval, while the time was in between 1h – 3h with a n interval of 0.5 h, and the temperature gradient of 5 – 25°C/min. The results showed that the temperature had a significant effect on the properties of the ECH biochar as BS for Fe (II). The temperature of 550 °C, at 1.5 h of time and 25 °C/min was chosen as the suggested carbonization temperature of biochar from ECH for biosorption of Fe (II). Keywords: Agro-industrial solid waste, Biosorption, Carbonization, Exhausted coffee husk (ECH), Heavy metal.

Enhanced phytoremediation of metal contaminated soils aimed at decreasing the risk of antibiotic resistance dissemination

The enhanced phytoremediation of metal contaminated soils holds great promise for the recovery of soil health and functionality, while providing a range of co-benefits, from an environmental and human health perspective, derived from the revegetation of the degraded sites and the concomitant delivery of ecosystem services. Due to diverse evolutionary co-selection mechanisms between metal resistance and antibiotic resistance in bacteria, metal contaminated soils are considered potential reservoirs of antibiotic resistant bacteria (ARB) which can contribute to the existing antibiotic resistance crisis. During the enhanced phytoremediation of metal contaminated soils, the application of organic wastes (e.g., manure, slurry, sewage sludge) as soil amendments can aggravate the risk of antibiotic resistance spread, because they often contain ARB which harbor antibiotic resistance genes (ARGs) that can then be propagated among soil bacterial populations through horizontal gene transfer (HGT). Due to the magnitude and criticality of the antibiotic resistance crisis, as well as the higher risk of spread and dispersal of ARB and ARGs (they make copies of themselves) compared to metals, it is proposed here to aim enhanced phytoremediation strategies towards decreasing the soil resistome (and, hence, the risk of its potential link with the human resistome), while reducing total and/or bioavailable metal concentrations and restoring soil health and the delivery of ecosystem services. To this purpose, a decalogue of practices is tentatively suggested. Finally, a proper management of plant and soil microbial compositions is a most crucial aspect, together with the selection of the right organic wastes and phytoremediation practices.

Residual phosphorus availability after soil application of different organic waste in varying soil P status soils

Transformations of applied phosphorus (P) fertilizer to inaccessible residual soil P is the main cause of inadequate P availability to plants in the majority of the cultivated soils. This study investigated the effect of organic wastes (rice-residue biochar, farmyard manure (FYM), poultry manure (PM), green manure (GM), and wheat straw (WS) on residual-P mobilization and its bioavailability in maize crops under different P status soils. Surface soil samples of ‘medium-P’ (12.5–22.5 kg P ha−1) and ‘high-P’ (22.5–50.0 kg P ha−1) status soils were collected from a long-term differential P fertilization experiment on maize-wheat rotation and were subjected to examine P adsorption/desorption, phosphatase activity and microbial biomass P (MBP) after incubation with organic amendments of varying elemental composition. The incorporation of organic manures decreases P sorption with maximum decrease in FYM-treated soils, indicating increased P concentration in soil solution. In contrast, WS due to its wider C/P ratio increased P sorption and did not produce any significant impact on the bioavailability of P. High-P status soils witnessed lower P sorption than medium-P soils. The MBP increased in the order of PM > FYM > GM > WS > biochar irrespective of soil P status. The availability and mobility of residual-P with FYM and PM was significantly higher than that of residual-P from biochar, GM and WS. Organics with wider C/P ratio immobilize bioavailable P in the short term regardless of soil P status.

Effect of Aluminium Fiber on the Strength property of Concrete

This experimental work is aimed at determining the influence of aluminium waste fiber on plain cement concrete. To achieve this aim, compressive strength test has been conducted. The compressive strength test has been conducted in Compression machine. The plain cement concrete with the ratio 1:1.5:3 at 0.55 water cement ratio has been utilized in this study. Aluminium waste has been used as additional material in concrete. The weight of aluminium has been taken from 0.5%, 1.5% and 1.5% by weight of cement of varying aspect ratios that are 2.5 (length=0.5 inch, width=5mm), 5 (length=1inch, width=5mm) and 7.5 (1.5 inch, 0.5mm). A total number of ten batches, each batch contained six cubes and were casted for evaluation of compressive strength test. The curing ages selected for this particular study have been 7 and 28 days. It has been observed in this study that aluminium waste has resulted into a decrease in compressive strength of concrete as compared to normal concrete. This study has made application of solid waste as addition material in concrete. Therefore, this study will be helpful to reduce environmental pollution.

Application of industrial waste in foundry and metallurgical technologies. Experience of the department of Metallurgical Technologies and Equipment

Application of industrial waste in foundry and metallurgical technologies. Experience of the department of Metallurgical Technologies and Equipment

The soil-microbe-plant resistome: A focus on the source-pathway-receptor continuum.

The One World, One Health concept implies that antibiotic resistance (AR) in the soil-microbe-plant resistome is intricately linked to the human resistome. However, the literature is mainly confined to sources and types of AR in soils or microbes, but comprehensive reviews tracking AR in the soil-microbe-plant resistome are limited. The present review applies the source-pathway-receptor concept to understand the sources, behaviour, and health hazards of the soil-microbe-plant resistome. The results showed that the soil-microbe-plant system harbours various antibiotic-resistance genes (ARGs), antibiotic-resistant bacteria (ARB), and mobile genetic elements (MGEs). Anthropogenic sources and drivers include soil application of solid waste, wastewater, biosolids, and industrial waste. Water-, wind-, and human-driven processes and horizontal gene transfer circulate AR in the soil-microbe-plant resistome. The AR in bulk soil, soil components that include soil microorganisms, soil meso- and macro-organisms, and possible mechanisms of AR transfer to soil components and ultimately to plants are discussed. The health risks of the soil-microbe-plant resistome are less studied, but potential impacts include (1) the transfer of AR to previously susceptible organisms and other resistomes, including the human resistome. Overall, the study tracks the behaviour and health risks of AR in the soil-plant system. Future research should focus on (1) ecological risks of AR at different levels of biological organization, (2) partitioning of AR among various phases of the soil-plant system, (3) physico-chemical parameters controlling the fate of AR, and (4) increasing research from low-income regions particularly Africa as most of the available literature is from developed countries.

Identification of cyclooxygenase-II inhibitory saponins from fenugreek wastes: Insights from liquid chromatography-tandem mass spectrometry metabolomics, molecular networking, and molecular docking.

This research explores sustainable applications for waste generated from fenugreek (Trigonella foenum-graecum), a plant with both nutritional and medicinal uses. The study specifically targets waste components as potential sources of nutrients and bioactive compounds. The focus is to conduct detailed metabolic profiling of fenugreek waste, assess its anti-inflammatory properties by studying its cyclooxygenase (COX) inhibitory effect, and correlate this effect to the metabolite fingerprint. Ethanolic extracts of fenugreek fruit pericarp and a combination of leaves and stems were subjected to untargeted metabolic profiling using liquid chromatography-mass spectrometry integrated with online database searches and molecular networking as an effective dereplication strategy. The study also scrutinized the COX inhibitory capabilities of these extracts and saponin-rich fractions prepared therefrom. Molecular docking was employed to investigate the specific interactions between the identified saponins and COX enzymes. The analysis led to the annotation of 81 metabolites, among which saponins were predominant. The saponin-rich fraction of the fruit pericarp extract displayed the strongest COX-II inhibitory activity in the in vitro inhibition assay (IC50 value of 81.64 ± 3.98 μg/mL). The molecular docking study supported the selectivity of the identified saponins towards COX-II. The two major identified saponins, namely, proto-yamogenin 3-O-[deoxyhexosyl (1 → 2)] [hexosyl (1 → 4)] hexoside 26-O-hexoside and trigofenoside A, were predicted to have the highest affinity to the COX-II receptor site. In the present study, we focused on the identification of COX-II inhibitory saponins in fenugreek waste through an integrated approach. The findings offer valuable insights into potential anti-inflammatory and cancer chemoprotective applications of fenugreek waste.

Structural and thermal investigation of lignocellulosic biomass conversion for enhancing sustainable imperative in progressive organic refinery paradigm for waste-to-energy applications

The depletion of finite fossil fuel reserves and the severe environmental degradation resulting from human activities have compelled the expeditious development and application of sustainable waste to energy technologies. To encapsulate energy and environment in sustainability paradigm, bio waste based energy production is need to be forged in organic bio refinery setup. According to world bioenergy association, biomass can cover 50 % of the primary energy demand of the world. Therefore, the present study focuses on reforming the energy mix for a clean energy generation, where, sample composition of cotton stalk was acidified in dilute (5% wt.) hydrochloric acid (HCL) for analyzing material burnout patterns in biomass conversion systems utilized in organic bio refinery sector. Advanced thermochemical burning technique, which includes pyrolysis and combustion was applied at four different leaching times from 0 to 180 min under nitrogen environment from 0 °C to 500 °C and air from 500 °C to 900 °C, respectively. Different analyses including proximate, ultimate, gross calorific value (GCV), thermos-gravimetric, kinetic, XRD, FTIR, SEM-EDS were used for analyzing the degradation of demineralized cotton stalk at different treatment rates. Proximate study demonstrated that cotton stalk leaching for 180 min has efficiently infused HCL, leading in a significant increase in fixed carbon and higher heating value of 20.23 % and 12.48%, respectively, as well as a reduction in carbon footprint of around 54.80%. The findings of proximate was validated by GCV analysis and CHNS analysis as value of carbon and hydrogen has shown increasing behavior with the time delay in demineralization Thermo-gravimetric and derivative thermo-gravimetric data analyses shows an increasing trend of conversion efficiency, with the maximum increase of 98 % reported for sample 3H.TT.DEM. XRD characterization has reported 23° to 25° angle for all the observed peaks. Sample 3H.TT.DEM has shown maximum angle inclination along with matured crystalline peak. The latter observations has been validated by FTIR spectroscopy as sample 3H.TT.DEM has reported maximum O–H group formation. Sample 3H.TT.DEM has reported lowest activation energy of 139.51 kJ*mole-1 and lowest reactivity of 0.000293649%*min 0C, due to moderate and stable reactiveness. In SEM examination, increment in pore size and number of pores within the structural matrix of cotton stalk was observed with the enhancement in acidulation process. Furthermore, in EDS analysis, 3H.TT.DEM has shown most balanced distribution of the elements. In this research, sustainable transformation of biomass is envisioned to improve the waste bio refinery system, significantly contributing to the achievement of Sustainable Development Goals 7, 12 and 13.

Emergence of Bio-hydrometallurgy to Achieve Sustainable Process Development Goals in Extractive Metallurgy

The stringent environmental regulations and growing awareness of the low-carbon economy are presenting immense challenges to metallurgical operations, one of the major sectors with high emissions. Hydrometallurgy has been identified as a lower-emission technology in comparison to the high-temperature smelting and melt-refining processes. The close monitoring of traditional hydrometallurgical operations, however, does not fulfil the criteria for a sustainable, low-emission process. Recently, biotechnology has emerged as a green alternative within the hydrometallurgical domain, albeit significantly different from the basics involved in the process. Although the application of microbial activity has been successfully established in chalcopyrite leaching and bio-oxidation of gold-bearing minerals, the acceptability of bio-hydrometallurgy for other minerals and materials is still limited due to a wide research gap to connect solution chemistry, microbial activity, and extractive metallurgy. In general, a large portion of the total chemical consumption occurs in pre-treatment and/or leaching operations; hence, the primary application of microorganisms at the forefront can significantly minimize the overall consumption. Demonstrated applications in waste printed circuit boards and spent automobile catalysts have curtailed excessive acid usage, while the energy-intensive baking/roasting of monazite is successfully altered by microbial processing. Furthermore, the remarkable reduction in carbon footprints by the green biotechnology application in hydrometallurgy has been evaluated, which indicates sustainability in process metallurgy.

Assessment of construction and demolition waste application for improving frost resistance in masonry clay units

The main objective of the research was to estimate the feasibility of construction and demolition waste (CDW) application in the production of frost-resistant masonry clay elements. After being formed into hollow masonry blocks and bricks, the experimental samples were dried and fired. Chemical, granulometric, mineralogical, differential-thermal, and thermogravimetric analyses were used for characterizing the materials. Drying sensitivity and plasticity were assessed using the Bigot and Pfefferkorn tests. Linear shrinkage and compressive strength were determined on green and fired ceramic samples. Frost resistance was tested in accordance with EN 772-22 and ASTM C1167-22. The mercury intrusion porosimeter and RapidAir 457 were used in the evaluation of the pore size distribution. Clay elements fired at lower temperatures proved more frost-resistant. Waste-based elements exhibited improved frost resistance compared to standard bricks and hollow blocks. The compressive strength of the waste-added building products was reduced, but it still exceeded the standard strength values for their application in load-bearing walls.

Association of magnetic-flyash in anaerobic co-digestion for biomethane optimization: Promoting biofilm formation

The application of low-cost magnetic industrial wastes as accelerants can significantly improve the performance of anaerobic co-digestion (AcoD), thereby enhancing the biogas yield. In this work, varying concentrations (1.0–4.0 wt.%) of magnetic flyash (MFA) were applied to the AcoD of cow manure (CM) and aloe peel waste (APW). All AcoD systems were operated under mesophilic condition (37 ᴼC) with a 5 mT magnetic field. The AcoD system with 2.0 wt.% of MFA showed the highest cumulative biogas yield (487 mL/g VS), methane content (65.17%), COD, TS and VS removal rates (36.45, 45.49 and 52.10%, respectively), and fertility (3.4%). However, the 1.0 wt.% of NMFA also showed higher cumulative biogas yield (432 mL/g VS), methane content (60.23%), COD, TS and VS (27.69, 18.24 and 43.64%, respectively), and fertility (3.31%) than other NMFA concentrations (1.5 & 2.0 wt.%). Kinetic models verified that MFA coupled with a magnetic field could increase biogas potential and production rate. A strategy for determining the role of MFA in microbial biofilm formation and improving biodegradation, which increases the biogas yield, is also suggested. This work demonstrates a cost-effective application of MFA in bioenergy production systems by improving the AD process.

Utilization of iron fillings solid waste for optimum biodiesel production.

This study explores the innovative application of iron filings solid waste, a byproduct from mechanical workshops, as a heterogeneous catalyst in the production of biodiesel from waste cooking oil. Focusing on sustainability and waste valorization, the research presents a dual-benefit approach: addressing the environmental issue of solid waste disposal while contributing to the renewable energy sector. Particle size distribution analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence (XRF), Thermal analysis (TG-DTA), and FTIR analysis were used to characterize the iron filings. The response surface methodology (RSM) was used to guide a series of experiments that were conducted to identify the optimum transesterification settings. Important factors that greatly affect the production of biodiesel are identified by the study, including catalyst loading, reaction time, methanol-to-oil ratio, reaction temperature, and stirring rate. The catalyst proved to be successful as evidenced by the 96.4% biodiesel conversion efficiency attained under ideal conditions. The iron filings catalyst's reusability was evaluated, demonstrating its potential for numerous applications without noticeably decreasing activity. This work offers a road towards more environmentally friendly and sustainable chemical processes in energy production by making a strong argument for using industrial solid waste as a catalyst in the biodiesel manufacturing process.

Research on Quality Grading Evaluation and Performance Prediction of Construction Waste Recycled Materials

The application of construction waste in road engineering is an effective means to improve the level of resource recycling. Due to the lack of specialized sorting equipment for different types of construction waste and the high cost of manual sorting, resource utilization enterprises mainly rely on mixed crushing and regeneration in production, while there is a lack of systematic research on the application technical indicators of recycled aggregates for brick concrete mixed construction waste. This article proposes a quality evaluation model for construction waste coarse aggregates based on the theory of matter element extension, providing new ideas for quantitative evaluation of the quality status of coarse aggregates, and also providing reference for the rational selection of recycled coarse aggregates and the determination of mechanical parameters of coarse aggregates in the construction process, which is conducive to the evaluation and analysis of the quality status of recycled coarse aggregates.

Green synthesis of ZnO-NPs using sugarcane bagasse waste: phytochemical assessment of extract and biological study of nanoparticles.

The accumulation of agricultural and industrial residues inevitably contributes to environmental pollution. Thus, several scientific investigations have been conducted to overcome this problem and to add an economic value proposition. Unlike typical sugarcane bagasse applications, this work presents a novel application of sugarcane bagasse waste in a green synthesis approach for forming zinc oxide nanoparticles (ZnO-NPs). This work opens the door to studying the potential of sugarcane bagasse in a green synthesis orientation. Phytochemical assessment of the aqueous extract of sugarcane bagasse waste was conducted by studying total flavonoid content, total phenolic content, and antioxidant assays. ZnO-NPs were synthesized using the aqueous sugarcane bagasse extract (ASCBE) with a 96% yield. To obtain 99.7% pure ZnO-NPs, nanoparticles were calcined at 550 °C to remove any remaining plant extract residues. The purity and yield of the produced and modified ZnO-NPs were studied. The initially produced and modified ZnO-NPs were characterized using XRD, FT-IR, UV, TEM, TGA, and PL and to determine the necessity of the calcination step. A detailed proposed mechanism for the formation of ZnO-NPs mediated by ASCBE was introduced. The ZnO-NPs were studied for their antibacterial, antifungal, and antiviral activities. The ZnO-NPs before calcination were found to exhibit more potent antimicrobial activity against both P. aeruginosa and A. niger compared to the calcined ZnO-NPs. In addition, molecular docking analysis revealed that the ZnO-NPs had the strongest binding affinity towards the P. aeruginosa RhlG/NADP active-site complex and the crystal structure of Actibind, a T2 RNase of A. Niger. ZnO-NPs also showed promising binding interactions with viral targets, including the Herpes simplex virus type II protease and Influenza virus NS1 effector domain. Additionally, environmental and economic studies were achieved to relate the scientific study with daily life applications.

Synthesis of pumice and medical waste incinerator fly ash based phosphate geopolymers for methylene blue dye adsorption: co-valorization, parameters and mechanism

Synthesis of pumice-based geopolymer composites, GP-0, GP-10, GP-20 and GP-30, substituted with fractions of 0, 10, 20 and 30% by weight of medical waste incinerator fly ash (MWI-FA), respectively and application for dye removal.

A microphysiological system for parallelized morphological and electrophysiological read-out of 3D neuronal cell culture.

Three-dimensional in vitro models in microfluidic systems are promising tools for studying cell biology, with complex models using multiple cell types combined with high resolution imaging. Neuronal models demand electrical readout of the activity of networks of single neurons, yet classical planar microelectrode arrays struggle to capture extracellular action potentials when neural soma are suspended distant from the microelectrodes. This study introduces sophisticated microfluidic microelectrode arrays, specifically tailored for electrophysiology of 3D neuronal cultures. Using multilayer photolithography of permanent epoxy photoresists, we developed devices having 12 independent culture modules in a convenient format. Each module has two adjacent compartments for hydrogel-based 3D cell culture, with tunnels allowing projection of neurites between compartments. Microelectrodes integrated in the tunnels record action potentials as they pass between the compartments. Mesh ceilings separate the compartments from overlying wells, allowing for simple cell seeding and later nutrient, gas and waste exchange and application of test substances. Using these devices, we have demonstrated 3D neuronal culture, including electrophysiological recording and live imaging. This microphysiological platform will enable high-throughput investigation of neuronal networks for investigation of neurological disorders, neural pharmacology and basic neuroscience. Further models could include cocultures representing multiple brain regions or innervation models of other organs.

Application of waste derived magnetic acid-base bifunctional CoFe/biochar/CaO as an efficient catalyst for biodiesel production from waste cooking oil

The loss of active components, weak acid resistance, and low recover efficiency of common Ca-based catalysts limited its further development and application. In this study, to effectively produce biodiesel from waste cooking oil (WCO), a green and recyclable magnetic acid-base bifunctional CoFe/biochar/CaO catalyst was prepared from sargassum and river snail shell waste via hydrothermal method. The catalysts' structure and properties were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), CO2/NH3 temperature programmed desorption (CO2/NH3 TPD), etc., The prepared catalyst mainly consisted of the carbon skeleton, CoFe alloy, and CaO. CoFe alloy provided catalyst's ferromagnetism for magnetic separation as well as acid sites for transesterification of WCO. Ca and other metal species with nanoscale (∼5.64 nm) were dispersively anchored on sargassum biochar surface, thereby leading to good catalytic activity (99.21% biodiesel yield) and stability (91.70% biodiesel yield after the 5th cycle). In addition, response surface methodology-Box-Behnken design (RSM-BBD) revealed the optimal operational conditions were 16:1 methanol/oil molar ratio, 3 wt% catalyst dosage, 73 °C for 157 min. The maximum biodiesel yield predicted value was 98.29% and the experimental value was 99.21%, indicating good satisfaction of the established model. Moreover, the quality of WCO biodiesel met the ASTM D6751 standards. This study benefits magnetic waste-derived acid-base bifunctional catalysts for the disposal of WCO towards sustainable biodiesel production.

Rock splitting with pyrotechnic compositions and secondary propellants

In some cases of resources extraction, as well as in construction at industrial and urbanized territories, commercial explosives are not safe enough for the surroundings with regard to the generated fly-rocks, air-blast, toxic fumes, seismic waves and vibrations. The main reasons for these harmful impacts of explosion are the velocity and the mechanism of the chemical reaction of explosive decomposition. The authors shifted the focus of their researches from detonating explosives to high-speed combusting energetic materials. The production of low explosive non-detonating mixtures from long-term stored smokeless gunpowders and ammonium nitrate prills in different configurations, and popular pyrolant compositions were studied. The samples of different cartridge casings, filled with non-detonating propellant mixtures or pyrotechnic compositions were examined by two methods - for velocity of propagation and by field tests. It was made investigations for application of waste single-base-powders and double-base-powders for obtaining non-detonating explosive cartridges, suitable in dimension stone mining, as well as in blasting activities at tender and complicated conditions.