Transient turn-on characteristics of Si RBDT and SiC MOSFET under nanosecond current pulse range

Abstract

With the development of pulse power supplies, solid-state semiconductor switches are required to have fast switching speeds and low losses. Both Reverse blocking diode thyristor (RBDT) and silicon carbide metal oxide semiconductor field effect transistor (SiC MOSFET) have fast turn-on speed, making them suitable candidates for short pulse generator. In this paper, the transient turn-on characteristics of Si RBDT and SiC MOSFET are analyzed theoretically and validated experimentally. Si RBDT and commercial 1.2 kV/81A SiC MOSFET are comparatively investigated in switching current pulse with a rise time of several hundreds of nanoseconds. (1) The anode current of RBDT could rise exponentially because of the latch-up effect of Si RBDT, while the drain current of SiC MOSFET tends to be saturated. (2) Utilizing the current rise time (Trise) to represent the switching speed, SiC MOSFET can switch faster when the current is lower than 400A. With the increase of the current, Si RBDT presents faster turn-on speed and lower switching loss due to the regenerative action of the two coupled transistors. (3) The transient characteristics of Si RBDT include a voltage-controlled inductance, while SiC MOSFET contains a current-controlled inductance based on the current rise time, respectively. With the increasing of the main voltage, the equivalent inductance of Si RBDT decreases and tends to be saturated when the main voltage is higher than half of the breakdown voltage of Si RBDT. For SiC MOSFET, the equivalent inductance increases until the drain current remains stable for a given gate voltage. This paper confirms the advantages of Si RBDT and SiC MOSFET in different situations.