Wood Waste Research Articles

Syngas composition analysis for waste to methanol production: Techno-economic assessment using machine learning and Aspen plus

The yield of methanol is heavily influenced by the composition of the syngas which varies from waste type and gasification conditions. This study uniquely explores machine learning (ML) and artificial neural network (ANN) algorithms with shapley additive values (SHAP) analysis to predict syngas compositions and interpret the complexities of waste gasification. Aspen Plus is then utilized to investigate the impact of syngas compositions on the economics of methanol production. Among the different ML models, gradient boosting regression achieved remarkable accuracy in predicting carbon monoxide and carbon dioxide, while ANN excelled in predicting nitrogen and hydrogen based on the coefficient of determination (>0.95). The feature importance analysis demonstrated the gasification agent type as the most important feature. Steam gasification of waste sawdust, straw, and wood chips showed the highest methanol yield. Economic analysis indicated the lowest levelized cost of methanol (LCMeOH) to be 1195.79 USD/MT which further decreased to 933.97 USD/MT upon hydrogen addition. Uncertainty analysis using Monte Carlo method showed the possible minimum LCMeOH to be 254.05 USD/MT. This study provides a comprehensive picture of the economic viability of waste-to-methanol production and provides an important reference for stakeholders on a global scale to quickly assess the feasibility of waste-to-energy projects.

Prediction of the Slagging and Fouling of Indonesian Coal with Hard Wood from Central and East Java

Indonesia as an agricultural country has abundant biomass potential, especially wood waste in Java. The prospect of co-firing is considered ideal to overcome the problem of coal use in boilers. This is also in line with supporting the Indonesian government program in increasing the use of renewable energy. Samples of coal co-firing with wood waste from Central Java and East Java were selected for this study. Furthermore, blending between coal and wood biomass from Central and East Java with a composition ratio of (25%:75%) and (50%:50%). Furthermore, it is predicted based on the risk tendency of slagging and fouling. The risk of slagging, fouling, abrasion, and corrosion with theoretical index. In general, increasing the composition of coal blending with hardwood increases the tendency of slagging and fouling. However, blending coal with hardwood from Central Java at a mixture of (25%:75%) can be recommended because it has a low risk of slagging and fouling.

Experimental study on the preparation of wood aggregate recycled concrete using waste wood and recycled fine aggregate from construction and demolition wastes

As a renewable resource, wood has the advantages of a high strength-weight ratio, high yield and excellent thermal insulation. Meanwhile, the resource utilization of large quantities of waste wood, waste furniture and mixed wood generated by the demolition of old houses and the removal of building formwork are basically in a blank state. Therefore, in this study, construction solid waste—waste wood and recycled fine aggregate were used as coarse and fine aggregates to replace natural sand and gravel, respectively, and synergized with three cementitious materials (sulfoaluminate cement, portland cement and geopolymer cement) to prepare wood aggregate recycled concrete (WARC). Focus on the evolution law of basic property, thermal insulation property, mechanical property, shrinkage property, environmental and economic benefits of WARC. The results showed that the mechanical and shrinkage properties of WARC were deteriorated by using WA and recycled fine aggregate (RFA) instead of natural aggregates. The dry density of WARC was as low as 1770 kg/m3. The 28 d maximum compressive and flexural strength were 34.8 and 5.69 MPa, which were better than traditional C30 concrete. Compared with conventional concrete, WARC has excellent thermal insulation properties. The thermal conductivity was reduced by up to 81.9 % compared to traditional concrete, which would make WARC very promising for non-structural components (green insulated wall materials and precast wall panels, etc.). By calculating CO2 emissions and compressive strength-cost efficiency values, it was found that the WARC prepared with geopolymer cement could reduce CO2 emissions by 31.3 % while possessing good mechanical properties and economic benefits, making it the optimal cement-based material for preparing WARC.

Utilization of Wood Waste as Learning Media for Children with Special Needs

Utilization of Wood Waste as Learning Media for Children with Special Needs

Use of scrap particleboard to produce recycled particleboard

Recycling is presently the most environmentally friendly approach that deals with wood waste. Each year a huge amount of particleboard completes its service life and needs to be disposed of or recycled. Scrap particleboard has the potential to be reused as raw material for particleboard production. A crucial step for producing particleboards using scrap particleboards is to break down urea-formaldehyde (UF) resins in the scrap particleboards to obtain separated particles. In this study, liquid hot water (LHW) pretreatment was employed to decompose the UF resins to detach and recover wood particles from the scrap particleboards. The recovered wood particles and fresh industrial wood particles in different proportions were used as the raw material for the particleboard. The physical and mechanical properties of the recycled particleboards were evaluated. The modulus of rupture (MOR), modulus of elasticity (MOE), and internal bond (IB) of the recycled particleboards were lower than those of the particleboards made with fresh wood particles. However, the 2 h thickness swelling (TS) of the recycled particleboards was better than that of the fresh particleboards, indicating that the recycled particleboards were more dimensionally stable. The mechanical properties of the particleboards containing up to 40% recycled wood particles met the minimum Chinese National Standard requirements for general-purpose particleboards. Conclusively, scrap wood particleboards could be utilized as raw material in particleboard production.

From wood waste to recyclable plastic

From wood waste to recyclable plastic

Mechanical and acoustic performance of mortar with partial replacement by biochar from civil construction wood waste at advanced ages

Civil construction generates large amounts of solid waste, most of which are non-toxic, but extremely voluminous, resulting in a contemporary sanitary health problem. Furthermore, cement fabrication, a widely used binding material, is responsible for the emission of 8% of the world’s CO2 into the atmosphere, making it an industry with a great environmental impact. The consumption figures of cement show an significant increasing over the years. Therefore, much research has focused on the search for energy efficiency in the production processes of cement and materials with potential use as additions, allowing the reduction of clinker consumption, the main component of the cement. In this sense, this research made use of wood waste from civil construction, and through the pyrolysis process, partially replaced cement with biochar at high levels compared to existing research, seeking to find an efficient replacement limit and analyzing its sound absorption and mechanical properties at advanced ages. Mortars were produced with levels of 5%, 10%, and 15% (m/m), replacing cement with biochar. The results demonstrated better mechanical performance at advanced ages, up to 30% for compression and 15% for tensile strength with 10% biochar, and lower water absorption by capillarity. Its acoustic performance showed that the samples with biochar did not exhibit properties of a sound-absorbing material.

Early detection of deep-seated smouldering fires in wood waste storage using ERT

Incidents of waste and biofuel fires are common at all stages of the waste recycling chain and have grave implications for business, employees, firefighters, society, and environment. An early detection of waste and biofuel fires in the smouldering stage could save precious lives, resources, and our environment. Existing fire detection methodologies e.g. handheld temperature sensors, IR cameras, gas sensors, and video and satellite-based monitoring techniques have inherent limitations to efficiently detect smouldering fires. An attempt was made to explore the potential of electrical resistivity tomography (ERT) as an alternate tool to address the problem. In the experiments an externally powered resistive wire was employed to initiate the smouldering fire inside the test material (wood pellets, wood shavings, wood fines). Time series of ERT that followed the initiation and development of smouldering were recorded using an automated monitoring instrument setup. The actual geometry of the experimental sample container and electrode setup was integrated in the 3D finite element method (FEM) model grid to perform inverse numerical modelling (inversion) and to develop resistivity tomographic images. The study shows a sharp increase in ratio of resistivity (R/Ro ≥ 50 %) in the test material in the region of smouldering hotspot and demonstrates the potential use of ERT technique for the detection of smouldering hotspots in silos and pile storage of organic material such as wood-based fuels, wood waste, coal, municipal solid waste (MSW), recyclables etc. More research is however required for enabling the use of this technique at the practical scale for different storage conditions.

Comparative Analysis of the Quality and Electrical Energy of Wood Waste Briquettes with Natural (Starch) and Synthetic Adhesives (Synthetic Rubber Adhesive)

On average, small and medium-scale wood processing industries produced at least 2 to 4 cubic meters of wood a day, this production produced 0.25 to 2 m3 of wood waste a day. In fact, this waste can be used as a renewable energy source by processing it into briquettes. This research will produce wood waste briquettes using the pyrolysis method from two types of adhesive, namely starch and synthetic rubber adhesive with a composition ratio of 3:1. Apart from that, the resulting briquettes were tested using a bomb calorimeter to obtain the calorific value, water content, ash content, and volatile matter content, and then compared with the SNI 01-6235-2000 standard. The resulting briquettes were then calculated using mathematical calculations for the potential electrical energy they could generate. From laboratory tests, the calorific value, water content, ash content, and volatile matter content of natural adhesive briquettes were obtained at 5194.44 cal/g, 11.3%, 1.36%, and 40.8%, while synthetic adhesive briquettes respectively had values of 6369.46 cal/g, 4.33%, 2.74%, and 25.54%. From these results, synthetic adhesive briquettes had better calorific value, water content, and volatile matter content compared to natural adhesive briquettes. Apart from that, synthetic adhesive briquettes also had greater energy potential with an energy potential of 7,407 kWh/kg compared to briquettes with natural adhesives which only had a value of 6,041 kWh/kg. Thus it can be concluded that synthetic adhesive briquettes are better quality compared to natural adhesive briquettes because they can generate greater energy, and meet 3 of the 4 test parameters based on SNI while natural adhesive briquettes only meet 2 of the same 4 test parameters

Early life ambient air pollution, household fuel use, and under-5 mortality in Ghana

IntroductionEnvironmental exposures, such as ambient air pollution and household fuel use affect health and under-5 mortality (U5M) but there is a paucity of data in the Global South. This study examined early-life exposure to ambient particulate matter with a diameter of 2.5 µm or less (PM2.5), alongside household characteristics (including self-reported household fuel use), and their relationship with U5M in the Navrongo Health and Demographic Surveillance Site (HDSS) in northern Ghana. MethodsWe employed Satellite-based spatiotemporal models to estimate the annual average PM2.5 concentrations with the Navrongo HDSS area (1998 to 2016). Early-life exposure levels were determined by pollution estimates at birth year. Socio-demographic and household data, including cooking fuel, were gathered during routine surveillance. Cox proportional hazards models were applied to assess the link between early-life PM2.5 exposure and U5M, accounting for child, maternal, and household factors. FindingsWe retrospectively studied 48,352 children born between 2007 and 2017, with 1872 recorded deaths, primarily due to malaria, sepsis, and acute respiratory infection. Mean early-life PM2.5 was 39.3 µg/m3, and no significant association with U5M was observed. However, Children from households using “unclean” cooking fuels (wood, charcoal, dung, and agricultural waste) faced a 73 % higher risk of death compared to those using clean fuels (adjusted HR = 1.73; 95 % CI: 1.29, 2.33). Being born female or to mothers aged 20–34 years were linked to increased survival probabilities. InterpretationThe use of “unclean” cooking fuel in the Navrongo HDSS was associated with under-5 mortality, highlighting the need to improve indoor air quality by introducing cleaner fuels.

Waste Prediction Approach Using Hybrid Long Short-Term Memory with Support Vector Machine

As climate change increases the risk of extreme rainfall events, concerns over flood management have also increased. To recover quickly from flood damage and prevent further consequential damage, flood waste prediction is of utmost importance. Therefore, developing a rapid and accurate prediction of flood waste generation is important in order to reduce disaster. Several approaches of flood waste classification have been proposed by various researchers, however only a few focus on prediction of flood waste. In this study, a Long Short-Term Memory (LSTM) and Support Vector Machine (SVM) approach is adapted to address these challenges. Two different raw datasets were obtained from the “Advancing Sustainable Materials Management: Facts and Figures 2015” source. The datasets were for 9 years (1960, 1970, 1980, 1990, 2000, 2005, 2010, 2014, 2015), and are labelled as the materials generated in the Municipal Waste Stream from 1960 to 2015 and the materials Recycled and Composted in Municipal Solid Waste from 1960 to 2015. The waste types were grouped as paper and paperboard (PP), glass (GI), metals (Mt), plastics (PI), rubber and leather (RL), textiles (Tt), wood (Wd), food (Fd), yard trimmings (YT) and miscellaneous inorganic wastes (IW).

Hydrothermal conversion of mango wood wastes and sugarcane bagasse for biofuel production

Hydrothermal conversion of mango wood wastes and sugarcane bagasse for biofuel production

Pit-lake remediation by chemically activated Chlorocardium rodiei: Simultaneous metal ion removal from acidic waters

The current study investigates the valorization of waste wood from a tropical hardwood found in Guyana (Greenheart – Chlorocardium rodiei) to high surface area activated carbons (AC). We subsequently deployed these adsorbents to sequester Mn 2+, Fe3+, and Al3+ from the acidic waters of a recreational bauxite pit-lake. We studied the impact of activation parameters such as temperature, impregnation ratio and acid concentration on the texture and surface chemistry of ACs and demonstrate that optimized low pH at point-of-zero charge (pHpzc) ACs are efficient adsorbents for the target ions. A mesoporous AC with specific surface area of 2208 m2/g, 11 % surface oxygen and pHpzc of 1.98 was produced under optimized conditions. ACs removed 93–100 % of target ions from pit-lake waters at a native pH of 3.1. Al3+ exerted an antagonistic effect on Mn2+ adsorption in synthetic binary ion systems reducing adsorption by as much as 56 %. The Sips Model fitted the adsorption data best predicting maximum adsorption capacities for Mn2+, Fe3+ and Al3+ of 17.8 mg/g, 23.7 mg/g, and 6.12 mg/g for these low pHpzc optimized materials. These materials show great promise in removing heavy metals from acidic waters.

Effect of Reinforcement Ratio and Particle Size on the Physical and Mechanical Performance of Epoxy Matrix Panels and Waste Wood from Iroko Chlorophora excelsa from Cameroon

The use of local materials developed from natural reinforcements remains a major challenge for many researchers in the development of the industry and the fight against pollution. The wood industry generates large quantities of environmental waste, including Iroko wood. To give Iroko a second life, this study uses Iroko sawdust waste to make an epoxy matrix composite material. The composite was produced using a cold pressing technique based on moving the top and bottom plates to a thickness of 10 mm. On this basis, three particle sizes [t < 0.35[, [0.35–0.63[, and [0.63–1[ were used, as well as three reinforcement (R)/matrix (M) percentages of 50R/50M, 60R/40M, and 70R/30M, where R is the reinforcement percentage and M is the matrix percentage. The physical tests, apparent and real density, porosity, moisture content, water absorption rate, absorption and desorption kinetics, diffusion theory, and activation energy were determined by the gravimetric method. A three-point bending test was carried out in accordance with the ASTM D790 for mechanical tests. The results show that the addition of Iroko particles lightens the material by reducing its density. The hydrophilic nature of Iroko particles increases the absorption rate and porosity, with good diffusion capacity as the particle size and percentage increase. The material produced can be light and porous, with possible applications in thermal insulation. In terms of kinetics, Verma et al.’s model best correlates the experimental desorption points for the 3 isotherms, while Page’s model best correlates the water absorption points. The mechanical results show that Young’s modulus and stress at break decrease with an increase in the reinforcement percentage and particle size. The mechanical results can be used to define the material’s applications in construction and furniture. In accordance with the EN312 standard, the composites produced can be classified as type 2 lightweight materials, suitable for use in dry and damp areas.

Development and Characterization of a Micro-Concrete Based on Wood Waste from Sawmills

Development and Characterization of a Micro-Concrete Based on Wood Waste from Sawmills

Pyrolysis of Specific Non-Recyclable Waste Materials: Energy Recovery and Detailed Product Characteristics.

This study explores the pyrolysis process applied to various non-utilized waste materials, specifically focusing on separated plastics from municipal waste, wood waste (including pallets and window frames), paper rejects, and automotive carpets. Different combinations of these waste materials were subjected to pyrolysis, a process involving high-temperature treatment (600 °C) in a nitrogen atmosphere. The resulting products, including biochar, gas, and liquid fractions, as well as the residual waste materials, underwent comprehensive analysis. The evaluation of pyrolysis products emphasizes their quality, energy content, and potential applications. Notably, the pyrolysis gas derived from the combination of separated municipal plastics and waste wood exhibited the highest calorific value at 49.45 MJ/m3. Additionally, Mixture 2, consisting of plastic and wood waste, demonstrated the highest calorific value for the pyrolysis condensate, reaching 30.62 MJ/kg. Moreover, Mixture 3, benefiting from biochar utilization as a sorbent, displayed the highest iodine value at 90.01 mg/g.

Waste para-rubber wood ash and iron scrap for the sustainable preparation of magnetic Fenton catalyst for efficient degradation of tetracycline

This study introduces a sustainable method of synthesizing a magnetic Fenton catalyst. The use of readily available iron scrap waste and para-rubber wood ash from heating and power plants is innovative and cost-effective. The catalyst is obtained from the precursor materials by pyrolysis. The physicochemical properties of the catalyst were characterized to investigate the effects of different iron-to-ash ratios and pyrolysis temperatures. The Fenton process was investigated through the degradation of tetracycline (TC). A catalyst produced with an iron–ash ratio of 1:2 exhibited exceptional performances with a TC removal rate of up to 90 % within 15 min under optimized conditions. The Fenton catalyst also possessed desirable magnetic properties, enabling easy separation. The stable catalyst could be regenerated and was successfully recycled four times while retaining its efficiency. This research not only addresses environmental concerns but also highlights the potential value of two waste materials in the synthesis of advanced Fenton-like catalysts.

Visible Light-Induced Photocatalytic Degradation of Methylene Blue Using Copper-Doped Carbon Dots One-Step Derived from CCA-Wood

Developing novel eco-friendly broad-spectrum visible light photocatalysts for dye removal is one of the urgent problems for water treatment. Here, copper-doped carbon dots (CDs) were reported to be directly fabricated from chromated copper arsenate (CCA) wood waste for the photocatalytic degradation of the methylene blue dye. The properties of the resulting CDs were thoroughly characterized and analyzed, preceding an investigation into the adsorption kinetics of dye degradation. The kinetic study showed that reactant concentration was the rate-limiting factor. The obtained CDs showed a 151 mg/g photocatalytic degradation capacity. Comparing pure CDs to CDs/TiO2 composites, the former demonstrated higher photodegradation efficiency. This superiority can be attributed to the synergistic action of adsorption and photocatalytic degradation working in tandem. This study prepared Cu doped CDs and elucidated the photocatalysis mechanism of methylene blue degradation by CDs. The photodegradation of organic dyes through CDs derived from waste CCA wood emerges as an eco-friendly, facile, and highly efficient method.

Performance of Eco-Friendly Zero-Cement Particle Board under Harsh Environment

The increasing scarcity of virgin natural resources and the need for sustainable waste management in densely populated urban areas have heightened the importance of developing new recycling technologies. One promising approach involves recycling agricultural waste in construction applications and transforming it into secondary products. This is anticipated to reduce the demand for new resources and lower the environmental impact, aligning with industrial ecology principles. Combined with a low carbon emission binder (i.e., alkali-activated), utilizing agro-waste to produce zero-cement particle boards is a promising method for green construction. Traditionally, particle boards are engineered from wood or agricultural waste products that are pressed and bonded with a binder, such as cement or synthetic resins. However, alternative binders replace cement in zero-cement particle boards to address environmental concerns, such as the carbon dioxide emissions associated with cement production. This study investigated the effects of accelerated aging on the performance of alkali-activated agro-waste particle boards. Accelerated aging conditions simulate natural aging phenomena. Repeated wetting–drying and freezing–thawing cycles increased water absorption and thickness swelling and reduced flexural strength. The thermal performance of the alkali-activated particle boards did not exhibit significant changes. Hence, it was confirmed that agro-waste has a high potential for utilization in producing particle boards provided that the working environment is carefully selected to optimize performance.

Techno-economic Evaluation of Power Generation from Industrial Wood Waste at Raiply Limited in Limbe, Malawi

Techno-economic Evaluation of Power Generation from Industrial Wood Waste at Raiply Limited in Limbe, Malawi