White-rot Fungus Research Articles

Hydrothermal liquefaction aqueous phase mycoremediation to increase inorganic nitrogen availability

Hydrothermal liquefaction aqueous phase (HTL-AP) is a waste product from a thermochemical process where wet biomass is converted into biocrude oil. This nutrient-rich wastewater may be repurposed to benefit society by assisting crop growth after adequate treatment to increase inorganic nitrogen, especially NO3−. This study aims to increase HTL-AP inorganic nitrogen, specifically NH3/NH4+ and NO3−, through fungal remediation for further use in hydroponic systems. Trametes versicolor, a white-rot fungus known for degrading a range of organic pollutants, was used to treat a diluted (5 %) HTL-AP for 9 days. No fungal growth was observed, but T. versicolor activity was suspected by laccase activity throughout cultivation time. NO3−-N and NH3/NH4+-N increased by 17 and 8 times after three days of fungal treatment, which was chosen as the appropriate time for HTL-AP fungal treatment as it resulted in the highest concentration of NO3−-N. The addition of nitrifying bacteria to the fungal treatment resulted in a twofold increase in NO3−-N concentration compared to the fungal treatment alone, indicating an enhancement in treatment efficacy. COD decreased by 51.33 % after 24 h, which may be related to the fungus’ capacity to reduce the concentration of organics in the wastewater; nonetheless, COD increased in the following days, which may be related to the release of fungal byproducts. T. versicolor shows promise as a potential candidate for increasing inorganic nitrogen in HTL-AP. However, future studies should primarily address HTL-AP toxicity, reducing NH3/NH4+-N while increasing NO3−-N, and hydroponics crop production after fungal treatment.

Effects of Orange Peel Extract on Laccase Activity and Gene Expression in Trametes versicolor.

The genome of Trametes versicolor encodes multiple laccase isozymes, the expression of which is responsive to various conditions. Here, we set out to investigate the potential of orange peel extract as an inducer of laccase production in this white-rot fungus, in comparison to the previously identified inducing chemical compound, veratryl alcohol. For four geographically distinct T. versicolor strains, a positive correlation has been observed between their oxidative activity and incubation time in liquid cultures. The addition of 20% orange peel extract or 5 mM veratryl alcohol caused a rapid increase in the oxidative potential of T. versicolor M99 after 24 h, with a more pronounced effect observed for the orange peel extract. To elucidate the underlying molecular mechanisms of the induced laccase activity, a transcriptional gene expression analysis was performed for the seven individual laccase genes in T. versicolor, revealing the upregulation of several laccase genes in response to the addition of each inducer. Notably, the gene encoding TvLac5 demonstrated a substantial upregulation in response to the addition of 20% orange peel extract, likely contributing to the observed increase in its oxidative potential. In conclusion, our results demonstrate that orange peels are a promising agro-industrial side stream for implementation as inducing agents in large-scale laccase production with T. versicolor.

Fungal behavior and recent developments in biopulping technology.

Biological pretreatment of wood chips by fungi is a well-known approach prior to mechanical- or chemical pulp production. For this biological approach, a limited number of white-rot fungi with an ability to colonize and selectively degrade lignin are used to pretreat wood chips allowing the remaining cellulose to be processed for further applications. Biopulping is an environmentally friendly technology that can reduce the energy consumption of traditional pulping processes. Fungal pretreatment also reduces the pitch content in the wood chips and improves the pulp quality in terms of brightness, strength, and bleachability. The bleached biopulps are easier to refine compared to pulps produced by conventional methodology. In the last decades, biopulping has been scaled up with pilot trials towards industrial level, with optimization of several intermediate steps and improvement of economic feasibility. Nevertheless, fundamental knowledge on the biochemical mechanisms involved in biopulping is still lacking. Overall, biopulping technology has advanced rapidly during recent decades and pilot mill trials have been implemented. The use of fungi as pretreatment for pulp production is in line with modern circular economy strategies and can be implemented in existing production plants. In this review, we discuss some recent advances in biopulping technology, which can improve mechanical-, chemical-, and organosolv pulping processes along with their mechanisms.

OPFR removal by white rot fungi: screening of removers and approach to the removal mechanism.

The persistent presence of organophosphate flame retardants (OPFRs) in wastewater (WW) effluents raises significant environmental and health concerns, highlighting the limitations of conventional treatments for their remotion. Fungi, especially white rot fungi (WRF), offer a promising alternative for OPFR removal. This study sought to identify fungal candidates (from a selection of four WRF and two Ascomycota fungi) capable of effectively removing five frequently detected OPFRs in WW: tributyl phosphate (TnBP), tributoxy ethyl phosphate (TBEP), trichloroethyl phosphate (TCEP), trichloro propyl phosphate (TCPP) and triethyl phosphate (TEP). The objective was to develop a co-culture approach for WW treatment, while also addressing the utilization of less assimilable carbon sources present in WW. Research was conducted on carbon source uptake and OPFR removal by all fungal candidates, while the top degraders were analyzed for biomass sorption contribution. Additionally, the enzymatic systems involved in OPFR degradation were identified, along with toxicity of samples after fungal contact. Acetate (1.4 g·L-1), simulating less assimilable organic matter in the carbon source uptake study, was eliminated by all tested fungi in 4 days. However, during the initial screening where the removal of four OPFRs (excluding TCPP) was tested, WRF outperformed Ascomycota fungi. Ganoderma lucidum and Trametes versicolor removed over 90% of TnBP and TBEP within 4 days, with Pleorotus ostreatus and Pycnoporus sanguineus also displaying effective removal. TCEP removal was challenging, with only G. lucidum achieving partial removal (47%). A subsequent screening with selected WRF and the addition of TCPP revealed TCPP's greater susceptibility to degradation compared to TCEP, with T. versicolor exhibiting the highest removal efficiency (77%). This observation, plus the poor degradation of TEP by all fungal candidates suggests that polarity of an OPFR inversely correlates with its susceptibility to fungal degradation. Sorption studies confirmed the ability of top-performing fungi of each selected OPFR to predominantly degrade them. Enzymatic system tests identified the CYP450 intracellular system responsible for OPFR degradation, so reactions of hydroxylation, dealkylation and dehalogenation are possibly involved in the degradation pathway. Finally, toxicity tests revealed transformation products obtained by fungal degradation to be more toxic than the parent compounds, emphasizing the need to identify them and their toxicity contributions. Overall, this study provides valuable insights into OPFR degradation by WRF, with implications for future WW treatment using mixed consortia, emphasizing the importance of reducing generated toxicity.

Incubation temperature affects growth and efficacy of white-rot fungi to improve the nutritive value of rice straw

Context A great body of evidence is available on the in vitro efficacy of white-rot fungi (WRF) to degrade lignin in fibre-rich biomass (e.g. wheat straw, wood chips and rice straw (RS)) and improve the biomass’ nutritive value for ruminants. Aims Determining the impact of incubation temperature of three WRF to improve the nutritional value of rice straw. Methods Growth of Ceriporiopsis subvermispora, Lentinula edodes and Pleurotus eryngii on RS for 26 days at the following six temperature regimes: continuous at 24°C, 30°C, 35°C and 40°C, and 3 days at 35°C and 40°C, with subsequent days at 24°C. In a follow-up experiment, improvement in fermentability in buffered rumen fluid of RS treated by the three WRF at 24°C and 30°C for up to 8 weeks was investigated. Key results All three fungi grew at temperatures up to 35°C, with no growth observed at 40°C, with C. subvermispora being more temperature sensitive. There were significant differences in cellulose, hemicellulose and lignin degradation of RS at 24°C and 30°C, with C. subvermispora degrading 69% and 90% of the hemicellulose and lignin respectively at 30°C, greater than at 24°C (55% and 80% respectively). For L. edodes, there were significant differences in cellulose degradation between 24°C and 30°C, with 12% more degradation at 30°C, but not for hemicellulose and lignin. In vitro gas production showed no significant differences between the two incubation temperatures for either of the two fungi. Pleurotus eryngii treatment did not show any improvement in terms of in vitro gas production. Conclusions Treatment of RS with L. edodes and C. subvermispora, but not P. eryngii, is robust and temperature changes will not have a major impact on their efficacy as long as the temperature remains below 30°C. Implications Temperature during the incubation of WRF with rice straw needs to be below 30°C for this biotechnology to be applied in practice.

Decolorization of reactive dyes by the white rot fungus Phanerochaete velutina in presence of Zn and ZnO nanoparticles

AbstractReactive organic dyes are hazardous pollutants that should be removed from wastewater from the textile industry. A remediation of dye polluted wastewater can be achieved by using the oxidative properties of nanomaterials, such as ZnO nanoparticles, or by microorganisms and their dye degrading enzymes. Promising approaches are expected from hybrid strategies, which use more than one approach. However, ZnO nanoparticles are also reported to be an antimicrobial and antifungal agent, which may undermine the decolorization ability of potent organisms, such as white rot fungi. Therefore, in this study we investigated the effects of soluble Zn and ZnO nanoparticles on the decolorization behaviour of the white rot fungus Phanerochaete velutina on commonly used reactive dyes, Reactive Orange 16 and Reactive Green 19. Zn ions led to a low decolorized rate of both dyes at low concentrations and restored the rate at higher Zn concentrations. However, ZnO nanoparticles showed highest decolorization rates, but only in a narrow concentration range. Overall, no toxic or inhibitory effects for decolorization of the dyes were found at the applied concentration of up to 20 mg Zn l−1 indicating that tolerant P. velutina will be suitable for remediation of dyes in multi polluted waste waters.

The potential of White Rot fungi from Indonesia for biodegradation of expanded polystyrene

Expanded polystyrene (EPS) is a polymer known for its remarkable resistance to degradation. Despite several studies conducted on polymer degradation, there is still limited information about the use of White Rot fungi (WRF) to degrade EPS. Our study aims to explore the potential of WRF, which are known to have several isozymes of laccase, a powerful oxidoreductases that potentially could aid in EPS biodegradation. We evaluated the results based on two parameters: (1) morphological damage observed through gravimetry and Scanning Electron Microscope (SEM), and (2) physical, chemical, and mechanical properties of degraded EPS characterized using Universal Attenuated Total Reflection-Fourier Transform Infrared (UATR-FTIR), Thermogravimetric (TGA), Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD), and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GCMS). Our findings revealed that Phelinus noxius BRB 11 and Leiotrametes menziesii BRB 73 were able to resist 10.000 ppm EPS and demonstrated growth rates of 1.86 and 1.22 cm/day, respectively, causing 16 and 1% EPS weight loss after 30 days of incubation. UATR-FTIR analysis showed significant changes in the transmittance value of treated EPS. Phelinus noxius BRB 11 exhibited the highest crystallinity and the lowest styrene percentage area compared to Leiotrametes menziesii BRB 73. Based on all parameters in this study, our results suggest that Phelinus noxius BRB 11 has the best potential as a polymer degradation agent, particularly for EPS.

A New Strategy for the Treatment of Old Corrugated Container Pulping Wastewater by the Ozone-Catalyzed Polyurethane Sponge Biodegradation Process.

Old Corrugated Container (OCC) pulping wastewater has a complex organic composition and high levels of biotoxicity. The presence of dissolved and colloidal substances (DCSs) is a major limiting factor for pulp and paper companies to achieve closed-water recycling. In order to solve this problem, the coupled ozone-catalyzed oxidation and biodegradation (OCB) method was used to treat OCC pulping wastewater in this study. A polyurethane sponge was used as the basic skeleton, loaded with nano TiO2 and microorganisms, respectively, and then put into a reactor. After an 8-min ozone-catalyzed oxidation reaction, a 10-h biological reaction was carried out. The process was effective in removing organic pollutants such as COD and BOD5 from OCC paper whitewater. The removal rates of COD and BOD5 were 81.5% and 85.1%, respectively. By using the polyurethane sponge to construct a microenvironment suitable for microbial growth and metabolism, this study successfully applied and optimized engineered bacteria-white rut fungi (WRF)-in the system to achieve practical degradation of OCC pulping wastewater. Meanwhile, the biocompatibility of different microbial communities on the polyurethane sponge was analyzed by examining the degradation performance of OCC pulping wastewater. The structure of microbial communities loaded on the polyurethane sponge was analyzed to understand the degradation mechanism and microbial reaction behavior. White-rot fungi (Phanerochaete) contributed more to the degradation of OCC wastewater, and new strains adapted to OCC wastewater degradation were generated.

Experimental study on the mechanism of coal spontaneous combustion inhibition by degradation of white-rot fungus

To investigate the mechanism of inhibition of spontaneous combustion of coal by degradation of white-rot fungus, the changes of macroscopic oxidizing characteristics and microstructure of the degraded coal were investigated by the programmed temperature-raising test and the in situ Fourier-transform infrared spectroscopy experiments. The difference in gas production between the degraded coal and the blank samples indicated that the degradation inhibited the oxidation process of coal, and the intensity of the inhibition effect was different at different oxidation stages. The strongest inhibition effect was found in the accelerated oxidation stage, i.e. 80–140 °C. To further analyze the micro-mechanism of the degradation of Phanerochaete chrysosporium affecting the spontaneous combustion of coal, the relative contents of active functional groups in coal samples were compared. The results showed that the degradation affected the relative contents of hydroxyl, aliphatic hydrocarbon, and oxygenated functional groups in coal. Among them, the most significant changes of –OH and –CO- were observed at 80–140 °C. Thus, it was analyzed that Phanerochaete chrysosporium could degrade the macromolecular structure of coal by generating biological enzymes to reduce the number of oxidizable functional groups such as –OH, –CH2, –CH3, –CO-, and so on, thus reducing the risk of spontaneous combustion of coal.

Revisiting the phylogeny and taxonomy of the genus Sidera (Hymenochaetales, Basidiomycota) with particular emphasis on S.vulgaris.

The genus Sidera (Hymenochaetales, Basidiomycota) comprises white-rot, mono- or dimitic fungi with poroid or hydnoid hymenophore. It has a worldwide distribution albeit with fewer species present in the Southern Hemisphere. Although recent studies revealed the existence of several new Sidera species, there are still taxonomic inconsistencies and obscure phylogenetic relationships amongst certain taxa of the genus. In this work, a large number of Sidera collections were used to obtain an updated phylogeny, based on ITS and 28S rDNA sequences by including new material from Mediterranean Europe. The monophyly of the genus was strongly supported and all species with poroid hymenophore formed a highly-supported lineage with two major subclades. In total, 23 putative species were recognised. Amongst those, five are considered to possibly represent entities new to science, but further work is required since they are represented by single specimens or environmental sequences. Examined collections originally named S.lenis from southern Europe were grouped within S.vulgaris. Similarly, several collections under various names were hereby identified as S.vulgaris, including those of the recently described species S.tibetica. Furthermore, a critical discussion (based on morphoanatomical findings) is made on the key features that could be used to distinguish S.lenis from S.vulgaris.

Mycelium-based biomimetic composite structures as a sustainable leather alternative

Fungi, the main destructors of bio-waste, are opening up a new field for bio-based materials that contribute to a more eco-friendly future. In the fashion industry, using mycelium as a substitute for leather seems particularly promising. However, research has not yet been able to imitate the properties of leather. To this end, the mycelium of various white-rot fungi (Fomesfomentarius, Pleurotuseryngii, Trametesversicolor, and, as a control, the brown-rot fungus Fomitopsispinicola) was characterised. The biomimetic techno-pull approach was used to find suitable reinforcements like needle felts or woven fabrics made from regenerated cellulose fibres for the mycelium that increases tensile strength. Two methods to produce composite materials were tested: mycelial pulp grown on a liquid medium and mycelium grown directly on a reinforcement soaked with the same liquid. Overall, mechanical characteristics from purely cultured mycelium will not necessarily reflect the same characteristics of the fungus in an embedded fibre reinforcement. Nevertheless, both methods have resulted in promising materials, with F.fomentarius pulp and T.versicolor on needle felt, outperforming the tensile strength of artificial leather and Reishi™ from MycoWorks.

Influence of metals on lignocellulolytic enzyme production and metal removal by Phlebia brevispora in a wheat straw based fixed‐bed bioreactor

AbstractHeavy metals contamination poses a significant environmental threat, which requires the development of eco‐friendly bioremediation techniques. Present research work was conducted using wheat straw in submerged conditions for the growth of white rot fungus, Phlebia brevispora in the presence of varying concentrations of Cd, Pb, Ni, and Cr. The lignocellulolytic enzyme production ability of fungus was monitored. A wheat straw‐based fixed‐bed bioreactor was designed to treat metal‐containing water in continuous mode. The fungus showed a positive influence on laccase production, cellulase production, and lignin peroxidase activity. As observed through atomic absorption spectroscopy (AAS), Cr removal efficiency was 78%–80%, regardless of the initial metal concentration. The Cr was also found on the surface of fungal mycelium as per the results obtained from SEM–EDX. The continuous bioreactor achieved 98%–99% metal removal, making it a natural and cost‐effective solution for metal removal from wastewater using P. brevispora.

Composites of sodium alginate based - Functional materials towards sustainable adsorption of benzene phenol derivatives - Bisphenol A/Triclosan

The present study evaluates the adsorption efficiency of low-cost carbonaceous adsorbents as fly ash (FA), saw dust biochar (SDB) (untreated and alkali - treated), live/dead pulverized white rot fungus Hypocrea lixii biomass encapsulated in sodium alginate (SA) against the commercially available activated carbon (AC) and graphene oxide (GO) SA beads for removal of benzene phenol derivatives - Bisphenol A (BPA)/triclosan (TCS). Amongst bi - and tri - composites SA beads, tri-composite beads comprising of untreated flyash - dead fungal biomass - sodium alginate (UFA - DB - SA) showed at par results with commercial composite beads. The tri - composite beads with point zero charge (Ppzc) of 6.2 was characterized using FTIR, XRD, surface area BET and SEM-EDX. The batch adsorption using tri - composite beads revealed removal of 93% BPA with adsorption capacity of 16.6 mg/g (pH 6) and 83.72% TCS with adsorption capacity of 14.23 mg/g (pH 5), respectively at 50 ppm initial concentration with 6 % adsorbent dose in 5 h. Freundlich isotherm favoring multilayered adsorption provided a better fit with r2 of 0.9674 for BPA and 0.9605 for TCS respectively. Intraparticle diffusion model showed adsorption of BPA/TCS molecules to follow pseudo - second order kinetics with boundary layer diffusion governed by first step of fast adsorption and intraparticle diffusion within pores by second slow adsorption step. Thermodynamic parameters (ΔH°, ΔS°, ΔG°) revealed adsorption process as exothermic, orderly and spontaneous. Methanol showed better desorbing efficiency leading to five cycles reusability. The phytotoxicity assay revealed increased germination rate of mung bean (Vigna radiata) seeds, sprinkled with post adsorbed treated water (0 h, 5 h and 7 h) initially spiked with 50 ppm BPA/TCS. Overall, UFA - DB - SA tri - composite beads provides a cost effective and eco - friendly matrix for effective removal of hydrophobic recalcitrant compounds.

Fungal Bioremediation of the β-Lactam Antibiotic Ampicillin under Laccase-Induced Conditions.

Due to widespread overuse, pharmaceutical compounds, such as antibiotics, are becoming increasingly prevalent in greater concentrations in aquatic ecosystems. In this study, we investigated the capacity of the white-rot fungus, Coriolopsis gallica (a high-laccase-producing fungus), to biodegrade ampicillin under different cultivation conditions. The biodegradation of the antibiotic was confirmed using high-performance liquid chromatography, and its antibacterial activity was evaluated using the bacterial growth inhibition agar well diffusion method, with Escherichia coli as an ampicillin-sensitive test strain. C. gallica successfully eliminated ampicillin (50 mg L-1) after 6 days of incubation in a liquid medium. The best results were achieved with a 9-day-old fungal culture, which treated a high concentration (500 mg L-1) of ampicillin within 3 days. This higher antibiotic removal rate was concomitant with the maximum laccase production in the culture supernatant. Meanwhile, four consecutive doses of 500 mg L-1 of ampicillin were removed by the same fungal culture within 24 days. After that, the fungus failed to remove the antibiotic. The measurement of the ligninolytic enzyme activity showed that C. gallica laccase might participate in the bioremediation of ampicillin.

Biodegradation of Trichloroethylene by Trametes versicolor and its Physiological Response to Contaminant Stress.

Trichloroethylene (TCE) poses a potentially toxic threat to humans and the environment and widely exists in contaminated sites. White rot fungi effectively degrade refractory pollutants, while a few research studies use white rot fungi to degrade TCE. In this study, we investigated TCE biodegradation by white rot fungi and the potential influencing factors in the environment and attempted to research the effect of TCE on the physiological characteristics of white rot fungi. White rot fungi (Trametes versicolor, Pseudotrametes gibbosa, Pycnoporus sanguines and Pleurotus ostreatus) were added to the liquid medium for shock culture. The results revealed that T. versicolor exhibited the most pronounced efficacy in removing TCE, with a degradation rate of 81.10% within a 7 d period. TCE induces and is degraded by cytochrome P450 enzymes. High pH and Cr(VI) adversely affected the effectiveness of the biodegradation of TCE, but the salinity range of 0-1% had less effect on biodegradation. Overall, the effectiveness of degradation of TCE by T. versicolor has been demonstrated, and it provides a reference for the application prospects of white rot fungi in TCE-contaminated soils.

How lignocellulose degradation can promote the quality and function of dietary fiber from bamboo shoot residue by Inonotus obliquus fermentation

Lignocellulose constitutes the primary component of dietary fiber. We assessed how fermenting bamboo shoot residue with the medicinal white-rot fungus Inonotus obliquus affected the yield, composition, and functional attributes of dietary fiber by altering bamboo shoot residue lignocellulose's spatial structure and composition. I. obliquus secretes lignocellulolytic enzymes, which effectively enhance the degradation of holocellulose and lignin by 87.8% and 25.5%, respectively. Fermentation led to a more porous structure and reduced crystallinity. The yield of soluble dietary fiber increased from 5.1 g/100 g raw BSR to 7.1 g/100 g 9-day-fermented bamboo shoot residue. The total soluble sugar content of dietary fiber significantly increased from 9.2% to 13.8%, which improved the hydration, oil holding capacity, in vitro cholesterol, sodium cholate, and nitrite adsorption properties of dietary fiber from bamboo shoot residue. These findings confirm that I. obliquus biotransformation is promising for enhancing dietary fiber yield and quality.

Bioremediation of 2,4,6-trichlorophenol by extracellular enzymes of white rot fungi immobilized with sodium alginate/hydroxyapatite/chitosan microspheres

Hydroxyapatite, a calcium phosphate biomass material known for its excellent biocompatibility, holds promising applications in water, soil, and air treatment. Sodium alginate/hydroxyapatite/chitosan (SA-HA-CS) microspheres were synthesized by cross-linking sodium alginate with calcium chloride. These microspheres were carriers for immobilizing extracellular crude enzymes from white rot fungi through adsorption, facilitating the degradation of 2,4,6-trichlorophenol (2,4,6-TCP) in water and soil. At 50 °C, the immobilized enzyme retained 87.2% of its maximum activity, while the free enzyme activity dropped to 68.86%. Furthermore, the immobilized enzyme maintained 68.09% of its maximum activity at pH 7, surpassing the 51.16% observed for the free enzyme. Under optimal conditions (pH 5, 24 h), the immobilized enzymes demonstrated a remarkable 94.7% removal rate for 160 mg/L 2,4,6-TCP, outperforming the 62.1% achieved by free crude enzymes. The degradation of 2,4,6-TCP by immobilized and free enzymes adhered to quasi-first-order degradation kinetics. Based on LC-MS, the plausible biodegradation mechanism and reaction pathway of 2,4,6-TCP were proposed, with the primary degradation product identified as 1,2,4-trihydroxybenzene. The immobilized enzyme effectively removed 72.9% of 2,4,6-TCP from the soil within 24 h. The degradation efficiency of the immobilized enzyme varied among different soil types, exhibiting a negative correlation with soil organic matter content. These findings offer valuable insights for advancing the application of immobilized extracellular crude enzymes in 2,4,6-TCP remediation.

Degradation of textile polyazodyes by Polyporus ciliatus laccase produced in peanut shell solid medium: purification and characterization

This study describes decolorization of reactive sulfonated azoic dye Direct Blue 71, one of the recalcitrant and highly used industrial dyes, by Polyporus ciliatus derived laccase. Agro-industrial wastes are increasingly used as substrates for laccase production from white rot fungi through solid-state fermentation (SSF). Peanut shell (PS) is an attractive substrate for laccase production, and SSF is an adequate strategy for that purpose. It has been employed as a novel support-substrate for laccase production by Polyporus ciliatus under solid-state fermentation. The highest laccase yield of 1260 U/ml was attained using PS after 13 days of incubation at 30°C. The purified laccase (55 kDa) showed maximum activity at pH 3 and 60°C. The extracellular laccase enzyme was purified 67.6-fold to a specific activity of 1466 U/mg by a Mono-Q anion-exchange column. The purified enzyme Km value was found to be 24 µM, while the Vmax value was observed to be 0.96 µM s-1 with ABTS as a substrate. It had high thermotolerance and pH stability and was resistant to several metal ions including copper, cadmium, and iron. P. ciliatus pure laccase showed high potential for the decolorization and detoxification of the reactive sulfonated azoic dye Direct Blue 71, which suggested that this enzyme could be used for textile effluent treatment.

Potential of White Rot Fungi from Berbak-Sembilang National Park, Indonesia for Decolorization and Detoxification Commercial Direct Dyes

Commercial direct dyes are frequently employed in the dyeing of Jumputan, a traditional craft originating from South Sumatra, Indonesia. The introduction of synthetic dyes into the environment can have a detrimental impact on ecosystem stability, necessitating the implementation of remedial measures. There has been a growing interest in the utilization of White Rot Fungi (WRF) as a viable biological agent for the purpose of decolorizing and detoxifying synthetic colors. However, it is imperative to investigate the isolated WRF from Berbak-Sembilang National Park (TNBS) due to the varying capacities of decolorization and detoxification exhibited by each WRF. The study involved 5 WRF from TNBS screened in solid media, and grown in a liquid medium containing commercial direct dyes (direct turquoise, direct orange and direct yellow). WRF grown on liquid medium contains a single dye, mixture dyes and temperature characterization. It measured decolorization, biomass and enzyme activities. Toxicity is measured by the BSLT method. The findings indicated that 3 specific fungi, namely Phellinus noxius (BRB 11), Lentinus sajor-caju (BRB 12) and Leotrametes menziesii (BRB 73), exhibited a significant capacity to remove the color from both individual and mixture of direct dyes through the production of laccase and MnP enzymes. The optimal temperature for decolorization of the mixture of direct dyes was 35 °C for BRB 11 (61.4 %) and BRB 73 (60.7 %), whereas BRB 12 (47.4 %) exhibited optimal temperature at 30 °C. The toxicity assay conducted using A. salina showed a progressive rise in the LC50 value, from 15.37 mgL−1 in the control group to a range of 21.63 - 35.84 mgL−1 in the treated group, indicating a detoxification process. However, the most toxic isolate was BRB 12. This study proposes the potential of 2 isolates, Phellinus noxius (BRB 11) and Leotrametes menziesii BRB 73, from TNBS for degradation of single and mixture dye wastewater in the environment. HIGHLIGHTS The discovery of 3 White Rot Fungi from TNBS (Indonesia) has the ability to remove color and reduce the level of toxicity of commercial direct dyes, both individual and mixture of commercial direct dyes. Uncovering one of White Rot Fungi has not been widely published for decolorization and detoxification commercial direct dyes, namely Leotrametes menziesii (BRB 73). The optimal temperature was 35 °C for decolorization of commercial direct dyes by Phellinus noxius (BRB 11) and Leotrametes menziesii (BRB 73) GRAPHICAL ABSTRACT

By the force of decay: A green strategy to fabricate white rot fungal degraded wood for sustainable oil/water separation

Two species of white rot fungi, Coriolus versicolor（Cv）and Fomes fomentarius (Ff), were successfully applied to selectively degrade lignin of balsa wood, which caused weight loss of 15.66% and 9.66% respectively. Subsequently, the remained wood template was impregnated with 1 wt% cuprous oxide modified phenol formaldehyde resin and 4.8 wt% Stearic acid (STA, C17H35COOH), which was endowed with superhydrophobicity, high oil absorption capacity and filtration efficiency up to 8.97 g/g and 95% respectively. It was first time discovered that the absorption capacity of as prepared wood was not decreased but improved with the increase of the recycle times. Characterized by absorption efficiency of chloroform increased from the initial 5.69–8.97 g/g after 84 times repeat oil absorption process. While, the filtration efficiency for chloroform remains above 95% even after 84 cycles. Furthermore, the as modified balsa wood performed desirable photocatalytic degradation efficiency toward methylene blue (MB) more than 95% even after 84 cycles, this multifunctional aspect enhances the material's applicability for various environmental remediation purposes. This work proposed a novel, green and facile strategy to fabricate sustainable oil/water separation material, which has potential to be applied to oil/water separation industry.