Vitro-In Vivo Research Articles

Physiologically Based Pharmacokinetic (PBPK) Modelling for In Vitro-In Vivo Extrapolation: Emphasis on the Use of Dissolution Data

Recently the pharmaceutical sector has witnessed a drastic rise in the advancement and incorporation of computerbased technology into several unit operations. Drug dissolution profiling is an important consideration for the successful development of immediate and extended orally delivered formulations. Physiologically based pharmacokinetic (PBPK) modelling has gained a lot of attention when compared to the one- and two-compartmental modelling in establishing a relationship between the in vitro and in vivo parameters. Moreover, the influence of various factors like food, disease, population variations, transporters, and gastric emptying play a significant part in the in vivo outcome of the dosage form. In silico techniques are capable of addressing these limitations by incorporation of near-to-life replica of the in vivo conditions and are able to provide newer interpretations of conventional dissolution data that cannot be concluded by the generation of pharmacokinetic descriptors alone. This review focuses on the various in silico tools including the theory and studies conducted with dissolution data in recent years.

Formulation of Insulin Self Nanoemulsifying Drug Delivery System and Its In Vitro-In Vivo Study

Particulate delivery system can be used for improving the efficacy of protein and peptide drug. In addition to a polymer-based particulate delivery system, self-nanoemulsifying drug delivery system (SNEDDS), a lipid-based delivery system, is currently developed for either less water-soluble or soluble drugs. This study aims to design SNEDDS for oral insulin administration and its in vitro-in vivo study. The SNEDDS template was designed using D-optimal mixture design and was analyzed using software Design Expert 7.1.5. The obtained optimum template was loaded with insulin and evaluated for its transmittance percentage, emulsification time, particle size, zeta potential, stability, the amount of insulin in vitro diffused across rat intestine, and insulin serum concentration after oral administration. The study results revealed that the optimum template of SNEDDS formula consisted of 10% (w/w) Miglyol 812N, 65% (w/w) Tween 80, and 25% (w/w) propylene glycol. These optimum template then was loaded with insulin and characterized. SNEDDS insulin has particle size of 12.0±1.7 nm, zeta potential of +0.16mV, transmittance of >90%, and emulsification time of < 60 seconds. The stability study showed that SNEDDS insulin was stable from both precipitation and phase separation. The amount of insulin transported from SNEDDS formula in vitro was 32.45±2.03% and non-SNEDDS formula was 10.44±5.04%. In vivo study of SNEDDS insulin produced a significantly increased Cmax, AUC, and F value than insulin non SNEDDS (p < 0.05). In brief, SNEDDS formulation in this study is a promising approach to increase the effectiveness of oral insulin. Insulin is better given orally in SNEDDS formulation than in non SNEDDS formulation.

Time Scaling for In Vitro-In Vivo Correlation: the Inverse Release Function (IRF) Approach.

In vitro-in vivo correlations (IVIVC) are methods used to create a link between biopharmaceutical properties such as dissolution and physiological response such as plasma concentration. Level A IVIVC defines 1:1 relationship between the percent absorbed in vivo and the percent dissolved in vitro. A successful level A IVIVC provides the capacity to predict in vivo behavior based only on in vitro data with application in formulation development and support of biowaivers recognized by regulatory agencies across the world. Level A regression may be complicated due to differences in time scales as well as the lack of coincident times of similar release in vitro and in vivo leading to approximate time-to-time links and subsequent loss of information. Here, a novel method to establish Levy's plot and to provide time scaling for improved IVIVC predictive capacity is presented. The method is mathematically closed and is an inverse release function (IRF) characterizing the single (or more) phases of dissolution/absorption. It uses the complete set of information available from all time points both in vitro and in vivo. An extended-release formulation development situation is presented with three increasing release rate test products compared in a trial versus a reference product. First, the standard level A regression was made. Prediction errors for internal validation were higher than 10% for Cmax. The IRF method was applied to obtain the in vitro times of percentage dissolved equivalent to percentage absorbed. The prediction errors from the IRF level A correlation were nearly negligible.

A Novel Colon-Specific Osmotic Pump Capsule of Panax notoginseng Saponins (PNS): Formulation, Optimization, and In Vitro-In Vivo Evaluation.

In the current study, a novel colon-specific osmotic pump capsule of Panax notoginseng saponins was developed to achieve colon-specific release, a zero-order, thus to promote the efficacy of Panax notoginseng saponins. The capsule was assembled using a semi-permeable capsule shell with contents including Panax notoginseng saponins, sodium chloride (NaCl), and Ludipress. The semipermeable membrane was made of cellulose acetate (CA), along with polyethylene glycol (PEG) 6000 for flexibility and strength, and Eudragit® S100 for colon-specific targeting. The in vitro dissolution test showed an approximately zero-order release of Panax notoginseng saponins over 12h at pH7.8 through the pores on the membrane. Meanwhile, the drug release from the optimal formulation was found to be independent of equipment type or agitation speed. Rather, it depended on mainly the osmotic pressure of the dissolution media. The in vivo test in beagle dogs demonstrated that the relative bioavailability of the current system was 487.42% in comparison to that of the marketed product, yet with a prolonged retention time. The novel controlled delivery system for Panax notoginseng saponins in the current study utilizing colon-specific and osmotic pump system therefore offered the advantages of avoiding stomach and enteric irritation, reducing dosage frequency, minimizing the drug fluctuation in plasma, and improving its oral bioavailability.

In Vitro-In Vivo Predictive Dissolution-Permeation-Absorption Dynamics of Highly Permeable Drug Extended-Release Tablets via Drug Dissolution/Absorption Simulating System and pH Alteration.

Each of dissolution and permeation may be a rate-limiting factor in the absorption of oral drug delivery. But the current dissolution test rarely took into consideration of the permeation property. Drug dissolution/absorption simulating system (DDASS) valuably gave an insight into the combination of drug dissolution and permeation processes happening in human gastrointestinal tract. The simulated gastric/intestinal fluid of DDASS was improved in this study to realize the influence of dynamic pH change on the complete oral dosage form. To assess the effectiveness of DDASS, six high-permeability drugs were chosen as model drugs, including theophylline (pKa1 = 3.50, pKa2 = 8.60), diclofenac (pKa = 4.15), isosorbide 5-mononitrate (pKa = 7.00), sinomenine (pKa = 7.98), alfuzosin (pKa = 8.13), and metoprolol (pKa = 9.70). A general elution and permeation relationship of their commercially available extended-release tablets was assessed as well as the relationship between the cumulative permeation and the apparent permeability. The correlations between DDASS elution and USP apparatus 2 (USP2) dissolution and also between DDASS permeation and beagle dog absorption were developed to estimate the predictability of DDASS. As a result, the common elution-dissolution relationship was established regardless of some variance in the characteristic behavior between DDASS and USP2 for drugs dependent on the pH for dissolution. Level A in vitro-in vivo correlation between DDASS permeation and dog absorption was developed for drugs with different pKa. The improved DDASS will be a promising tool to provide a screening method on the predictive dissolution-permeation-absorption dynamics of solid drug dosage forms in the early-phase formulation development.

In Vitro-In Vivo Extrapolation of OATP1B-Mediated Drug-Drug Interactions in Cynomolgus Monkey.

Hepatic organic anion-transporting polypeptides (OATP) 1B1 and 1B3 are clinically relevant transporters associated with significant drug-drug interactions (DDIs) and safety concerns. Given that OATP1Bs in cynomolgus monkey share >90% degree of gene and amino acid sequence homology with human orthologs, we evaluated the in vitro-in vivo translation of OATP1B-mediated DDI risk using this preclinical model. In vitro studies using plated cynomolgus monkey hepatocytes showed active uptake Km values of 2.0 and 3.9 µM for OATP1B probe substrates, pitavastatin and rosuvastatin, respectively. Rifampicin inhibited pitavastatin and rosuvastatin active uptake in monkey hepatocytes with IC50 values of 3.0 and 0.54 µM, respectively, following preincubation with the inhibitor. Intravenous pharmacokinetics of 2H4-pitavastatin and 2H6-rosuvastatin (0.2 mg/kg) and the oral pharmacokinetics of cold probes (2 mg/kg) were studied in cynomolgus monkeys (n = 4) without or with coadministration of single oral ascending doses of rifampicin (1, 3, 10, and 30 mg/kg). A rifampicin dose-dependent reduction in i.v. clearance of statins was observed. Additionally, oral pitavastatin and rosuvastatin plasma exposure increased up to 19- and 15-fold at the highest dose of rifampicin, respectively. Use of in vitro IC50 obtained following 1 hour preincubation with rifampicin (0.54 µM) predicted correctly the change in mean i.v. clearance and oral exposure of statins as a function of mean unbound maximum plasma concentration of rifampicin. This study demonstrates quantitative translation of in vitro OATP1B IC50 to predict DDIs using cynomolgus monkey as a preclinical model and provides further confidence in application of in vitro hepatocyte data for the prediction of clinical OATP1B-mediated DDIs.

A Model Mechanism-Based Explanation of an In Vitro-In Vivo Disconnect for Improving Extrapolation and Translation.

An improved understanding of in vivo-to-in vitro hepatocyte changes is crucial to interpreting in vitro data correctly and further improving hepatocyte-based in vitro-to-in vivo extrapolations to human targets. We demonstrate using virtual experiments as a means of helping to untangle plausible causes of inaccurate extrapolations. We start with virtual mice that use biomimetic software livers. Previously, using these mice, we discovered model mechanisms that enabled achieving quantitative validation targets while also providing plausible causal explanations for temporal characteristics of acetaminophen hepatotoxicity. We isolated virtual hepatocytes, created a virtual culture, and then conducted dose-response experiments in both culture and mice. We expected to see differences between the two dose-response curves but were somewhat surprised that they crossed because it evidenced that simulated acetaminophen metabolism and toxicity are different for virtual culture and mouse contexts even though individual hepatocyte mechanisms were unchanged. Differences in dose-response curves provide a virtual example of an in vivo-to-in vitro disconnect. We use detailed results of experiments to explain this disconnect. Individual hepatocytes contribute differently to system-level phenomena. In liver, hepatocytes are exposed to acetaminophen sequentially. Relative production of the reactive acetaminophen metabolite is largest (smallest) in pericentral (periportal) hepatocytes. Because that sequential exposure is absent in culture, hepatocytes from different lobular locations do not respond the same. A virtual culture-to-mouse translation can stand as a scientifically challengeable hypothesis explaining an in vivo-to-in vitro disconnect. It provides a framework to develop more reliable interpretations of in vitro observations, which then may be used to improve extrapolations.

Evaluating In Vitro-In Vivo Extrapolation of Toxicokinetics.

Prioritizing the risk posed by thousands of chemicals potentially present in the environment requires exposure, toxicity, and toxicokinetic (TK) data, which are often unavailable. Relatively high throughput, in vitro TK (HTTK) assays and in vitro-to-in vivo extrapolation (IVIVE) methods have been developed to predict TK, but most of the in vivo TK data available to benchmark these methods are from pharmaceuticals. Here we report on new, in vivo rat TK experiments for 26 non-pharmaceutical chemicals with environmental relevance. Both intravenous and oral dosing were used to calculate bioavailability. These chemicals, and an additional 19 chemicals (including some pharmaceuticals) from previously published in vivo rat studies, were systematically analyzed to estimate in vivo TK parameters (e.g., volume of distribution [Vd], elimination rate). For each of the chemicals, rat-specific HTTK data were available and key TK predictions were examined: oral bioavailability, clearance, Vd, and uncertainty. For the non-pharmaceutical chemicals, predictions for bioavailability were not effective. While no pharmaceutical was absorbed at less than 10%, the fraction bioavailable for non-pharmaceutical chemicals was as low as 0.3%. Total clearance was generally more under-estimated for nonpharmaceuticals and Vd methods calibrated to pharmaceuticals may not be appropriate for other chemicals. However, the steady-state, peak, and time-integrated plasma concentrations of nonpharmaceuticals were predicted with reasonable accuracy. The plasma concentration predictions improved when experimental measurements of bioavailability were incorporated. In summary, HTTK and IVIVE methods are adequately robust to be applied to high throughput in vitro toxicity screening data of environmentally relevant chemicals for prioritizing based on human health risks.

In Vitro-In Vivo Correlation Using In Silico Modeling of Physiological Properties, Metabolites, and Intestinal Metabolism

Recently, pharmaceutical research has focused on in vitro-in vivo correlation as a novel challenge, and in silico modeling has been an important component. As in silico models are highly representative of practical use, regulatory agencies such as the US Food and Drug Administration and European Medicines Agency have recognized and utilized in silico modeling as a useful tool; this allows pharmaceutical organizations to use Physiologically Based Pharmacokinetic (PBPK) models for decision-making, which may aid the financial efficiency of a clinical trial. However, some studies have shown differences of up to approximately 40% in pharmacokinetic parameters such as area under the curve or maximum serum concentration between observed and simulated data. Gastroplus™ was used to demonstrate current PBPK simulation. 46 research papers were compared with each other's applications of PBPK simulation. To improve the accuracy of simulation, additional factors may need to be considered, such as precise volume of gastrointestinal sections, specific metabolism of the target drug, and physicochemical data of drug metabolites. Furthermore, the results of these simulations would be extremely valuable to the relevant applications. Simulation programs using Advanced Compartmental Absorption and Transit (ACAT)/PBPK modeling could be a powerful tool for companies performing pre-clinical experiments, and could provide a solution for the ethical issues and economic constraints of clinical trials. If in silico modeling produced more precise results that could closely match clinical data, it could be more readily used to screen drug pharmacodynamics in bodily systems, and the efficiency of clinical trials would be improved. However, simulation programs are currently limited in their accuracy of pharmacodynamic predictions. In developing new drugs, pharmaceutical companies should address this issue in order to improve in silico/PBPK modeling in the future.

In Vitro-In Vivo Dose Response of Ursolic Acid, Sulforaphane, PEITC, and Curcumin in Cancer Prevention.

According to the National Center of Health Statistics, cancer was the culprit of nearly 600,000 deaths in 2016 in the USA. It is by far one of the most heterogeneous diseases to treat. Treatment for metastasized cancers remains a challenge despite modern diagnostics and treatment regimens. For this reason, alternative approaches are needed. Chemoprevention using dietary phytochemicals such as triterpenoids, isothiocyanates, and curcumin in the prevention of initiation and/or progression of cancer poses a promising alternative strategy. However, significant challenges exist in the extrapolation of in vitro cell culture data to in vivo efficacy in animal models and to humans. In this review, the dose at which these phytochemicals elicit a response in vitro and in vivo of a multitude of cellular signaling pathways will be reviewed highlighting Nrf2-mediated antioxidative stress, anti-inflammation, epigenetics, cytoprotection, differentiation, and growth inhibition. The in vitro-in vivo dose response of phytochemicals can vary due, in part, to the cell line/animal model used, the assay system of the biomarker used for the readout, chemical structure of the functional analog of the phytochemical, and the source of compounds used for the treatment study. While the dose response varies across different experimental designs, the chemopreventive efficacy appears to remain and demonstrate the therapeutic potential of triterpenoids, isothiocyanates, and curcumin in cancer prevention and in health in general.

In Vitro-In Vivo Relationship of Amorphous Insoluble API (Progesterone) in PLGA Microspheres.

The mechanism of PRG release from PLGA microspheres was studied and the correlation of in vitro and in vivo analyses was assessed. PRG-loaded microspheres were prepared by the emulsion-evaporate method. The physical state of PRG and microstructure changings during the drug release period were evaluated by powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) respectively. Pharmacokinetic studies were performed in male Sprague-Dawley rats, and the in vivo-in vitro correlation (IVIVC) was established by linear fitting of the cumulative release (%) in vitro and fraction of absorption (%) in vivo. PXRD results indicated recrystallization of PRG during release. The changes of microstructure of PRG-loaded microspheres during the release period could be observed in SEM micrographs. Pharmacokinetics results performed low burst-release followed a steady-released manner. The IVIVC assessment exhibited a good correlation between vitro and in vivo. The burst release phase was caused by diffusion of amorphous PRG near the surface, while the second release stage was impacted by PRG-dissolution from crystal depots formed in microspheres. The IVIVC assessment suggests that the in vitro test method used in this study could predict the real situation in vivo and is helpful to study the release mechanism in vivo.

FAST DISSOLVING TABLETS: A PROMISING APPROACH FOR DRUG DELIVERY

Aim of novel drug delivery system is to enhance safety and efficacy of drug molecules by formulating a convenient dosage form for administration and to achieve better patient compliance. One such approach led to development of fast dissolving tablets. Now-a-days fast disintegrating tablets (FDTs) gaining significance with wide variety of drugs serving many purposes. These are novel types of tablets that disintegrate/dissolve/ disperse in saliva within few seconds (less than 60 seconds) without chewing and additional water. The basic approach used in development of FDTs is the use of superdisintegrants and the elimination of bitterness. FDTs reduces the disadvantages of conventional dosage form especially dysphasia (difficulty in swallowing) in pediatric and geriatric patients. These oral dosage forms have many benefits such as self medication, increased compliance, ease of manufacturing and noninvasive. This review presents description of fast dissolving tablets including need for development, challenges in formulation, suitability of drug candidates, composition, various technologies involved, advantages, disadvantages, and evaluation parameters. Peer Review History: Received 19 August 2017; Revised 28 August; Accepted 5 September, Available online 15 September 2017 UJPR follows the most transparent and toughest ‘Advanced OPEN peer review’ system. The identity of the authors and, reviewers will be known to each other. This transparent process will help to eradicate any possible malicious/purposeful interference by any person (publishing staff, reviewer, editor, author, etc) during peer review. As a result of this unique system, all reviewers will get their due recognition and respect, once their names are published in the papers. We expect that, by publishing peer review reports with published papers, will be helpful to many authors for drafting their article according to the specifications. Auhors will remove any error of their article and they will improve their article(s) according to the previous reports displayed with published article(s). The main purpose of it is ‘to improve the quality of a candidate manuscript’. Our reviewers check the ‘strength and weakness of a manuscript honestly’. There will increase in the perfection, and transparency. Received file: Reviewer's Comments: Average Peer review marks at initial stage: 4.0/10 Average Peer review marks at publication stage: 7.0/10 Reviewer(s) detail: Dr. Ogbonna B. Onyebuchi, Nnamdi Azikiwe University, Awka, Nigeria, summitpharm@yahoo.com Dr. Gulay B Anadolu, Anadolu University, Eskisehir, Turkey, gbuyukko@anadolu.edu.tr Similar Articles: FORMULATION AND EVALUATION OF FAST DISSOLVING TABLETS OF ANTIEPILEPTIC DRUG IN VITRO-IN VIVO BIO-EQUIVALENCE CORRELATION STUDY OF ATENOLOL, AND ITS BRANDS OF IMMEDIATE RELEASE TABLET UNDER BIO-WAIVER CONDITIONS This article has been cited by: Recent developments in orally disintegrating mini tablets Sachin Sarashetti, Vikas Jain, Gowda D V, Pooja Mallya, Satish Babu. International journal of research in pharmaceutical sciences 2020, 11(3), 3606-3612. Pubmed

Development, Validation and Successful Application of an In Vitro-In Vivo Correlation Model for Sustained Release Tablets of Bupropion Hydrochloride

Background: In vitro-in vivo correlation (IVIVC) is a quantitative and reliable relationship between in vitro drug release and in vivo absorption, which is desirable for rational development and optimization of sustained release formulations. The present work demonstrates development and application of IVIVC for 150 mg sustained release tablets of bupropion hydrochloride. Keywords: Bupropion, sustained release, dissolution, deconvolution, IVIVC, validation.

Development, Internal and External Validation of Naproxen Sodium Sustained Release Formulation: an Level A In Vitro-In Vivo Correlation.

The aim of the present study was to develop and validate an in vitro-in vivo correlation (IVIVC) for naproxen sodium-sustained release tablets and to compare their plasma concentrations over time with the immediate-release tablets. In vitro release rate data were obtained for each tablet by using the USP Apparatus II, paddle stirrer at 50 rpm in pH 7.4 phosphate buffer. A four-way crossover study was conducted in 6 healthy subjects by administering naproxen sodium sustained release 375 mg and 500 mg of immediate release tablets. Series of blood samples were collected over 24 hours and estimated by using the validated liquid chromatography tandem-mass spectrometry method. The similarity factor was calculated and it was found that values between, 50 and 100 indicates similarity of the profiles. Assessment of predicted and observed bioavailability was performed and prediction errors (PE) % calculated, as per the Food Drug Administration guidelines, the average absolute PE% of Cmax and AUC of individual formulation was found below 15% for establishment of IVIVC, based on internal prediction strongly suggesting that the naproxen sodium IVIVC models are valid. During external validation the predicted curve for the naproxen sodium sustained-release tablets was found to be identical to immediate release tablets and considered as valid. IVIVC can serve as a surrogate for in vivo bioavailability study and supports biowaivers, supports and validates the dissolution methods and specification settings and assists in quality control during scale-up and post-approval changes. It may be used to predict the variation in site change, process changes and to predict the absorption performance of naproxen sodium products with different release rates.

Microsomal and Cytosolic Scaling Factors in Dog and Human Kidney Cortex and Application for In Vitro-In Vivo Extrapolation of Renal Metabolic Clearance.

In vitro-in vivo extrapolation of drug metabolism data obtained in enriched preparations of subcellular fractions rely on robust estimates of physiologically relevant scaling factors for the prediction of clearance in vivo. The purpose of the current study was to measure the microsomal and cytosolic protein per gram of kidney (MPPGK and CPPGK) in dog and human kidney cortex using appropriate protein recovery marker and evaluate functional activity of human cortex microsomes. Cytochrome P450 (CYP) content and glucose-6-phosphatase (G6Pase) activity were used as microsomal protein markers, whereas glutathione-S-transferase activity was a cytosolic marker. Functional activity of human microsomal samples was assessed by measuring mycophenolic acid glucuronidation. MPPGK was 33.9 and 44.0 mg/g in dog kidney cortex, and 41.1 and 63.6 mg/g in dog liver (n = 17), using P450 content and G6Pase activity, respectively. No trends were noted between kidney, liver, and intestinal scalars from the same animals. Species differences were evident, as human MPPGK and CPPGK were 26.2 and 53.3 mg/g in kidney cortex (n = 38), respectively. MPPGK was 2-fold greater than the commonly used in vitro-in vivo extrapolation scalar; this difference was attributed mainly to tissue source (mixed kidney regions versus cortex). Robust human MPPGK and CPPGK scalars were measured for the first time. The work emphasized the importance of regional differences (cortex versus whole kidney–specific MPPGK, tissue weight, and blood flow) and a need to account for these to improve assessment of renal metabolic clearance and its extrapolation to in vivo.

Clearance Prediction of Targeted Covalent Inhibitors by In Vitro-In Vivo Extrapolation of Hepatic and Extrahepatic Clearance Mechanisms.

The concept of target-specific covalent enzyme inhibitors appears attractive from both an efficacy and a selectivity viewpoint considering the potential for enhanced biochemical efficiency associated with an irreversible mechanism. Aside from potential safety concerns, clearance prediction of covalent inhibitors represents a unique challenge due to the inclusion of nontraditional metabolic pathways of direct conjugation with glutathione (GSH) or via GSH S-transferase-mediated processes. In this article, a novel pharmacokinetic algorithm was developed using a series of Pfizer kinase selective acrylamide covalent inhibitors based on their in vitro-in vivo extrapolation of systemic clearance in rats. The algorithm encompasses the use of hepatocytes as an in vitro model for hepatic clearance due to oxidative metabolism and GSH conjugation, and the use of whole blood as an in vitro surrogate for GSH conjugation in extrahepatic tissues. Initial evaluations with clinical covalent inhibitors suggested that the scaling algorithm developed from rats may also be useful for human clearance prediction when species-specific parameters, such as hepatocyte and blood stability and blood binding, were considered. With careful consideration of clearance mechanisms, the described in vitro-in vivo extrapolation approach may be useful to facilitate candidate optimization, selection, and prediction of human pharmacokinetic clearance during the discovery and development of targeted covalent inhibitors.

Determination of Unbound Partition Coefficient and in Vitro-in Vivo Extrapolation for SLC13A Transporter-Mediated Uptake.

Unbound partition coefficient (Kpuu) is important to an understanding of the asymmetric free drug distribution of a compound between cells and medium in vitro, as well as between tissue and plasma in vivo, especially for transporter-mediated processes. Kpuu was determined for a set of compounds from the SLC13A family that are inhibitors and substrates of transporters in hepatocytes and transporter-transfected cell lines. Enantioselectivity was observed, with (R)-enantiomers achieving much higher Kpuu (>4) than the (S)-enantiomers (<1) in human hepatocytes and SLC13A5-transfected human embryonic 293 cells. The intracellular free drug concentration correlated directly with in vitro pharmacological activity rather than the nominal concentration in the assay because of the high Kpuu mediated by SLC13A5 transporter uptake. Delivery of the diacid PF-06649298 directly or via hydrolysis of the ethyl ester prodrug PF-06757303 resulted in quite different Kpuu values in human hepatocytes (Kpuu of 3 for diacid versus 59 for prodrug), which was successfully modeled on the basis of passive diffusion, active uptake, and conversion rate from ester to diacid using a compartmental model. Kpuu values changed with drug concentrations; lower values were observed at higher concentrations possibly owing to a saturation of transporters. Michaelis-Menten constant (Km) of SLC13A5 was estimated to be 24 μM for PF-06649298 in human hepatocytes. In vitro Kpuu obtained from rat suspension hepatocytes supplemented with 4% fatty acid free bovine serum albumin showed good correlation with in vivo Kpuu of liver-to-plasma, illustrating the potential of this approach to predict in vivo Kpuu from in vitro systems.

Formulation Development, Physicochemical Characterization and In Vitro-In Vivo Drug Release of Vaginal Films.

The purpose of this study was formulation and optimization of vaginal film formulation containing abacavir (ABC), a potent nucleoside reverse transcriptase inhibitor. Vaginal films were prepared by solvent evaporation method using hydroxypropyl methylcellulose (HPMC) blended with polyvinyl pyrrolidone (PVP). Various physicochemical parameters of the prepared films such as drug content, thickness, tensile strength, percentage elongation at break, drug polymer interaction, swelling capacity, folding endurance, bio-adhesion, pH, and moisture content were evaluated with morphological studies. In vitro release study and in vivo release study were also performed. Films exhibited favorable physicochemical properties. The in vitro study showed that HPMC-PVP combination can control the release of abacavir through vaginal films with higher amount of PVP in the formulation resulting in an enhanced drug release rate. During the in vivo study in rabbits, systemic absorption of the drug was noted and the films remained intact for long in vagina without causing any sort of irritations. Thus, in a nutshell, the findings of our experimental work indicate that such films can be considered as a novel drug carrier system for the treatment of AIDS and other sexually transmitted diseases (STDs), and are suitable for local as well as systemic effects.

Population In Vitro-In Vivo Correlation Model Linking Gastrointestinal Transit Time, pH, and Pharmacokinetics: Itraconazole as a Model Drug

To establish an in vitro-in vivo correlation (IVIVC) model for Sporanox and SUBA-itraconazole formulations and to understand the impact of gastrointestinal (GI) pH and transit times on itraconazole dissolution and absorption. IVIVC was developed based on fed/fasted pharmacokinetic data from randomized cross-over trials, in vitro dissolution studies, and prior information about typical and between subject variability of GI pH and transit times. Data were analysed using the population modelling approach as implemented in NONMEM. Dissolution kinetics were described using first order models. The in vivo pharmacokinetics of itraconazole was described with a 2-compartment model with 4-transit absorption compartments. Pharmacokinetic profiles for fasted itraconazole periods were described based on the in vitro dissolution model, in vivo disposition model, and the prior information on GI pH and transit times. The IVIVC model indicated that drug dissolution in the fed state required an additional pH-independent dissolution pathway. The IVIVC models were presented in a 'Shiny' application. An IVIVC model was established and internally evaluated for the two itraconazole formulations. The IVIVC model provides more insight into the observed variability of itraconazole pharmacokinetics and indicated that GI pH and transit times influence in vivo dissolution and exposure.

In Vitro-In Vivo Extrapolation Scaling Factors for Intestinal P-glycoprotein and Breast Cancer Resistance Protein: Part II. The Impact of Cross-Laboratory Variations of Intestinal Transporter Relative Expression Factors on Predicted Drug Disposition.

Relative expression factors (REFs) are used to scale in vitro transporter kinetic data via in vitro-in vivo extrapolation linked to physiologically based pharmacokinetic (IVIVE-PBPK) models to clinical observations. Primarily two techniques to quantify transporter protein expression are available, immunoblotting and liquid chromatography-tandem mass spectrometry. Literature-collated REFs ranged from 0.4 to 5.1 and 1.1 to 90 for intestinal P-glycoprotein (P-gp) and breast cancer resistance protein (BCRP), respectively. The impact of using human jejunum-Caco-2 REFs for P-gp (REFiP-gp) and BCRP (REFiBCRP), generated from the same samples and using different proteomic methodologies from independent laboratories, on PBPK outcomes was assessed. A 5-fold decrease in REFiP-gp for a single oral dose of digoxin resulted in a 1.19- and 1.31-fold higher plasma area under the curve and Cmax, respectively. All generated REFiP-gp values led to simulated digoxin Cmax values within observed ranges; however, combining kinetic data generated from a different laboratory with the 5-fold lower REFiP-gp could not recover a digoxin-rifampicin drug-drug interaction, emphasizing the necessity to obtain transporter-specific kinetic estimates and REFs from the same in vitro system. For a theoretical BCRP compound, with absorption taking place primarily in the jejunum, a decrease in the REFiBCRP from 2.22 (University of Manchester) to 1.11 (Bertin Pharma) promoted proximal intestinal absorption while delaying tmax 1.44-fold. Laboratory-specific differences in REF may lead to different IVIVE-PBPK outcomes. To understand the mechanisms underlying projected pharmacokinetic liabilities, it is important to assess the potential impact of bias on the generation of REFs on an interindividual basis within a target population.