Reflection Loss Value Research Articles

Effect of anisotropy field on the resonance frequency and reflection loss shift characteristics of barium hexaferrite ceramics

Abstract For this study, a modified barium hexaferrite based microwave and radar absorbing material was used. Synthesis and characterization of BaFe(12-2x)(MnTi)xO19 (0.1 ≤ x ≤ 1.0) have been prepared by solid state reaction method. The X-ray diffraction patterns reveal that all samples only crystallized into M-type barium hexaferrite after calcination at 1200 °C. Surface morphology images show that the hexagonal flake-like particle is formed at the initial stages of the Mn-Ti substitution level. The magnetic properties measurement reveals that the variation of magnetization values may vary based on preferable site occupation of Mn4+-Ti2+ cations to replace Fe3+ cations. The significant decrease in field coercivity (Hc) from 3.18 kOe to 0.51 kOe with the increase of Mn-Ti substitution affected the lowering values of field anisotropy (Ha). The maximum reflection loss (RL) positions of BaFe(12-2x)(MnTi)xO19 compositional series are shifted to lower frequency range following the Ha trendlines. The maximum RL value equals to 98.42% microwave absorption at 10.5 GHz has been obtained in x = 1.0 (BaFe10Mn0.5Ti0.5O19) composition.

Shape-Tunable Vanadium selenide/reduced graphene oxide Composites with Excellent Electromagnetic Wave Absorption Performance

The tunable energy gap and distinctive layered configuration of transition metal dichalcogenides (TMDs) has sparked considerable interest in their capabilities for electromagnetic wave absorption. As a significant TMD, vanadium selenide (VSe2) is characterized by a superior electrical conductivity (1 × 10-3 S/m) and an expanded interlayer distance, which are advantageous for electromagnetic wave absorption performance. Nevertheless, the current research on VSe2 in electromagnetic wave absorption is relatively limited. In this study, flower-like VSe2 and shape-tunable VSe2/reduced graphene oxide (rGO) composites were fabricated via a simple solvothermal method, and the effect of their morphology on electromagnetic wave absorption performances was investigated. The VSe2/rGO composites exhibited remarkable electromagnetic wave absorption properties at a thickness of 2.01 mm, with a reflection loss value (RL) of up to -79.50 dB, and an effective absorption bandwidth (EAB) of 5.2 GHz (1.45 mm). This research has identified a novel approach to the study of TMDs in the field of electromagnetic wave absorption.

Fabrication of hollow Fe3O4 microspheres encapsulated by single-walled carbon nanohorns for high-performance microwave absorption

Due to the increasingly serious electromagnetic radiation and pollution problems, it is urgent to develop high-performance electromagnetic wave absorbing materials. Herein, the hollow Fe3O4 microspheres encapsulated by single-walled carbon nanohorns (H-Fe3O4@SWCNHs) have been synthesized via facile solvothermal approach. The obtained H-Fe3O4@SWCNHs composite exhibits a unique hollow core-shell structure and superior microwave absorption performance. When the matching thickness is 2.0 mm, the composite shows a minimum reflection loss value of −42.2 dB at 13.6 GHz and a maximum effective absorption broadband value of 6.2 GHz covering from 11.8 to 18 GHz. The excellent microwave absorption performance of the H-Fe3O4@SWCNHs composite is mainly attributed to the unique hollow core-shell structure, optimal impedance matching, and synergistic effects of dielectric loss and magnetic loss. Therefore, the present work provides a new kind of ideal microwave absorbing material with light weight, thin thickness, wide bandwidth and strong absorption capability for high-performance microwave absorption.

Improvement of microwave absorbing capability on the soft magnetic/hard magnetic/perovskite composites

Abstract This paper reports an increase in the ability to absorb microwaves from a composite made of combination between soft and hard magnetic materials, perovskite material, and an epoxy as matrix of composite, Ni0.5Zn0.5Fe2O4/Ba0.6Sr0.4Fe9.5Al0.5MnTiO19/FeTiO3/epoxy (NBFE) with a wt% ratio of 5:3:2:10. Composite samples were made using the mechanical alloying method with milling techniques and sintered at a temperature of 1000 oC for 5h. NBFE composites were studied to increase the ability to absorb microwaves at 2-18 GHz frequencies with thickness variations of 1 mm and 2 mm. The results obtained, the composite sample Ni0.5Zn0.5Fe2O4/Ba0.6Sr0.4Fe9.5Al0.5MnTiO19/FeTiO3/epoxy has the ability to absorb microwaves with the best reflection loss value -37.47 dB with a bandwidth almost reaches 11.32 GHz in the 2-18 GHz frequency range.

Geometry Dependent Microwave Absorption Properties in Carbonaceous Materials over X-Band Frequencies (8.2-12.4 GHz) for Stealth Applications

: Carbonaceous materials of two different types, viz. spherical nano carbon black (NCB) powder (Brunauer-Emmett-Teller (BET) surface area ~1400 m2/g) and multiwalled carbon nanotube (MWCNT) (BET surface area ~75 m2/g), have been impregnated in room temperature vulcanized (RTV) silicon rubber matrix to study the effect of geometries of filler particles on microwave absorption characteristics, over X-band frequencies (8.2 -12.4 GHz). The rubber-based composites are prepared by dispersion of NCB and MWCNT fillers in the liquid rubber with loading fractions ranging from 0.3-0.9 wt% and 1.1-1.7 wt%, respectively. The dielectric loss tangent (tanδe) profiles were evaluated for the filler-loaded rubber composites at different concentrations. The calculated Reflection loss (RL) profiles suggest that NCB-based rubber provides maximum RL value, (RL)max ~ -20 dB (99.00 % absorption), at a lower filler concentration of 0.5 wt%, as compared to MWCNT. However, the MWCNT-based rubber composite shows enhanced (RL)min values of ~ -29 dB (~99.99% absorption) due to multiple scattering phenomena. The identified NCB and MWCNT-based rubber-based MW absorbers have potential stealth applications for military aerial vehicles.

Bamboo-Based Carbon/Co/CoO Heterojunction Structures Based on a Multi-Layer Periodic Matrix Array Can Be Used for Efficient Electromagnetic Attenuation

With the popularization of wireless communication, radar, and electronic devices, the hidden harm of electromagnetic radiation is becoming increasingly serious. The design of green biomass carbon-based interface heterojunctions based on lightweight porous materials can effectively protect against electromagnetic radiation hazards. In this work, we constructed an anisotropic heterojunction interface with magnetic and dielectric coupling based on a honeycomb-like periodic matrix multi-layer array repeating unit. The removal of lignin components from bamboo through oxidation enriches the impregnation pores and uniform adsorption sites of the magnetic medium. Further, in situ pyrolysis promotes the formation of a large number of electric dipoles at the interface between the magnetic medium and dielectric coupling inside the periodic cell carbon skeleton, enhancing interface polarization and relaxation. Local carrier traps and uneven electromagnetic density enhance dielectric and hysteresis losses, resulting in excellent impedance matching. Therefore, the obtained bamboo-based carbon multiphase composite absorbent has satisfactory electromagnetic loss characteristics. At a thickness of 1.55 mm, the effective absorption bandwidth reaches 5.1 GHz, and the minimum reflection loss (RL) value reaches −54.7 dB. In addition, the far-field radar simulation results show that the sample has an excellent RCS (radar cross-section) reduction of 33.3 dB·m2. This work provides new directions for the diversified development of green biomass and the optimization of the design of magnetic and dielectric coupling in periodic array structures.

Optical transmission, dielectric constants, and gamma shielding performance of Se95-xIn5Prx metallic alloys: Radiation protection applications

Due to the high density of metals, metallic materials such as alloys have the potential to have high gamma-radiation-absorbing abilities. This would make them relevant in a radiation environment as either a shielding material or a radiation sensor. These would, however, depend on their gamma radiation responses. Research aimed at evaluating the gamma response parameters of different glassy alloys that have technical applications is scarce compared to the traditional characterization with respect to optical features, structural evolution, and mechanical strength. In this paper, the optical and radiation shielding abilities of Se95-xIn5Prx (x = 2, 4, and 6) glassy alloys were investigated using standard theoretical techniques. The mass attenuation coefficient (MAC) of the materials was computed using the XCOM software. Reflection loss values are 0.20218, 0.22634, and 0.22908 for SIPr1, SIPr2, and SIPr3, respectively, while the optical transmittance values are 0.66365, 0.63087, and 0.62723 in the same order. The metallization criterion declined when Pr increased in the alloy. The values of MAC ranged from 0.0317 cm2/g to 98.2099 cm2/g for SIPr1, 0.0319 cm2/g to 97.3798 cm2/g for SIPr2 and 0.0322 cm2/g to 96.5372 cm2/g for SIPr3. The Higher attenuation and absorption coefficients were found for Pr-rich alloys. Pr therefore increase the ability of the SIPr-alloy to attenuate and absorb photon energy. The optical parameters of the investigated alloys could be used to identify their optical applications. SIPr3 had comparatively higher shielding ability compared to some known shields and could thus be used for radiation control and protection purposes.

Self-assembly Ti3C2Tx MXene/ZnCo2O4@ZnO heterostructure with Schottky junction for regulating BIEF to enhance microwave absorption

Currently, heterogenous interface engineering on absorbers is shown to boost the electromagnetic wave absorption (EMA) performance effectively. However, challenges remain in investigating the mechanisms by studying heterojunctions between heterogeneous interfaces. Herein, a self-assembly Ti3C2Tx MXene/ZnCo2O4@ZnO (MZCZ) heterostructure with abundant Schottky heterogenous interfaces generating a controllable built-interface electric field (BIEF) effect is fabricated to achieve exceptional EMA ability. The formative BIEF between the unbalanced distribution charges promotes charge separation and migration, increasing polarization loss. Fortunately, the obtained MZCZ1 exhibits the reflection loss (RL) value of −69.78 dB under the ultralow thickness of 1.501 mm and the optimal minimum RL (RLmin) value of −74.41 dB, respectively. The excellent performance can be ascribed to the multiple polarization loss, conduction loss, natural resonance, and exchange resonance characteristics. Moreover, by the Computer Simulation Technology (CST) software, the designed circular cone and circular truncated cone periodicity structure with the MZCZ1 absorber both exhibit a super-wide effective absorption bandwidth (EAB) covering the whole C, X, and Ku band. This study can pioneer a novel approach to developing functional EMA materials and provide a valuable direction for further study of EMA mechanisms at heterogeneous interfaces.

Synthesis of Co3O4@C/Ti3C2Tx MXene composites for enhanced electromagnetic wave absorption

Due to the harmful effects of electromagnetic pollution on human bodies and electronic devices, efficient microwave absorbing materials have garnered significant attention. In this paper, highly efficient microwave-absorbing Co3O4@C/Ti3C2Tx composites were synthesized by a combination of hydrothermal and electrostatic self-assembly methods. Benefiting from the synergistic effects of the multiple reflections in the Co3O4@C core-shell structure and the high conductivity coupled with the large surface area of Ti3C2Tx, the composite material, with a mass ratio of 1: 2, exhibits remarkable wave absorption capabilities, achieving a minimum reflection loss (RL) of −35.2 dB at a thickness of 4.5 mm and an effective absorption bandwidth (EAB) of 7.4 GHz within the 2–18 GHz frequency range. It is noteworthy that the smaller the RL value, the higher the material's absorption performance, and the wider the frequency range covered by the EAB, the better the overall absorption effect. Specifically, an RL value below −10 dB corresponds to an absorption rate of 90 %, which further enhances to 99 % for RL values below −20 dB. The outstanding electromagnetic wave absorption performance of the Co3O4@C/Ti3C2Tx composites can be primarily attributed to the synergy between the multiple reflective absorptions offered by the core-shell structure and the exceptional conductivity and high specific surface area inherent in the MXene material. These findings underscore the promising potential of Co3O4@C/Ti3C2Tx composites for electromagnetic absorption applications and offer a novel perspective for the design of MXene-based magnetic absorption materials.

Impact of chromium substitution on structural, spectroscopic, and dielectric properties of Ba4Ni2Fe36O60 ceramics

Cr-substituted Ni2U hexaferrite series (Ba4Ni2Fe36-xCrxO60for x = 0.0 to x = 2.0 with a step size of 0.5) was prepared via sol-gel auto-combustion route and annealed at 1200 °C for 6 h. The samples were investigated using XRD, FTIR, SEM, XPS, and high frequency (1 MHz–6 GHz) dielectric and microwave absorption measurements (VNA). XRD studies revealed that Cr3+ ions successfully substituted in BaNi2U-type hexaferrite and have a single-phase structure. The average crystallite size decreased while the percentage of porosity increased with the substitution. FTIR spectra confirmed the formation of the hexaferrite phase in all compositions. SEM micrographs revealed that the prepared samples are hexagonal. XPS spectra show the presence of all constituent elements in the samples. The dielectric constant, dielectric loss, and A.C. conductivity of samples was analyzed. Cole-Cole plots with single semicircles of different radii show the grain and grain boundaries affecting the conduction process. Moreover, Cr-substitution enhanced the microwave absorption capability. The hexaferrite sample Ba4Ni2Fe35 Cr1.0O60, with a pellet thickness of 1.81 mm, showed the highest M.W. absorption at 1.09 GHz frequency with a reflection loss (R.L.) value of −55 dB. The hexagonal-shaped morphology, high porosity, and enhanced reflection loss value suggest their use in high-frequency microwave applications.

Comparison of Microwave Adsorpsion of Core-Shell Fe3O4@SiO2 by Different Methods

Abstract In this research, magnetite nanoparticles coated with sillica from rice husk ash (core-shell Fe3O4@SiO2) were synthesized by a modified stöber method through hydrolisis of silica using basic catalyst. Phase composition, morphology and microstructure were characterized using XRD, SEM, and TEM. The result shows that the sillica shell was successfully coated the core of nanoparticles magnetite. Core-shell Fe3O4@SiO2were synthesized using two method, first silica extraction and second through the silica gel. The application on microwave absorption are measured using VNA at the X-band frequency (8-12 GHz). Materials reach a reflection loss value of -34,29 dB at a frequency of 10,98 GHz for the first method (extraction of silica). For the second method (through silica gel), it exhibits two maximum absorptions with a reflection loss value under -20 dB, which are -23,05 dB at a frequency of 10,1 GHz and -25,03 dB at a frequency of 10,98 dB.

Synthesis and high electromagnetic wave absorption performance of carbon-enriched porous SiOC ceramics

The carbon-enriched porous SiOC ceramics with enhanced electromagnetic wave (EMW) absorption properties were synthesized through the hydrothermal method followed by a polymer-derived ceramics (PDCs) process. As the annealing temperature rises from 1200 °C to 1500 ℃, SiC and SiO2 crystals are gradually separated from the porous amorphous SiOC matrix, and the degree of graphitization of free carbon increases. The porous SiOC ceramics annealed at 1400 °C exhibit the presence of SiC, SiO2, turbostratic graphite, and amorphous SiOC phases, which significantly impact the impedance matching and attenuation constant of the material. The minimum reflection loss (RLmin) value of the SiOC ceramics reaches −67.98dB with a matching thickness of 3.19mm and the effective absorption bandwidth (EAB) is 4.45GHz at 1.39mm. The carbon-enriched porous SiOC ceramics with strong absorption capacity and wide absorption bandwidth are primarily owing to appropriate impedance matching and multiple attenuation mechanisms, such as conduction loss, interfacial polarization, and defect-induced polarization, indicating that the SiOC ceramics exhibit significant potential as a high-performance EMW absorbing material.

Construction of 2D/2D heterostructure with porous few layer g-C3N4 and NiCo2O4 nanosheets towards electromagnetic wave absorption

Developing high-performance materials with ultra-high reflection loss (RL ≤ -65 dB) for electromagnetic wave (EMW) absorption is pivotal to address electromagnetic pollution, but it is still challenging. Herein, a two-dimensional (2D)/2D PFL g-C3N4/NiCo2O4 heterostructure with porous few-layer g-C3N4 (PFL g-C3N4) and ultrathin NiCo2O4 nanosheets has been prepared by self-assembly, hydrothermal reaction, and calcination strategies. The 2D/2D heterostructure exhibits extraordinary EMW absorption property, achieving a reflection loss (RL) value of -68.59 dB and an effective absorption bandwidth (EAB) of 1.92 GHz at a matching thickness of 2.5 mm. As expected, the porous few layer g-C3N4 nanosheets provide rich interface which increases multiple reflection paths and enhances the conduction loss. The cooperative effects of magnetic loss, dielectric loss, and impedance matching contribute to the exceptional EMW absorption property of PFL g-C3N4/NiCo2O4 (2D/2D) heterostructure. The potential of PFL g-C3N4/NiCo2O4 in actual radar stealth is verified through radar scattering cross-section (RCS) simulation. This work paves the way for utilizing 2D/2D heterostructure as an ultra-efficient EMW absorbers.

MOFs-derived copper selenides nanoparticles implanted in carbon matrix for broadband electromagnetic wave absorption

Selenide-based functional composites materials demonstrated tunable dielectric properties and heterogeneous interface design, which has been widely studied in electromagnetic (EM) wave absorption field. Herein, Metal-organic frameworks (MOFs) derived carbon coating copper selenide (Cu2-XSe@C) composites were successfully fabricated by using the Cu-MOFs as precursor. After reacting with the gaseous Se in the selenization annealing process, the metal host was converted into the Cu2-XSe nanoparticles, where embodied in the carbon matrix transformed from the organic linker. Based on the tunning dielectric property and building heterogeneous interface, MOFs-derived Cu2-XSe@C composites displayed outstanding EM wave absorption performance. Though the conduction loss, interfacial and dipole polarization behaviors, the minimum reflection loss (RLmin) value of Cu2-XSe@C-600 composites reached to −74.3 dB at 11.7 GHz when the thickness is 2.0 mm. The efficient absorption bandwidth (EAB) can be regulated via controlling the applied thickness. When the thickness is 2.3 mm, above-mentioned Cu2-XSe@C-600 got the broadest absorption performance with the EAB of 5.5 GHz from the 7.7–13.2 GHz, covering the whole X-band. Therefore, MOFs-derived selenide-based composites shed a new design strategy for constructing broadband EM wave absorption, especially in radar stealth applications.

One-step fabrication of a novel fiber-based absorber for flexible, tunable and boosted microwave absorption

The increasingly intricate electromagnetic environment necessitates higher anti-electromagnetic interference capabilities for electronic devices, thereby demanding a flexible absorbing material that can adapt to multiple forms, is lightweight, and exhibits excellent electromagnetic wave (EMW) absorption properties. In this study, we have developed a novel flexible absorbing material (FAM) based on glass-coated amorphous magnetic fibers (SFs) and Dallenbach-like absorbing structures through wet forming technology. By combining high-performance absorbing fiber with textile structures, the FAM demonstrates EMW absorption performance along with lightweight flexibility and shape adaptability. This paper explores the influence of process parameters in wet forming technology on FAM formation; as well as examines the construction of broadband absorbers through structural optimization. A single-layer FAM with a thickness of 1.7 mm (SFs length 8 mm, content 3 g/m2) achieves an impressive reflection loss (RL) value of −60.1 dB at 11.6 GHz. Furthermore, optimized multi-layer FAM attains effective absorption bandwidth (EAB: RL ≤ −5 dB) across a wide range from 3–14 GHz. This work presents a new approach for developing ’lightweight, thin, wide, and strong’ absorbing materials based on fiber and textile structures which holds significant implications for civilian electromagnetic interference protection as well as military electromagnetic stealth technology.

Structural modification of mesoporous lanthanum oxide into 3D coral-like and nano needle-like structure for effective broadband microwave absorbing materials☆

Structural modification of three dimensional (3D) materials for the application of dielectric loss-based microwave absorbing materials (MAMs) usually relies on intricate synthesis process and can pose challenges in terms of scalability and mass production for practical application. In this work, we reported a successful attempt in modifying the 3D structure of mesoporous lanthanum oxide (La2O3) for effective broadband MAMs candidate via simple co-precipitation process. The inclusion of cetyl-trimethylammonium bromide (CTAB) and hydrothermal aging treatment result in a significant transformation of La2O3 particles from their original polygonal form to a 3D coral-like and nano needle-like structure. The utilization of CTAB and hydrothermal aging results in the increase of surface area and a two-fold increase in pore volume of the resulting La2O3. Due to its unique 3D structure, the 3D coral-like and nano needle-like La2O3 materials possess a broadband electromagnetic (EM) wave absorption characteristic with the effective absorption bandwidth (EAB) covering the C-band frequency range. Specifically, in the La2O3 C-H sample (with CTAB – with hydrothermal), it exhibits strong EM wave absorption with a reflection loss (RL) value of –33.07 dB which equals to 99.95% EM wave absorption at a thickness of only 1.50 mm. The detailed analysis of EM wave absorption properties reveals that the improvement of La2O3 materials to attenuate EM wave energy arises from the dielectric loss phenomenon, the enhanced interfacial polarization, multiple reflections mechanism, and conduction loss mechanism induced by the 3D structural formation of the La2O3 structure. This work proposes a novel and efficient approach in synthesizing and modifying 3D materials for effective broadband EM wave absorption.

Microwave absorption properties of one-step formed CNTs/Fe3O4-carbonyl iron superflexible buckypaper by directional pressure filtration

In order to realize the integration of structure and function of microwave-absorbing materials, carbon nanotubes/magnetic nanoparticle buckypaper (CNT/MNP BP) self-supporting, ultra-flexible, ultra-thin and ultra-light composites were prepared by composing CNTs with MNPs through directional pressure filtration technology. The BP composite, with a bulk density of 0.62 g/cm3 and a thickness of 0.21 mm, can be uninterruptedly tightly wound around a 4 mm diameter glass rod many times without structural damage. The microwave-absorbing properties and magnetic properties of the CNT/MNP composites with different compositions and contents were systematically analyzed. The CNT-Fe3O4 Buckypaper with 33.3 wt% Fe3O4 content (CF33.3 %) has the best electromagnetic wave absorption capability, with a minimum reflection loss value of −52.01 dB and an effective absorption bandwidth of 4.08 GHz. The VSM test shows that the saturation magnetization strength of CF33.3 % is 38.4 emu/g. The excellent electromagnetic wave absorption performance is attributed to the polarization and conduction losses of CNTs, natural resonance, exchange resonance and eddy current losses of MNPs, and multiple scattering and reflection within the porous network structure of the composites. The CNTs and MNPs has good dispersion in the buckypaper, where CNTs construct a superflexible skeleton besides an excellent conductive network. The self-supporting superflexible CNT/MNP BP composites have a good application prospect in the field of wearable electronic devices in the future.

Fabrication of core-shell Fe4N@C with sea-island structure by one-step nitriding method as efficient electromagnetic wave composite absorber

Porous structure design and magnetic-dielectric composite are effective ways to develop electromagnetic wave (EMW) absorbing materials with light-weight, thin-thickness, large effective absorption bandwidth (EAB), and strong reflection loss (RL). This article presents a simple one-step nitridation method for synthesizing Fe4N@C compounds with sea-island like and core-shell structures. The optimal RL value of Fe4N@C is up to -60.01dB, and the EAB (frequency range for RL< -10 dB) is 5GHz (11.1-16.1GHz) with a thickness of 1.9mm. The EAB reaches 5.5GHz (12.5-18GHz) when the matching thickness is 1.7mm. The multi-component design achieved excellent impedance matching properties. The carbon frame connects the core-shell particles to form a three-dimensional porous structure, providing multiple reflection losses. Therefore, this work provides a convenient way to design efficient and lightweight EMW absorbers with special structures.

High electromagnetic wave absorption performance from all-scale hierarchically defective Ni-Mn-Co-Cu-Al high entropy alloys@carbon

All-scale hierarchical defects induced by structural designing from unit cell to mesoscale play a significant role in oscillating and dissipating electromagnetic wave energy under external microwave radiation. To construct such all-scale hierarchical defects, hereby, high-entropy alloy nanoparticles coated by microscale carbon (HEA@C) with a core–shell structure were obtained by carbonizing Ni-Mn-Co-Cu-Al metal–organic. Thus, all-scale hierarchical defects were gained, including lattice distortion and nanotwins caused by the high entropy effect, vacancy and topological defects within carbon, and the heterojunction between high entropy nanoparticles and carbon. These all-scale hierarchical defects combined with the magnetic and conductive nature of HEA@C enable us to achieve a high electromagnetic wave absorption performance, with a reflection loss (RLmin) value of −52.36 dB and an effective absorption bandwidth (EAB) of 5.01 GHz. It implies that HEA@C should be an effective electromagnetic wave (EMW) absorber.

Multi-heterogeneous interfaces boost dielectric polarization in PBA-derived Co/MnO@NC ternary composites for electromagnetic wave absorption

The elaborate construction of multi-component composites has been deemed as a promising strategy to enhance dielectric polarization response capability in the preparation of highly efficient microwave absorbers. However, the rational design and integration of homogeneous composites with diverse components continues to pose a great challenge. Herein, we propose a straightforward self-assembly-carbonization strategy for fabricating Co/MnO@NC ternary composites derived from CoMn-Prussian Blue Analogous precursors, featuring enriched heterogeneous interfaces and balanced magneto-electric coupling synergy. The ternary composites effectively introduce diverse dissipation mechanisms, including interfacial polarization behavior originated from the constructed heterogeneous interfaces, dipole polarization relaxation triggered by atomic defects, and optimized magnetic loss ability from well-dispersed metallic Co species. Benefiting from these advantages, the Co/MnO@NC composites demonstrate superior electromagnetic wave absorption performances, with a minimum reflection loss value of −61.37 dB at the thickness of 3.5 mm and effective frequency absorption bandwidth of 6.32 GHz, covering the full Ku-band. Furthermore, power loss density and radar cross-section simulations validate that the Co/MnO@NC ternary composites possess exceptional microwave signal attenuation abilities, with a maximum radar cross-section reduction value of up to 27.98 dBm2 at 0°. Such outstanding absorption properties exceed those of most currently reported ternary composites and exhibit significant potential to replace conventional ferromagnetic-based absorbers. This work offers a straightforward strategy to fabricate ternary composites with excellent electromagnetic wave attenuation properties and sheds novel insights into the dissipation mechanisms.