Abstract

Abstract This paper reports an increase in the ability to absorb microwaves from a composite made of combination between soft and hard magnetic materials, perovskite material, and an epoxy as matrix of composite, Ni0.5Zn0.5Fe2O4/Ba0.6Sr0.4Fe9.5Al0.5MnTiO19/FeTiO3/epoxy (NBFE) with a wt% ratio of 5:3:2:10. Composite samples were made using the mechanical alloying method with milling techniques and sintered at a temperature of 1000 oC for 5h. NBFE composites were studied to increase the ability to absorb microwaves at 2-18 GHz frequencies with thickness variations of 1 mm and 2 mm. The results obtained, the composite sample Ni0.5Zn0.5Fe2O4/Ba0.6Sr0.4Fe9.5Al0.5MnTiO19/FeTiO3/epoxy has the ability to absorb microwaves with the best reflection loss value -37.47 dB with a bandwidth almost reaches 11.32 GHz in the 2-18 GHz frequency range.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.