UV Vis Diffuse Reflectance Research Articles

Crystal structure, optical properties, Hirshfeld surface analysis and bactericidal activity of a new organic-inorganic hybrid: 4-methyl-1-(2'-nitrobenzyl)pyridinium tetrabromocuprate(II)

In this work, an organic-inorganic hybrid crystal with excellent bactericidal activity, 4-methyl-1-(2'-nitrobenzyl)pyridinium tetrabromocuprate(II) ([4Me2NO2BzPy]2[CuBr4]), was synthesized by the crystal growth by a slow evaporation method and characterized. [4Me2NO2BzPy]2[CuBr4] crystallized in the orthorhombic space group Pna21. Hirshfeld surface analysis indicated that the H···H (28.8%), H···Br/Br···H (27.0%), and O···H/H···O (17.5%) interatomic contacts played a primary role in contributing to the stacking of the crystals. Thermogravimetric analysis showed that the material was stable up to 192.5 °C. The charge transfer interaction between anions and cations was explained by UV-Vis diffuse reflectance spectroscopy. [4Me2NO2BzPy]2[CuBr4] exhibited favorable bactericidal activity against Staphylococcus aureus and Escherichia coli.

Photocatalytic activity of TiO2-Carbon nanocomposite films against Culex pipiens mosquito larvae under sunlight irradiation

Recent research has focused on developing eco-friendly nanomaterials to combat mosquito infestations. This study demonstrates the enhancement of titanium dioxide (TiO2) nanoparticles through the addition of carbon nanoparticles (C-NPs), significantly boosting their photocatalytic efficiency. This enhancement allows TiO2 to purify water and act as an effective pesticide. Formulated TiO2-carbon (TiO2–C) nanocomposite films showed increased photocatalytic activity against third-instar larvae of Culex pipiens under natural sunlight. The addition of C-NPs improved sunlight absorption and reduced electron-hole recombination rates compared to pristine TiO2 (P–TiO2), making it more effective for mosquito control. The superior performance of the TiO2–C nanocomposite was confirmed through X-ray Photoelectron Spectroscopy (XPS), UV–vis diffuse reflectance spectra (UV–vis DRS), and Photoluminescence emission (PL). These analyses confirmed successful carbon incorporation, expanding the absorption spectrum and enhancing optical properties. The UV–vis DRS spectra showed a decrease in the bandgap energy (Eg) of P–TiO2 from 3.2 eV to 3.1 eV, improving its photocatalytic effectiveness under natural sunlight. Bioactivity tests, including catalase activity, reduced glutathione (GSH) colorimetric assay, and superoxide dismutase (SOD) assay, along with microscopic and histological examinations of treated larvae, indicated that the TiO2–C nanocomposite effectively reduces the mosquito population and causes significant physiological damage and abnormalities in larval structures and midgut cells. These findings highlight the enhanced photocatalytic capabilities of the TiO2–C nanocomposite, making it a novel and effective solution for mosquito control with significant public health and environmental benefits.

SrNiO3 perovskite/CeO2 composites as heterogeneous photocatalysts for the 2-propanol oxidation in gas–solid regime

Both SrNiO3 perovskite and CeO2 are materials suitable for photocatalytic purposes. In this work, the preparation and physicochemical characterization of bare SrNiO3 and CeO2 along with composites where CeO2 was enriched with the perovskite from 15 to 70 % in mass of SrNiO3 in the composite are described. The materials have been used for the photocatalytic oxidation of 2-propanol in gas–solid regime in the presence of UV-LED or simulated solar irradiation. The solids were characterized by XRD, SEM/EDX, N2 adsorption/desorption and FTIR and UV–Vis diffuse reflectance spectroscopies. The composite containing 15 % w/w of SrNiO3 and 85 % w/w of CeO2 resulted the most active, giving rise the complete degradation of 2-propanol after 1.5 h or 6.0 h of irradiation by UV-LED and simulated solar light irradiation, respectively. Photocatalytic activity results are discussed considering the physical–chemical properties on the catalysts.

N-doped nano-casted carbon monolith for Pb (II) removal and photocatalytic degradation of thiamethoxam from aqueous solution.

Single rock-like N-doped carbon monolith (ND-PFCM) was successfully constructed via nanocasting method. Phenol formaldehyde resin was taken as carbon source and nitrogen was incorporated in monoliths through NaNH2 activation. The synthesized monoliths were used for the removal of Pb (II) from aqueous solution. Various characterization techniques, namely Brunauer-Emmett-Teller (BET), Raman spectroscopy, UV-visible diffuse reflectance spectra (DRS) UV-DRS, zeta potential, scanning electron microscopy (SEM), TEM (transmission electron microscopy), TGA (thermogravimetric analysis), and XPS (X-ray photoelectron spectroscopy), were utilized to characterize synthesized monolithic samples. The different parameters such as pH, adsorbent dosage, and time were enquired on the removal efficiency of monoliths toward Pb(II). ND-PFCM exhibited the highest adsorption capacity of 330.03mgg-1 in 180min at pH 6. This is attributed to the fact that the better texture properties and presence of nitrogen functional groups enhance the uptake of Pb (II) ions on the monolith surface. In the kinetic studies, pseudo-second-order model fitted best with the experimental data. Furthermore, the removal of thiamethoxam (TM) from aqueous solution was done by using different weight ratios of ND-PFCM under the visible light. The maximum removal efficiency of 97.35% with rate constant of 0.02085min-1was obtained in 160min. Moreover, monoliths exhibited good reusability for five consecutive cycles. The findings suggest that the synthesized monoliths exhibit characteristics suitable and eco-friendly for sustainable use in water treatment applications.

Adsorption mechanisms, kinetics and photoactivities of green synthesized hydroxyapatite supported ZnO and La–ZnO catalysts

In this study, hydroxyapatite (HAP) is synthesized by a co-precipitation method from the waste eggshell, utilized as a support for ZnO (ZnO-HAP) and La–ZnO (La–ZnO-HAP) and employed to degrade methyl orange (MO) and methylene blue (MB) dyes under UV irradiation. Water vapor adsorption as relative humidity (84 % RH) on the HAP structure and the as-prepared catalysts are also examined. The characteristic ZnO and HAP reflections are detected in X-ray diffraction (XRD) analysis of ZnO-HAP, La–ZnO-HAP and humidified samples. ZnO and La–ZnO existence is also verified by scanning electron microscopy-energy dispersive X-ray (SEM-EDX) analysis, UV–Vis diffuse reflectance (UV–Vis DRS) spectra and X-ray photoelectron spectra (XPS). ZnO and La–ZnO loading on the HAP induce the formation of mesoporous structures with high surface areas. Dark adsorption capacities and photoactivities of the as-prepared samples are explored regarding electrostatic interactions, Lewis acid-base interactions and hydrogen bonding for both MO and MB. In particular, La–ZnO-HAP 500 °C and La–ZnO-HAP 500 °C (RH) exhibit improved adsorption abilities and photoactivities. The pseudo-second order model describes the kinetic behavior of all samples under dark conditions. Unhumidified samples follow Langmuir isotherm while Freundlich isotherm better fits humidified ones. Under irradiation, the Langmuir-Hinshelwood kinetic model describes the photoactivities of all samples. The four recycling tests confirm the stabilities of HAP 100 °C, HAP 500 °C, ZnO-HAP 500 °C and La–ZnO-HAP 500 °C. This study suggests that the ZnO or La–ZnO loaded HAP catalysts prepared in the presence and absence of humid conditions are considered promising materials for environmental remediation.

Anodized commercial galvanized grids decorated with Ag nanospheres and Cu worm-like nanorods for photoelectrochemical water splitting

The current work introduces novel and low-cost AgNSs-A@CGGs and CuNRs-A@CGGs photoanodes for the photoelectrochemical (PEC) water-splitting reaction. The photoanodes were fabricated by anodizing commercial galvanized grids(A@CGGs) in the sodium carbonate solution followed by deposition of Ag or Cu through a simple electroless substitution. Surface studies showed that AgNSs-A@CGGs and CuNRs-A@CGGs photoanodes have a unique morphology including Ag nanospheres (AgNSs) and Cu worm-like nanorods (CuNRs) with huge surface area. The UV-VIS diffuse reflectance spectra (DRS) of AgNSs-A@CGGs and CuNRs-A@CGGs photoanodes displayed the lower band gap energies of 2.4 eV, and 2.83 eV respectively, which compared to 3.91 eV for the A@CGGs, showing excellent photoanodic behavior for AgNSs-A@CGGs and CuNRs-A@CGGs photoanodes. Investigations of photoelectrochemical water-splitting under visible light irradiation showed that the production amount of H2 from AgNSs-A@CGGs and CuNRs-A@CGGs photoanodes was about 18570 and 6895 μmol h−1 cm−2 respectively. Moreover, AgNSs-A@CGGs showed 15.27 and 5.0 times higher photoconversion efficiency than CGGs and A@CGGs respectively. In this study, the introduced photoanode grids are expected to be used as cheap and industrial photoanodes for PEC water-splitting and hydrogen gas production.

Influence of annealing temperature on the structure, morphology, optical property and antibacterial response of phytochemicals-assisted synthesized zinc oxide nanoparticles

Abstract Antibiotic overuse has caused a variety of bacterial pathogens to develop new resistance mechanisms. As a result, discovering an appropriate replacement for the standard antibiotics has become an immediate concern. The present work demonstrates a facile, eco-friendly and economical method for the synthesis of hexagonal wurtzite zinc oxide nanoparticles (ω-ZONPs) using the ethanolic extract of triphala. Gas chromatography–mass spectrometry analysis of the triphala extract proved the presence of certain secondary metabolites, which aids in the formation of ω-ZONPs. The influence of annealing temperature on the antibacterial action of as-synthesized ω-ZONPs was studied for three different annealing temperatures. X-ray diffraction, dynamic light scattering, field emission electron microscopy and energy dispersive X-ray spectroscopy analyses were used to examine the impact of annealing temperature on the structure, particle size and morphology of ω-ZONPs. Fourier transform infrared spectra revealed the change in intensity of the characteristic peaks in ω-ZONPs with different annealing temperatures. From UV–Visible diffuse reflectance spectroscopy, variation in the band gap of ω-ZONPs with increasing annealing temperature was detected. Kirby Bauer disc diffusion was adopted to examine the antibacterial potential of ω-ZONPs against bacterial strains such as Staphylococcus aureus, Enterococcus faecium, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa. The ω-ZONPs annealed at 200 °C inhibited the growth of three bacterial pathogens, E. coli, B. subtilis and P. aeruginosa and exhibited effective antibacterial activity in comparison with ω-ZONPs annealed at relatively high temperatures. Thus, the antibacterial potential of ω-ZONPs could be further explored as disease controlling agents and such prototypes could be made available for commercial mass production.

Photocatalytic degradation of chlorpyrifos using Fe-doped ZnO/activated carbon nanocomposite

The present research reports the synthesis of Iron-Zinc oxide nanocomposite supported on activated carbon synthesised from Schima wallichii biomass. The nanocomposite was produced using a hydrothermal process and its physicochemical characterization was carried out using several analytical methods such as Transmission Electron Microscope (TEM), X-Ray Diffractometer (XRD), Fourier Transform Infra-Red (FT-IR), Photoluminescence (PL), UV–Visible Diffuse Reflectance Spectroscopy (DRS) and BET analyser. The prepared material was assessed for its degradation efficiency on chlorpyrifos (CPs) under visible light irradiation. The photocatalyst demonstrated optimal conditions achieving 98 % CPs degradation with 0.05 g catalyst dosage, 150 ppm initial concentration, 60-min of irradiation, and pH 2. Furthermore, recycling studies indicated the material's promising reusability, maintaining 62.7 % efficiency even after multiple cycles.

Polarized Raman, infrared and dielectric spectra of lead-free K0.5Na0.5NbO3 piezoelectric system: insights from ab-initio theoretical and experimental studies

The K0.5Na0.5NbO3 (KNN) system has emerged as one of the most promising lead-free piezoelectric over the years. In this work, we perform a comprehensive investigation of electronic structure, lattice dynamics and dielectric properties of room temperature phase of KNN by combining ab-initio DFT based theoretical analysis and experimental characterization. We assign the symmetry labels to KNN vibrational modes and obtain ab-initio polarized Raman spectra, Infrared reflectivity, Born-effective charge tensors, oscillator strengths etc. The KNN ceramic samples are prepared using conventional solid-state method and Raman and UV–Vis diffuse reflectance spectra are obtained. The computed Raman spectrum is found to agree well with the experimental spectrum. In particular, the results suggest that the mode in range ∼840–870 cm−1 reported in the experimental studies is longitudinal optical with A1 symmetry. The Raman mode intensities are calculated for different light polarization set-ups that suggests the observation of different symmetry modes in different polarization set-ups. The electronic structure of KNN is investigated and optical absorption spectrum is obtained. Further, the performances of DFT semi-local, meta-GGA and hybrid exchange-correlations functionals, in the estimation of KNN band gaps are investigated. The KNN bandgap computed using GGA-1/2 and HSE06 hybrid functional schemes are found to be in excellent agreement with the experimental value. The COHP, electron localization function and Bader charge analysis is also performed to deduce the nature of chemical bonding in the KNN. Overall, our study provides several bench-mark important results on KNN that have not been reported so far.

Sol–gel synthesis of iron titanates for the photocatalytic degradation of cyanide

Iron titanate mixed metal oxides were synthesized by the sol–gel method through four different routes. The effect of (i) the solvent of iron precursor, (ii) the addition of the chelating agent to the titanium or iron solution and (iii) the molar ratio between the chelating agent and the titanium or iron precursor over the overall percentage of obtained iron titanates was evaluated. Fourier-transform infrared spectroscopy (FTIR) and UV–Vis spectroscopy (UV–Vis) performed on the reaction medium evidenced the formation of acetate complexes of titanium (IV) or iron (III) during the different routes. X-ray diffraction (XRD) patterns of the obtained materials showed the formation of ilmenite (FeTiO3), pseudorutile (Fe2Ti3O9) and pseudobrookite (Fe2TiO5) in different proportions, as well as hematite (Fe2O3), rutile [TiO2 (R)] and anatase [TiO2 (A)]. The materials with the highest content of iron titanates obtained in each route were characterized and evaluated in the photocatalytic degradation of cyanide using visible light irradiation. UV–Vis Diffuse Reflectance Spectroscopy (UV–Vis DRS) showed that the samples exhibited energy bandgap values between 2.31 and 2.90 eV, which agrees with the values reported for iron titanates and evidence the possible activation of the materials under visible light. Scanning electron microscopy (SEM) and nitrogen physisorption results showed that the synthesized materials exhibited nanometric particle size and lower surface area (36.7 ± 4.8 m2·g-1) than TiO2 Degussa P-25 (72–155 m2·g-1). The photocatalytic performance of the synthesized materials toward oxidation of CN− exceeded by 56% the activity of pure TiO2. The content of iron titanates in the synthesized materials was found to be the variable with the greatest influence on the photodegradation of cyanide. In addition, an inversely proportional relationship between the pseudorutile content of the materials and their photocatalytic activity was observed.

Solvothermal preparation of CuO/g-C3N4 and photocatalytic degradation of ciprofloxacin

Composite materials CuO/g-C3N4 (CuOCN) were prepared using a solvothermal method to investigate their degradation effect on ciprofloxacin (CIP). The materials were characterized through X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), UV-visible diffuse reflectance spectrophotometry (DRS), and X-ray photoelectron spectroscopy (XPS). The toxicity of degradation products of CIP was assessed through antibacterial experiments, and the degradation mechanism of CIP was investigated using quenching agent capture and high-performance liquid chromatography-mass spectrometry (HPLC-MS). The results of XRD and FTIR indicate that the CuOCN composite has been successfully synthesized. The photocatalytic experiment shows that adding 15% (w/w) of Cu3(BTC)2(H2O)3 in melamine (CuOCN2) has a relatively good degradation effect on CIP and can be reused multiple times. The TEM results indicate that both CuO and g-C3N4 have a layered structure and are attached together. HRTEM analysis reveals that the two components in CuOCN2 are arranged in a layered structure, with CuO displaying two crystal planes. Energy Dispersive Spectrometer (EDS) analysis reveals that the proportion of CuO in the three composite materials is 7.86% (w/w), 15.93% (w/w), and 84.83% (w/w), respectively. DRS detection reveals that the greater the amount of CuO added, the broader the visible light absorption range of the composite material, and the narrower the bandgap width. The photocurrent and photoresistance indicate that CuOCN2 exhibits a good photoelectric effect. XPS analysis shows that the CuOCN2 composite material possesses both the chemical composition and structure of CuO and g-C3N4. During the catalytic degradation process of CIP, four active substances, h+, e−, ·O2 −, and ·OH, were produced, leading to a reduction in the toxicity of the degradation products. Through HPLC-MS analysis, it was found that CIP undergoes reactions such as defluorination, ring opening of piperazine, and quinolone during degradation, resulting in reduced toxicity. This study provides an experimental basis for the degradation of CIP by CuOCN2.

A stable and regenerative TiO2/Bi2MoO6 photocatalyst for highly effective degradation of Rhodamine B and Congo Red

ABSTRACT This research unravels a facile method for synthesising TiO2/Bi2MoO6 photocatalysts and their effective applications in degrading industrial dyes. Initially, Bi2MoO6 was prepared as the substrate, followed by the addition of TiO2 to form the TiO2/Bi2MoO6 composite. The photocatalyst was characterised by powder X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectrometry (SEM-EDS), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HR-TEM), photoluminescence (PL), and UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS). Its photocatalytic properties were evaluated by dye degradation under various conditions, including different dopant loading amounts, the reaction time, the initial concentration of the dye, and pH values. The results indicated that 50 mg of 15% TiO2/Bi2MoO6 achieved the highest photodegradation efficiency: 98.51% for 50 mL 10 mg L−1 Rhodamine B (RhB) within 100 min in a neutral buffer solution and 90.71% for 50 mL 10 mg L−1 Congo Red (CR) within 80 min in an aqueous solution. This material exerted effectiveness across a wide pH range, with removal rates of RhB exceeding 95.41% in both acidic and alkaline conditions. The degradation process conformed to the pseudo-first-order kinetic model. Radical trapping experiments revealed that the dye degradation mechanism involved ∙ O 2 − and h+. Notably, the synthesised TiO2/Bi2MoO6 photocatalyst demonstrated high stability and reusability, maintaining performance even after four degradation cycles. The TiO2/Bi2MoO6 photocatalyst, with TiO2 as the dopant and Bi2MoO6 as the substrate, demonstrated significant versatility and potential for practical dye degradation applications.

Photocatalytic activity of Nb2O5-α-Fe2O3 Nanocomposites Synthesized by Sol-gel Method

In this investigation, Nb2O5-α-Fe2O3 nanocomposites were synthesized by modified sol-gel method. The obtained materials were characterized by different techniques such as powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller (BET), UV-vis diffuse reflectance (UV-vis spectroscopy). The catalyst was found to have a particle size in the region of 20-42 nm with a high surface area. The effects of the catalyst dose, the pH value, UV power, addition of H2O2 and scavenger on the photocatalytic efficiency were investigated. This study presents a strategy to eliminate highly toxic and persistent dyes such as DB 199 dye. It was observed that the nanocomposites showed maximum response with more than 80% degradation of DB 199 dye in 100 min.

Enhanced photocatalytic removal of Cr(VI) and Rhodamine B from water using plant-mediated CdS nanoparticles: Mechanistic insights and environmental applications

Photocatalytic remediation using semiconductor nanoparticles presents a promising approach for water purification. In this study, cadmium sulfide (CdS) nanoparticles were synthesized via a plant-mediated approach and evaluated for their efficacy in removing Cr(VI) and Rhodamine B contaminants from aqueous solutions under visible light irradiation. The CdS nanoparticles were characterized by X-ray diffraction (XRD), which confirmed the presence of the cubic phase with a crystallite size of 10 nm. UV–visible diffuse reflectance spectroscopy (DRS) indicated bandgap energy of 2.4 eV, facilitating visible light absorption. Photoluminescence (PL) spectroscopy revealed reduced recombination rates of photogenerated charge carriers, enhancing photocatalytic efficiency. The synthesized CdS nanoparticles demonstrated efficient removal of both Cr(VI) and Rhodamine B, achieving degradation efficiencies of 92 % and 95 %, respectively, within 120 min under optimized conditions. Mechanistic insights suggest the generation of reactive oxygen species (ROS) and electron-hole pairs (e-/h+) contributing to pollutant degradation. This study underscores the potential of plant-mediated CdS nanoparticles as effective photocatalysts for environmental remediation applications.

Synthesis of visible-light-driven heterojunction graphitic carbon nitride (g-C3N4/Feo/TiP) material: An efficient photocatalytic agent for degradation of rhodamine 6G from wastewater

In this study, a novel and cost-effective photocatalytic material based on graphitic carbon nitride (g-C3N4) heterojunctions incorporating zero-valent iron (Feo) and titanium phosphate (TiP) was successfully synthesized via chemical reduction method. Various characterization techniques including UV–visible Diffuse Reflectance Spectroscopy, Fourier Transform Infrared Spectroscopy, X-Ray diffraction, Scanning Electron Microscopy, and Energy Dispersive Spectrum were employed to analyze the ternary photocatalyst g-C3N4/Feo/TiP. The study focused on investigating the degradation mechanism of Rhodamine 6G (Rh6G) in aqueous solution under visible light irradiation using synthesized g-C3N4/Feo/TiP heterojunction material. Remarkably, optimal photocatalytic activity was achieved at pH 3, wherein 98 % degradation of 50 mL of Rh6G (10 ppm) was attained within 60 min under visible light irradiation. This activity was consistent across a wide pH range from 3 to 11. This happens due to the exceptional enhancement of hydroxyl radicals, higher photocurrent response and photo-excited holes via Z-scheme of heterojucntion mechanism from g-C3N4/Feo/TiP material compared to g-C3N4 (60 %), TiP (75 %), and Feo/TiP (85 %) against Rh6G. The extraordinary degradation arises due to more visible light absorption capability and enhanced separation of photo-excited electrons and holes through Z-scheme heterojucntion mechanism. This report show the promising clean environmental application prospect of synthesized heterojucntion photocatalyst against organic pollutants from wastewater.

Preparation and performance of g-C3N4/g-C3N5 homojunction photocatalyst activated peroxymonosulfate for ceftriaxone sodium degradation

As the overuse of antibiotics increasingly contaminates the environment, one of modern chemistry's objectives is to identify high-performance photocatalytic materials to degrade antibiotics. This study initially utilized NH4Cl as a gas template to synthesize porous lamellar g-C3N4 (CNS) through a high-temperature calcination process. Building upon this, a homojunction catalyst, CNS/g-C3N5 (S-CN), was developed via a secondary sintering technique using different amount of 3-amino-1,2,4-triazole addition to evaluate its efficacy in activating peroxymonosulfate (PMS) for degrading the antibiotic ceftriaxone sodium. Under neutral conditions, the photocatalytic system composed of S-CN catalysts prepared by 50 mg of 3-amino-1,2,4-triazole addition and PMS (S3-CN/PMS) exhibited degradation rates that were 3.37 and 8.11 times higher than those of the CNS/PMS and g-C3N5/PMS, respectively. At a pH of 8, the S3-CN/PMS system attained a 99.7 % degradation efficiency within 75 min. Based on results from UV–visible diffuse reflectance spectroscopy (DRS), transient photocurrent response, electrochemical impedance spectroscopy (EIS), photoluminescence spectroscopy and radical scavenging experiments, this high efficiency is attributed to a homojunction Z-type charge transfer mechanism that enhances the separation of photogenerated carriers. Furthermore, the study found that the optimal PMS addition was 20 mg and the optimal pH was 8. Chloride ions promoted the reaction, while other ions decreased the reaction rate. In conclusion, this paper provides valuable insights for the morphological modification of carbon nitride homojunction materials and the efficient activation of PMS for pollutant degradation.

Effective sunlight photodegradation of methylene blue dye using zinc oxide doped with mono- and bi-metals of Ag and Ce

Nanosized spherical particles of pure ZnO and their doped ZnO photocatalysts with mono- or bi- Ag and Ce-metal oxides at different weight portions (i.e., 2 and 4 wt%) through the sol-gel route followed by a calcination at 500 °C for 2 h were employed for exploring the photodegradation of methylene blue (MB) dye under direct sunlight. The produced photocatalysts were characterized by X-ray diffraction (XRD), Brunauer, Emmett and Teller (BET) surface area, scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), fourier transform infrared (FTIR), and UV-Vis diffuse reflectance spectroscopy (DRS). XRD patterns confirmed the formation of hexagonal wurtzite polycrystalline structure of ZnO with good crystallinity. Bi-doped ZnO photocatalysts with smaller particle sizes showed efficient improving in the photocatalytic activity of ZnO under direct sunlight irradiation. The enhanced photodegradation performance of doped samples could be attributed to the reduction in the crystallite size and band gap, as well as the presence of excess oxygen vacancies and Zn interstitial sites in the nanoparticles obtained. The calculated band gap of pure ZnO decreased from 3.07 to 2.79 eV for 2 %Ag-4 %Ce/ZnO. This doped sample degraded the MB dye completely at 60 min, whereas pure ZnO exhibited 100 % degradation of MB at 180 min. Moreover, 2 % Ag-4 %Ce/ZnO photocatalyst has the highest kinetic rate of photodegradation as compared to other samples over two initial concentrations of MB dye (0.09667 min−1 at Co= 10 mg/L and 0.04433 min−1 at Co= 20 mg/L). Hence, the obtained 2 % Ag-4 % Ce doped ZnO showcased the superb breakdown of MB dye under sunlight irradiation for positioning it as a promising material for water remediation.

Performance of V–Fe based catalysts on the oxidation of dibenzothiophenes

To obtain fossil fuels with ultra-low S levels at friendly conditions, different V oxides formulations on alumina modified with Fe were characterized and selected to oxidize dibenzothiophene (DBT), 4-methyl DBT and 4,6-dimethyl DBT prevailing in diesel fuel. V–Fe based catalysts (5 or 10 wt% of V) were obtained by impregnation of ammonium metavanadate solutions on Fe-modified alumina, obtained by impregnation of Mohr salt on pseudoboehmite (2 wt% of Fe). The catalysts were calcined in air atmosphere, and after were partially reduced with H2 flux to obtain a mix of several oxidation states of V and Fe species, to evaluate the interaction of Fe in VOx/Al2O3 catalysts and determine its effect on the oxidation processes. The structural and optical properties, as well as surface species, were determined by SEM-EDS, TPR, XRD, Raman, ATR-FTIR, photoluminescence, UV–Vis diffuse reflectance, and XPS spectroscopy. The catalytic performance was evaluated in oxidative desulfurization (ODS) and photocatalytic ODS (PODS) processes. The experimental results showed the addition of Fe promoted the catalytic activity of both ODS and PODS reactions. ODS activities of V–Fe catalysts increase up to 7.5 times with respect to V catalysts without Fe, and the most active catalyst (V5Fer) presents a characteristic oxidation time of 50 min for 4,6-DMDBT. The PODS activity of V10Fec was like ODS activity, showing it is possible to oxidize the dibenzothiophenes under friendly conditions to obtain lower S levels. The promoting effect of Fe was due to the interaction of Fe2+ and Fe3+ with the catalytic support, favoring the distribution of surface V3+ and V4+ species. Additionally, Fe improved the optical properties of the catalysts since the bandgap energy decrease and low recombination rate of the electron-hole pair were observed. Therefore, V–Fe based catalysts are photocatalytically actives to be used in PODS processes.

Photocatalytic activity of Ho3+-Yb3+ activated BiVO4 upconverting phosphors

The BiVO4:Ho3+-Yb3+ upconverting phosphors have been synthesized by using the chemical co-precipitation method and optimized with 0.7 % Ho3+ + 6 % Yb3+ combination through frequency upconversion emission study. The synthesized phosphors have been characterized through XRD (X-Ray diffraction), FESEM (Field emission scanning electron microscopy), HR-TEM (High resolution- Transmission electron microscopy), UV–vis diffuse reflectance spectroscopy (DRS), Raman, and FT-IR (Fourier transform infrared spectroscopy). The XPS (X-ray photoelectron spectroscopy) analysis has been performed to study the elemental composition, chemical, and electronic states of the atoms present in the optimized sample. The specific surface area of the pure and optimized phosphors has been determined through BET (Brunauer-Emmett-Teller) analysis. From the XRD analysis, it is clear that on doping, the crystal structure of BiVO4 changes from monoclinic to tetragonal structure. The values of rate constants for the photocatalytic performance of the upconverting codoped and pure BiVO4 phosphors under the illumination with an artificial solar lamp for degradation of MB dye are found to be 0.00498 min−1 and 0.00269 min−1, respectively. To verify these results, the same experiment has also been performed under the visible LED (Light-emitting diode) light illumination. This enhancement of ∼ 85 % in the rate constant of the photocatalytic performance ensured the utilization of the NIR portion of the light by the codoped BiVO4 phosphors through the frequency upconversion process. The material’s recycling photocatalysis experiment for three cycles has been performed to check its reusability. The upconversion emission and XRD analysis of the materials after photocatalysis have been performed. From this study, it is confirmed that the stability of the sample is better even after three cycles of photocatalytic dye degradation experiment.

Enhancing photocatalytic dye degradation efficiency through the utilization of shock wave effects on neodymium oxide (Nd2O3)

This article delves into the impact of shockwaves on neodymium oxide (Nd2O3) nanoparticles, aiming to evaluate their physical and chemical stability. Nd2O3 nanoparticles were subjected to varying sets of shock pulses (100, 200, and 300) in photocatalytic dye degradation. The nanoparticles crystallinity and unit cell volume after shockwave exposure were examined using powder X-ray diffraction (PXRD) analysis with unit-cell software. PXRD data revealed no alterations in the crystalline structure, lattice parameter and unit cell volume. Comparisons between pre- and post-shockwave field emission scanning electron microscopy (FE-SEM) portraying data demonstrate that repeated shockwave application causes a decrease in particle size. Raman spectroscopy, under ambient conditions, shows a high intensity after shock conditions intensity will decrease. Furthermore, FTIR spectroscopy revealed the characteristic strong and broad absorption band associated with metal-oxygen (Nd-O) groups in the Nd2O3 nanoparticles. UV–Vis diffuse reflectance spectroscopy (DRS) was used to investigate the bandgap of the Nd2O3 nanoparticles. Initially, the bandgap was measured at 5.96 eV under ambient conditions, but following the shockwave exposure, it was decreased to approximately 5.91 eV. Interestingly, the surface area of the shockwave-treated Nd2O3 nanoparticles is increased and exhibited an increased efficiency in photocatalytic dye degradation. This finding holds promising implications for environmental remediation applications.