UV Vis Diffuse Reflectance Research Articles

Visible Light Induced Photocatalytic Degradation of Diclofenac in Aqueous Solution Using Fabricated ZnO/g-C3N4 by Facile Calcination Technique.

The ability of the heterojunction between two distinct semiconductors with appropriately matched band gaps to improve the separation of photogenerated electron-hole pairs has been demonstrated to enhance photocatalytic activity. Hence, ZnO/g-C3N4 composites have been fabricated by the facile deposition and calcination of ZnO and g-C3N4. X-ray photoelectron spectroscopy, powder X-ray diffraction, and Fourier transform infrared spectroscopy confirm the formation of the composite. Scanning electron microscope, transmission electron microscope, and energy-dispersive X-ray spectroscopy morphological analysis reveal that ZnO was homogeneously spread over the g-C3N4 surface. UV-vis diffuse reflectance spectroscopy analysis shows the slightly enhanced visible light absorption ability of the composite. Photoluminescence (PL) spectroscopy and electrochemical impedance spectroscopy analysis prove the higher charge separation of the composite during the irradiation of light. The composite shows admirable photocatalytic efficiency in the visible light-driven photocatalytic degradation of an aqueous diclofenac (DFC) solution. The superoxide anion radical (•O2 -) and hydroxyl radical (•OH) act as reactive species during the degradation reaction. Probable reaction mechanisms have been proposed.

Facile one-pot synthesis of photoresponsive Cu1.8S and CuInS2 nanostructures aided by Cu-pyrimidylthiolate molecular precursor

Copper-based binary and ternary sulfides have attracted significant attention due to their excellent photo-physical properties, making them highly promising for high-performance energy harvesting and storage devices. This study focuses on the synthesis and structural characterization of an air-stable hexanuclear Cu-pyrimidylthiolate cluster complex which serves as an efficient single-source precursor for the preparation of Cu1.8S nanocrystals. Furthermore, coupling the molecular precursor with suitable indium source resulted in a facile one-pot pathway for the preparation of technologically important, copper-based ternary CuInS₂, nanocrystals. The crystal structure, phase purity, and compositions of the nanostructures were confirmed using PXRD, XPS, EDS, and area elemental mapping. Electron microscopic studies revealed the formation of polygonal and hexagonal morphology with varied size in Cu1.8S and CuInS₂ nanocrystals respectively. UV-Vis diffuse reflectance spectroscopy showed a slight blue shift in the band gap of the nanostructures compared to their bulk counterparts which can be attributed to quantum confinement or surface lattice distortion effects. The band gap of the pristine nanocrystals along with high photocurrent and stable photo-switching characteristics suggest that they can serve as suitable electrode material for optoelectronic and photodetector devices.

Highly efficient magnesium ferrite/graphene nano-heterostructure for visible-light photocatalytic applications: Experimental and first-principles DFT studies

In this research study, the electronic structure of magnesium ferrite/graphene (MFO/Gr) nano-heterostructure for photocatalytic application was studied. The MFO nanoparticles with a median size of 85 nm were composited with Gr sheets using a photo-assisted reduction process. The XRD and SAED results, respectively, showed the spinal crystalline structure of MFO and the hexagonal structure of Gr in MFO/Gr nanocomposite. The XPS results revealed that the orbitals of MFO and Gr atoms interacted with each other, implying a Van der Waals heterojunction nanocomposite. The optical characteristics using UV–Vis diffuse reflectance spectrophotometry (UV–Vis DRS) and photoluminescence (PL) spectra demonstrated a lowering of MFO band gap from 2.05 to 1.84 eV by incorporation of Gr. Furthermore, the photoelectrocatalytic and photocatalytic dye degradation examinations showed a substantial impact of Gr on the photocatalytic activity of MFO nanoparticles: a 28-fold increase in the photocurrent and an 8-fold increase in the dye-degradation rate. The density functional theory (DFT) studies on MFO/Gr heterojunction revealed a considerable hybridization between Gr atoms orbitals (2p orbitals) and MFO atoms orbitals (Mg 3 s and Fe 3d orbitals) in the conduction band, which facilitate the transfer of photo-excited electrons from MFO to Gr. Also, the charge density difference at the MFO/Gr interface led to a polarized field at the interface, which is desirable for hindering photogenerated electron-hole recombination in the MFO/Gr nanocomposite. Along with the experimental results, the DFT results also revealed that the MFO/Gr nano-heterostructure is an excellent candidate for photocatalytic applications such as water splitting using sunlight to produce green hydrogen fuel.

The synthesis, structures and characterizations of (C5H12NO)4Cd3Cl10·2H2O and (C5H12NO)2BiCl6·H5O2 crystals

Two new organic-inorganic hybrid crystals (C5H12NO)4Cd3Cl10·2H2O and (C5H12NO)2BiCl6·H5O2 were synthesized by solution method, and their basic physical properties, including structures, thermal stability analysis, UV–Vis diffuse reflectance absorption spectra and photoluminescent characteristic were characterized. The two crystals both crystallize in same monoclinic crystal system, but different P21/c and C2/c space group for (C5H12NO)4Cd3Cl10·2H2O and (C5H12NO)2BiCl6·H5O2, respectively. Their infrared, Raman and mass spectrometry were measured, with related characteristic peaks were identified. The Raman peaks at 249 and 88 cm−1 are ascribed to Cd-Cl stretching vibration and Cl-Cd-Cl deformation vibration, respectively. The mass spectra analysis confirm the existence of C5H12NO+ cation, [CdCl]+ and Na-(C5H12NO)2BiCl6·H4O2. A phase transition peak that respectively located at 378 and 403 K for (C5H12NO)4Cd3Cl10·2H2O and (C5H12NO)2BiCl6·H5O2 was detected by the synchronous thermal analysis, which is related with the loss of crystalline water in their structures. In addition, the maximum absorption peak at 230 and 240 nm, with corresponding band gap of 3.35 and 3.15 eV were fitted for (C5H12NO)4Cd3Cl10·2H2O and (C5H12NO)2BiCl6·H5O2, respectively. Furthermore, (C5H12NO)4Cd3Cl10·2H2O features a bluish white emission with the peak centering at 496 nm when it was excited at 380 nm by a Xenon lamp. This work extends the catalog of organic-inorganic hybrid metal halides and presents the potential application of (C5H12NO)4Cd3Cl10·2H2O in optical field.

Physical and enhanced photocatalytic MO dye degradation behaviour of Zn doped β-Ga2O3 microrods

This work explored the effects of Zn doping on the structural, micrographic, optical and photocatalytic behaviour of gallium oxide (β-Ga2O3) microrods. The X-ray diffractogram (XRD) and Raman spectral analyses confirmed the monoclinic structure of β-Ga2O3, with a shift to lower angles in the XRD pattern indicating Zn incorporation into the Ga2O3 lattice. The Scanning electron microscopy (SEM) images revealed a rod-like shape, with the diameter decreasing from 604 nm to 573 nm with Zn doping. Further analysis using TEM, HR-TEM, SAED, EDX, and elemental mapping confirmed the shape, crystallinity, crystal structure, and elemental distribution. The interplanar spacings were measured as 0.4 and 0.2 nm, corresponding to the (002) and (−311) planes of β-Ga2O3. UV–Vis diffuse reflectance spectroscopy (UV–Vis DRS) showed a slight shift in the absorption edge, while photoluminescence (PL) analysis demonstrated strong UV and weak visible light emission. Photocatalytic results revealed a high efficiency of dye degradation,(i.e) 98 % (20 ppm) and 89 % (30 ppm) against methyl orange (MO) dye aqueous solution over 150 min, with a rate constant of 0.02/min and 0.01/min, respectively for 1.5 wt% Zn doping. This suggests that the Zn-doped material holds promise as a photocatalyst for wastewater treatment applications.

Down-conversion luminescence and thermometric properties of novel orange-red Bi2Mo3O12:Pr3+ phosphors

Bi2Mo3O12: Pr3+ phosphors have been successfully synthesized through a one-step solid-state reaction method. The effects of Pr3+ concentration on lattice constants and optical properties were also studied. XRD patterns showed well-crystallized monoclinic structures for the prepared Bi2Mo3O12 and Bi2Mo3O12: Pr3+ samples. The UV–visible diffuse reflectance spectra indicated strong absorption in the ultraviolet region. Excitation spectra demonstrated that the Bi2Mo3O12: Pr3+ could be efficiently excited under UV light in the 250–430 nm range and blue light at 450 nm. By varying the excitation wavelength, the emission color could be tuned from orange-red to red region. The strongest emission peak is located at around 597 nm, which is attributed to the 1D2→3H4 transition of Pr3+. An optical thermometer based on fluorescence intensity ratio (FIR) shows a high sensitivity of Sr = 2.02 % K−1, indicating the developed materials have potential applications in the optical temperature sensing field.

“Investigating impact of Ni-Cd substitution on structural magnetic and optical properties of nanosize Al ferrites”

Ferrites are among the most extensively studied materials, specifically due to their amazing and diverse characteristics. Therefore, we synthesized NixCd1-xAlyFe2-yO4 (NCAF) ferrites using a microwave auto-combustion process, with x varying from 0.0 to 1.0 and y set at 0.1. We conducted a meticulous characterization of their structural, surface morphological, magnetic, molecular vibrational and optical properties. X-ray diffraction confirms the lattice parameter and a single-phase spinel structure. Rietveld refined XRD patterns identified the Fd-3m space group cubic spinel phase. HR-TEM examination shows pseudo-spherical particles with an average size of 40–45 nm. Surface topography exhibits tiny, spherical microstructures. The lognormal histogram showed an average particle size of 56.6 nm–124.8 nm, decreasing with nickel concentration. At a nickel concentration (x) of 0.6, saturation magnetization (Ms) increases and then decreases at 1.0. FTIR confirms no organic phase and spinel development. Absorption measurements determined the band gap energy, which Tauc plot revealed to be 2.5870–2.1657 eV. We used the Kubelka-Munk function to find the band gap energy in the UV–Vis diffuse reflectance spectra (DRS), which was between 2.0027 and 1.6817 eV.

Anodic Synthesis of Highly Ordered TiO2 Nanotube Arrays: Role of Electrolyte Composition on the Structural, Morphological, Optical, and Photo-electrochemical Properties

The fluoride species present in two different anodizing electrolytes were used to produce TiO2 nanotube arrays (TiO2 NTAs) by simultaneous anodic reaction and chemical dissolution. In this investigation, two different electrolytes were used for the preparation; [Eth-TiO2 NAs: 95 ml ethylene glycol+0.5% NH4F+5 ml DI water] and [Gly-TiO2 NAs: 75 ml glycerine+0.5% NH4F+25 ml DI water]. The effects of the prepared electrolytes used in the synthesis of TiO2 nanotube arrays on structural element composition, morphology, and optical properties are the focus of this study and are characterized by X-ray diffraction (XRD), scanning electron microscopy field emission (FE-SEM), energy-dispersive X-ray spectroscopy (EDX) and UV-vis diffusion reflection spectroscopy (DRS), respectively. The photoelectrochemical properties of TiO2 NTAs prepared in different electrolytes were investigated. The photoelectrochemical performance of TiO2 NTAs in Na2SO3 (0.1 M) and Na2S (0.1) was examined under the light of 100 mW/cm2 from a xenon lamp. Comparing the photoelectrochemical (PEC) results of both electrolytes, we find that Eth-TiO2 NTAs contribute a wide surface area resulting in an enhanced PEC response. TiO2 NTs, which were prepared with Eth-TiO2 NTAs, exhibited the highest photocurrent density, 0.326 mA cm–2, and photoconversion efficiency (0.22%).

Energy trapping to substitutional and charge compensation defects in persistent luminescent BaAl2O4:Tb3+

The holistic approach of the photoluminescence (PL), thermoluminescence (TL), and persistent luminescence properties at room temperature of BaAl2O4:Tb3+ were investigated in detail using a wide range of techniques. Materials were obtained using a solution combustion synthesis. The x-ray powder diffraction patterns of nondoped and Tb3+ doped BaAl2O4 indicated the hexagonal phase, and a Tb4O7 solid solution was observed at 4 and 5 mol% Tb doped aluminate. X-ray photoelectron spectroscopy revealed that Ba occupied one site and that Tb ions occupied this site as Tb3+ as well as TbIV. PL emission in blue, green, and red was observed under an excitation at 228 nm, that originated from the interconfigurational 4f8–4f75d1 transitions of Tb3+. Time-of-flight secondary ion mass spectroscopy, UV–vis diffuse reflectance, and PL revealed the presence of a Cr3+ impurity. The 0.5 mol% Tb3+ doped BaAl2O4 exhibited a strong TL band at 354, 437 and 598 K, which were attributed to the traps formed by Tb3+ doping and subsequent O2− charge compensation. A persistent luminescence mechanism was constructed for the Tb3+ doped BaAl2O4. After the energy was stored in thermally liberated Tb3+ in the Ba2+ substitution sites and charge compensation defects, the Tb3+ was the source of the continuous luminescence.

Competent CuS QDs@Fe MIL101 heterojunction for Sunlight-driven degradation of pharmaceutical contaminants from wastewater

In this study, we introduce an advanced photocatalyst developed by integrating copper sulfide quantum dots (CuS QDs) with an iron-based metal–organic framework (MOF), specifically Fe MIL101. The resulting CuS QDs@Fe MIL101 photocatalyst is engineered to efficiently degrade meloxicam (MLX) under simulated sunlight. The heterojunctions were generated by incorporating different concentrations of CuS QDs (5 %, 10 %, 15 %, 20 %, and 50 %) into the Fe MIL101 MOF matrix using the microwave-assisted hydrothermal method. The results of the XRD and the TEM studies confirmed the formation of the heterojunctions, which maintain the structural integrity of both CuS QDs and Fe MIL101. The BET measurements indicated a decrease in surface area upon CuS QDs incorporation, attributed to porés blockage and structural modifications. UV–Vis diffuse reflectance spectroscopy (DRS) revealed a redshift in absorption edges as CuS QDs content increased, enhancing visible light absorption. Photoluminescence (PL) investigations revealed that the 15 % CuS QDs@Fe MIL101 heterojunction had an effective charge separation and low recombination rates. The zeta potential analysis revealed a negative surface charge, indicating an overall electronegative characteristic. The photocatalytic performance, assessed through the degradation of MLX, demonstrated that the 15 % CuS QDs@Fe MIL101 heterojunction achieved the maximum degradation efficiency, reaching 96 % after 45 min of irradiation at a dosage of 0.1 g/L. This exceptional performance is attributed to potent charge separation, improving visible light absorption, high surface area and adsorption capacity. Various scavengers were used to investigate the roles of different reactive species, revealing holes as the predominant active species in the photocatalytic degradation process. These results highlight the potential of 15 % CuS QDs@Fe MIL101 heterojunctions as efficient photocatalyst for environmental remediation from pharmaceutical pollutants under simulated sunlight. These findings highlight the potential for application of CuS QDs@Fe MIL101 in real-world wastewater treatment systems, particularly in addressing pharmaceutical contaminants like meloxicam in industrial effluents.

Vibrational, optical, electronic and electrocatalytic properties of SrCuSi4O10 ceramic

This research reports the synthesis of powdered SrCuSi4O10 ceramic powder, obtained through a solid-state chemical reaction methodology. The sample was characterized using X-ray powder diffraction (XRPD), Raman and Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), reflectance (R), electron paramagnetic resonance spectrum (EPR), lattice dynamic calculations, electronic and electrocatalytic properties analyses. The X-ray analysis showed that crystalline structure of SrCuSi4O10 compound belongs to a tetragonal system with the P4/ncc space group, containing four formulas per unit cell (Z = 4). The SEM micrographs present a morphology of layered microplates with some irregularity in size and shapes. UV–vis diffuse reflectance spectra show three intense reflection regions. Regarding the vibrational properties, the theoretical calculation was performed using a rigid ion model in order to assign the experimental Raman and IR modes. Additionally, electronic properties calculations were carried out using Density Functional Theory (DFT). Finally, the hydrogen evolution reaction (HER) performance of the SrCuSi4O10 electrocatalyst was evaluated.

Photodegradation of Polyethersulfone (PES), Polyvinylidene Fluoride (PVDF) and Polymethyl Methacrylate (PMMA) Microplastics via a Metal Organic Framework Namely ZIF-8/ZnO/C

The aim of this study was to photodegrade the Polyethersulfone (PES), Polyvinylidene fluoride (PVDF) and Polymethyl methacrylate (PMMA) microplastics using Zeolitic imidazolate framework-8/Zinc oxide/Carbon (ZIF-8/ZnO/C) nanocomposite generated under laboratory conditions. The produced nanocomposite was analysed using X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Photo Spectroscopy (XPS), Scanning Electron Microscope (SEM), Diffuse reflectance UV-vis spectra (DRS) and Electron Spin Resonance (ESR) analyses. The maximum PES, PVDF and PPMA photodegradation yields were 99%, 98%, and 96%, respectively, at 1 mg/l ZIF-8/ZnO/C nanocomposites (NCs) concentration, 1000 mg/l microplastics concentration, at pH = 10.0, at a temperature and photodegradation time of 40°C and 20 min, under oxic conditions at a sunlight intensity of 80 W/m<sup>2</sup> and a photon yield of 16. The XRD analysis showed the generation of ZIF-8/ZnO/C, while the FTIR analysis indicated the ZnO, C, and ZIF-8.

Enhanced band gap energy of one-pot mechano-synthesized Ag3PO4 for Orange G photodegradation under visible light irradiation: An in-depth experimental and DFT studies

The present study highlights the efficiency of Ag3PO4 photocatalyst with a band gap of 2.25 eV, synthesized by a green and one-pot simple mechanochemical method, towards photodegradation of orange G under visible irradiation. The phase structure, morphology, and optical properties of mechano-synthesized Ag3PO4 were investigated using X-ray diffraction, Scanning Electron Microscopy, Thermogravimetric Analysis, Fourier Transform Infrared, the Brunauer-Emmet-Teller surface area, and UV–vis diffuse reflectance spectroscopy. DFT calculations were also conducted for band gap energy prediction. The photocatalytic activity of the sample was evaluated using a central composite design for surface response methodology (CCD-RSM) to determine the optimal conditions for Orange G (OG) removal. The photocatalytic activity of Ag3PO4 was approximately 93 % within 20 min of reaction under irradiation for 24.6 mg/L and 11 mg/L of Ag3PO4 and Orange G, respectively. Trapping experiments confirmed that peroxides and hydroxyl radicals are the dominant active species in the photodegradation process.

Nanoarchitectonics with Fe-doping on the optical and electrocatalytic properties of ZnO prepared by the malonate coprecipitation route: Application in the hydrogen evolution reaction

Producing green hydrogen through water electrolysis in alkaline media using a suitable, eco-friendly, and inexpensive electrocatalyst is an effective approach to address the current energy problem. Transition metal oxides like ZnO are promising alternatives to noble metal-based electrocatalysts. However, their electrocatalytic properties are less reported due to their low performance. Doping is a proven strategy to enhance the functional properties of metal oxides, and the effectiveness of doping strongly depends on the synthesis route. In this work, Fe-doped ZnO (FexZn(1-x)O, x = 0, 0.06, 0.07, 0.11) was successfully synthesized via the pyrolysis of Fe-doped Zn malonate precursors obtained by the coprecipitation method. Results from a set of instrumental techniques revealed that the main phase formed is ZnO nanoparticles, with iron substituting zinc in the structure. UV–Visible diffuse reflectance results demonstrated that the optical band gap gradually decreases from 3.09 eV to 2.52 eV upon increases of iron content. The optimal amount of iron in ZnO exhibited an overpotential of 448 mV at 10 mA cm−2 (lower than that of pure ZnO and Fe2O3) and a small Tafel slope of 70 mV dec−1. The observed enhancement in electrocatalytic performance can be attributed to the generation of more active sites due to the optimal amount of iron in the matrix of the ZnO parent structure.

Solar driven highly efficient photocatalyst based on Dy2O3 nanorods deposited on reduced graphene oxide nanocomposite for methylene blue dye degradation.

In recent years, the demand for rare earth elements has surged due to their unique characteristics and diverse applications. This investigation focuses on utilizing the rare earth element dysprosium oxide (Dy2O3) for the photocatalytic oxidation of model pollutants under solar light irradiation. A novel RGO-Dy2O3 nanocomposite photocatalyst was developed using a solvothermal approach, Dy2O3 nanorods uniformly deposited onto reduced graphene oxide (RGO) nanosheets. Comprehensive characterization techniques, including Brunner-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FTIR), Raman spectroscopy, high resolution - transmittance electron microscopy (HR-TEM), field emission-electron scanning microscopy (FE-SEM), atomic force microscopy (AFM), electron paramagnetic resonance spectroscopy (EPR), photoluminescence spectroscopy (PL), and electrochemical impedance spectroscopy EIS techniques. The UV-visible diffusive reflectance spectroscopy (UV-Vis-DRS) studies revealed a band gap energy of 3.18eV and a specific surface area of 114 m2/g for the fabricated RGO-Dy2O3 nanocomposite. The RGO-Dy2O3 nanocomposite demonstrated a high photocatalytic degradation efficiency of 98.1% at neutral pH for methylene blue (MB) dye for the dye concentration of 10ppm. The remarkable photocatalytic performance was achieved within 60min under solar light irradiation. Reusability tests demonstrated stability, maintaining over 90% photocatalytic efficiency after three cycles. The EPR spectra and quenching experiments confirmed that photogenerated hydroxyl radicals significantly influence the photodegradation processes. The RGO-Dy2O3 nanocomposite photocatalyst, with its green, easy preparation process and recycling capabilities, presents an ideal choice for various applications. It offers a viable alternative for the photocatalytic degradation of organic dyes in real wastewater, contributing to sustainable environmental remediation.

Synthesis and characterization of zinc-doped hematite nanoparticles for photocatalytic applications and their electronic structure studies by density functional theory

Hematite nanoparticles doped with 1, 3 and 5 % Zn (all % are in molar) were prepared using mechanical alloying. Morphological and phase structure studies using scanning electron microscopy and X-ray diffraction showed nanoparticles possessing a semi-spherical shape and particle size of <50 nm crystallized in rhombohedral structure. The lattice parameters of hematite increased upon Zn doping. The energy-dispersive X-ray and Fourier-transform infrared results demonstrated that Zn was successfully incorporated. The optical behavior of nanoparticles was examined by UV–Vis diffuse reflectance spectroscopy and revealed that Zn doping increased the absorption intensity in the visible light region and decreased the band gap from 1.95 (hematite) to 1.83 eV (3 % Zn). Methylene blue dye degradation by the 3 % Zn sample proved doubling of the photocatalytic activity due to electronic structure modification upon Zn doping. First principles studies using density functional theory performed to investigate the effect of Zn on the electronic band structure of hematite showed that Zn doping caused band gap reduction, causing formation of new energy states, mainly above the valence band. Eventually, the enhancement of Urbach energy and reduction of effective mass, respectively accountable for increasing the relaxation time and mobility of charge carriers, were considered the two main mechanisms regarding the increased photocatalytic behavior of hematite by Zn doping.

Compositing of rGO to TiO2 by Low-Temperature Treatment and Their Photocatalytic Properties

Reduced graphene oxide (rGO)/TiO2 nanocomposites were prepared by low-temperature and low-pressure heat treatment. The structure and photocatalysis performance of the composites were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and UV-visible diffuse reflectance spectrum (UV-Vis DRS). The photocatalytic degradation performance of methyl orange (MO) by composites with different raw material ratios was studied under simulated solar-irradiation conditions. Results indicated that graphene oxide (GO) was reduced to graphene during heat treatment and bonded well with TiO2. Compared with TiO2, GO addition greatly improved its photocatalytic efficiency. Under simulated sunlight irradiation, the samples exhibited good photocatalysis performance. Within 50[Formula: see text]min, MO can be rapidly degraded by TiO2/40% rGO composite.

Visible Light-driven Effective Photocatalytic Degradation of the Persistent Organic Pollutant Using Cobalt-doped Strontium Titanate

Residual antibiotics in natural aquatic environments pose a critical threat to humans and other organisms. However, most sewage treatment plants fail to remove them. Photocatalytic nanomaterials can efficiently destroy these persistent organic pollutants in wastewater. In this study, we developed a series of cobalt-doped SrTiO3 (Co-STO) catalysts with different doping amounts (3, 5, 7, and 9 wt%) for the effective photocatalytic degradation of ciprofloxacin (CIP). The nanostructures were characterized using X-ray diffraction, field-emission scanning electron microscopy with energy dispersive X-ray analysis, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-visible diffuse reflectance spectroscopy, and Brunauer–Emmett–Teller N2 adsorption isotherms. The Co-STO particles have a mesoporous diameter of ~30.8 nm, and the Co-doped nanostructures have a rhombohedral hopper-like shape. Co-doping decreased the bandgap of pure STO from 3.61 to 3.42 eV, which enabled it to absorb visible light. Among the catalysts, 7 wt% Co-STO showed the highest CIP degradation activity (90.6%) during 120 min of visible-light irradiation. Radical scavenging experiments revealed that superoxide (O2 •-) is the primary reactive species during degradation. These Co-doped nanostructures have potential applications in the remediation of hazardous pollutants in pharmaceutical wastewater. Moreover, the crystal and energy band structure, density of states, and Bader charge of these molecules were analyzed.

Photocatalytic reduction of nitroarene derivatives by impressive visible-light active Co3O4-QDs/Mn3O4 nanocomposite

A visible light active Co3O4-quantum dots (QDs)/Mn3O4 nanocomposite was successfully synthesized by a straightforward precipitation approach. Notably, the formation of Mn3O4 nanosheets in composite structure was evidenced by different physicochemical techniques especially transmission electron microscopy (TEM), energy dispersive X-ray (EDX) and N2 sorption analyses, which indicated the uniform distribution of Co3O4-QDs with small size of around 5 nm on the surface of Mn3O4 nanosheets along with the enhancement of specific surface area for final composite. Also, the persistence of Co3O4-QDs during nanocomposite synthesis was analyzed by X-ray diffraction (XRD), FT-IR and TEM techniques. The diffuse reflectance UV–Vis and electrochemical impedance spectroscopies revealed the reduction of band gap energy and enhanced charge separation efficiency for Co3O4-QDs/Mn3O4 nanocomposite, respectively, which consequently led to improved photocatalytic response in comparison with bare Co3O4-QDs and Mn3O4 nanosheets. The as-prepared nanocomposite exhibited excellent photocatalytic activity in the reduction of a wide range of substituted nitroarenes with the yields of higher than 80 % relative to the corresponding arylamines, using N2H4·H2O as the hydrogen source and ethanol as green solvent at 25 °C and ambient pressure under visible light illumination. The synergistic effect could improve the production of active hydrogen atoms, therefore, the reasons for this transformation over the prepared nanocomposite under benign conditions are fully discussed. Furthermore, the nanocomposite could be easily recycled without decay in photocatalytic activity for at least five successive cycles.

Ag QDs modified BiOCl/UiO-66-NH2 Z-scheme heterojunction for accelerated visible light-driven photocatalytic degradation of ciprofloxacin

Ag quantum dots (QDs) anchored on the surface of BiOCl/UiO-66-NH2 Z-scheme heterojunctions were synthesized and characterized by various techniques such as X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectra (UV–vis DRS), electrochemical impedance spectroscopy (EIS), and photoluminescence (PL). The effects of Ag QDs loading, pH values and co-existing anions on the photocatalytic performance were comprehensively analyzed. The results concluded that the Ag QDs modified catalysts exhibited excellent photocatalytic performance for the degradation of ciprofloxacin (CIP), especially, the catalyst with 5 % Ag QDs loading (referred to as ABU-5) achieved a degradation efficiency of 72 % within 120 min and the apparent reaction rate constant was 0.00538 min−1. The outstanding performance of the ABU-5 catalyst is attributed to the introduction of Ag QDs as electron transfer bridges, improving visible light absorption and enhancing charge transfer between BiOCl and UiO-66-NH2. Free radical trapping experiments and leaching tests were carried out to determine the contribution rates of reactive species to the degradation efficiency and the concentration of Ag+ in solution after the reaction. The possible degradation pathways of CIP by ABU-5 were investigated by gas chromatography-mass spectrometry (GC-MS).