Ultraviolet-visible Absorption Spectroscopy Research Articles

High quantum yield nitrogen doped carbon dots for Ag+ sensing and bioimaging

N-doped carbon dots (NCDs) with green fluorescence is developed by the hydrothermal reaction with o-aminophenol and ethylenediamine as carbon and nitrogen sources, and the quantum yield (QY) is 38.4%. The NCDs are characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), Ultraviolet-visible absorption spectroscopy (UV–vis) and fluorescence spectroscopy. The results show that NCDs have good fluorescence properties and stability, and the NCDs are further utilized as a sensor for Ag+ via the static quenching effect (SQE) (λex=430 nm, λem=510 nm). The linear range of Ag+ is 30–210 µmol/L with a limit of detection (LOD) of 4.7 µmol/L (S/N = 3). On this basis, we quantitatively detect Ag+ in real samples. Furthermore, due to the excellent fluorescence performance, the NCDs are found to be an effective tool for Ag+ sensing in bioimaging.

Nitrogen and copper-doped saffron-based carbon dots: Synthesis, characterization, and cytotoxic effects on human colorectal cancer cells

AimDoped carbon dots (CDs) have attracted tremendous attention in cancer therapy. We aimed to synthesize copper, nitrogen-doped carbon dots (Cu, N-CDs) from saffron and investigated their effects on HCT-116 and HT-29 colorectal cancer (CRC) cells. Main methodsCDs were synthesized by hydrothermal method and characterized by transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible (UV–Vis) absorption spectroscopy, and fluorescence spectroscopy. HCT-116 and HT-29 cells were incubated with saffron, N-CDs, and Cu, N-CDs for 24 and 48 h for cell viability. Cellular uptake and intracellular reactive oxygen species (ROS) were evaluated by immunofluorescence microscopy. Oil Red O staining was used to monitor lipid accumulation. Apoptosis was evaluated using acridine orange/propidium iodide (AO/PI) staining and quantitative real-time polymerase chain reaction (Q-PCR) assay. The expression of miRNA-182 and miRNA-21 was measured by Q-PCR, while the generation of nitric oxide (NO) and lysyl oxidase (LOX) activity was calculated by colorimetric methods. Key findingsCDs were successfully prepared and characterized. Cell viability decreased in the treated cells dose- and time-dependently. HCT-116 and HT-29 cells uptook Cu, N-CDs with a high level of ROS generation. The Oil Red O staining showed lipid accumulation. Concomitant with an up-regulation of apoptotic genes (p < 0.05), AO/PI staining showed increased apoptosis in the treated cells. In comparison to control cells, NO generation, and miRNA-182 and miRNA-21 expression significantly changed in the Cu, N-CDs treated cells (p < 0.05). SignificanceThe results indicated that Cu, N-CDs could inhibit CRC cells through the induction of ROS generation and apoptosis.

Up-conversion and downconversion studies of Nd3+ doped borophosphate glasses

Neodymium doped borophosphate glasses have been synthesizsed by melt quenching technique to investigate their luminescence properties. The increase in density and decrease in molar volume with increasing concentration of Nd2O3 (0.1 mol% to 0.5 mol%) established the participation of Nd3+ in the glass structure. Non-crystalline nature of prepared glasses is confirmed by the absence of sharp peaks in X-ray diffraction spectra. The various structural units due to B2O3, P2O5, and PbO were identified by Fourier transform infrared spectroscopy. Ultraviolet visible absorption spectroscopy showed various absorption peaks/bands at 742 nm (4F7/2+4S3/2), 684 nm (4F9/2), 626 nm (2H11/2), 581 nm (4G5/2+2G7/2), 523 nm (4G7/2+4G9/2+ 2K13/2), 431 nm (2D5/2+2P1/2), 358 nm (4D3/2+4D5/2), 338 nm (2I11/2), and 315 (4D7/2+2I13/2+2L15/2). The optical parameters, namely indirect band gap, molar refractivity, molar polarizability, electronic polarizability and dielectric constant showed linear trend with increasing concentration of Nd2O3. Judd-Ofelt parameters followed Ω6> Ω4> Ω2 trend. The experimental and calculated oscillator strength for 584 nm is highest among all transitions because it is hypersensitive in nature. Upon 806 nm excitation, four visible peaks at 489 nm, 540 nm, 605 nm and 671 nm were observed. Excited state absorption up-conversion and energy transfer up-conversion mechanisms were responsible for visible up-conversion. At 338 nm, ultraviolet energy is downconverted to 448 nm, 529 nm, 591 nm. Commission International de I'Eclairage (CIE) chromaticity coordinates were evaluated from the up-conversion emission spectra and the coordinates lie in green region.

A nostoxanthin-producing bacterium, Sphingomonas nostoxanthinifaciens sp. nov., alleviates the salt stress of Arabidopsis seedlings by scavenging of reactive oxygen species.

A novel, nostoxanthin-producing, endophytic bacterium, designated as AK-PDB1-5T, was isolated from the needle-like leaves of the Korean fir (Abies koreana Wilson) collected from Mt. Halla in Jeju, South Korea. A 16S rRNA sequence comparison indicated that the closest phylogenetic neighbors were Sphingomonas crusticola MIMD3T (95.6%) and Sphingomonas jatrophae S5-249T (95.3%) of the family Sphingomonadaceae. Strain AK-PDB1-5T had a genome size of 4,298,284 bp with a 67.8% G + C content, and digital DNA-DNA hybridization and OrthoANI values with the most closely related species of only 19.5-21% and 75.1-76.8%, respectively. Cells of the strain AK-PDB1-5T were Gram-negative, short rods, oxidase- and catalase-positive. Growth occurred at pH 5.0-9.0 (optimum pH 8.0) in the absence of NaCl at 4-37°C (optimum 25-30°C). Strain AK-PDB1-5T contained C14:0 2OH, C16:0 and summed feature 8 as the major cellular fatty acids (> 10%), while sphingoglycolipid, phosphatidylethanolamine, phosphatidylglycerol, phospholipids and lipids were found to be the major polar lipids. The strain produces a yellow carotenoid pigment; natural products prediction via AntiSMASH tool found zeaxanthin biosynthesis clusters in the entire genome. Biophysical characterization by ultraviolet-visible absorption spectroscopy and ESI-MS studies confirmed the yellow pigment was nostoxanthin. In addition, strain AK-PDB1-5T was found significantly promote Arabidopsis seedling growth under salt conditions by reducing reactive oxygen species (ROS). Based on the polyphasic taxonomic analysis results, strain AK-PDB1-5T was determined to be a novel species in the genus Sphingomonas with the proposed name Sphingomonas nostoxanthinifaciens sp. nov. The type strain is AK-PDB1-5T (= KCTC 82822T = CCTCC AB 2021150T).

Biobased, Degradable, and Conjugated Poly(Azomethine)s.

Carotenoids are a class of biobased conjugated molecules that bear a resemblance to the substructure of polyacetylene, a well-known conductive but insoluble polymer. Solubility is an important physical attribute for processing materials using different techniques. To impart solubility in polymers, alkyl side chains are often included in the molecular design. While these design strategies are well explored in conjugated systems, they have not been implemented with carotenoids as a building block in polymers. Here, we show a series of carotenoid-based polymers with varying side chain lengths to tune solubility. Using carotenoid and p-phenylenediamine-based monomers, degradable and biobased poly(azomethine)s were synthesized via imine polycondensation. Maximum solubilities corresponding to the varying alkyl chain lengths were quantitatively determined by ultraviolet-visible (UV-vis) absorption spectroscopy. Since carotenoids are biobased with known degradation products, the effect of acidic and artificial sunlight-promoted degradation was systematically investigated using UV-vis spectroscopy, 1H nuclear magnetic resonance (NMR) spectroscopy, infrared (IR) spectroscopy, gel permeation chromatography (GPC), and high-resolution mass spectroscopy (HRMS). Our polymer system was found to have two modes of on-demand degradation, with acid hydrolysis accelerating the rate of polymer degradation and artificial sunlight generating additional degradation products. This work highlights carotenoid monomers as viable candidates in the design of biobased, degradable, and conjugated polymers.

Influence of a transient spark plasma discharge on producing high molecular masses of chemical products from l-cysteine

Cold atmospheric pressure plasmas are considered a forthcoming method in many research areas. Plasma modification of biomolecules has received much attention in addition to plasma-treated biomaterials. Hence, in this work, we operated a transient spark plasma (TSP) discharge to study its effect on the l-cysteine chemical structure. the TSP was configured in a pin-to-ring electrode arrangement and flowed by Ar gas. We also investigated the effect of two chemicals; dimethyl sulfoxide (DMSO) and hydrogen peroxide (H2O2) by the bubbling method to show how they can change the creation of new chemical bioproducts. Ultraviolet–Visible absorption spectroscopy, Fourier transform infrared spectroscopy and Liquid chromatography–mass spectroscopy were used to investigate any changes in chemical bonds of cysteine structure and to depict the generation of new biomolecules. Based on the displayed results plasma-generated reactive species had a great role in the chemical structure of the cysteine. Entering DMSO and H2O2 into the plasma caused the creation of new products and the heaviest biomolecule was produced by the simultaneous addition of DMSO and H2O2. The results also predicted that some chemical products and amino acids with a higher value molecular masse produced from the polymerization process of cysteine solution. The strong oxidation process is responsible for the heavy chemical compounds.

Insights into surface circulation and mixing in James Bay and Hudson Bay from dissolved organic matter optical properties

Hudson Bay and James Bay are fed by numerous rivers, which also deliver large amounts of dissolved organic matter (DOM). The objective of this study is to assess Hudson Bay wide DOM spatial distribution using ultraviolet-visible light absorption and excitation-emission matrix fluorescence spectroscopies. Overall, a five-component PARAFAC model was validated using 1060 discrete samples collected over nine field campaigns between 2009 and 2018 and including the first samples from James Bay ( n = 112). Regional and seasonal variations were observed. Particularly striking was a 9-fold difference in concentration between coastal and marine zones of these bays, which implies limited mixing between those regions. Seasonal variations in absorption coefficient at 355 nm and terrestrial humic-like components were found only in east Hudson Bay, revealing a regional disparity in seasonal DOM behaviour. The summer intensities and relative abundances of DOM revealed that cyclonic circulation transports terrestrial DOM around James Bay following its eastern shores before being transported northward along the western coast of Belcher Islands. The vertical distribution of DOM indicated that fluorescent DOM is delivered to the deeper layer by winter convective mixing in northern Hudson Bay. • Limited mixing between the coastal and marine regions of the bay is observed. • The strong terrestrial signal of east James Bay is found in northern Belcher Island. • DOM is delivered to the deeper layer by winter convection in northern Hudson Bay.

Interactions between polycyclic musks and human lactoferrin: Multi-spectroscopic methods and docking simulation.

Galaxolide (1,3,4,6,7,8-hexahydro-4,6,6,7,8-hexamethylcyclopenta-γ-2-benzopyrane; HHCB) and Tonalide (7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene; AHTN) are "pseudo-persistent" pollutants that can cause DNA damage, endocrine disruption, organ toxicity, and reproductive toxicity in humans. HHCB and AHTN are readily enriched in breast milk, so exposure of infants to HHCB and AHTN is of concern. Here, the molecular mechanisms through which HHCB and AHTN interact with human lactoferrin (HLF) are investigated using computational simulations and spectroscopic methods to identify indirectly how HHCB and AHTN may harm infants. Molecular docking and kinetic simulation studies indicated that HHCB and AHTN can interact with and alter the secondary HLF structure. The fluorescence quenching of HLF by HHCB, AHTN was static with the forming of HLF-HHCB, HLF-AHTN complex, and accompanied by non-radiative energy transfer and that 1:1 complexes form through interaction forces. Time-resolved fluorescence spectroscopy indicated that binding to small molecules does not markedly change the HLF fluorescence lifetime. Three-dimensional fluorescence spectroscopy indicated that HHCB and AHTN alter the peptide chain backbone structure of HLF. Ultraviolet-visible absorption spectroscopy, simultaneous fluorescence spectroscopy, Fourier-transform infrared spectroscopy, and circular dichroism spectroscopy indicated that HHCB and AHTN change the secondary HLF conformation. Antimicrobial activity experiments indicated that polycyclic musks decrease lactoferrin activity and interact with HLF. These results improve our understanding of the mechanisms involved in the toxicities of polycyclic musks bound to HLF at the molecular level and provide theoretical support for mother-and-child health risk assessments.

Inhibition of albendazole and 2-(2-aminophenyl)-1H-benzimidazole against tyrosinase: mechanism, structure-activity relationship, and anti-browning effect.

Tyrosinase is the key enzyme involved in enzymatic browning of plant-derived foods. Inhibition of tyrosinase activity contributes to the control of food browning. Due to safety regulations or other issues, most identified tyrosinase inhibitors are not suitable for practical use. Therefore, it is necessary to search for novel tyrosinase inhibitors. In this study, the anti-tyrosinase activity and mechanism of albendazole and 2-(2-aminophenyl)-1H-benzimidazole (2-2-A-1HB) were investigated through ultraviolet-visible absorption spectroscopy, fluorescence spectra, molecular docking, and molecular dynamic (MD) simulation. The anti-browning effect of albendazole on fresh-cut apples was then elucidated. Albendazole and 2-2-A-1HB were both efficient tyrosinase inhibitors with IC50 of 51 ± 1.5 and 128 ± 1.3 μmol L-1 , respectively. Albendazole suppressed tyrosinase non-competitively and formed tyrosinase-albendazole complex statically. Hydrogen bond and hydrophobic interaction were major driving forces in stabilizing the tyrosinase-albendazole complex. While 2-2-A-1HB inhibited the enzyme competitively and quenched its intrinsic fluorescence through a static mechanism, it generated strong binding affinity with tyrosinase through hydrophobic interaction. MD simulations further validated that albendazole/2-2-A-1HB could form stable complexes with tyrosinase and loosened its basic framework structure, leading to a change in secondary structure and conformation. In addition, albendazole could delay the browning of fresh-cut apples by inhibiting the activity of polyphenol oxidase, peroxidase and phenylalanine ammonia-lyase, and reducing the oxidation of phenolic compounds. This research might provide a deep view of tyrosinase inhibition by benzimidazole derivatives and a theoretical basis for developing albendazole as a potential fresh-keeping agent. © 2023 Society of Chemical Industry.

Green synthesis of silver nanoparticles using Eupatorium adenophorum leaf extract: characterizations, antioxidant, antibacterial and photocatalytic activities.

The green synthesis of metallic nanoparticles has tremendous impacts in various fields as found in recent years due to their low cost, easy and environmentally friendly synthesis. In this article, we report a simple and eco-friendly method for the synthesis of silver nanoparticles (AgNPs) using an aqueous Eupatorium adenophorum (E. adenophorum) leaf extract as a bioreductant. Interestingly, Fourier transform infrared (FTIR) spectroscopy analysis established that the E. adenophorum extract not only served as a bioreductant but also acted as a capping agent to stabilize the nanoparticles by functionalizing the surfaces. Various characterization techniques were adopted, such as X-ray powder diffraction (XRD), FTIR, ultraviolet-visible absorption (UV-Vis) spectroscopy, dynamic light scattering, scanning electron microscopy and energy-dispersive X-ray spectroscopy (EDX) to analyze the biosynthesized AgNPs. Biosynthesized nanoparticles were also explored for antioxidant, antibacterial and photocatalytic activities. The AgNPs showed improved free radical scavenging activity (IC50 48.96 ± 0.84µg/mL) and bacterial inhibitory effects against both gram-positive (Staphylococcus aureus; 64.5µg/mL) and gram-negative (Escherichia coli; 82.5µg/mL) bacteria. Photocatalytic investigation showed AgNPs were effective at degrading rhodamine dye (78.69% in 90min) when exposed to sunlight. These findings collectively suggest that E. adenophorum AgNPs were successfully prepared without the involvement of any hazardous chemical and it may be an effective antibacterial, antioxidant and promising agent for the removal of hazardous dye from waste water produced by industrial dyeing processes.

Fabrication of Two Luminescent Imidazolyl Cadmium-Organic Frameworks and Their Sensing Mechanism for 2,6-Dichloro-4-nitroaniline.

2,6-Dichloro-4-nitroaniline, alias dicloran (DCN), is a broad-spectrum pesticide that can cause irreversible damage to the human body. Therefore, it is of great significance to develop a technology for the rapid and convenient detection of DCN. Luminescent metal organic frameworks have attracted extensive attention in the field of sensing and detection due to their excellent optical properties. In this study, two kinds of 2D Cd-MOFs (CdMOF-1 and CdMOF-2) were developed for the detection of residual DCN in the environment. Both CdMOFs exhibit excellent solvent and acid-base stability and can respond to DCN quickly and sensitively in a short time (30 s). CdMOFs not only have good selectivity and anti-interference toward DCN but also have good reusability. Under the conditions of DCN concentrations of 1-15 and 0.3-30 μM, the change in fluorescence intensity of CdMOF-1 and CdMOF-2 showed a good linear relationship with DCN concentration (R2 = 0.999/0.991), and the detection limits were 0.36 and 0.12 μM, respectively. Through ultraviolet-visible absorption spectroscopy (UV-Vis), X-ray photoelectron spectroscopy, fluorescence lifetime, and density functional theory calculations, it is revealed that the fluorescence quenching mechanisms of DCN for two kinds of Cd-MOFs are competitive absorption and photoinduced electron transfer, and there may be a weak π-π interaction. Finally, it is demonstrated that by using two types of fluorescent CdMOFs to make the fluorescent test paper and detect actual soil, these can be applied to the actual scene and achieve onsite real-time detection.

Response of dissolved organic matter to thermal stratification and environmental indication: The case of Gangnan Reservoir

Dissolved Organic Matter (DOM), an important part of the carbon cycle in reservoir ecosystems, has a great impact on aquatic environment to recognize the conversion process of different media DOM. The distribution, spectral characteristics, and sources of DOM in Gangnan Reservoir during thermal stratification were analyzed using ultraviolet-visible absorption spectroscopy and excitation-emission matrix spectroscopy. Three humic-like components (C2, C3, and C4) and two protein-like components (C1 and C5) were identified. The proportions of the humic-like components increased with the progression of thermal stratification (C2 and C3 were dominant), whereas the protein-like components decreased in proportion, and the trend in the interstitial water was constant (C3 and C4 were dominant). The proportion of the humic-like components in the sediments was highest during the stationary period of thermal stratification (C2 and C3 were dominant). C2 and C3 were significantly correlated in the water body and interstitial water (P < 0.001), while C1 and C5 were correlated in the sediment (P < 0.05). In the water body, C2 and C3 were negatively correlated during the formative period of thermal stratification (slope = −1.85; R2 = 0.52), strongly positively correlated during the stationary period (slope = 0.76; R2 = 0.94), and positively correlated during the weakening period of thermal stratification (slope = 0.46; R2 = 0.30). With the progression of thermal stratification, the relative contribution of endogenous substances decreased gradually, whereas the humification degree increased in the water body and interstitial water. The protein-like components and key physicochemical factors (Fe, Mn, TN, TP, and CODMn) were significantly correlated during the formative period (P < 0.05), and humic-like components and key physicochemical factors (NO2−-N and TN) were significantly correlated during the stationary and weakening periods (P < 0.05). C1, C4, and C5 indicated NO3−-N during the formative period; C2 and C3 indicated NO3−-N during the stationary period; and C2 and C4 indicated NO3−-N during the weakening period in the water body. These findings enhance the understanding the mutual transformation processes of DOM in reservoir ecosystems and could guide water quality management.

Understanding non-covalent interactions of graphene oxide toward transition metal surfaces and relation of binding constants with titration end points from dynamic light scattering studies

The understanding of non-covalent binding interactions of graphene oxide toward transition metal surfaces (Fe, Co, Ni, and Cu) was observed by ultraviolet–visible absorption spectroscopy, fluorescence emission spectroscopy, hydrodynamic size, and zeta potential studies through titration experiments. These interactions mainly occur through C=C double bonds of graphene oxide. Iron and cobalt nanoparticles interact strongly as compared to nickel and copper nanoparticles. The obtained Stern–Volmer plots are curved indicating that static and dynamic quenching occur simultaneously in these systems. The curves obtained for size titration graphs indicated the saturation end point for these titrations, which were then compared with binding constants obtained from linear Stern–Volmer plots. Interestingly, with lower binding constants, a higher concentration of nanoparticles was required for titration end points. These two complimentary techniques stood well quantitatively toward each other. Upon titrating the nanoparticles with graphene oxide, the zeta potential always lowered close to the value of graphene oxide, indicating that hybrids are more stable than the nanoparticles.

Acid-Triggered Release of Eugenol and Fluoride by Desensitizing Macro- and Nanoparticles

The modern dentifrice industry needs non-toxic materials able to adhere to dentin, occlude dentinal tubules, hold pharmacons at the surface of dentin, and release them on demand to the location the tooth needs them most. Novel dental materials loaded with eugenol or fluoride-ions examined for the release of the pharmacon in an aqueous suspension efficiently adhere to the surface of human dentin and occlude dentinal tubules as evidenced by Scanning Electron Microscopy (SEM). Ultraviolet-visible (UV-vis) absorption spectroscopy and a fluoride-selective electrode quantified the release of pharmacons. The surface modification with casein stabilizes micro- and nanoparticles of calcium carbonate in aqueous suspensions, enabling their application in dentifrices. The ability of particles to hold and release eugenol depends on their morphology and composition, with the casein-coated calcium carbonate microspheres being the most acid-sensitive and most promising for dentifrice applications. The novel material releases fluoride under physiologically low pH, regardless of the presence of other ingredients of the artificial saliva, which sustains the bulk fluoride concentration comparable with most fluorinated toothpastes. Low pH-triggered release mechanisms selectively supply the drug to the areas that need it most, reducing the overall dose and ushering in a new type of targeted dentifrices.

Evaluation of Low-Cost UV-Vis Spectroscopy for Measuring Nitrate Using Synthetic Water Samples

Highlights A novel low-cost, modular spectroscopy system is compared to a standard system using synthetic samples, principal component analysis, and partial least squares regression. The information contained in the data produced by the two systems is similar according to principal component analysis. The low-cost system was able to accurately predict nitrate concentrations in concentrated and diluted samples using partial least squares regression. The methodology could be applied to water quality analysis in agriculture and water resources management. Abstract. Water quality data collection is an essential component of water systems management. For instance, the effective management of nutrients in hydroponic systems is necessary for maximizing yields efficiently and sustainably. Additionally, nutrients in natural and engineered waterbodies must be monitored to ensure they are meeting the required chemical characteristics for their ecological and social functions. However, conventional water quality data collection methods place limitations on water systems management due to their high resource requirements. Nitrate (NO3) is a major nutrient in ecological and agricultural systems, which can be reliably measured with ultraviolet-visible (UV-Vis) spectroscopy, a highly established technique for water quality analysis. The goal of this research was to evaluate a novel, low-cost, modular UV-Vis spectroscopy setup (GatorSpec) for the measurement of NO3 concentration in chemically complex solutions. UV-Vis absorbance of synthetic samples was measured using the GatorSpec and a commonly used bench-top laboratory spectroscopy system, the NanoDrop2000C. These data were analyzed using principal component analysis (PCA) to compare the spectral data produced by each system and partial least squares (PLS) regression to compare their ability to predict NO3 concentration. Results showed that data from both measurement systems were similar, indicating that the low-cost GatorSpec provided similar measurement accuracy to that of the laboratory reference system, the NanoDrop2000C. The PLS results revealed that for the diluted samples, the models derived from both systems were very good at predicting NO3 concentration. With these outcomes, it can be concluded that the GatorSpec is effective at measuring NO3 concentration in complex solutions and is comparable in performance to that of the NanoDrop2000C. In the future, this low-cost setup could be used to manage NO3 concentrations more efficiently in various applications such as hydroponic plant production, environmental monitoring, and stormwater treatment, which, in turn, could reduce the economic and environmental costs of these systems. Keywords: Low-cost, Synthetic samples, Ultraviolet-visible absorption spectroscopy, Water quality.

Synthesis of Zinc Sulfide Nanocrystals by Chemical Bath Deposition Methods

Chemical bath deposition method was used to create zinc sulfide (ZnS) nanoparticles. The CBD contained fixed components such as ZnCl2, NH4NO3, and CS (NH2)2 and KOH. Samples were heated at 90°C in a bath with magnetic agitation. Homogeneity, high transparency, adhesion, and crystalline ZnS films were achieved using KOH (1.4 M). For structural and optical investigation, the produced nanoparticles are examined using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared (FTIR) Spectroscopy, and ultraviolet-visible (UV-Vis) Absorption Spectroscopy. In XRD, the cubic crystal structure can be seen at 350nm, the UV-Vis spectrum reveals a blue peak. The absorbance and type of bonds present in samples are determined by FTIR spectra.

Ultrafast dynamics in polymeric carbon nitride thin films probed by time-resolved EUV photoemission and UV-Vis transient absorption spectroscopy.

The ground- and excited-state electronic structures of four polymeric carbon nitride (PCN) materials have been investigated using a combination of photoemission and optical absorption spectroscopy. To establish the driving forces for photocatalytic water-splitting reactions, the ground-state data was used to produce a band diagram of the PCN materials and the triethanolamine electron scavenger, commonly implemented in water-splitting devices. The ultrafast charge-carrier dynamics of the same PCN materials were also investigated using two femtosecond-time-resolved pump-probe techniques: extreme-ultraviolet (EUV) photoemission and ultraviolet-visible (UV-Vis) transient absorption spectroscopy. The complementary combination of these surface- and bulk-sensitive methods facilitated photoinduced kinetic measurements spanning the sub-picosecond to few nanosecond time range. The results show that 400 nm (3.1 eV) excitation sequentially populates a pair of short-lived transient species, which subsequently produce two different long-lived excited states on a sub-picosecond time scale. Based on the spectro-temporal characteristics of the long-lived signals, they are assigned to singlet-exciton and charge-transfer states. The associated charge-separation efficiency was inferred to be between 65% and 78% for the different studied materials. A comparison of results from differently synthesized PCNs revealed that the early-time processes do not differ qualitatively between sample batches, but that materials of more voluminous character tend to have higher charge separation efficiencies, compared to exfoliated colloidal materials. This finding was corroborated via a series of experiments that revealed an absence of any pump-fluence dependence of the initial excited-state decay kinetics and characteristic carrier-concentration effects that emerge beyond few-picosecond timescales. The initial dynamics of the photoinduced charge carriers in the PCNs are correspondingly determined to be spatially localised in the immediate vicinity of the lattice-constituting motif, while the long-time behaviour is dominated by charge-transport and recombination processes. Suppressing the latter by confining excited species within nanoscale volumes should therefore affect the usability of PCN materials in photocatalytic devices.

Fabrication and characterization of a flexible and disposable impedance-type humidity sensor based on polyaniline (PAni).

This work presents a highly sensitive, economical, flexible, and disposable humidity sensor developed with a facile fabrication process. The sensor was fabricated on cellulose paper using polyemaraldine salt, a form of polyaniline (PAni), via the drop coating method. A three-electrode configuration was employed to ensure high accuracy and precision. The PAni film was characterized using various techniques including ultraviolet-visible (UV-vis) absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The humidity sensing properties were evaluated through electrochemical impedance spectroscopy (EIS) in a controlled environment. The sensor exhibits a linear response with R 2 = 0.990 for impedance over a wide range of (0%-97%) relative humidity (RH). Further, it displayed consistent responsiveness, a sensitivity of 1.1701 Ω/%RH, acceptable response (≤220 s)/recovery (≤150 s), excellent repeatability, low hysteresis (≤2.1%) and long-term stability at room temperature. The temperature dependence of the sensing material was also studied. Due to its unique features, cellulose paper was found to be an effective alternative to conventional sensor substrates according to several factors including compatibility with the PAni layer, flexibility and low cost. These unique characteristics make this sensor a promising option for use in specific healthcare monitoring, research activities, and industrial settings as a flexible and disposable humidity measurement tool.

The inhibitory effects of platinum(II) complexes on amyloid aggregation: a theoretical and experimental approach.

Platinum (Pt)(II) square planar complexes are well-known anticancer drugs whose Mechanism of Action (MOA) are finely tuned by the polar, hydrophobic and aromatic features of the ligands. In the attempt to translate this tunability to the identification of potential neurodrugs, herein, four Pt(II) complexes were investigated in their ability to modulate the self-aggregation processes of two amyloidogenic models: Sup35p7-13 and NPM1264-277 peptides. In particular, phenanthriplatin revealed the most efficient agent in the modulation of amyloid aggregation: through several biophysical assays, as Thioflavin T (ThT), electrospray ionization mass spectrometry (ESI-MS) and ultraviolet-visible (UV-vis) absorption spectroscopy, this complex revealed able to markedly suppress aggregation and to disassemble small soluble aggregates. This effect was due to a direct coordination of phenanthriplatin to the amyloid, with the loss of several ligands and different stoichiometries, by the formation of π-π and π-cation interactions as indicated from molecular dynamic simulations. Presented data support a growing and recent approach concerning the repurposing of metallodrugs as potential novel neurotherapeutics.

Determination of the antagonistic efficacy of silver nanoparticles against two major strains of Mycobacterium tuberculosis

Tuberculosis (TB) is considered one of the most prominent diseases across the globe. This present study aims to inspect the impact of silver nanoparticles (AgNP) against Mycobacterium tuberculosis, which is the causative vector of TB. The efficacy of the AgNP was conducted based on the minimum inhibitory concentration (MIC) of the AgNPs through microplate Alamar blue assay. The preparation of the AgNPs involved chemical synthesis. The state and the size of the AgNPs were determined and confirmed by using ultraviolet-visible (UV-Vis) absorption spectroscopy, X-ray diffraction (XRD) spectroscopy, and Transmission electron microscopy (TEM). This study evaluated two strains: Mycobacterium tuberculosis H37Rv and Mycobacterium bovis. In addition, another multiple drug-resistant Mycobacterium tuberculosis strain was also considered in this study, along with the clinically obtained isolates from Mycobacterium tuberculosis H37Rv and Mycobacterium tuberculosis bovis. The synthesized nanoparticles were found to be tetrahedral in shape with an average particle size of 45±3 nanometre (nm). The obtained results indicated that the proliferation of all the strains (two reference strains and one MDR strain) was resisted by the action of the synthesized AgNPs. The MIC of the MDR strain was noted within the range of 2-12 µg/ml, whereas the MIC for the Mycobacterium tuberculosis H37Rv and Mycobacterium bovis was noted in the range of 2-14 and 3-30 µg/ml, respectively. Accordingly, this study proposed a novel approach to combat tuberculosis, which is considered a global threat to humankind, indicating the present study's novelty.