Types Of Microplastics Research Articles

Effect of different microplastics on the mobilization of soil inorganic phosphorus by exomycorrhizal fungi

<p>Microplastics (MPs) can affect the phosphorus (P) cycle in soil by changing soil properties and the function of microbial communities, but their impact on soil P availability remains unclear. To explore the effects of different types of MPs on the mobilization of soil inorganic P by exomycorrhizal fungi, Lactarius delicious (Ld) was used as the test strain, and polystyrene microspheres (PS), polypropylene (PP) and poly(lactic acid) (PLA) were used as test materials. The soil was used as the only P source for the media. The effect of different types of MPs on the mobilization of soil inorganic P by exomycorrhizal fungi was studied using liquid culture method. The results showed that exposure to MPs at low to medium concentrations (10 or 100 mg L-1) activated inorganic P in soil by stimulating the secretion of additional organic acids and hydrogen ions by ectomycorrhizal fungi, improving the available P in soil. The effect of mobilizing inorganic P was more significant in the treatment groups exposed to low and medium concentrations of biodegradable PLA. This may be related to the fact that PLA stimulated the ectomycorrhizal fungi to secrete more organic acids, and the release of a large amount of lactic acid after PLA was biodegraded. However, when the exposure concentration of MPs further increased, the growth of ectomycorrhizal fungal mycelium may be inhibited, the secretion of organic acids and hydrogen ions may be reduced, and the mobilization ability of soil inorganic P may be limited. In addition, it should be noted that high concentrations of non biodegradable MPs (PS and PP) had significant limiting effects on the mobilization of soil inorganic P by exomycorrhizal fungi. Therefore, our study results provide evidence that the presence of MPs may reduce the availability of soil P. Further research should focus on maintaining or improving P availability in plant-microbe systems in MP-polluted soil.</p>

Nonbiodegradable microplastic types determine the diversity and structure of soil microbial communities: A meta-analysis

As an emerging contaminant, microplastics (MPs) have received considerable attention for their potential threat to the soil environment. However, the response of soil bacterial and fungal communities to MPs exposure remains unclear. In this study, we conducted a global meta-analysis of 95 publications and 2317 observations to assess the effects of nonbiodegradable MP properties and exposure conditions on soil microbial biomass, alpha and beta diversity, and community structure. Our results indicate that MPs increased (p < 0.05) soil active microbial biomass by 42%, with the effect varying with MPs type, exposure concentration, exposure time and soil pH. MPs concentration was identified as the most important factor controlling the response of soil microbial biomass to MPs. MPs addition decreased (p < 0.05) the soil bacterial Shannon and Chao1 indices by 2% and 3%, respectively, but had limited effects (p > 0.05) on soil fungal Shannon and Chao1 indices. The type of MPs and exposure time determined the effects of MPs on bacterial Shannon and Chao1 indices, while the type of MPs and soil pH controlled the response ratios of fungal Shannon and Chao1 indices to MPs. Specifically, soil organic carbon (SOC) was the major factor regulating the response ratio of bacterial alpha diversity index to MPs. The presence of MPs did not affect soil bacterial community structure and beta diversity. Our results highlight that MPs reduced bacterial diversity and richness but increased the soil active microbial biomass, suggesting that MPs could disrupt biogeochemical cycles by promoting the growth of specific microorganisms.

The interaction mechanisms of algal organic matter (AOM) and various types and aging degrees of microplastics

Algal blooms can produce substantial amounts of algal organic matter (AOM). Microplastics (MPs) in aquatic environments inevitably interact with AOM. Meanwhile, the aging and type of MPs may increase the uncertainty surrounding interaction. This study focused on polyethylene (PE) and polylactic acid (PLA) to investigate their interaction with AOM before and after aging. The results shw that PLA has a stronger adsorption capacity for AOM than PE. Meanwhile, aging enhanced and weakened the adsorption of PE and PLA for AOM. Compared to unaged PE (UPE) and aged PLA (APLA), aged PE (APE) and unaged PLA (UPLA) more significantly promote the humification of AOM and alter its functional groups. 2D-IR-COS analysis reveals that the sequence of functional group changes in AOM interacting with MPs is influenced by the type and aging of MPs. After interacting with AOM, surface roughness increased for all MPs. FTIR and XPS analyses show that the addition of AOM accelerated the oxidation of MPs surfaces, especially for UPE and APLA, with oxygen content increasing by 9.32 % and 1 %. Aging enhances the interaction between PE and AOM, while weakening the interaction between PLA and AOM. These findings provide new insights into understanding the interplay between AOM and MPs.

Co-occurrence of microplastics and heavy metals in a freshwater lake system in Indian Himalaya: Distribution and influencing factors

Microplastic (MP) contamination in freshwater systems is a prevalent and persistent environmental issue, yet their occurrence and distribution remain poorly constrained. The present study examines the MPs abundance in sediment and water samples and factors controlling their distribution in the Manasbal Lake, north-western (NW) Himalaya. Additionally, the study investigates the relationship between heavy metals and the distribution of MPs in sediment, as well as their potential interactions. The MPs counts in lake surface sediment and water samples varied from 840 nkg−1 to 4020 nkg−1 and 13 nL−1 to 89 nL−1, respectively. The MPs distribution in Manasbal Lake exhibited spatial heterogeneity, with the greatest abundance observed in the eastern and northeastern areas near lake inlets. Grain size and land use appear to collectively modulate the variability of MPs in Manasbal Lake sediments. Five main MPs types were identified: beads/pellets, fragments, fibres, foams, and films, with beads being the predominant type. Polypropylene, polyethylene, and polystyrene are the dominant constituents of the observed MPs, with domestic sewage suggested as the predominant source for their abundance in the lake. Furthermore, the contamination factor for heavy metals indicated a high level of lead contamination in surface sediments, while copper and cobalt showed moderate contamination near the lake inlet. The SEM-EDS analysis illustrated the presence of toxic elements such as Hg, Zn, Pb, Cr, Cd, Ni, and Cu to the surface of MPs. This study expands the baseline characterization of MPs in freshwater systems and enhances our understanding of the potential sources and factors influencing MP distribution.

Microplastic dilemma: Assessing the unexpected trade-offs between biodegradable and non-biodegradable forms on plant health, cadmium uptake, and sediment microbial ecology

Despite extensive substitution of biodegradable plastics (BPs) for conventional plastics (CPs), research on their environmental ecological consequences as microplastics (MPs) is scarce. This study aimed to fill this gap by investigating the impacts of six prototypical MPs (categorized into BMPs and CMPs) on plant growth, cadmium (Cd) translocation, and bacterial communities in contaminated sediments. Results showed both BMPs and CMPs hindered plant development; yet interestingly, BMPs provoked more pronounced physiological and biochemical changes alongside increased oxidative stress due to reactive oxygen species accumulation. Notably, most MP types promoted the absorption of Cd by plant roots potentially via a “dilution effect”. BMPs also induced larger shifts in soil microbial metabolic functions compared to CMPs. Ramlibacter was identified as a key biomarker distinguishing BMPs from CMPs, with link to multiple N metabolic pathways and N assimilation. This study offers novel insights into intricate biochemical mechanisms and environmental chemistry behaviors underpinning MP-Cd interactions within the plant-microbe-sediment system, emphasizing BMPs’ higher potential ecological risks based on their significant effects on plant health and microbial ecology. This work contributes to enhancing the comprehensive understanding of their ecological implications and potential threats to environmental security.

Microplastics in heavy metal-contaminated soil drives bacterial community and metabolic changes

Microplastic (MP) and heavy metal pollution in soil are global issues. When MPs invade the soil, they combine with heavy metals and adversely affect soil organisms. Six common MPs—polyethylene, polypropylene, polystyrene, polyvinyl chloride, polyethylene terephthalate, and polytetrafluoroethylene—were selected for this study to examine the effects of various concentrations and MP types on the physicochemical properties, bacterial community, and soil metabolism of heavy metal-contaminated soil. MP enhanced predation and competition among heavy metal-contaminated soil bacteria. Heavy metal-MPs alter metabolites in lipid metabolism, other pathways, and the bacterial community. MP treatment promotes energy production and oxidative stress of soil bacteria to resist the toxicity of heavy metals and degrade MP pollution. In conclusion, MP treatment changed the metabolism of the microbiome in heavy metal-contaminated soil and increased the abundance of Proteobacteria that responded to MPs and heavy metal pollution by 11.54 % on average. This study explored bacteria for the ecological regeneration and provided ideas for MPs and heavy metal-contaminated soil remediation.

Investigating the Impact of Microplastics Type of Polyethylene, Polypropylene, and Polystyrene on Seed Germination and Early Growth of Rice Plants

ABSTRACTMicroplastics (MPs), which are emerging pollutants in terrestrial ecosystems, could potentially impact plant growth. One of the least explored aspects of crop development is seed germination, a crucial stage in the plant's lifecycle. This study conducted soil cultivation trials to investigate the effects of 1% (w/w) concentrations of polyethylene (PET), polypropylene (PP), and polystyrene (PS) MPs on rice growth over a 15‐day period. Parameters such as fresh weight, shoot height, root length, chlorophyll levels, and MPs identification in the roots were observed. The findings revealed the accumulation of 6–9 MP items in the roots. PET MPs inhibited root elongation (15%–20%), reduced shoot height (15%–30%), and decreased rice fresh weight (12%–37%). MPs PET, PP, and PS contamination reduced the content of chlorophyll a (15%–43%), b (21%–41%), and total (11%–40%) in rice leaves. This study enhances our understanding of the ecotoxicological effects of these three types of MPs on rice. The utilization of this data will further inform our understanding of MPs' behavior in soil vegetation and provide valuable insights into their land‐based impacts.

Remote Mountainous Area Inevitably Becomes Temporal Sink for Microplastics Driven by Atmospheric Transport.

Atmospheric transport drives the widespread distribution of microplastic (MP) in various ecosystems, posing a growing potential threat to environmental safety and human health. Understanding the source and fate of atmospheric MPs is thus crucial to constrain MP's widespread exposure. However, the source-sink dynamics of atmospheric MPs, especially in remote areas, are uncertain, and their transport routes have yet to be identified. Here, we conducted a 13-month monitoring of the atmospheric MPs in the uninhabited area of Mount Taibai, estimated the potential risk of MP exposure to the environment, and modeled the MP trajectory to analyze their transportation. We first found that as many as 15 polymer types of MPs, whose shapes mainly include fiber, fragments, films, and granules, maintained abundance (0.7 and 0.3 particle/m3 for PM10 and PM2.5, respectively) in the mountain atmosphere at respirable sizes. It is worth noting that the risk assessment results that comprehensively consider the influences of abundance and morphological characteristics suggest that the exposure level of MPs exhibits a risk even in this remote mountainous area that is not disturbed by frequent human activities. Backward trajectories revealed the likely source of MPs in the sparsely populated Liupan Mountains and Qinling Mountains of short-range transport. Further, polymer characteristics of MPs and airflow-based source analysis indicated the emission source of MPs in southern Xianyang in a longer-range transport. MPs were directionally transported to Mount Taibai through atmospheric transport under the premise of stable climate and geographical conditions. These suggest that MPs inevitably occur in remote mountainous areas driven by atmospheric transport, and the mountainous areas are persistently bearing the environmental impact of MP exposure. This study reveals the risk impacts of MP exposure and the transport dynamics of atmospheric MPs in a mountain ecosystem.

Adsorption–desorption and leaching behavior of benzovindiflupyr in different soil types

Benzovindiflupyr is a succinate dehydrogenase inhibitor fungicide that targets mitochondrial function for disease control. In this study, we investigated the adsorption–desorption and leaching behavior of benzovindiflupyr in eight soil types using the batch equilibrium method and the soil column leaching method. A Freundlich model (r2 > 0.9959) was used to better characterize the adsorption-desorption process in eight soil types, with adsorption coefficients (KF-ads) ranging from 2.303 to 17.886. KF-ads was significantly and positively correlated (p < 0.05) with the organic carbon content. High temperatures and increased initial pH of aqueous solutions led to a decrease in benzovindiflupyr adsorption in the soil. The adsorption was also influenced by factors such as ionic strength, humic acid, surfactant type, microplastic type, and particle size and concentration. Moreover, benzovindiflupyr exhibited low leachability in all four soils selected, but different leaching solutions affected the risk of benzovindiflupyr migration to groundwater. Overall, this study provides insights into the adsorption characteristics of benzovindiflupyr in different soils and provides key information for environmental risk assessment.

Differential impacts of microplastics on carbon and nitrogen cycling in plant-soil systems: A meta-analysis

Microplastics (MPs) are widely present in terrestrial ecosystems. However, how MPs impact carbon (C) and nitrogen (N) cycling within plant-soil system is still poorly understood. Here, we conducted a meta-analysis utilizing 3338 paired observations from 180 publications to estimate the effects of MPs on plant growth (biomass, nitrogen content, nitrogen uptake and nitrogen use efficiency), change in soil C content (total carbon (TC), soil organic carbon (SOC), dissolved organic carbon (DOC), microbial biomass carbon (MBC)), C losses (carbon dioxide (CO2) and methane), soil N content (total nitrogen, dissolved organic nitrogen, microbial biomass nitrogen, total dissolve nitrogen, ammonium, nitrate (NO3−-N) and nitrite) and nitrogen losses (nitrous oxide, ammonia (NH3) volatilization and N leaching) comprehensively. Results showed that although MPs significantly increased CO2 emissions by 25.7 %, they also increased TC, SOC, MBC, DOC and CO2 by 53.3 %, 25.4 %, 19.6 % and 24.7 %, respectively, and thus increased soil carbon sink capacity. However, MPs significantly decreased NO3−-N and NH3 volatilization by 14.7 % and 43.3 %, respectively. Meanwhile, MPs significantly decreased plant aboveground biomass, whereas no significant changes were detected in plant belowground biomass and plant N content. The impacts of MPs on soil C, N and plant growth varied depending on MP types, sizes, concentrations, and experimental durations, in part influenced by initial soil properties. Overall, although MPs enhanced soil carbon sink capacity, they may pose a significant threat to future agricultural productivity.

PM10-bound microplastics and trace metals: A public health insight from the Korean subway and indoor environments

Inhalable airborne microplastics (MPs) presented in indoor and outdoor environments, can deeply penetrate the lungs, potentially triggering inflammation and respiratory illnesses. The present study aims to evaluate human health risks from respirable particulate matter (PM)-bound trace metals and MPs in indoor (SW- subway and IRH- indoor residential houses) and outdoor (OD) environments. This research provides an initial approach to human respiratory tract (HRT) mass depositions of PM10-bound total MPs and nine specific MP types to predict potential human health threats from inhalation exposure. Results indicate that PM-bound trace metals and MPs were around 4 times higher in SW microenvironments compared to OD locations. In IRH, cancer risk (CR) levels were estimated 9 and 4 times higher for PM10 and PM2.5, respectively. Additionally, MP particle depositions per gram of lung cell weight were highest in IRH (23.77), followed by OD and SW. Whereas, lifetime alveoli depositions of MPs were estimated at 13.73 MP/g, which exceeds previously reported respiratory disease fatality cases by 10 to 5 times. Prolonged exposure duration at IRH emerged as a key factor contributing to increased CR and MP lung deposition levels. This research highlights severe lung risks from inhaling PM-bound MPs and metals, offering valuable health insights.

Microplastic pollution and ecological risk assessment of a pond ecosystem.

Microplastic (MP) pollution has been observed in various ecosystems as a result of the rapid increase in plastic production over the past half-century. Nevertheless, the extent of MP pollution in different ecosystems, particularly in freshwater ecosystems, has not been well-studied, and there are limited investigations on this particular topic, specifically in Türkiye. Here, we quantify the occurrence and distribution of MPs in surface water samples collected from Topçu Pond (Türkiye) for the first time. Water samples were collected at five stations and filtered (30 L for each station) through stacked stainless steel sieves (5mm, 328µm, and 61µm mesh size) with a diameter of 30cm. The abundance, size, color, shape, and type of collected debris samples were analyzed after the wet peroxide oxidation process. MP particles were observed in all samples at an average abundance of 2.4 MPs/L. The most abundant MP size class and type were 0-999µm and fiber respectively. On the other hand, prevalent colors were black and colorless in general. According to the Raman analysis results, the identified MP derivatives were polypropylene (40%), polyamide (30%), ethylene acrylic acid (20%), and polyvinylchloride (10%). Moreover, the pollution load index (PLI) index was used to determine the pollution status. PLI values were determined as 1.91 at station S1, 1.73 at station S2, 1.31 at station S3, 1 at station S4 and 1.24 at station S5. The PLI value determined for the overall pond was 1.4. The results of this research show that MP pollution is present in Topçu Pond and contributes to the expanding literature on MP pollution in pond ecosystems.

Microplastics and their interaction with microorganisms in Bosten Lake sediment

Microplastics (MPs), discovered in oceans, lakes, and rivers, can infiltrate the food chain through ingestion by organisms, potentially posing health risks. Our research is the first to study the composition and distribution of MPs in Bosten Lake's sediment. In May, the average abundance of MPs was 0.95±0.72 particles per 10 gs, and in October, it was 0.90±0.61 particles per 10 gs. Bohu Town had the highest MP abundance, with 1.75±0.35 particles per 10 gs in spring and 2 ± 0 particles per 10 gs in autumn. In May, 53 % of the MPs were transparent, while in October, black MPs constituted 58 %. The predominant morphology was fibrous, accounting for 61 % of the total. MPs in the size range of 0.2–1 mm made up 91 % and 66 % of the total in May and October, respectively. The most common types of MPs in May were polyethylene terephthalate (PET) at 40 % and polyethylene (PE) at 26 %. In October, PET was the most prevalent at 71 %, followed by poly(ether-ether-ketone)(PEEK) at 11 %. Certain microbial taxa, such as Actinobacteriota, Pseudomonas, and Vicinamibacteraceae, associated with MP degradation or complex carbon chain breakdown, were notably enriched in sediment areas with high MP concentrations. A significant positive correlation was observed between the abundance of MPs in sediments and Actinobacteriota. Additionally, the abundance of Thiobacillus, Ca.competibacter, and other bacteria involved in soil element cycling showed a significant positive correlation with the organic matter content in the sediments. Anaerobic bacteria like Thermoanaerobacterium displayed a significant positive correlation with water depth. Our study reveals the presence, composition, and distribution of MPs in Bosten Lake's sediments, shedding light on their potential ecological impact.

Characteristics and aging of microplastics in waste activated sludge under persulfate and hydrothermal co-treatment: Impact of solid content and temperature

Activated persulfate and hydrothermal treatment (HTT) are often employed to treat waste activated sludge, which can improve the efficiency of subsequent sludge treatment and change the distribution of pollutants in the sludge. However, the impact of sludge solid content and temperature on the occurrence and aging of microplastics (MPs) during HTT remains poorly understood. This study investigated the effects of persulfate-HTT (SPS-HTT) co-treatment on the migration, occurrence, and aging of MPs in sludge with different solid contents (2% and 5% solid content). The results indicated that SPS-HTT co-treatment triggers both the disruption of sludge flocs and the melting deformation of MPs at high temperatures, leading to variations in the increasing trend of MP concentration in the solid-liquid phase at different solid contents. 5% solid content sludge showed a weak release of MPs from the solid phase. The proportion of fiber MPs first increased and then decreased with increasing temperature, while no significant changes were observed in the color and type of MPs. Higher temperature and solid content induced the melting deformation of MPs, exacerbated the aging of polypropylene MPs, and resulted in rough surfaces, higher carbonyl index, and variations in crystallinity. Moreover, the correlation between the carbonyl index and aging indicators increased with increasing solid content. The MP-derived dissolved organic matter under HTT primarily comprised soluble microbial by-products and humic acid-like substances. These findings underscore the significance of sludge solid content in affecting the migration and aging of MPs during HTT, and offer novel insights into the application of HTT to MP management in sludge treatment.

Microplastics in granular sequencing batch reactors: Effects on pollutant removal dynamics and the microbial community

This study investigated the relationship between microplastic (MP) presence and pollutant removal in granular sludge sequencing batch reactors (GSBRs). Two types of MPs, polyethylene (PE) and polyethylene terephthalate (PET), were introduced in varying concentrations to assess their effects on microbial community dynamics and rates of nitrogen, phosphorus, and organic compound removal. The study revealed type-dependent variations in the deposition of MPs within the biomass, with PET-MPs exhibiting a stronger affinity for accumulation in biomass. A 50 mg/L dose of PET-MP decreased COD removal efficiency by approximately 4 % while increasing P-PO4 removal efficiency by around 7 % compared to the control reactor. The rate of nitrogen compounds removal decreased with higher PET-MP dosages but increased with higher PE-MP dosages. An analysis of microbial activity and gene abundance highlighted the influence of MPs on the expression of the nosZ and ppk1 genes, which code enzymes responsible for nitrogen and phosphorus transformations. The study also explored shifts in microbial community structure, revealing alterations with changes in MP dose and type. This research contributes valuable insights into the complex interactions between MP, microbial communities, and pollutant removal processes in GSBR systems, with implications for the sustainable management of wastewater treatment in the presence of MP.

Microplastic pollutants in sediments from a water supply reservoir: Spatial heterogeneity in abundance, characteristics and pollution evaluation

When assessing microplastics (MPs) in freshwater ecosystems, previous studies have primarily focused on natural rivers and lakes, with limited attention to urban water source areas. Sediments, recording the steady process of MPs accumulation during a long period of time, can act as an important sink for MPs. In this study, we investigated the distribution, characteristics and pollution evaluation of MP contaminants in sediments of a water supply reservoir of Hefei City (the Dafangying Reservoir). Meanwhile, the differences of MP concentrations in sediments in rural and urban areas were also compared. Our results detected five shapes, seven colors and six polymer types of MPs in sediments of the Dafangying Reservoir. Polystyrene, polyethylene and polypropylene were the most abundance types of MPs identified. The average MPs abundance of sediments in rural areas was 83.20 ± 32.99 n/100 g dry weight (d.w.), and 182.67 ± 72.21 n/100 g (d.w.) in urban areas. The total MP concentrations were significantly higher in sediments of urban sites than that in rural sites, which can be ascribed to more complex and diverse MP sources triggered by intensive anthropogenic activity in cities. Specifically, we also demonstrated significantly higher microbead abundance in urban sites, which may result from the widespread use of microbead in personal care products. Given the complexity and diversity of MPs in urban areas, we exhibited a relatively higher abundance of MPs in the Dafangying Reservoir than that in other rural larger reservoirs. According to the index of geoaccumulation, the sedimentary MPs were assessed as moderately polluted. Our study enriches valuable data on the distribution of MPs contaminants in water supply reservoir, and provides theoretical references for MPs control and management in reservoir ecosystems.

Characteristics of microplastics in tributaries of the upper Brahmaputra River along the Himalayan foothills, India

Microplastic (MP) pollution is a global concern, yet its presence in riverine environments has received limited research attention. This study aimed to evaluate MP levels and identify their potential sources in river surface water and nearby soil samples from two rural and remote rivers near the Jaldapara National Park in the foothills of Eastern Himalaya of India. The average MP levels in water and soil samples were 0.14 ± 0.11 pieces m−3 and 633.33 ± 124.72 pieces/kg d.w. respectively. The primary types of microplastics detected were fibres, followed by fragments, and films. MP sizes in water were larger than in soil samples. Blue, black, and red MPs were most abundant. Micro-Raman analysis revealed polyethylene was the dominant polymer type, followed by nylon, and polypropylene. Comparatively, pollution levels in the study area were relatively low when compared to other rivers worldwide. Understanding the sources and characteristics of microplastics are vital in formulating effective mitigation strategies and promoting responsible waste management practices. These findings provide valuable insights for policymakers, environmentalists, and indigenous communities to implement measures that can lead to curbing of plastic use and safeguard vulnerable riverine ecosystems from adverse impacts of MP pollution.

Natural iron-containing minerals catalyze the degradation of polypropylene microplastics: a route to self-remediation learnt from the environment

Virgin and environmentally aged polypropylene (PP) micropowders (V-PP and E-PP, respectively) were used as reference microplastics (MPs) in comparative photo- and thermo-oxidative ageing experiments performed on their mixtures with a natural ferrous sand (NS) and with a metal-free silica sand (QS). The ferrous NS was found to catalyze the photo-oxidative degradation of V-PP after both UV and simulated solar light irradiation. The catalytic activity in the V-PP/NS mixture was highlighted by the comparatively higher fraction of photo-oxidized PP extracted in dichloromethane, and the higher carbonyl index of the bulk polymer extracted with boiling xylene, when compared with the V-PP/QS mixture. Similarly, NS showed a catalytic effect on the thermal degradation (at T = 60 °C) of E-PP. The results obtained indicate that, under suitable environmental conditions (in this case, an iron-containing sediment or soil matrix, combined with simulated solar irradiation), the degradation of some types of MPs could be much faster than anticipated. Given the widespread presence of iron minerals (including the magnetite and iron-rich serpentine found in NS) in both coastal and mainland soils and sediments, a higher than expected resilience of the environment to the contamination by this class of pollutants is anticipated, and possible routes to remediation of polluted natural environments by eco-compatible iron-based minerals are envisaged.Graphical abstract

Evidence of microplastic contamination in the food chain: an assessment of their presence in the gastrointestinal tract of native fish

This research study focused on the primary freshwater surface sources of Khyber Pakhtunkhwa (KP) province, Pakistan—Swat and Kabul rivers. The study aimed to assess microplastic (MP) contamination of fish in the Swat and Kabul rivers. Understanding this contamination is vital for evaluating the environmental and health risks associated with consuming contaminated fish and contributing to the ongoing conservation efforts. The study’s objective was to investigate the presence of MPs in the gastrointestinal tracts (GIT) of fish and to delineate the identified MP types. Samples of local dominant fish (Schizothorax plagiostomus [Swatay] and Racoma labiata [Chunr], Cyprinus carpio [Common Carp], and Clupisoma naziri [Sher Mayai]) were collected, and their body weight and length assessed to gauge the overall health. The GIT samples were processed, digested and filtered before microscopic examination to detect MPs. Subsequently, the identified MPs were subjected to attenuated total reflectance–Fourier transform infrared spectroscopy for characterization by analyzing their absorption bands. Results of the study showed the presence of MPs in fish samples, predominantly identified as polyethylene (PE), with polypropylene (PP) being the subsequently prevalent plastic type, which manifested fish contamination with MPs. The study revealed MP pollution in both Swat and Kabul rivers, with fish ingesting these particles. This poses potential health risks for fish and health of the ecosystem.

A First Record on Microplastic Ingestion by Tropical Estuarine Copepods of Bangladesh.

Microplastics (MPs) pollution is a profound problem around the world yet it's study on the effect on zooplankton including copepods are very limited. The study was conducted between January 2021 and January 2022 in the Lower Meghna Estuary to investigate MPs ingestion in two different family of copepod: Calanoid and Cyclopoid. A method of acid digestion along with Scanning Electron Microscope (SEM) was used to identify MPs ingested by copepods from the conducted area. However, three types of MPs namely fiber, fragment and foam were extracted from this copepod biomass. Fibers represent highest (> 50%) of the ingested MPs from both group of copepod that exceed fragments and foams in all sampling stations. The overall ingestion rate of Calanoid was found higher (0.084 ± 0.002 particles/individual) compared to the Cyclopoid group (0.077 ± 0.001 particles/individual). The results of the study have effectively illustrated that copepod, obtained from multiple sampling sites within the Lower Meghna Estuary, display a propensity to ingest MPs and subsequently endangering the food security of seafood industry.