In order to improve the robustness of the ESD of the dual-direction silicon-controlled rectifier, a low doping deep well PB structure is proposed instead of the traditional high doping P+ structure. The ESD stress of the dual-direction SCR devices with deep well structure is discharged from inside and the lattice temperature of the device is low to avoid premature burnout of the device. The deep well PB structure on the surface of the device increases the parasitic resistance of the device and improve the conduction uniformity of the device. As the main conduction path of the device is located in NBL, the PB structure does not have a large influence on the sustain voltage. It is verified in a 0.25 μm BCD process. With equivalent circuit and two-dimensional device simulation, the working mechanism is analyzed. According to the transmission line pulse test results and comparing with the data from traditional dual-direction SCR structure. The device’s fault current increases from 5.486 A to 8.13 A which is suitable for communication bus high voltage electrostatic discharge (ESD) protection.