Total Polycyclic Aromatic Hydrocarbons Research Articles

Characterization of Wildland Firefighters' Exposure to Coarse, Fine, and Ultrafine Particles; Polycyclic Aromatic Hydrocarbons; and Metal(loid)s, and Estimation of Associated Health Risks.

Firefighters' occupational activity causes cancer, and the characterization of exposure during firefighting activities remains limited. This work characterizes, for the first time, firefighters' exposure to (coarse/fine/ultrafine) particulate matter (PM) bound polycyclic aromatic hydrocarbons (PAHs) and metal(loid)s during prescribed fires, Fire 1 and Fire 2 (210 min). An impactor collected 14 PM fractions, the PM levels were determined by gravimetry, and the PM-bound PAHs and metal(loid)s were determined by chromatographic and spectroscopic methodologies, respectively. Firefighters were exposed to a total PM level of 1408.3 and 342.5 µg/m3 in Fire 1 and Fire 2, respectively; fine/ultrafine PM represented more than 90% of total PM. Total PM-bound PAHs (3260.2 ng/m3 in Fire 1; 412.1 ng/m3 in Fire 2) and metal(loid)s (660.8 ng/m3 versus 262.2 ng/m3), distributed between fine/ultrafine PM, contained 4.57-24.5% and 11.7-12.6% of (possible/probable) carcinogenic PAHs and metal(loid)s, respectively. Firefighters' exposure to PM, PAHs, and metal(loid)s were below available occupational limits. The estimated carcinogenic risks associated with the inhalation of PM-bound PAHs (3.78 × 10-9 - 1.74 × 10-6) and metal(loid)s (1.50 × 10-2 - 2.37 × 10-2) were, respectively, below and 150-237 times higher than the acceptable risk level defined by the USEPA during 210 min of firefighting activity and assuming a 40-year career as a firefighter. Additional studies need to (1) explore exposure to (coarse/fine/ultrafine) PM, (2) assess health risks, (3) identify intervention needs, and (4) support regulatory agencies recommending mitigation procedures to reduce the impact of fire effluents on firefighters.

Preliminary study for Polycyclic aromatic Hydrocarbons mobilization from contaminated marine sediment using synthetic and natural surfactants

The persistent presence of Polycyclic Aromatic Hydrocarbons (PAHs) in soils and sediments due to their chemical properties requires new methods to mobilize and make them more available for remediation purposes. In this work, the evaluation of the abilities of eight different non-ionic sugar-based and totally biodegradable surfactants, such as synthetic alkyl polyglycosides (APGs), biological sophorolipids (SLs) and biological rhamnolipids (RLs), was conducted in order to provide a preliminary guideline for the selection of the surfactant and the technical approach for PAHs extraction from the sediment. The reference sample was a marine sediment collected from Bagnoli (Naples, Italy) that was characterized to evaluate the level of PAHs contamination, which resulted equal to 3.51 g Kg−1 of total PAHs in the sediment. By using surfactants solutions with a surfactant concentration five times greater than critical micelle concentration (Cs = 5x CMC), a preliminary washing test in batch configuration was conducted, then followed by multiple consecutive washes (MCW) of the sediment to assess the solubilization of PAHs from the sediment by the action of selected surfactants. The results show an evident advantage given by the employment of each studied surfactant in mobilizing PAHs, compared to distilled water as benchmark. In detail, the synthetic alkyl polyglycosides APG2 led to a 3.4 % of total PAHs mobilization in the preliminary washing test with a maximum peak of 9.8 % for a single compound. The MCW test demonstrates that more consecutive washes can increase the amount of total PAHs removed, with a similar contribution from each wash, and that biosurfactants can be more attractive after several washes thanks to the increased capacity of PAHs mobilization. Interestingly, the high efficiency of surfactant to mobilize PAHs makes the soil washing a more attractive technology for removing PAHs from the marine sediments.

Assessing petroleum contamination in parts of the Niger Delta based on a sub-catchment delineated field assessment

The Niger Delta in Nigeria is a complex and heavily contaminated area with over 150,000 interconnected contaminated sites. This intricate issue is compounded by the region’s strong hydrological processes and high-energy environment, necessitating a science-based approach for effective contamination assessment and management. This study introduces the concept of sub-catchment contamination assessment and management, providing an overarching perspective rather than addressing each site individually. A description of the sub-catchment delineation process using the digital elevation model data from an impacted area within the Delta is provided. Additionally, the contamination status from the delineated sub-catchment is reported. Sediment, surface water and groundwater samples from the sub-catchment were analyzed for total petroleum hydrocarbons (TPH) and polycyclic aromatic hydrocarbons (PAHs), respectively. Surface sediment TPH concentrations ranged from 129 to 20,600 mg/kg, with subsurface (2-m depth) concentrations from 15.5 to 729 mg/kg. PAHs in surface and subsurface sediment reached 9.55 mg/kg and 0.46 mg/kg, respectively. Surface water exhibited TPH concentrations from 10 to 620 mg/L, while PAHs ranged from below detection limits to 1 mg/L. Groundwater TPH concentrations spanned 3 to 473 mg/L, with total PAHs varying from below detection limits to 0.28 mg/L. These elevated TPH and PAH levels indicate extensive petroleum contamination in the investigated sediment and water environment. Along with severe impacts on large areas of mangroves and wetlands, comparison of TPH and PAH concentrations with sediment and water quality criteria found 54 to 100% of stations demonstrated exceedances, suggesting adverse biological effects on aquatic and sediment biota are likely occurring.

Systematic underestimation of polycyclic aromatic hydrocarbon aqueous concentrations in rivers

Polycyclic aromatic hydrocarbons (PAHs) are a widespread group of organic contaminants whose presence in water bodies is cause of severe concern. With few exceptions, the majority of PAHs is hydrophobic, presents a high adsorption affinity, and is thus primarily transported within river systems during high-flow events together with suspended particulate matter (SPM). Evidence exists of analytical challenges related to the incomplete extraction of PAHs adsorbed to solids and thus to a potential negative bias in the chemical analysis of PAHs in bulk water samples with high SPM content. Despite this, partly due to the elevated efforts required to collect representative samples containing sufficient SPM for the separate PAH analysis in this matrix, several investigations rely on the analysis of aqueous samples. This study tests the hypothesis that surveys based exclusively on bulk water may lead to a systematic underestimation of the real contamination level and transport of PAHs in rivers. Six high-turbidity events were examined in three Austrian rivers applying time-integrated sampling and simultaneously analyzing PAHs in total bulk water, filtered water, SPM, and supernatant. Despite an unavoidable degree of uncertainty in such challenging sampling scheme, the results indicate that measurements performed with best available standard methods in bulk water samples determined in average only about 40% of the theoretically expected total PAHs concentrations derived from the analyses in SPM. Such deviation has important implications for the reliable assessment of the compliance with environmental quality standards as well as for surveys aimed to estimate riverine loads, validate emission models, and understand the transport dynamics of PAHs in rivers. Whereas the first objective, e.g., in European countries, is alternatively achieved via monitoring in biota, the latter ones require efforts directed to complement monitoring campaigns with separate sampling of SPM, with monitoring of suspended solids transport to appropriately select and interpret the results of water samples and to improve the chemical analysis of PAHs in bulk water samples with high solids content.

Desorption of Polycyclic Aromatic Hydrocarbons from Microplastics in Human Gastrointestinal Fluid Simulants-Implications for Exposure Assessment.

Microplastics have been detected in various food types, suggesting inevitable human exposure. A major fraction may originate from aerial deposition and could be contaminated by ubiquitous pollutants such as polycyclic aromatic hydrocarbons (PAHs). While data on the sorption of pollutants to microplastics are abundant, the subsequent desorption in the gastrointestinal tract (GIT) is less understood. This prompted us to systematically investigate the release of microplastics-sorbed PAHs at realistic loadings (44-95 ng/mg) utilizing a physiology-based in vitro model comprising digestion in simulated saliva, gastric, and small and large intestinal fluids. Using benzo[a]pyrene as a representative PAH, desorption from different microplastics based on low density polyethylene (LDPE), thermoplastic polyurethanes (TPUs), and polyamides (PAs) was investigated consecutively in all four GIT fluid simulants. The cumulative relative desorption (CRD) of benzo[a]pyrene was negligible in saliva simulant but increased from gastric (4 ± 1% - 15 ± 4%) to large intestinal fluid simulant (21 ± 1% - 29 ± 6%), depending on the polymer type. CRDs were comparable for ten different microplastics in the small intestinal fluid simulant, except for a polydisperse PA-6 variant (1-10 μm), which showed an exceptionally high release (51 ± 8%). Nevertheless, the estimated contribution of microplastics-sorbed PAHs to total human PAH dietary intake was very low (≤0.1%). Our study provides a systematic data set on the desorption of PAHs from microplastics in GIT fluid simulants.

Water Quality and the First-Flush Effect in Roof-Based Rainwater Harvesting, Part II: First Flush

Rainwater runoff samples from a range of roofing materials were temporally collected from 19 small-scale roof structures and two commercial buildings through simulated and actual storm events, and the concentrations of polycyclic aromatic hydrocarbons (PAHs), phosphorus flame retardants (PFLs), and pyrethroid insecticides and other water quality parameters were analyzed. In Part I of this research, the concentrations of these contaminants in roof runoff and soils receiving runoff from a range of roofing materials were evaluated. In Part II, recommendations have been developed for a first-flush exclusion to improve the quality of water harvesting for nonpotable uses. Recommendations focus on a first-flush diversion based on mass removals of total suspended solids (TSS) and PAHs linked to conductivity measurements throughout a storm event. Additionally, an upper-confidence limit (UCL) was constructed to determine the minimum diversion required to obtain 50, 75, 90, and 95% mass removal of TSS and PAH contaminants. The majority of TSS were produced during the initial 1.2 mm of runoff. Likewise, the majority of PAHs were removed during the initial 1.2 mm of runoff, except for the asphalt shingle roofs, where high PAHs were observed after 6 mm of runoff. The Texas Water Development Board (TWDB)-recommended first-flush diversion of one gallon for every 100 square feet of rooftop was not always adequate for removing 50% of TSS and PAHs from the roofs. Rainwater runoff conductivity decreased drastically between 1.2 to 2.4 mm of rainwater runoff. Diverting the first flush based on conductivity has the potential to also divert the majority of TSS and PAHs in roof runoff.

Evaluation of Alternative Sources of Proteins and Other Nutrients with Potential Applications in Fish Nutrition

The European Union’s (EU) agricultural self-sufficiency is challenged by its reliance on imported plant proteins, particularly soy from the Americas, contributing to deforestation and greenhouse gas emissions. Addressing the EU’s protein deficit, this study evaluates alternative protein sources for aquaculture, focusing on their nutritional value, elemental content, and polycyclic aromatic hydrocarbons (PAHs). Protein flours from gastropods (Helix pomatia, Arion lusitanicus, Arion vulgaris) and their hepatopancreas, along with plant-based proteins from food industry by-products (oilcakes, coffee grounds, spent brewer’s yeast), were analyzed. Results revealed that snail flour contained the highest protein content at 59.09%, significantly outperforming hepatopancreas flour at 42.26%. Plant-based proteins demonstrated substantial nutritional value, with coffee grounds flour exhibiting a remarkable protein content of 71.8% and spent brewer’s yeast flour at 57.9%. Elemental analysis indicated high levels of essential minerals such as magnesium in hepatopancreas flour (5719.10 mg/kg) and calcium in slug flour (48,640.11 mg/kg). However, cadmium levels in hepatopancreas flour (11.45 mg/kg) necessitate caution due to potential health risks. PAH concentrations were low across all samples, with the highest total PAH content observed in hepatopancreas flour at 0.0353 µg/kg, suggesting minimal risk of PAH-related toxicity. The analysis of plant-based protein sources, particularly oilcakes derived from sunflower, hemp, flax, and pumpkin seeds, revealed that these by-products not only exhibit high protein contents but present a promising avenue for enhancing the nutritional quality of feed. This study underscores the potential of utilizing gastropod and plant-based by-products as sustainable and nutritionally adequate alternatives to conventional feeds in aquaculture, contributing to the EU’s environmental sustainability goals.

Effects of Chinese “double carbon strategy” on soil polycyclic aromatic hydrocarbons pollution

Polycyclic aromatic hydrocarbons (PAHs) and carbon dioxide primarily originate from the combustion of fossil fuels and biomass. The implementation of the Chinese “double carbon strategy” is expected to impact the distribution of PAH emissions, consequently influencing the spatial distribution trend of PAHs in surface soil. Therefore, it is crucial to quantitatively evaluate the effectiveness of the Chinese “double carbon strategy” on soil PAH pollution for the purpose of “the reduction of pollution and carbon emissions”. This study utilized 15,088 individual PAH concentration data from 943 soil samples collected between 2003 and 2020 in China, in conjunction with PAH emissions at a 10 km resolution, for meta-analysis. The calculated PAH emissions in this study are in line with the global PAH emission inventory (PKU-PAH-2007), with a relative standard deviation at the provincial level of less than 25 %. Subsequently, a novel method was developed using emission density and Kow of PAHs to predict PAH concentrations in surface soil based on a least-squares regression model. Compared to other environmental models, the method established in this study significantly reduced the percent sample deviation to less than 70 %. Furthermore, energy consumption data for China were simulated based on the implementation plan of the “double carbon strategy” to project PAH emissions and soil PAH levels for the years 2030 and 2060. The predicted PAH emissions in China were estimated to decrease to 41,300 t in 2030 and 10,406.5 t in 2060 from 78,815 t in 2020. Moreover, the heavily contaminated areas of soil PAHs (i.e., total PAH concentrations in soil exceeding 1000 μg kg−1) were projected to decrease by 45 % and 82 % in 2030 and 2060, respectively, compared to levels in 2020. These findings suggest that the implementation of the “double carbon strategy” can fundamentally reduce the pollution of PAHs in surface soil of China.

Variations of source-specific risks for inhalable particles-bound PAHs during long-term air pollution controls in a Chinese megacity: Impact of gas/particle partitioning

Gas/particle (G/P) partitioning is a determining factor that drives the behavior of polycyclic aromatic hydrocarbons (PAHs) in the atmosphere. To comprehend the variations and impacts of PAHs G/P partitioning on inhalation risks from different sources, atmospheric PAHs in Chengdu were studied from January 2009 to January 2021. Chengdu's air quality demonstrated improvement, with a noticeable decline in PM10 (from 238 to 103 μg m−3), PM10-bound PAHs mass concentrations (from 0.08 to 0.01 μg m−3), as well as PAHs inhalation non-cancer (from 63.5 to 7.1) and cancer risks (from 6.2 × 10−5 to 7.7 × 10−6). Decreasing trends were also observed in the concentrations of organic carbon (OC) and the values of absorptive G/P partitioning coefficient (Kp, OM) from 2009 to 2020, indicating a slight decrease in the PM absorptive capacity. A positive matrix factorization (PMF) model utilized three distinct datasets: PMFpp (particle-phase PAHs only), PMFtot (total PAHs concentrations), and PMFpp/gas (particle-phase in parallel with gas-phase PAHs). PMFpp and PMFpp/gas provide reasonable source apportionment and source-specific risk results. However, daily variations in source contributions of PMFtot were found to be unreasonable. PMFpp/gas and PMFtot could identify a source of low molecular weight PAHs (LPAHs) related to temperature, and a significantly positive correlation between LPAHs and temperature was discovered. Gas/particle partitioning of PAHs showed a notable impact on source-specific risks associated with coal and biomass combustion (CC&BC). The findings contribute to our understanding of the variation in PAHs G/P partitioning and the PM absorptive capacity resulting from effective air pollution control in China. Additionally, they offer prerequisite information for incorporating semi-volatile organic compounds in source apportionment and source-specific risk assessment.

Polycyclic aromatic hydrocarbons in seawater after the mysterious oil spill of 2019 on the Pernambuco coast, northeast Brazil

In 2019, one of Brazil's most significant environmental disasters occurred, involving an oil spill that directly affected Pernambuco state. Contamination along the coast was evaluated by the quantification of polycyclic aromatic hydrocarbons (PAHs) in fifty seawater samples collected in the summer and winter of 2021. Analysis using fluorescence spectroscopy revealed that for all the samples, levels of dissolved/dispersed petroleum hydrocarbons (DDPHs) were higher than the regional baseline for tropical western shores of the Atlantic Ocean. GC–MS analyses quantified 17 PAHs in the samples, with highest total PAHs concentrations of 234 ng L−1 in summer and 33.3 ng L−1 in winter, which were consistent with the highest risks observed in ecotoxicity assays. The use of diagnostic ratios showed that the coast was impacted by a mixture of PAHs from petrogenic and pyrolytic sources. The results indicated the need for continuous monitoring of the regions affected by the 2019 spill.

Distribution of 35 Polycyclic Aromatic Hydrocarbons in Pine Needle Samples from Selected Locations in the Republic of Korea.

Polycyclic aromatic hydrocarbons (PAHs), dust, and wax were measured in pine needles, and PAHs were also measured in surface soil. Pearson correlation analysis was performed between the analytical values. The main compounds responsible for the increase in total PAHs were non-carcinogenic phenanthrene and fluoranthene. Therefore, the % content of carcinogenic PAHs decreased with a slope = -0.037 (r = 0.47, p < 0.01), as the total PAH concentration in pine needles increased. Correlations between individual PAHs in pine needles and surface soil were very high when only low-number ring PAHs (2R- and 3R-PAHs) were statistically analyzed and significant when only high-number ring PAHs were statistically analyzed. Low-number ring PAH mainly moves in the gas phase and diffuses into the wax layer, so it was found to be statistically significant with the wax content of pine needles. High-number ring PAHs showed a high correlation with the amount of dust in pine needles because they mainly attached to dust particles and accumulated on the surface of pine needles. The ratios of fluoranthene/pyrene and methylphenanthrene/phenanthrene for predicting the origin of atmospheric PAHs have also been proven valid for pine needles.

Occurrence and characteristics of PAHs in coastal seawater off the city of Samsun on the Black Sea coast of Turkey

Polycyclic aromatic hydrocarbons (PAHs) concentrations in seawater were monitored seasonally along the Samsun coast, Turkey, between August 2019 and May 2020 to elucidate main origin, seasonal variations, and risk pathways of PAHs. Total PAH concentrations in surface seawater ranged from 24.86 to 477.78 ng L−1 (mean 138.90, SD 62.22 ng L−1), with relatively higher levels in summer and autumn seasons. Combustion products were the major sources of PAHs. The increased PAH levels during the summer period may have resulted from the more intense industrial and agricultural activities. The highest proportion of PAHs were 3- and 2-ringed, accounting for 39.23 % and 26.50 % of ΣPAHs, respectively, and their derivatives Nap and Phe predominated in individual PAHs. While RQ values of ∑PAHs showed low ecological risk, RQMPCs of BpF and BaA in autumn and BpF in summer were at high ecological risk.

Large-scale soil application of hydrochar: Reducing its polycyclic aromatic hydrocarbon content and toxicity by heating

The beneficial roles of hydrochar in carbon sequestration and soil improvement are widely accepted. Despite few available reports regarding polycyclic aromatic hydrocarbons (PAHs) generated during preparation, their potential negative impacts on ecosystems remain a concern. A heating treatment method was employed in this study for rapidly removing PAHs and reducing the toxicity of corn stover-based hydrochar (CHC). The result showed total PAHs content (∑PAH) decreased and then sharply increased within the temperature range from 150 °C to 400 °C. The ∑PAH and related toxicity in CHC decreased by more than 80% under 200 °C heating temperature, compared with those in the untreated sample, representing the lowest microbial toxicity. Benzo(a)pyrene produced a significant influence on the ecological toxicity of the hydrochar among the 16 types of PAHs. The impact of thermal treatment on the composition, content, and toxicity of PAHs was significantly influenced by the adsorption, migration, and desorption of PAHs within hydrochar pores, as well as the disintegration and aggregation of large molecular polymers. The combination of hydrochar with carbonized waste heat and exhaust gas collection could be a promising method to efficiently and affordably reduce hydrochar ecological toxicity.

Polycyclic Aromatic Hydrocarbon (PAHs) Levels in Treated Spent Engine Oil Contaminated Soil from Automechanic Workshop Site in Wukari, Nigeria

Spent engine oil contaminated soil samples were collected and divided into three portions along with uncontaminated soil sample collected 10 meters away from the contaminated site. Two of the contaminated soil samples were treated with 0.5M NaOH and heat at 2500C respectively. All the samples were extracted with appropriate solvents using sonication, cleaned up and then analyzed with gas chromatograph coupled to flame ionization detector. The results show that total PAHs concentration of contaminated soil sample was 333.6820 mg/kg, contaminated soil sample treated with 0.5M NaOH, 104.8540 mg/kg, contaminated soil sample treated with heat at 2500C was 180.0905 mg/kg and the uncontaminated soil sample, 0.7084 mg/kg. The results showed that Wukari mechanic village is contaminated with PAHs through indiscriminate disposal of spent engine oil. Furthermore, treatment with 0.5M NaOH was a more effective means of remediation relative to treatment with heat at 250oC for two hours. The study will be an appropriate guide for the artisans following enlightenment about the possible threat that contact with PAH contaminated soils could have on their health.

Chemical and Thermal Exposure Risks in a Multi Compartment Training Structure

Providing NFPA 1403 compliant live-fire training can present thermal and chemical exposure risk to instructors and students. To reduce risk, training academies, fire departments, instructors, and standards setting technical committees need more information on how different training fuels used in common training structures can impact the environment in which firefighter training occurs. This study utilized a traditional concrete training structure with multiple compartments to characterize training environments with three different fuel package materials [i.e., low density wood fiberboard, oriented strand board (OSB), and wood pallets]. Exposure risks for a fire instructor located on either the first or second floor were characterized using measurements of heat flux, air temperature and airborne concentrations of several contaminants including known, probable, or possible carcinogens. It was hypothesized that utilizing a training fuel package with solid wood pallets would result in lower concentrations of these airborne contaminants [aldehydes, polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs)] than wood-based sheet goods containing additional resins and/or waxes. Additionally, it was hypothesized that these concentrations would be lower than in the single compartment Fire Behavior Lab presented in a companion manuscript. For all measured compounds other than hydrochloric acid, airborne concentrations were 10 to 100 times lower than in the Fire Behavior Lab. OSB-fueled fires produced the highest median concentrations of total PAHs and VOCs such as benzene, while the pallet fuel package produced the lowest median concentrations of these compounds. These trends generally followed the qualitative visual obscuration created by each fuel. Additional tests were conducted on the OSB-fueled fires with increased ventilation and an alternate means of reducing visibility through smoldering smoke barrels. This OSB experiment with increased ventilation resulted in the highest temperatures in the fire room but the lowest impact on visibility throughout the structure, as well as the lowest overall concentrations of contaminants in this study. In contrast, the smoldering straw-filled smoke barrel created a highly obscured environment (with minimal impact on thermal environment) and some of the highest concentrations of the targeted contaminants of any test. These data may be useful in balancing obscuration for training with potential exposure to thermal stressors and contaminants.

Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water using the microalgae Chlorella vulgaris cultivated in mixotrophic and heterotrophic conditions

Chlorella vulgaris was cultivated for 15 days in 10 different treatments under mixotrophic and heterotrophic conditions, using wastewater from oil and poultry industries as the culture medium. The blends were made with produced water (PW), sterilized produced water (PWs), sterilized poultry wastewater (PoWs), sterilized seawater (SWs), and the addition of sodium nitrate to evaluate cell growth in treatments and the removal of PAHs. The heterotrophic condition showed more effective removal, having an initial concentration of 3.93 μg L−1 and a final concentration of 0.57 μg L−1 of total PAHs reporting 83%, during phycoremediation of (PW) than the mixotrophic condition, with an initial concentration of 3.93 μg L−1 and a final concentration of 1.96 and 43% removal for the PAHs. In the heterotrophic condition, the blend with (PWs + SWs) with an initial concentration of 0.90 μg L−1 and a final concentration of 0.32 μg L−1 had 64% removal of total PAHs compared to the mixotrophic condition with 37% removal having an initial concentration of 0.90 μg L−1 and a final concentration of 0.56 μg L−1. However, the best result in the mixotrophic condition was obtained using a blend of (PWs + PoWs) that had an initial cell concentration of 1.18 × 105 cells mL−1 and reached a final cell concentration of 4.39 × 105 cells mL−1, an initial concentration of 4.76 μg L−1 and a final concentration of 0.37 μg L−1 having a 92% total removal of PAHs. The biostimulation process increased the percentage of PAHs removal by 45% (PW) in the mixotrophic condition. This study showed that it is possible to allow an environmental remediation strategy that significantly reduces effluent toxicity and generates high value-added biomass in contaminated effluents rich in nutrients and carbon, based on a circular bioeconomy model.

Potassium peroxoborate: A sustained-released reactive oxygen carrier with enhanced PAHs contaminated soil remediation performance

Seeking for a safe, efficient, inexpensive, and eco-friendly oxidizer is always a big challenge for in-situ chemical oxidation (ISCO) technology. This study adopted the potassium peroxoborate (PPB), a novel peroxide, for soil remediation for the first time. PPB based chemical oxidation system (PPB-CO) could efficiently degrade polycyclic aromatic hydrocarbons (PAHs) without other reagents added, reaching 72.1 %, 64.2 %, and 50.0 % removal rates for naphthalene, phenanthrene, and pyrene after 24 h reaction, respectively. The superior total PAHs removal efficiency (60.6 %) was 3.6–4.7 times higher than that of other commercial peroxides (2Na2CO3•3H2O, CaO2, and H2O2). Mechanism analysis revealed that varieties of reactive oxygen species (ROS) can be generated by PPB through Fenton-like or non-Fenton routines, including H2O2, perborates species, O2•−, •OH, and 1O2. The sustainable generation of H2O2 reduced the disproportionation effect of H2O2 by 86 %, significantly improving the utilization rate. Moreover, sandbox experiments and actual contaminated soil remediation experiments verified the feasibility of PPB-CO in a real polluted site. This work provides a novel strategy for effectively soil remediation, highlighting the selection and application of new oxidants.

Appraisal of polycyclic aromatic hydrocarbons (PAHs) in indoor dust of Eastern Nigeria and its implications in the COVID-19 years

The risk assessment of PAHs in settled indoor dusts from different localities of Awka, Ekwulobia, and Rumuodomaya–Ogale, Eastern Nigeria, were investigated. Settled dust samples (n = 144) were collected from the windows and floor using brush and analyzed for PAHs with GC- FID. Dust from the windows showed higher total PAHs concentrations than the floor in the order; Rumuodomaya–Ogale > Ekwulobia > Awka. The 3- and 4-ring PAHs were dominant in the window and floor dust of Awka in all the months, while the 3-ring PAHs were the dominant compound in Ekwulobia. The concentrations of total PAH in the window and floor dusts of Ekwulobia, showed a significant difference across the months (p < 0.05). In Rumuodomaya–Ogale, the 3, 4, and 5-ring PAHs supersede in the window and floor dust. This showed that dust is a major sink for 3–5-ring PAHs. The compounds; BaA, DahA, Ant, BaP, and DBA were the major contributors to benzo(a)pyrene as toxicity equivalence (BaPTEQ) values of the window and floor dust. The total incremental life cancer risk was < 1.0 × 10−04 in all the study area; hence, the increased indoor activities during COVID-19 lockdown had no significant cancer effect on human health of the populace.

Can environmental factors increase oxidative responses in fish exposed to polycyclic aromatic hydrocarbons (PAHs)?

Relations among polycyclic aromatic hydrocarbons (PAHs), biomarkers of oxidative stress (lipid peroxidation, glutathione, and glutathione S-transferase activity), and the possible influence of environmental factors (temperature, pH, and salinity) were assessed in situ for specimens of Ramnogaster arcuata, a native estuarine fish. PAH levels found in the muscular tissue of R. arcuata ranged from 0.7 to 293.4 ng g−1 wet weight with petrogenic and pyrolytic inputs. Lipid peroxidation in the liver showed positive correlations (P < 0.05) with total PAHs (r = 0.66), 3-ring (r = 0.66) and 4-ring PAHs (r = 0.52) and glutathione in muscle (r = 0.58). Significant positive correlations (P < 0.05) were also evidenced between muscular glutathione with total (r = 0.62) and 3-ring PAHs (r = 0.75). Hepatic glutathione S-transferase negatively correlated with 4-ring PAHs (r = −0.58). These correlations suggest that lipid peroxidation and muscular glutathione could be good biomarkers for complex mixtures of PAHs, and hepatic glutathione S-transferase could be a suitable biomarker for 4-ring PAHs. Furthermore, significant correlations (P < 0.05) of environmental factors with PAH levels and biomarkers were observed, especially pH with 3-ring PAHs (r = −0.65), lipid peroxidation (r = −0.6), glutathione in the liver (r = −0.73) and muscle (r = −0.75); and temperature with 2-ring PAHs (r = −0.75) and glutathione in muscle (r = 0.51). The data suggest an influence of physicochemical parameters which could be driving a shift in PAH toxicity in R. arcuata. These results are essential for an integrated understanding of ecotoxicology and could help to predict environmental effects in present and future scenarios of ocean warming and acidification.

Formation mechanism of polycyclic aromatic hydrocarbons in grilled beef and the mitigative effect of flavonoids

AbstractPolycyclic aromatic hydrocarbons (PAHs) are found in many common foods and increase the risk of cancer in humans. This study systematically screened the components that may be related to the formation of PAHs by an excessive addition of 19 amino acids and glucose in the beef patties. Phenylalanine and glucose exhibited the potential as promoters of PAHs, while lysine, aspartic acid, glutamic acid, valine, and methionine exhibited excellent potential as inhibitors of PAHs. Subsequently, a chemical model containing phenylalanine and glucose was established to confirm their roles as precursors of PAHs. The formation mechanism of PAHs showed that naphthalene was first formed as a basic structure, and then, PAHs with more rings were further formed through substitution, addition reactions, or intramolecular cyclization reactions. The mitigative effects of four flavonoids on total PAH contents were in the order: kaempferol &gt; naringenin (better for individual PAH) &gt; myricetin &gt; quercetin (contradictory), which suggested that the antioxidant ability or radical scavenging capacity of flavonoids may be one of the pathways for PAH inhibition.