Tissue Soldering Research Articles

Enhanced wound closure in rabbit oral vestibule: a comparative analysis of suturing and laser tissue soldering

This study investigates the comparative effectiveness of laser soldering technique and conventional suturing methods for wound closure in rabbits. Over a 60-day post-operative period, scar formation and healing were monitored, with a particular focus on scar characteristics such as width, height, and overall appearance. Results indicate that the laser group exhibited improved scar characteristics, especially in the early stages (first and third days) of healing. By the seventh day, both groups demonstrated similar scar conditions, though the laser group showed a slightly faster recovery trajectory, with marginally lower scar height observed on the 21st and 60th days. While the laser technique showed some advantages in minimizing short-term complications, the long-term outcomes between the two methods were largely comparable. These findings suggest that the laser soldering method may offer some benefits over traditional suturing, particularly in the early stages of healing, but further research is needed to fully assess its clinical potential.

Impact of SWCNTs and CMCS on efficacy of anastomosis and optical properties in vivo during laser biological tissue soldering

In order to improve the mechanical properties of skin tissue incision, enhance laser absorption efficiency, further shorten healing time and reduce skin fibrosis tendency, this study investigated the effects of CMCS or SWCNT combined with 25 % BSA and 0.4 % ICG on laser tissue welding. Nd:YAG pulsed laser was used for wound closure test on live rats with an energy density of 67.3 J/cm2 and linear scanning of skin incisions. The effects of different types and concentrations of biological dressings on wound closure were tested at different sites. The results showed that biocompatible dressings containing CMCS and SWCNTs had a significant effect in promoting wound healing after laser welding. After laser welding, the tensile strength of the control group without CMCS or SWCNTs was only between 6.5 and 9.8 N/cm2, while that with CMCS reached as high as 26.5 N/cm2. Macroscopic morphology analysis showed that components such as CMCS and SWCNTs could significantly shorten healing time from 14 days to 9–10 days. Optical performance tests demonstrated that a combination of 5 %CMCS and 4 %SWCNTs can significantly increase skin's absorption coefficient for laser photons up to7-8 Lg-1cm−1 and reduce photon diffuse reflectance. HE and Masson staining revealed that when internalized by dressing containing 0.4 %SWCNTs, nanocarbon particles promoted collagen skeleton regeneration but increased fibrosis tendency after 14 days post-laser welding, resulting in unfavorable long-term healing outcomes. However, the combination of CMSC with SWCNTs can significantly improve incision mechanical properties, laser photon absorption rate, and shorten healing time while reducing scar proliferation tendencies.

Nanothermometry-Enabled Intelligent Laser Tissue Soldering.

While often life-saving, surgical resectioning of diseased tissues puts patients at risk for post-operative complications. Sutures and staples are well-accepted and routinely used to reconnect tissues, however, their mechanical mismatch with biological soft tissue and invasiveness contribute to wound healing complications, infections, and post-operative fluid leakage. In principle, laser tissue soldering offers an attractive, minimally-invasive alternative for seamless soft tissue fusion. However, despite encouraging experimental observations, including accelerated healing and lowered infection risk, critical issues related to temperature monitoring and control during soldering and associated complications have prevented their clinical exploitation to date. Here, intelligent laser tissue soldering (iSoldering) with integrated nanothermometry is introduced as a promising yet unexplored approach to overcome the critical shortcomings of laser tissue soldering. It demonstrates that adding thermoplasmonic and nanothermometry nanoparticles to proteinaceous solders enables heat confinement and non-invasive temperature monitoring and control, offering a route to high-performance, leak-tight tissue sealing even at deep tissue sites. The resulting tissue seals exhibit excellent mechanical properties and resistance to chemically-aggressive digestive fluids, including gastrointestinal juice. The iSolder can be readily cut and shaped by surgeons to optimally fit the tissue defect and can even be applied using infrared light from a medically approved light source, hence fulfilling key prerequisites for application in the operating theatre. Overall, iSoldering enables reproducible and well-controlled high-performance tissue sealing, offering new prospects for its clinical exploitation in diverse fields ranging from cardiovascular to visceral and plastic surgery.

Time-Dependent Internalization of Polymer-Coated Silica Nanoparticles in Brain Endothelial Cells and Morphological and Functional Effects on the Blood-Brain Barrier.

Nanoparticle (NP)-assisted procedures including laser tissue soldering (LTS) offer advantages compared to conventional microsuturing, especially in the brain. In this study, effects of polymer-coated silica NPs used in LTS were investigated in human brain endothelial cells (ECs) and blood-brain barrier models. In the co-culture setting with ECs and pericytes, only the cell type directly exposed to NPs displayed a time-dependent internalization. No transfer of NPs between the two cell types was observed. Cell viability was decreased relatively to NP exposure duration and concentration. Protein expression of the nuclear factor ĸ-light-chain-enhancer of activated B cells and various endothelial adhesion molecules indicated no initiation of inflammation or activation of ECs after NP exposure. Differentiation of CD34+ ECs into brain-like ECs co-cultured with pericytes, blood-brain barrier (BBB) characteristics were obtained. The established endothelial layer reduced the passage of integrity tracer molecules. NP exposure did not result in alterations of junctional proteins, BBB formation or its integrity. In a 3-dimensional setup with an endothelial tube formation and tight junctions, barrier formation was not disrupted by the NPs and NPs do not seem to cross the blood-brain barrier. Our findings suggest that these polymer-coated silica NPs do not damage the BBB.

Albumin-PEG-Based Biomaterial for Laser-Tissue Soldering and Its Real-Time Monitoring With Swept-Source Optical Coherence Tomography.

The study presents a noninvasive, real-time monitoring technique for the cross-sectional imaging of the laser-tissue soldering process with a swept-source optical coherence tomography (SSOCT) system. The study also aims at performing a comparative study of the laser-tissue soldering (LTS) process using optimized compositions of albumin as solder biomaterials. The experimental study was conducted both ex vivo and in vivo to assess the superiority of the LTS process over conventional methods using a noninvasive imaging tool. In our attempt to combine the two techniques into one diagnostic tool, we have used the SSOCT system for a thoroughgoing investigation of the process in real-time. Laser-assisted tissue soldering was performed using a pulsed near-infrared (NIR) laser with a central wavelength of 980 nm, an output power of 5 W, and beam diameter (1/e 2 ) of 6 mm. Here, the SSOCT system has been utilized to observe and analyze the transitions taking place in real-time without disrupting the process. For the comparative study, we have used serum albumin in a 70% w/v concentration and albumin-PEG conjugate in a 6:1 ratio as soldering materials. Different stages of the laser interaction process were monitored with OCT B-scans of the incision area. Also, the basis of biomaterial-tissue interaction was studied with the help of Fourier-transform infrared spectroscopy (FTIR) analysis of the soldering materials. FTIR spectrum alludes to the fact that the intertwining of the soldering biomaterial with tissue collagen creates adhesion. Biomaterial serum albumin with 70% w/v concentration as soldering material demonstrates complete sealing of tissue at the incision with 3 minutes of laser irradiation. SSOCT B-scans have been useful in imaging the incision noninvasively at different stages. Both ex vivo and in vivo demonstration of the LTS process were presented with a clinical resemblance. OCT can be of great value to determine the wound contraction in case of incisional wounds or sealed wounds produced by the LTS procedure. Also, volumetric measurements of percentage reduction in wound area can be done with OCT. SSOCT system can be a potential imaging modality for real-time noninvasive imaging of surgical procedures like LTS. Lasers Surg. Med. © 2021 Wiley Periodicals LLC.

Effects of dyes on tensile strength and thermal damage of laser biological tissue soldering

Laser tissue welding is a hot issue in surgical research due to its advantages of non-contact, instant water tightness, no suture removal, no rejection and anti-infection. However, the contradiction between strength and thermal damage has not been solved completely. The addition of dye can solve the problem. Therefore, in order to improve the welding strength and quality, this paper studies the influence of different position and concentration of dye on the welding strength and determines the optimal concentration and applied position. Two kinds of flux were prepared, which were based on bovine serum albumin solution and stained with indocyanine green and methylene blue respectively. Comparing the welding effect of flux, the indocyanine green group is more remarkable. When the concentration of indocyanine green is 2.0 mg/mL, the maximum tensile strength reaches 19.32 ± 1.22 N/cm2, which is significantly higher than that of the control group without flux. When the flux is applied to the front side, the tensile strength is higher than the reverse side group. Two kinds of flux can effectively reduce the thermal damage. Our study demonstrates that indocyanine green and methylene blue are significant organic chromophores in laser welding process, which can promote the efficiency of photo-thermal conversion, improve welding strength and reduce thermal damage.

In Vitro Feasibility Analysis of a New Sutureless Wound-Closure System Based on a Temperature-Regulated Laser and a Transparent Collagen Membrane for Laser Tissue Soldering (LTS).

For the post-surgical treatment of oral wounds and mucosal defects beyond a certain size, the gold standard is still an autologous skin or mucosal graft in combination with complex suturing techniques. A variety of techniques and biomaterials has been developed for sutureless wound closure including different tissue glues or collagen patches. However, no wound covering that enables for sutureless fixation has yet been introduced. Thus, a new system was developed that allows for sutureless wound covering including a transparent collagen membrane, which can be attached to the mucosa using a specially modified 2λ laser beam with integrated temperature sensors and serum albumin as bio-adhesive. The sutureless wound closure system was tested for its applicability and its cytocompatibility by an established in vitro model in the present study. The feasibility of the laser system was tested ex vivo on a porcine palate. The in vitro cytocompatibility tests excluded the potential release of toxic substances from the laser-irradiated collagen membrane and the bio-adhesive. The results of the ex vivo feasibility study using a porcine palate revealed satisfactory mean tensile strength of 1.2–1.5 N for the bonding of the membrane to the tissue fixed with laser of 980 nm. The results suggest that our newly developed laser-assisted wound closure system is a feasible approach and could be a first step on the way towards a laser based sutureless clinical application in tissue repair and oral surgery.

Terahertz three-dimensional monitoring of nanoparticle-assisted laser tissue soldering

In view of minimally-invasive clinical interventions, laser tissue soldering assisted by plasmonic nanoparticles is emerging as an appealing concept in surgical medicine, holding the promise of surgeries without sutures. Rigorous monitoring of the plasmonically-heated solder and the underlying tissue is crucial for optimizing the soldering bonding strength and minimizing the photothermal damage. To this end, we propose a non-invasive, non-contact, and non-ionizing modality for monitoring nanoparticle-assisted laser-tissue interaction and visualizing the localized photothermal damage, by taking advantage of the unique sensitivity of terahertz radiation to the hydration level of biological tissue. We demonstrate that terahertz radiation can be employed as a versatile tool to reveal the thermally-affected evolution in tissue, and to quantitatively characterize the photothermal damage induced by nanoparticle-assisted laser tissue soldering in three dimensions. Our approach can be easily extended and applied across a broad range of clinical applications involving laser-tissue interaction, such as laser ablation and photothermal therapies.

Polymer-coated nanoparticles and their effects on mitochondrial function in brain endothelial cells

Laser tissue soldering is a novel treatment method for injuries of hollow organs such as cerebrovascular aneurysms. Nanomaterials contained in the solder are foreign to the body. Hence, it is indispensable to carefully examine possible adverse effects prior to introducing this technique. The aim of this study was to characterize the impact of different concentrations of polymer-coated silica nanoparticles (NPs) on mitochondrial function and integrity of brain endothelial cells using the rat brain capillary endothelial cell line rBCEC4. At maximal capacity, NP exposure resulted in a decrease in the oxygen consumption rate whereas glycolysis was not affected. In combination with a stressor, i.e. lack of glucose in the medium, NP exposure interfered primarily with glycolytic ATP generation rather than oxidative phosphorylation. Furthermore, NPs caused a metabolic shift towards a stressed phenotype, exhibiting increased levels of the oxygen consumption rate and the extracellular acidification rate compared to untreated controls. Overall, mitochondrial mass, distribution and morphology as well as intracellular ATP content were not altered. The mitochondrial membrane potential was increased after exposure to the highest NP concentration and the content of proteins involved in mitochondrial dynamics was changed slightly, indicating possible modifications of the fusion / fission balance.In conclusion, PCL-NP exposure changed mitochondrial respiration, especially under glucose deprivation, but did not affect mitochondrial morphology and distribution. Further studies are needed to investigate whether the functional effects are transient or long-term as this will be crucial for the use of these NPs in laser tissue soldering.

Effects of gold and PCL- or PLLA-coated silica nanoparticles on brain endothelial cells and the blood-brain barrier.

Nanomedicine is a constantly expanding field, facilitating and improving diagnosis and treatment of diseases. As nanomaterials are foreign objects, careful evaluation of their toxicological and functional aspects prior to medical application is imperative. In this study, we aimed to determine the effects of gold and polymer-coated silica nanoparticles used in laser tissue soldering on brain endothelial cells and the blood–brain barrier using rat brain capillary endothelial cells (rBCEC4). All types of nanoparticles were taken up time-dependently by the rBCEC4 cells, albeit to a different extent, causing a time- and concentration-dependent decrease in cell viability. Nanoparticle exposure did not change cell proliferation, differentiation, nor did it induce inflammation. rBCEC4 cells showed blood–brain barrier characteristics including tight junctions. None of the nanoparticles altered the expression of tight junctions or impaired the blood–brain barrier permeability. The findings suggest that effects of these nanoparticles on the metabolic state of cells have to be further characterized before use for medical purposes.

吲哚菁绿与亚甲基蓝对生物组织激光钎焊强度及热损伤的影响

吲哚菁绿与亚甲基蓝对生物组织激光钎焊强度及热损伤的影响

Robot-assisted laser tissue soldering system.

Fast and reliable incision closure is critical in any surgical intervention. Common solutions are sutures and clips or adhesives, but they all present difficulties. These difficulties are especially pronounced in classical and robot-assisted minimally-invasive interventions. Laser soldering methods present a promising alternative, but their reproducibility is limited. We present a system that combines a previously reported laser soldering system with a robotic system, and demonstrate its feasibility on the incision-closure of ex-vivo mice skins. In this demonstration, we measured tearing forces of ~2.5N, 73% of the tearing force of a mouse skin without an incision. This robot-assisted laser soldering technique has the potential to make laser tissue soldering more reproducible and revolutionize surgical tissue bonding.

Influence of laser wavelength and beam profile on the coagulation depth in a soft tissue phantom model

In laser tissue soldering (LTS), a protein solution is thermally denatured and cross-linked to obtain a strong bond between tissues or tissue and a wound dressing. However, if the extension of the heat-affected zone is too large, wound healing is impaired by thermal tissue injuries. Therefore, heat input and coagulation depth have to be limited. We investigate the influence of wavelength and beam profile on coagulation depth using a soft tissue phantom in case of weakly (980 nm) and strong (1540 nm) absorbed laser radiation. The soft tissue phantom is doped with polystyrene (PS) beads to obtain similar scattering properties as natural tissue. The propagation of the laser radiation in the phantom is simulated by Monte–Carlo method and the optical penetration (OPD) depth calculated from isophotes. The simulation results are compared with the experimental determination of the coagulation volume. The results reveal that scattering effect of tissues on laser radiation increases the losses of a Gaussian beam profile laterally leading to a half-sphere coagulation volume. The depth profile of the coagulation follows approximately the intensity distribution of the laser beams as long as scattering effects are weak. As scattering effects become significant, as for 980-nm radiation, the intensity distribution of the laser beam in the tissue deviates from the original one, leading to different profile of the coagulation depth.

Albumin solder covalently bound to a polymer membrane: New approach to improve binding strength in laser tissue soldering in-vitro.

Laser tissue soldering (LTS) based on indocyanine green (ICG)-mediated heat-denaturation of proteins might be a promising alternative technique for micro-suturing, but up to now the problem of too weak shear strength of the solder welds in comparison to sutures is not solved. Earlier reports gave promising results showing that solder supported by carrier materials can enhance the cohesive strength of the liquid solder. In these studies, the solder was applied to the carriers by dip coating. Higher reliability of the connection between the solder and the carrier material is expected when the solder is bound covalently to the carrier material. In the present study a poly(ether imide) (PEI) membrane served as carrier material and ICG-supplemented albumin as solder substrate. The latter was covalently coupled to the carrier membrane under physiological conditions to prevent structural protein changes. As laser source a diode continuous-wave laser emitting at 808 nm with intensities between 250 mW and 1500 mW was utilized. The albumin functionalized carrier membrane was placed onto the tunica media of explanted pig thoracic aortae forming an overlapping area of approximately 0.5×0.5 cm2. All tests were performed in a dry state to prevent laser light absorption by water. Infrared spectroscopy, spectro-photometrical determination of the secondary and primary amine groups after acid orange II staining, contact angle measurements, and atomic force microscopy proved the successful functionalization of the PEI membrane with albumin. A laser power of 450 mW LTS could generate a membrane-blood vessel connection which was characterized by a shear strength of 0.08±0.002 MPa, corresponding to 15% of the tensile strength of the native blood vessel. Theoretically, an overlapping zone of 4.1 mm around the entire circumference of the blood vessel could have provided shear strength of the PEI membrane-blood vessel compound identical to the tensile strength of the native blood vessel. These in-vitro results confirmed the beneficial effects of solder reinforcement by carrier membranes, and suggest LTS with covalently bound solders on PEI substrates for further studies in animal models.

Evaluation of Laser Tissue Welding and Laser-Tissue Soldering for Mucosal and Vascular Repair.

Context:Laser tissue bonding (LTB) is believed to have certain advantages over conventional sutures such as fluid-tight closure and minimal scarring and fibrosis.Aim:The aim of the present study was to evaluate the bond strength of laser tissue welding and laser tissue soldering in mucosal and vascular repair.Materials and Methods:A total of 85 samples of bovine oral mucosa and 85 bovine aortas were bonded using a CO2 laser and different laser powers. Human serum albumin was used as solder. The breaking load for mucosal samples and the bursting pressure for aorta samples were evaluated. Few specimens were evaluated histologically for thermal damage and other microscopic changes.Statistical Methods:Two-way ANOVA was performed as the data were normally distributed and analyzed for significant differences between the groups. This was followed by Simple Main effects (Tuckey's post hoc test) to determine the individual variation between groups and also the significant differences within the groups.Results:Significantly higher values of breaking load (44.2 ± 3.03 g) and bursting pressure (70.8 ± 12.33 mmHg) were noted when 50% albumin was used. When reinforcing sutures were given the bond strength was further increased (68.0 ± 4.0 g for breaking load) (108.0 ± 12.56 mmHg for bursting pressure). Microscopically, a bridge of solder coagulum formed across the wound. Thermal damage was restricted to the top layers only although it did extend much more laterally adjacent to the wound edges. Few areas of vacuolization and carbonization were seen.Conclusion:LTB seems to be a promising new method of wound closure and warrants further evaluation in the form of in vivo and clinical studies.

Spatiotemporal modeling of laser tissue soldering using photothermal nanocomposites.

Laser tissue soldering using photothermal solders is a technology that facilitates rapid sealing using heat-induced changes in the tissue and the solder material. The solder material is made of gold nanorods embedded in a protein matrix patch that can be placed over the tissue rupture site and heated with a laser. Although laser tissue soldering is an attractive approach for surgical repair, potential photothermal damage can limit the success of this approach. Development of predictive mathematical models of photothermal effects including cell death, can lead to more efficient approaches in laser-based tissue repair. We describe an experimental and modeling investigation into photothermal solder patches for sealing porcine and mouse cadaver intestine sections using near-infrared laser irradiation. Spatiotemporal changes in temperature were determined at the surface as well as various depths below the patch. A mathematical model, based on the finite element method, predicts the spatiotemporal temperature distribution in the patch and surrounding tissue, as well as concomitant cell death in the tissue is described. For both the porcine and mouse intestine systems, the model predicts temperatures that are quantitatively similar to the experimental measurements with the model predictions of temperature increase often being within a just a few degrees of experimental measurements. This mathematical model can be employed to identify optimal conditions for minimizing healthy cell death while still achieving a strong seal of the ruptured tissue using laser soldering. Lasers Surg. Med. 50:143-152, 2018. © 2017 Wiley Periodicals, Inc.

Effects of silica nanoparticle exposure on mitochondrial function during neuronal differentiation

BackgroundNanomedicine offers a promising tool for therapies of brain diseases, but potential effects on neuronal health and neuronal differentiation need to be investigated to assess potential risks. The aim of this study was to investigate effects of silica-indocyanine green/poly (ε-caprolactone) nanoparticles (PCL-NPs) engineered for laser tissue soldering in the brain before and during differentiation of SH-SY5Y cells. Considering adaptations in mitochondrial homeostasis during neuronal differentiation, metabolic effects of PCL-NP exposure before and during neuronal differentiation were studied. In addition, kinases of the PI3 kinase (PI3-K/Akt) and the MAP kinase (MAP-K/ERK) pathways related to neuronal differentiation and mitochondrial function were investigated.ResultsDifferentiation resulted in a decrease in the cellular respiration rate and the extracellular acidification rate (ECAR). PCL-NP exposure impaired mitochondrial function depending on the time of exposure. The cellular respiration rate was significantly reduced compared to differentiated controls when PCL-NPs were given before differentiation. The shift in ECAR was less pronounced in PCL-NP exposure during differentiation. Differentiation and PCL-NP exposure had no effect on expression levels and the enzymatic activity of respiratory chain complexes. The activity of the glycolytic enzyme phosphofructokinase was significantly reduced after differentiation with the effect being more pronounced after PCL-NP exposure before differentiation. The increase in mitochondrial membrane potential observed after differentiation was not found in SH-SY5Y cells exposed to PCL-NPs before differentiation. The cellular adenosine triphosphate (ATP) production significantly dropped during differentiation, and this effect was independent of the PCL-NP exposure. Differentiation and nanoparticle exposure had no effect on superoxide levels at the endpoint of the experiments. A slight decrease in the expression of the neuronal differentiation markers was found after PCL-NP exposure, but no morphological variation was observed.ConclusionsPCL-NP exposure affects mitochondrial function depending on the time of exposure before and during neuronal differentiation. PCL-NP exposure during differentiation was associated with impaired mitochondrial function, which may affect differentiation. Considering the importance of adaptations in cellular respiration for neuronal differentiation and function, further studies are needed to unravel the underlying mechanisms and consequences to assess the possible risks including neurodegeneration.

Temperature-controlled laser-soldering system and its clinical application for bonding skin incisions.

Laser tissue soldering is a method of repairing incisions. It involves the application of a biological solder to the approximated edges of the incision and heating it with a laser beam. A pilot clinical study was carried out on 10 patients who underwent laparoscopic cholecystectomy. Of the four abdominal incisions in each patient, two were sutured and two were laser soldered. Cicatrization, esthetical appearance, degree of pain, and pruritus in the incisions were examined on postoperative days 1, 7, and 30. The soldered wounds were watertight and healed well, with no discharge from these wounds or infection. The total closure time was equal in both methods, but the net soldering time was much shorter than suturing. There was no difference between the two types of wound closure with respect to the pain and pruritus on a follow-up of one month. Esthetically, the soldered incisions were estimated as good as the sutured ones. The present study confirmed that temperature-controlled laser soldering of human skin incisions is clinically feasible, and the results obtained were at least equivalent to those of standard suturing.

Cell Labeling and Targeting with Superparamagnetic Iron Oxide Nanoparticles.

Targeted delivery of cells and therapeutic agents would benefit a wide range of biomedical applications by concentrating the therapeutic effect at the target site while minimizing deleterious effects to off-target sites. Magnetic cell targeting is an efficient, safe, and straightforward delivery technique. Superparamagnetic iron oxide nanoparticles (SPION) are biodegradable, biocompatible, and can be endocytosed into cells to render them responsive to magnetic fields. The synthesis process involves creating magnetite (Fe3O4) nanoparticles followed by high-speed emulsification to form a poly(lactic-co-glycolic acid) (PLGA) coating. The PLGA-magnetite SPIONs are approximately 120 nm in diameter including the approximately 10 nm diameter magnetite core. When placed in culture medium, SPIONs are naturally endocytosed by cells and stored as small clusters within cytoplasmic endosomes. These particles impart sufficient magnetic mass to the cells to allow for targeting within magnetic fields. Numerous cell sorting and targeting applications are enabled by rendering various cell types responsive to magnetic fields. SPIONs have a variety of other biomedical applications as well including use as a medical imaging contrast agent, targeted drug or gene delivery, diagnostic assays, and generation of local hyperthermia for tumor therapy or tissue soldering.

In vivo laser assisted microvascular repair and end‐to‐end anastomosis by means of indocyanine green‐infused chitosan patches: A pilot study

Laser-based repairing techniques offer several advantages respect to standard suturing in microsurgery. In this work we evaluate the applicability and feasibility of two innovative laser-based approaches for microvascular repair and anastomoses: (1) laser-assisted vascular repair (LAVR); (2) laser-assisted end-to-end vascular anastomosis (LAVA). All these procedures have been executed by the use of diode laser irradiation and chitosan-patches infused with Indocyanine Green (ICG). Experiments were performed on 30 rabbits. Twenty animals underwent LAVR and 10 end-to-end LAVA procedures. In the LAVR group, a 5-mm longitudinal cut was performed on the common carotid artery (CCA), then an ICG-infused chitosan patch was topically applied and laser-soldered over the arterial lesion. In the LAVA group the end-to-end anastomosis was executed on CCA by means of application of the three interrupted sutures and subsequent laser soldering of the ICG-infused patch. Animals underwent different follow-up periods (2, 7, 30, and 90 days). At the end of every follow-up, the animals were re-anesthetized and a microdoppler analysis was performed in order to check patency of the treated vessels. Then soldered segments were excised and subjected to histological and ultrastructural evaluations. At the end of surgery no bleeding from the treated segment was observed; all the treated vessels were patent. At the end of follow-up periods, no signs of perivascular haemorrhage were found. An intraoperative microdoppler evaluation assessed the patency of all the treated vessels. Histology showed a good reorganization of the vascular wall structures and an early endothelial regeneration was observed by SEM. Our study demonstrated the efficacy of laser tissue soldering by means of ICG-infused chitosan patches for the in vivo repairing of microvascular lesions and end-to-end anastomoses. This approach offers several advantages over conventional suturing methods and is technically easy to perform, minimizing the surgical trauma to vessels.