Time-resolved Macromolecular Crystallography Research Articles

From femtoseconds to minutes: time-resolved macromolecular crystallography at XFELs and synchrotrons.

Over the last decade, the development of time-resolved serial crystallography (TR-SX) at X-ray free-electron lasers (XFELs) and synchrotrons has allowed researchers to study phenomena occurring in proteins on the femtosecond-to-minute timescale, taking advantage of many technical and methodological breakthroughs. Protein crystals of various sizes are presented to the X-ray beam in either a static or a moving medium. Photoactive proteins were naturally the initial systems to be studied in TR-SX experiments using pump-probe schemes, where the pump is a pulse of visible light. Other reaction initiations through small-molecule diffusion are gaining momentum. Here, selected examples of XFEL and synchrotron time-resolved crystallography studies will be used to highlight the specificities of the various instruments and methods with respect to time resolution, and are compared with cryo-trapping studies.

The TR-icOS setup at the ESRF: time-resolved microsecond UV-Vis absorption spectroscopy on protein crystals.

The technique of time-resolved macromolecular crystallography (TR-MX) has recently been rejuvenated at synchrotrons, resulting in the design of dedicated beamlines. Using pump-probe schemes, this should make the mechanistic study of photoactive proteins and other suitable systems possible with time resolutions down to microseconds. In order to identify relevant time delays, time-resolved spectroscopic experiments directly performed on protein crystals are often desirable. To this end, an instrument has been built at the icOS Lab (in crystallo Optical Spectroscopy Laboratory) at the European Synchrotron Radiation Facility using reflective focusing objectives with a tuneable nanosecond laser as a pump and a microsecond xenon flash lamp as a probe, called the TR-icOS (time-resolved icOS) setup. Using this instrument, pump-probe spectra can rapidly be recorded from single crystals with time delays ranging from a few microseconds to seconds and beyond. This can be repeated at various laser pulse energies to track the potential presence of artefacts arising from two-photon absorption, which amounts to a power titration of a photoreaction. This approach has been applied to monitor the rise and decay of the M state in the photocycle of crystallized bacteriorhodopsin and showed that the photocycle is increasingly altered with laser pulses of peak fluence greater than 100 mJ cm-2, providing experimental laser and delay parameters for a successful TR-MX experiment.

Kilohertz serial crystallography with the JUNGFRAU detector at a fourth-generation synchrotron source.

Serial and time-resolved macromolecular crystallography are on the rise. However, beam time at X-ray free-electron lasers is limited and most third-generation synchrotron-based macromolecular crystallography beamlines do not offer the necessary infrastructure yet. Here, a new setup is demonstrated, based on the JUNGFRAU detector and Jungfraujoch data-acquisition system, that enables collection of kilohertz serial crystallography data at fourth-generation synchrotrons. More importantly, it is shown that this setup is capable of collecting multiple-time-point time-resolved protein dynamics at kilohertz rates, allowing the probing of microsecond to second dynamics at synchrotrons in a fraction of the time needed previously. A high-quality complete X-ray dataset was obtained within 1 min from lysozyme microcrystals, and the dynamics of the light-driven sodium-pump membrane protein KR2 with a time resolution of 1 ms could be demonstrated. To make the setup more accessible for researchers, downstream data handling and analysis will be automated to allow on-the-fly spot finding and indexing, as well as data processing.

Practical considerations for the analysis of time-resolved x-ray data.

The field of time-resolved macromolecular crystallography has been expanding rapidly after free electron lasers for hard x rays (XFELs) became available. Techniques to collect and process data from XFELs spread to synchrotron light sources. Although time-scales and data collection modalities can differ substantially between these types of light sources, the analysis of the resulting x-ray data proceeds essentially along the same pathway. At the base of a successful time-resolved experiment is a difference electron density (DED) map that contains chemically meaningful signal. If such a difference map cannot be obtained, the experiment has failed. Here, a practical approach is presented to calculate DED maps and use them to determine structural models.

Advances and challenges in time-resolved macromolecular crystallography.

Conformational changes within biological macromolecules control a vast array of chemical reactions in living cells. Time-resolved crystallography can reveal time-dependent structural changes that occur within protein crystals, yielding chemical insights in unparalleled detail. Serial crystallography approaches developed at x-ray free-electron lasers are now routinely used for time-resolved diffraction studies of macromolecules. These techniques are increasingly being applied at synchrotron radiation sources and to a growing diversity of macromolecules. Here, we review recent progress in the field, including visualizing ultrafast structural changes that guide the initial trajectories of light-driven reactions as well as capturing biologically important conformational changes on slower time scales, for which bacteriorhodopsin and photosystem II are presented as illustrative case studies.

Time-resolved macromolecular crystallography: no longer a niche pursuit?

Time-resolved macromolecular crystallography: no longer a niche pursuit?

Time-Resolved Macromolecular Crystallography at Pulsed X-ray Sources.

The focus of structural biology is shifting from the determination of static structures to the investigation of dynamical aspects of macromolecular function. With time-resolved macromolecular crystallography (TRX), intermediates that form and decay during the macromolecular reaction can be investigated, as well as their reaction dynamics. Time-resolved crystallographic methods were initially developed at synchrotrons. However, about a decade ago, extremely brilliant, femtosecond-pulsed X-ray sources, the free electron lasers for hard X-rays, became available to a wider community. TRX is now possible with femtosecond temporal resolution. This review provides an overview of methodological aspects of TRX, and at the same time, aims to outline the frontiers of this method at modern pulsed X-ray sources.

A short history of structure based research on the photocycle of photoactive yellow protein.

The goals of time-resolved macromolecular crystallography are to extract the molecular structures of the reaction intermediates and the reaction dynamics from time-resolved X-ray data alone. To develop the techniques of time-resolved crystallography, biomolecules with special properties are required. The Photoactive Yellow Protein is the most sparkling of these.

Protein energy landscapes determined by five-dimensional crystallography

Free-energy landscapes decisively determine the progress of enzymatically catalyzed reactions [Cornish-Bowden (2012), Fundamentals of Enzyme Kinetics, 4th ed.]. Time-resolved macromolecular crystallography unifies transient-state kinetics with structure determination [Moffat (2001), Chem. Rev. 101, 1569-1581; Schmidt et al. (2005), Methods Mol. Biol. 305, 115-154; Schmidt (2008), Ultrashort Laser Pulses in Medicine and Biology] because both can be determined from the same set of X-ray data. Here, it is demonstrated how barriers of activation can be determined solely from five-dimensional crystallography, where in addition to space and time, temperature is a variable as well [Schmidt et al. (2010), Acta Cryst. A66, 198-206]. Directly linking molecular structures with barriers of activation between them allows insight into the structural nature of the barrier to be gained. Comprehensive time series of crystallographic data at 14 different temperature settings were analyzed and the entropy and enthalpy contributions to the barriers of activation were determined. One hundred years after the discovery of X-ray scattering, these results advance X-ray structure determination to a new frontier: the determination of energy landscapes.

Mix and Inject: Reaction Initiation by Diffusion for Time-Resolved Macromolecular Crystallography

Time-resolved macromolecular crystallography unifies structure determination with chemical kinetics, since the structures of transient states and chemical and kinetic mechanisms can be determined simultaneously from the same data. To start a reaction in an enzyme, typically, an initially inactive substrate present in the crystal is activated. This has particular disadvantages that are circumvented when active substrate is directly provided by diffusion. However, then it is prohibitive to use macroscopic crystals because diffusion times become too long. With small micro- and nanocrystals diffusion times are adequately short for most enzymes and the reaction can be swiftly initiated. We demonstrate here that a time-resolved crystallographic experiment becomes feasible by mixing substrate with enzyme nanocrystals which are subsequently injected into the X-ray beam of a pulsed X-ray source.

The kinetic dose limit in room-temperature time-resolved macromolecular crystallography.

Protein X-ray structures are determined with ionizing radiation that damages the protein at high X-ray doses. As a result, diffraction patterns deteriorate with the increased absorbed dose. Several strategies such as sample freezing or scavenging of X-ray-generated free radicals are currently employed to minimize this damage. However, little is known about how the absorbed X-ray dose affects time-resolved Laue data collected at physiological temperatures where the protein is fully functional in the crystal, and how the kinetic analysis of such data depends on the absorbed dose. Here, direct evidence for the impact of radiation damage on the function of a protein is presented using time-resolved macromolecular crystallography. The effect of radiation damage on the kinetic analysis of time-resolved X-ray data is also explored.

Cluster Analysis of Time-Dependent Crystallographic Data: Direct Identification of Time-Independent Structural Intermediates

The initial output of a time-resolved macromolecular crystallography experiment is a time-dependent series of difference electron density maps that displays the time-dependent changes in underlying structure as a reaction progresses. The goal is to interpret such data in terms of a small number of crystallographically refinable, time-independent structures, each associated with a reaction intermediate; to establish the pathways and rate coefficients by which these intermediates interconvert; and thereby to elucidate a chemical kinetic mechanism. One strategy toward achieving this goal is to use cluster analysis, a statistical method that groups objects based on their similarity. If the difference electron density at a particular voxel in the time-dependent difference electron density (TDED) maps is sensitive to the presence of one and only one intermediate, then its temporal evolution will exactly parallel the concentration profile of that intermediate with time. The rationale is therefore to cluster voxels with respect to the shapes of their TDEDs, so that each group or cluster of voxels corresponds to one structural intermediate. Clusters of voxels whose TDEDs reflect the presence of two or more specific intermediates can also be identified. From such groupings one can then infer the number of intermediates, obtain their time-independent difference density characteristics, and refine the structure of each intermediate. We review the principles of cluster analysis and clustering algorithms in a crystallographic context, and describe the application of the method to simulated and experimental time-resolved crystallographic data for the photocycle of photoactive yellow protein.

The Atomistic Mechanism of Conformational Transition in Adenylate Kinase: A TEE-REX Molecular Dynamics Study

We report on an atomistic molecular dynamics simulation of the complete conformational transition of Escherichia coli adenylate kinase (ADK) using the recently developed TEE-REX algorithm. Two phases characterize the transition pathway of ADK, which folds into the domains CORE and LID and the AMP binding domain AMPbd. Starting from the closed conformation, half-opening of the AMPbd precedes a partially correlated opening of the LID and AMPbd, defining the second phase. A highly stable salt bridge D118-K136 at the LID-CORE interface, contributing substantially to the total nonbonded LID-CORE interactions, was identified as a major factor that stabilizes the open conformation. Alternative transition pathways, such as AMPbd opening following LID opening, seem unlikely, as full transition events were not observed along this pathway. The simulation data indicate a high enthalpic penalty, possibly obstructing transitions along this route.

Local protein flexibility as a prerequisite for reversible chromophore isomerization in α-phycoerythrocyanin

Phycoerythrocyanin is the only cyanobacterial phycobiliprotein containing phycoviolobilin as a chromophore. The phycoviolobilin chromophore is photo-reactive; upon irradiation, the chromophore undergoes a Z/E-isomerization involving the rotation of pyrrole-ring D. We have determined the structure of trimeric phycoerythrocyanin at three different experimental settings: monochromatically at 110 K and 295 K as well as with the Laue method at 288 K. Based on their chemical structures, the restraints for the phycoviolobilin of the α-subunit and for the phycocyanobilin chromophores of the β-subunit were newly generated, which allows a chemically meaningful refinement of both chromophores. All three phycoerythrocyanin structures are very similar; the subunits match within 0.5 Å. The detailed comparison of the data obtained with the different measurements provided information about the protein properties around the phycoviolobilin chromophore. For the first time, crystals of a phycobilisome protein are used successfully with the Laue technique. This paves the way for time-resolved macromolecular crystallography, which is able to elucidate the exact mechanisms of the phycoviolobilin photoactivity including the protein involvement.

Analytical trapping: extraction of time-independent structures from time-dependent crystallographic data

All chemical and biological reactions involve atomic motion, embodied in dynamic structural changes. Identifying these changes is the goal of time-resolved crystallography. The “raw” output of a time-resolved macromolecular crystallography experiment is the time-dependent set of difference electron density maps that span the desired time range and display the time-dependent changes in density (and underlying structure) as the reaction progresses. The goal is to interpret such data in terms of a small number of crystallographically refinable, time-independent structures, each associated with a reaction intermediate; to establish the pathways and rate coefficients by which the intermediates interconvert; and thus to establish a chemical kinetic mechanism. We review briefly the various strategies that may be used to achieve this goal and concentrate on two promising advances: singular value decomposition and cluster analysis. The strategies are illustrated by using data on the photocycle of the bacterial blue light photoreceptor, photoactive yellow protein.

The frontiers of time-resolved macromolecular crystallography: movies and chirped X-ray pulses

Three important frontiers of ultrafast time-resolved macromolecular crystallography are presented: extension of this technique to other biological systems; further developments in the elucidation of mechanism through the analysis of time-dependent movies to extract the underlying, time-independent, intermediate structures; and enhanced time resolution. The last is intimately linked with the nature of the pump-probe experiment itself, with the sources of random and, particularly, systematic experimental error, and with the factors that contribute to overall time resolution. All experiments to date have utilized the unchirped X-ray pulses that are emitted by synchrotron sources. Chirped pulses offer certain advantages for ultrafast X-ray experiments such as those based on Laue diffraction. An energy-chirped pulse maps photon energy into time; a Laue diffraction experiment maps photon energy into detector space. Hence, a Laue experiment with an energy-chirped pulse maps time into space. The proposed sub-picosecond photon source could provide an excellent source of intense, chirped hard X-rays for such experiments.

Time-resolved macromolecular crystallography: molecular movies?

Time-resolved macromolecular crystallography: molecular movies?

Time-Resolved Macromolecular Crystallography

Rapid x-ray characterization of structure and innovative ways of initiating and controlling reactions are shedding new light on protein function by enabling the visualization of macromolecules in action.

Photolysis of the carbon monoxide complex of myoglobin: nanosecond time-resolved crystallography.

The biological activity of macromolecules is accompanied by rapid structural changes. The photosensitivity of the carbon monoxide complex of myoglobin was used at the European Synchrotron Radiation Facility to obtain pulsed, Laue x-ray diffraction data with nanosecond time resolution during the process of heme and protein relaxation after carbon monoxide photodissociation and during rebinding. These time-resolved experiments reveal the structures of myoglobin photoproducts, provide a structural foundation to spectroscopic results and molecular dynamics calculations, and demonstrate that time-resolved macromolecular crystallography can elucidate the structural bases of biochemical mechanisms on the nanosecond time scale.

Time-resolved macromolecular crystallography

Reaction mechanisms in chemistry and biochemistry involve structural change, not merely static structure (1). These structural changes can be very rapid, spanning the time range from femtoseconds to seconds and above. We have developed and applied timeresolved X-ray crystallography(2,3) to monitor directly the changes in electron density and hence in atomic location, as biological macromolecules respond to light.